CUSTOMER DRAWING REVISED PER ECO-12-013539 DATE: July 26, 2012 øC THREAD TYP 51.0 [2.01"] MAX øA THREAD TYP øB MAX TYP O RING - SILICONE TYP REV: A STRAIGHT ADAPTOR -00 1 3 4 2 D MAX F MAX E M G MAX AX 45º ADAPTOR -45 90º ADAPTOR -90 2012 Tyco Electronics Corporation. All rights reserved. TITLE: HEXASHIELD ADAPTOR FOR CODE 40 CONNECTORS, CONDUIT CLAMPING NUT Tyco Electronics Corporation 300 Constitution Drive Menlo Park, CA 94025 USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCH DIMENSIONS ARE SHOWN IN BRACKETS Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. DRAWN: CAGE CODE: IRT DATE: JUL 03 06090 REVISED PER ECR-12-013539 DOCUMENT NO. HEX40-AY-YY-AYY-C-YY FILE: Hex40_ay_yy_ayy_c_yy_a_ cd If this document is printed it becomes uncontrolled. Check for the latest revision. SCALE: NONE SHEET: 1 OF 4 CUSTOMER DRAWING REVISED PER ECO-12-013539 REV: A DATE: July 26, 2012 KIT DESCRIPTION ITEM 1 2 3 4 DESCRIPTION BODY ASSEMBLY CONDUIT ADAPTOR CONIC RING STAR MATERIAL ALUMINIUM ALLOY ALUMINIUM ALLOY ALUMINIUM ALLOY ALUMINIUM ALLOY TABLE OF DIMENSIONS Order Number 09 Shell Size Mil. Com. A 09 ØA Thread Class 6H M12 x 1 11 B 11 M15 x 1 13 C 13 M18 x 1 15 D 15 M22 x 1 17 E 17 M25 x 1 19 F 19 M28 x 1 21 G 21 M31 x 1 23 H 23 M34 x 1 25 J 25 M37 x 1 ØB Max 19.0 [0.75”] 22.0 [0.87”] 25.5 [1.00”] 30.5 [1.20”] 33.5 [1.32”] 37.0 [1.46”] 38.5 [1.52”] 42.0 [1.65”] 46.5 [1.83”] ØC Thread Class 6g M12 x 1 M15 x 1 M18 x 1 M22 x 1 M25 x 1 M28 x 1 M31 x 1 M34 x 1 M37 x 1 D Max 14.4 [.57] 35.5 [.59] 40.0 [.63] 14.5 [.65] 15.0 0[67] 15.5 [.69] 16.5 [.73] 17.0 [.75] 18.0 [.79] E Max 51.0 [2.01”] 51.5 [2.03”] 52.0 [2.05”] 53.0 [2.09”] 53.5 [2.11”] 54.0 [2.13”] 54.5 [2.15”] 55.5 [2.19”] 56.5 [2.22”] F Max 17.9 [.71] 40.0 [.77] 45.0 [.83] 20.5 [.89] 22.0 [.95] 23.5 [1.01] 25.5 [1.08] 27.0 [1.14] 28.5 [1.20] G Max 54.5 [2.15”] 56.0 [2.20”] 57.5 [2.26”] 59.0 [2.32”] 60.5 [2.38”] 62.0 [2.44”] 64.0 [2.52”] 65.5 [2.58”] 67.0 [2.64”] Ferrule Quantity Std. 1 Optional - 2 - 3 - 5 - 6 7 7 8 9 11 10 11/12/13/15 12 13/14/15/17/18 PART NUMBERING 2012 Tyco Electronics Corporation. All rights reserved. TITLE: HEXASHIELD ADAPTOR FOR CODE 40 CONNECTORS, CONDUIT CLAMPING NUT Tyco Electronics Corporation 300 Constitution Drive Menlo Park, CA 94025 USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCH DIMENSIONS ARE SHOWN IN BRACKETS Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. DRAWN: CAGE CODE: IRT DATE: JUL 03 06090 REVISED PER ECR-12-013539 DOCUMENT NO. HEX40-AY-YY-AYY-C-YY FILE: Hex40_ay_yy_ayy_c_yy_a_ cd If this document is printed it becomes uncontrolled. Check for the latest revision. SCALE: NONE SHEET: 2 OF 4 CUSTOMER DRAWING REVISED PER ECO-12-013539 REV: A DATE: July 26, 2012 HEX40 A B 00 21 A9 C DS - CONNECTOR CODE NUMBER HEX40 = MIL-C-38999 SERIES III AND IV - MATERIAL CODE: A = ALUMINIUM ALLOY - PLATING CODE: B = CADMIUM OLIVE DRAB TO SAE-AMS-QQ-P416 C = ELECTROLESS NICKEL TO SAE-AMS-C-26074 - BODY STYLE 00 = STRAIGHT 45 = 45º 90 = 90º - ORDER NUMBER - FERRULE QUANTITY CODE - C = CONDUIT CLAMPING NUT - DS = DRILLED STAR - SEE