EMCORE 1782A

1782 DWDM High Power CW Source Laser
DATASHEET | DECEMBER 2012
FIBER OPTICS
The 1782 laser component is characterized for use as a CW optical source in
CATV and DWDM networks. The 1782 is dc-coupled with a built-in TEC,
thermistor, and monitor photodiode. The device is mounted in a 14-pin, OC-48
pinout compatible butterfly package with the optical isolator mounted on the TEC.
The 1782 incorporates a high efficiency coupling scheme to deliver 40 mW, 50
mW, 63 mW and 100 mW of CW optical power.
Performance Highlights
Applications
Parameter
Min
Typ
Max
Operating Case Temperature
-20
25
+65
DWDM
CATV
Wavelength
Free Space Optics
See Page 4
Optical Output Power
Features
Units
C
nm
40
50
63
100
-
-
mW
40
mA
40, 50, 63 & 100 mW Optical Output
Power
Threshold Current
-
-
Operating Current
-
-
650
mA
OC-48 Pinout Compatible
RIN
-
-
-163
dB/Hz
Telcordia Technologies™ GR-468
Compliant
RIN Through 65 km Fiber
-
-
-155
-157
dB/Hz
dB/Hz
SMSR
30
-
-
dB
Polarization Extiction Ratio (PMF pigtail)
17
-
-
dB
Monitor Photodiode
Optical Isolation
32
-
-
dB
RoHS
Optical Return Loss
40
-
-
dB
Standard
Enhanced
PM Fiber
-20°C to +65°C Operating Temperature
Range
| REV 2012.12
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
1782 DWDM High Power CW Source Laser
FIBER OPTICS
DATASHEET | DECEMBER 2012
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress
ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the
operational sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect
device reliability.
Symbol
Condition
Min
Max
Units
Operating Case Temperature
Parameter
TOP
continuous
-20
+65
C
Storage Temperature
TSTG
continuous
-40
+85
C
Laser Forward dc Current
Photodiode Reverse Voltage
Laser Reverse Voltage
TEC current
ESD
-
continuous
-
750
mA
VR,MPD
continuous
-
10
V
-
continuous
-
2
V
ITEC
continuous
-
1.7
A
-
HBM: R = 1500 , C = 100 pF
-500
500
V
Electrical/Optical Characteristics
Parameter
Symbol
Condition
Min
Typ
Max
Unit
Top
-
-20
25
65
C
Optical Output Power
PO
40 mW version, T = Tset, IF = IOP
50 mW version, T = Tset, IF = IOP
63 mW version, T = Tset, IF = IOP
100 mW version, T = Tset, IF = IOP
40
50
63
100
-
-
mW
Threshold Current
ITH
BOL
-
-
40
mA
Operating Current
IOP
BOL
-
-
500
mA
23
-
33
°C
-
-
2.5
V
Operating Case Temperature
1
Operating Laser Temperature
-
Laser Bias Forward Voltage
VOP
BOL, IF = IOP
Wavelength
OP
T = Tset, IF = IOP

T = Tset, IF = IOP, FWHM
-
-
1.0
MHz
ISO
-
32
-
-
dB
Spectral Linewidth
(1)
Optical Isolation
Optical Return Loss
See Page 4
nm
ORL
-
40
-
-
dB
Sidemode Suppression Ratio
SMSR
-
30
-
-
dB
Polarization Extinction Ratio
PER
IF = IOP
17
-
-
dB
Wavelength Drift Over TC Range
TOP
T = TOP
-
-
40
pm
Relative Intensity Noise
RIN
-
-
-
-163
dB/Hz
Monitor PD Current
IMPD
IF = IOP , VMPD = -5 V
100
-
2500
A
ID
IOP = 0 mA , VMPD = -5 V
-
-
0.2
A
Thermistor Resistance
RTH
TOP = 25 C
9.5
10.0
10.5
K
Thermistor Temp. Coefficients
Monitor PD Dark Current
TCTH
TOP = 25 C
-
-4.4
-
%/C
TEC Current
ITEC
-20C < TC < +65C
-1.0
-
+1.5
A
TEC Voltage
VTEC
-20C < TC < +65C
-2.0
-
+3.0
V
1. Linewidth () is calculated using this formula:  = RIN(f){16(D2L/c)2f2}-1
Where: D = fiber dispersion; L = fiber length (65km); C = velocity of light in free space (3.00E+8);  = opt center wavelength
RIN(f) = RIN through fiber (RIN65km – RIN0km); f = the measurement frequency (860MHz)
| REV 2012.12
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
1782 DWDM High Power CW Source Laser
FIBER OPTICS
DATASHEET | DECEMBER 2012
Outline Drawing
Pin Assignments
Pin
Description
1
Thermistor
2
Thermistor
3
Dc Laser Bias (-)
4
MPD Anode (-)
5
MPD Cathode (+)
6
Thermal Electric Cooler (+)
7
Thermal Electric Cooler (-)
8
Case Ground
9
Case Ground
10
NC
11
Laser Common (+), Case Ground
12
Laser Modulation (-)
13
Laser Common (+)
14
NC
| REV 2012.12
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
1782 DWDM High Power CW Source Laser
FIBER OPTICS
DATASHEET | DECEMBER 2012
ITU Grid Channel Numbering
Please contact EMCORE Sales for ITU Wavelength Channel availability.
