P/N 034B-060-00401H 034B-060-00401HU 3. ELECTRICAL SPECIFICATIONS: IMPEDANCE: 75 OHMS. FREQUENCY RANGE: DC-4.5GHz. RETURN LOSS (ON MID-LAYER OF 2.4mm PCB): <-15dB UP TO 3.0GHz, <-10dB UP TO 4.5 GHz. 4X 4. COMPLIANT TO SMPTE 424M (3G-SDI) STANDARD. DESCRIPTION F REVISED PER ECR-ER28303 DESCRIPTION SINGLE PACK BULK PACK .051 1.30 .004 M A B BY APPD DATE CTC 2. FINISH SPECIFICATIONS: BODY: .000015 MIN GOLD PER ASTM B488 OVER .000080 MIN NICKEL PER AMS-QQ-N-290. CONTACT: .000030 MIN GOLD PER ASTM B488 OVER .000080 MIN NICKEL PER AMS-QQ-N-290. NUT: .000100 MIN NICKEL PER AMS-QQ-N-290 OVER COPPER FLASH PER ASTM B734. REV CY 11/03/10 NOTES: UNLESS OTHERWISE SPECIFIED 1. MATERIAL SPECIFICATIONS: BODY & NUT: BRASS PER ASTM B16. CONTACT: COPPER ALLOY. INSULATOR: TEFLON PER ASTM D1710. QTY 1 600 .039 1.00 A 5. INTERFACE PER CECC 22230. ( .808 20.52 ) M5.5 X 0.5-6g 2 X .100 .256 6.50 .289 7.34 2.54 B .292 7.42 2 X .100 .146 3.71 2.54 PCB LAYOUT 4 X .118 3.00 4 X .025 .64 .254 6.45 .220 5.59 .670 17.02 +.002 +.05 .028 - .001 .71 - .03 4X .032 .81 CATALOG P/N: 034B-060-00401H ( 2 X .167 4.24 ) PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] .XXX [X.XX] ± .005 [0.13] .XXXX [X.XXX] ± .XXXX ANGLES: ± 2° SCALE: 3.5:1 THIRD ANGLE .278 7.06 ( 2 X .167 4.24 ) DMF026 B Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 CUSTOMER DRAWING DRAWN DW APPROVED WPM DATE APPROVED 04/29/08 Dcam DATE APPROVED 05/09/08 XXX DATE 05/07/08 DATE XX/XX/XX DIN 1.0/2.3 75 OHM JACK RIGHT ANGLE PCB MOUNT (RoHS COMPLIANT) A SD034B-060-00401H SHT 1 OF 1 REV F