SCHRACK General Purpose Relays Power PCB Relay RP II/1 I 1 pole 8 / 12 / 16 A, 1 C/O or 1 N/O contact I 4 kV / 8 mm coil-contact I Pinning 3.5 or 5 mm (8 / 12 A) and 5 mm (16 A) I PCB-sockets I RoHS compliant (Directive 2002 / 95 / EC) as per product date code 0404 Applications Power supplies, domestic appliances, heating control, installation F0146-B Approvals V ,Z Technical data of approved types on request Contact data Configuration Type of contact Rated current Rated voltage / max.breaking voltage AC Maximum breaking capacity AC Make current Contact material 1 C/O contact or 1 N/O contact single contact 8A 12 A 16 A 250 Vac / 440 Vac 2000 VA 3000 VA 4000 VA 16 A 20 A 25 A AgNi 0.15 AgCdO AgCdO Contact ratings Type Load RP410 12 A, 250 Vac, cosϕ=1, 1200/h, 40% duty cycle RP410 9.1 A, 220 Vac, cosϕ=1, 360/h, 15% duty cycle RP418 3.4 A ON, 0.42 A OFF, 220 Vac, cosϕ=0.6 RP411 8 A, 250 Vac, cosϕ=1, 50% duty cycle RP412 8 A, 250 Vac, cosϕ=1, 50% duty cycle RP330 18.2 A, 250 Vac, cosϕ=1, 600/h, 15% duty cycle RP330 96 A ON, 16 A OFF, 250 Vac, cosϕ=0.6, 450/h Operations 1.1x105 2x105 >1.1x106 105 105 1.1x105 > 3x104 Standard AC 1 AC 1 AC 1 AC 1 AC 1 VDE 0630 Coil data Nominal voltage Nominal coil power Operate category 5...110 Vdc 500 mW 2/b Coil versions, DC-coil Coil Nominal Pull-in Release Maximum Coil code voltage voltage voltage voltage resistance Vdc Vdc Vdc Vdc c 005 5 3.5 0.5 9.0 54+10% 006 6 4.2 0.6 10.8 68+10% 012 12 8.4 1.2 21.6 270+10% 024 24 16.8 2.4 43.2 1100+15% 048 48 33.6 4.8 86.4 4400+15% 060 60 42.0 6.0 108.0 6540+15% 110 110 77.0 11.0 198.0 23100+15% All figures are given for coil without preenergization, at ambient temperature +20°C Other coil voltages on request Coil current mA 92.6 88.2 44.4 21.8 10.9 9.2 4.8 1 Datasheet Rev. GK1 Issued 2007/11 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. SCHRACK General Purpose Relays Power PCB Relay RP II/1 (Continued) Dimensions Insulation Dielectric strength Dimensions in mm coil-contacts open contact circuit 4000 Vrms 1000 Vrms 8 / 8 mm Clearance / creepage Insulation to IEC 61810-1 Voltage rating Pollution degree Overvoltage category Insulation to VDE 0110b (2/79) Insulation category / reference voltage 250 V 3 III C / 250 Other data RoHS - Directive 2002 / 95 / EC Ambient temperature Mechanical life Max. switching rate at rated- / minimum load Operate- / release time Bounce time N/O contact/N/C contact Vibration resistance N/O contact/N/C contact Shock resistance (destruction) Category of protection (IEC 61810) Relay weight Packaging unit Accessories compliant as per product date code 0404 -40...+70 °C 30x106 operations 10 min-1 / 1200 min-1 typ. 8 / 2 ms typ. 2 / 4 ms >10 / 2 g, 30...300 Hz 100 g RT II - flux proof, RT III - wash tight 18 g 20 / 500 pcs. see accessories RT and RP Bottom view on solder pins Dimensions in mm PCB layout / terminal assignment 8 / 12 A, pinning 5 mm 8 / 12 A, pinning 3.5 mm S0163-CQ 1 C/O 16 A, pinning 5 mm S0163-CO S0163-CP 1 C/O S0163-BG 1 N/O S0273-AA 1 C/O S0163-BE S0163-BC 1 N/O S0163-BH 1 N/O S0163-BF S0163-BD 2 Datasheet Rev. GK1 Issued 2007/11 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. SCHRACK General Purpose Relays Power PCB Relay RP II/1 (Continued) 3 Datasheet Rev. GK1 Issued 2007/11 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change.