NOTE 2 APPLICATION - These adaptors are designed to be mounted on the following connectors: MIL-C-38999 Series III and IV - They are qualified to the Raychem specification RB-114, when installed on metallic Mil-Specification circular connectors only. - They are designed primarily for open wire bundle installations but are also designed to accept Raychem heat shrink moulded parts where sealing is required – see illustration. - The use of another “conduit” adaptor (e.g. a Tyco TXR40 with an H modification) is necessary to complete the assembly. MOULDED PART - Use in conjunction with the ferrules HET-A-0XX, which are purchased separately. Refer to HET-A-0XX S.C.D. for relevant selection details. INSTALLATION - See Installation Procedure RPIP-696-04 for straight adaptors. - See Installation Procedure RPIP-696-07 for 45° and 90° adaptors. PACKAGING - All components are supplied in a plastic bag. 2012 Tyco Electronics Corporation. All rights reserved. TITLE: HEXASHIELD ADAPTOR FOR CODE 40 CONNECTORS, CONDUIT CLAMPING NUT Tyco Electronics Corporation 300 Constitution Drive Menlo Park, CA 94025 USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCH DIMENSIONS ARE SHOWN IN BRACKETS Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. DRAWN: CAGE CODE: IRT DATE: JUL 03 06090 REVISED PER ECR-12-013539 DOCUMENT NO. HEX40-AY-YY-AYY-C-YY FILE: Hex40_ay_yy_ayy_c_yy_a_ cd If this document is printed it becomes uncontrolled. Check for the latest revision. SCALE: NONE SHEET: 3 OF 4 CUSTOMER DRAWING REVISED PER ECO-12-013539 REV: A DATE: July 26, 2012 NOTES! 1. Item 4 - Star - is not supplied with Hexashield Order Number 09. øH MAX 2. The DS option, illustrated below, is for a Drilled Star that is available on sizes 15 to 25 for “Standard” ferrule quantities only. This option is to allow unshielded wires to pass through the assembly. STAR SIZE ØH MAX 15 3.0 [0.12”] 17 6.0 [0.24”] 19 9.0 [0.35”] 21 12.0 [0.47”] 23 15.0 [0.59”] 25 18.0 [0.71”] 3. Where the ferrule quantities required are standard, the item 4 - Star - is also standard. If the optional quantity is selected then 2 items 4 will be supplied - one “split” and the other one standard*, See below for illustration. EXAMPLE: FERRULE QUANTITY CODE -A13 -A13 = -A10 SPLIT STAR + -A3 STANDARD STAR * On Order Number 19 only, the Optional Ferrule quantity of 8 uses a “standard” star also. 4. Assembly is to be permanently marked with Code Identity Number and Part Number. (e.g. 06090 HEX40-AB-00-21-A9-C) 2012 Tyco Electronics Corporation. All rights reserved. TITLE: HEXASHIELD ADAPTOR FOR CODE 40 CONNECTORS, CONDUIT CLAMPING NUT Tyco Electronics Corporation 300 Constitution Drive Menlo Park, CA 94025 USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCH DIMENSIONS ARE SHOWN IN BRACKETS Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. DRAWN: CAGE CODE: IRT DATE: JUL 03 06090 REVISED PER ECR-12-013539 DOCUMENT NO. HEX40-AY-YY-AYY-C-YY FILE: Hex40_ay_yy_ayy_c_yy_a_ cd If this document is printed it becomes uncontrolled. Check for the latest revision. SCALE: NONE SHEET: 4 OF 4