DS10BR150 www.ti.com SNLS252D – APRIL 2007 – REVISED APRIL 2013 DS10BR150 1.0 Gbps LVDS Buffer / Repeater Check for Samples: DS10BR150 FEATURES DESCRIPTION • The DS10BR150 is a single channel 1.0 Gbps LVDS buffer optimized for high-speed signal transmission over lossy FR-4 printed circuit board backplanes and balanced cables. Fully differential signal paths ensure exceptional signal integrity and noise immunity. 1 2 • • • DC - 1.0 Gbps Low Jitter, High Noise Immunity, Low Power Operation On-chip 100Ω Input and Output Termination Minimizes Insertion and Return Losses, Reduces Component Count and Minimizes Board Space 7 kV ESD on LVDS I/O Pins Protects Adjoining Components Small 3 mm x 3 mm 8-WSON Space Saving Package APPLICATIONS • • • Clock and Data Buffering OC-12 / STM-4 FireWire 800 Wide input common mode range allows the receiver to accept signals with LVDS, CML and LVPECL levels; the output levels are LVDS. A very small package footprint requires a minimal space on the board while the flow-through pinout allows easy board layout. The differential inputs and outputs are internally terminated with a 100Ω resistor to lower device input and output return losses, reduce component count and further minimize board space. Typical Application CML ASIC / FPGA LVDS LVPECL BR150 LVDS ASIC / FPGA 1 2 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2007–2013, Texas Instruments Incorporated DS10BR150 SNLS252D – APRIL 2007 – REVISED APRIL 2013 www.ti.com Block Diagram IN+ OUT+ IN- OUT- Pin Diagram NC 1 IN+ 2 IN- 3 NC 4 8 VCC DAP 7 OUT+ GND 6 OUT- 5 NC DS10BR150 See Package Number NGQ0008A PIN DESCRIPTIONS Pin Name Pin Name Pin Type Pin Description NC 1 NA "NO CONNECT" pin. IN+ 2 Input Non-inverting LVDS input pin. IN- 3 Input Inverting LVDS input pin. NC 4 NA "NO CONNECT" pin. NC 5 NA "NO CONNECT" pin. OUT- 6 Output Inverting LVDS output pin. OUT+ 7 Output Non-inverting LVDS Output pin. VCC 8 Power Power supply pin. GND DAP Power Ground pad (DAP - die attach pad) 2 Submit Documentation Feedback Copyright © 2007–2013, Texas Instruments Incorporated Product Folder Links: DS10BR150 DS10BR150 www.ti.com SNLS252D – APRIL 2007 – REVISED APRIL 2013 These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. Absolute Maximum Ratings (1) (2) Supply Voltage (VCC) −0.3V to +4V LVDS Input Voltage (IN+, IN−) −0.3V to +4V Differential Input Voltage |VID| 1V −0.3V to (VCC +0.3V) LVDS Output Voltage (OUT+, OUT−) LVDS Differential Output Voltage ((OUT+) - (OUT−)) 0V to 1V LVDS Output Short Circuit Current Duration 5 ms Junction Temperature +150°C −65°C to +150°C Storage Temperature Range Lead Temperature Range Soldering (4 sec.) +260°C Maximum Package Power Dissipation at 25°C NGQ Package 2.08W Derate NGQ Package 16.7 mW/°C above +25°C Package Thermal Resistance θJA +60.0°C/W θJC +12.3°C/W ESD Susceptibility HBM (3) ≥7 kV MM (4) ≥250V CDM (5) (1) (2) (3) (4) (5) ≥1250V Absolute Maximum Ratings indicate limits beyond which damage to the device may occur, including inoperability and degradation of device reliability and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or other conditions beyond those indicated in the Recommended Operating Conditions is not implied. The Recommended Operating Conditions indicate conditions at which the device is functional and the device should not be operated beyond such conditions. If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and specifications. Human Body Model, applicable std. JESD22-A114C Machine Model, applicable std. JESD22-A115-A Field Induced Charge Device Model, applicable std. JESD22-C101-C Recommended Operating Conditions Supply Voltage (VCC) Receiver Differential Input Voltage (VID) Operating Free Air Temperature (TA) Min Typ Max Units 3.0 3.3 3.6 V 1 V +85 °C 0 −40 +25 Submit Documentation Feedback Copyright © 2007–2013, Texas Instruments Incorporated Product Folder Links: DS10BR150 3 DS10BR150 SNLS252D – APRIL 2007 – REVISED APRIL 2013 www.ti.com DC Electrical Characteristics Over recommended operating supply and temperature ranges unless otherwise specified. Symbol Parameter Conditions (1) (2) (3) Min Typ Max Units 250 350 450 mV 35 mV 1.375 V 35 mV LVDS OUTPUT DC SPECIFICATIONS (OUT+, OUT-) VOD Differential Output Voltage ΔVOD Change in Magnitude of VOD for Complimentary Output States VOS Offset Voltage ΔVOS Change in Magnitude of VOS for Complimentary Output States IOS Output Short Circuit Current RL = 100Ω -35 1.05 (4) RL = 100Ω 1.2 -35 OUT