Catalog 1308242 Issued 3-03 (PDF Revised 4-07) P&B W51 series Rocker-Actuated Thermal Circuit Breaker/Power Switch With Optional Indicator Lamp Features Interrupt Capacity: 1,000 amps in accordance with UL standard 1077. Resettable Overload Capacity: Ten times rated current. Switch Endurance Cycling: Typically 6,000 operations at 100% of rating. Reset Time: 60 seconds. • Compact, trip-free, rocker-actuated design. • 5 to 20 amp ratings. • Provides circuit protection and power switching in a single unit. • Available with optional indicator lamp. • Snaps into the same cutout as many common power switches. • Various color, marking and termination options. Typical Resistance vs. Current Rating @ +25°C Agency Approvals W51 series is UL 1077 Recognized as Supplementary Protectors, File E69543, for Canada and the United States. Approved to VDE 0642/EN60934 (Circuit Breakers for Equipment) License Number 40017023 (for AC loads only). CCC mark compliant, certificate 2004010307123223. Current Rating in Amps Typical Resistance in Ohms Current Rating in Amps 5.0 6.0 7.0 8.0 0.050 0.042 0.036 0.031 10.0 15.0 20.0 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Electrical Data @ 25°C 0.025 0.017 0.0125 Mechanical/Environmental Data Calibration: Will continuously carry 100% of rating. May trip between 101% and 134%, but must trip at 135% of rating within one hour at +25°C. Dielectric Strength: 1,500VAC (60 seconds). Insulation Resistance: 100 megohms. Maximum Operating Voltages: 50VDC; 125 or 250VAC, 50/60 Hz. (model dependent). Operating Temperature Range: 0°C to +60°C. Termination: .250” (6.35mm) quick connects, solder terminals or right angle PC terminals. Mounting: Snaps into 1.122 x .531 (28.5 x 13.5) panel cutout. Approximate Weight: 0.37 oz. (10.5g). Time vs. Current Trip Curve @ +25°C Outline Dimensions 1000 Overload 100% 135% 200% 300% 400% 500% 600% 900 800 Load Current As A Percent Of Breaker Rating Typical Resistance in Ohms 700 600 Trip Times No Trip Trip in 1 hour 4.0 - 40.0 Sec. 1.2 - 12.0 Sec. 0.6 - 5.0 Sec. 0.4 - 2.8 Sec. 0.3 - 1.8 Sec. .598 (15.2) .394 (10.0) 1.260 (32.0) .118 (3.0) .079 (2.0) .858 (21.8) 500 .827 (21.0) 1.232 (31.3) 400 300 .315 (8.0) 200 100 0 .1 1 10 100 Time In Seconds 1000 10,000 10 20 25 30 40 50 60 Dimensions are shown for 112 reference purposes only. .394 (10.0) .504 (12.8) 1.098 (27.9) .031 (0.8) TYP. 1.311 (33.3) Recommended Panel Cutout Ambient Compensation Table Ambient Temperature in °C .354 (9.0) TYP. .25 (6.35) 135 Rating Correction Factor 5-6A Models 7-20A Models .80 .90 1.00 1.10 1.25 1.61 2.15 .80 .90 1.00 1.05 1.15 1.25 1.40 To use this chart: Divide the breaker rating by the correction factor to determine the compensated rating. Calculate the overloads in terms of the compensated rating to use the published trip curve. Do not use these devices outside their specified operating temperature ranges. Dimensions are in inches over (millimeters) unless otherwise specified. SUGGESTED PANEL CUTOUT .531 (13.5) 1.122 (28.5) Panel Thickness W51 series circuit breakers accommodate panel thicknesses from 0.030 in. to 0.118 in. (0.75 mm - 3.0 mm). Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 (PDF Revised 4-07) P&B Ordering Information B Typical Part No. W 51 -A 1 2 1 B 1 -5 1. Designator: W = Circuit breaker 2. Series Number: 51 = Switchable, Single Pole, Rocker-Actuated Thermal Model 3. Terminals: A = Quick connect .250” (6.35mm) straight C = Printed Circuit - right angle 4. Breaker Style & Base Color: 1 = Angular button design (see drawing below), black base color B = Countoured button design (see drawing below), black base color 5. Rocker Color: 1 = Amber (translucent) 2 = Red (translucent) 3 = Green (translucent) 4 = White (opaque - for use on non-illuminated models) 5 = Black (opaque - for use on non-illuminated models) 6 = Red (opaque - for use on non-illuminated models) 7 = Gray (opaque - for use on non-illuminated models) 8 = Black (opaque) with red (translucent) indicator (only available on model with contoured button) 9 = Black (opaque) with green (translucent) indicator (only available on model with contoured button) 6. Maximum Operating Voltage (AC): 1 = 125VAC 2 = 250VAC 7. Light: A = Non-illuminated B = Illuminated 8. Marking option: 0 = No marking 1 = RESET/OFF printed 9. Specify Amp Rating: 5 6 7 2 = RESET/OFF molded (only available on model with contoured button) 8 10 15 20 Our authorized distributors are more likely to stock the following items for immediate delivery. W51-A121B1-5 W51-A121B1-10 W51-A121B1-15 W51-A121B1-20 W51-A122B1-5 W51-A122B1-10 W51-A122B1-15 W51-A122B1-20 W51-A152A1-5 W51-A152A1-10 W51-A152A1-15 W51-A152A1-20 ORDERING NOTE: Some options illustrated below are not listed in the “Ordering Information” chart above. Options denoted by “Special” or “Special Order” in their descriptions are only offered on a special order basis. Other base and button colors and intermediate amp ratings are also available on a special order basis. All special order items are subject to extended leadtimes and significant minimum order quantities. Your Tyco Electronics sales engineer must consult with the factory before providing price and availability information regarding items with these options. Case Styles Marking Options For Angular Button Design (Printed) Standard RESET/OFF Printed on Bezel Angular Button Design Standard No Marking For Contoured Button Design (Molded) Standard RESET/OFF Molded into bezel Contoured Button Design Terminal Types .205 (5.2) .374 (9.5) .098 X .157 (2.5 x 4.0) .25 (6.35) .393 (10.0) Standard – .250 Quick Connect Terminal Dimensions are shown for reference purposes only. .157 X .098 (4.0 x 2.5) .298 (7.55) .25 (6.35) .393 (10.0) .250 (6.35) .504 (12.8) TERMINAL THICKNESS .032 FOR ALL TYPES (.81) Special Order Solder Terminal .601 (15.26) .66 (16.76) .156 (3.95) Standard – Right Angle PC Terminal Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 113