Package Schematic
OPT OUT
14
1
NC
10K
ISO
13
2
GND
choke
(-)
3
12
RF INPUT
DC BIAS
0.1uF
4
11
(+)
GND
(+)
10
5
NC
(-)
9
6
(+)
TEC
7
CASE
GND
8
(-)
| REV 2012.12
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
1782 DWDM High Power CW Source Laser
FIBER OPTICS
DATASHEET | DECEMBER 2012
Laser Safety
This product complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June
24, 2007.
All Versions of this laser are Class 1M laser product, tested according to IEC 60825-1:2007/EN 60825-1:2007
Single-mode fiber pigtail with FC/APC connectors (standard).
Wavelength = 1.5 m.
Maximum power = 100 mW.
Because of size constraints, laser safety labeling (including an FDA class 1M label) is not affixed to the module, but
attached to the outside of the shipping carton.
Product is not shipped with power supply.
Caution: Use of controls, adjustments and procedures other than those specified herein may result in hazardous
laser radiation exposure.
DANGER
DANGER
INVISIBLE LASER RADIATION
IS EMITTED FROM THE END
OF FIBER OR CONNECTOR
INVISIBLE LASER
RADIATION
AVOID DIRECT
EXPOSURE TO BEAM
Wavelength: 1.5
Avoid direct exposure to beam
Do not view beam directly with
m
optical instruments
Max. Output: 100mW,
Class 1M Laser Product
INVISIBLE LASER RADIATION EMITTED FROM END OF FIBER OR CONNECTOR
Class 1M Laser Product
IEC-60825-1:20007 Max.Output:100mW
Wavelength: 1.5 m
| REV 2012.12
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
1782 DWDM High Power CW Source Laser
FIBER OPTICS
DATASHEET | DECEMBER 2012
Ordering Code Definitions
1782x – NM – xxx – yy – FC - PM
Family Name
1782: High Power CW Laser, 1250um cavity
Performance Options
1782A: RIN max = -155 dB/Hz (Standard)
1782B: RIN max = -157 dB/Hz (Enhanced)
Matching Options
NM: No Matching
Optical Power Options
xxx = 100: 100 mW
xxx = 080: 80 mW
xxx = 063: 63 mW
xxx = 050: 50 mW
xxx = 040: 40 mW
ITU Channel
yy = 01: Any desired custom wavelength
(Please consults Sales when order custom
wavelength)
yy = 02: Non-ITU, 1547 nm – 1560 nm
yy = 03: Non-ITU, 1557 nm – 1560 nm
yy = 04: Non-ITU, 1530 nm – 1560 nm
yy = 15: ITU Channel 15, 1565.50 nm
yy = 16: ITU Channel 16, 1564.68 nm
…
yy = 61: ITU Channel 61, 1528.77 nm
yy = 62: ITU Channel 62, 1527.99 nm
Optical Connector
FC: FC/APC
Fiber Options
PM: Panda PM, 400 m, Optical connector’s
key is aligned to the slow axis
Example
1782B-NM-100-18-FC-PM: CW Laser, Enchanced RIN, Non Matching, 100mW, Channel 18, FC/APC, PM fiber
| REV 2012.12
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.