to GND -30 -50 mA OUT to VCC 7.5 50 mA COUT Output Capacitance Any LVDS Output Pin to GND 1.2 pF ROUT Output Termination Resistor Between OUT+ and OUT- Pins 100 Ω LVDS INPUT DC SPECIFICATIONS (IN+, IN-) VID Input Differential Voltage VTH Differential Input High Threshold 0 VTL Differential Input Low Threshold VCMR Common Mode Voltage Range VID = 100 mV IIN Input Current VIN = 3.6V or 0V VCC = 3.6V or 0V ±1 CIN Input Capacitance 1.7 pF RIN Input Termination Resistor Between IN+ and IN- Pins 100 Ω VCM = +0.05V or VCC-0.05V 0 −100 1 V +100 mV 0 0.05 mV VCC 0.05 V ±10 μA SUPPLY CURRENT ICCD (1) (2) (3) (4) 4 Total Supply Current 16 21 mA The Electrical Characteristics tables list ensured specifications under the listed Recommended Operating Conditions except as otherwise modified or specified by the Electrical Characteristics Conditions and/or Notes. Typical specifications are estimations only and are not ensured. Current into device pins is defined as positive. Current out of device pins is defined as negative. All voltages are referenced to ground except VOD and ΔVOD. Typical values represent most likely parametric norms for VCC = +3.3V and TA = +25°C, and at the Recommended Operation Conditions at the time of product characterization and are not ensured. Output short circuit current (IOS) is specified as magnitude only, minus sign indicates direction only. Submit Documentation Feedback Copyright © 2007–2013, Texas Instruments Incorporated Product Folder Links: DS10BR150 DS10BR150 www.ti.com SNLS252D – APRIL 2007 – REVISED APRIL 2013 AC Electrical Characteristics (1) Over recommended operating supply and temperature ranges unless otherwise specified. Symbol Parameter Conditions (2) (3) Min Typ Max Units 380 600 ps 410 600 ps 30 150 ps LVDS OUTPUT AC SPECIFICATIONS (OUT+, OUT-) tPHLD2 Differential Propagation Delay High to Low tPLHD2 Differential Propagation Delay Low to High tSKD1 Pulse Skew |tPLHD − tPHLD| tSKD2 Part to Part Skew tLHT Rise Time tHLT Fall Time RL = 100Ω (4) (5) RL = 100Ω 45 160 ps 165 400 ps 155 400 ps JITTER PERFORMANCE Figure 5 tDJ tRJ tTJ (1) (2) (3) (4) (5) (6) (7) (8) Deterministic Jitter (Peak-to-Peak Value ) (See (6) ) Random Jitter (RMS Value) (7) Total Jitter (Peak to Peak Value) (8) VID = 350 mV VCM = 1.2V K28.5 (NRZ) 622 Mbps 12 39 ps 1.06 Gbps 15 42 ps VID = 350 mV VCM = 1.2V Clock (NRZ) 311 MHz 0.6 1.3 ps 503 MHz 0.6 1.1 ps VID = 350 mV VCM = 1.2V PRBS-23 (NRZ) 622 Mbps 0.02 0.04 UIP-P 1.06 Gbps 0.02 0.05 UIP-P Specification is ensured by characterization and is not tested in production. The Electrical Characteristics tables list ensured specifications under the listed Recommended Operating Conditions except as otherwise modified or specified by the Electrical Characteristics Conditions and/or Notes. Typical specifications are estimations only and are not ensured. Typical values represent most likely parametric norms for VCC = +3.3V and TA = +25°C, and at the Recommended Operation Conditions at the time of product characterization and are not ensured. tSKD1, |tPLHD − tPHLD|, is the magnitude difference in differential propagation delay time between the positive going edge and the negative going edge of the same channel. tSKD2, Part to Part Skew, is defined as the difference between the minimum and maximum specified differential propagation delays. This specification applies to devices at the same VCC and within 5°C of each other within the operating temperature range. Tested with a combination of the 1100000101 (K28.5+ character) and 0011111010 (K28.5- character) patterns. Input stimulus jitter is subtracted algebraically. Measured on a clock edge with a histogram and an accumulation of 1500 histogram hits. Input stimulus jitter is subtracted geometrically. Measured on an eye diagram with a histogram and an accumulation of 3500 histogram hits. Input stimulus jitter is subtracted. Submit Documentation Feedback Copyright © 2007–2013, Texas Instruments Incorporated Product Folder Links: DS10BR150 5 DS10BR150 SNLS252D – APRIL 2007 – REVISED APRIL 2013 www.ti.com DC Test Circuits DS10BR150 VOH OUT+ IN+ Power Supply R D RL Power Supply IN- OUTVOL Figure 1. Differential Driver DC Test Circuit AC Test Circuits and Timing Diagrams DS10BR150 OUT+ IN+ R Signal Generator D RL IN- OUT- Figure 2. Differential Driver AC Test Circuit Figure 3. Propagation Delay Timing Diagram Figure 4. LVDS Output Transition Times 6 Submit Documentation Feedback Copyright © 2007–2013, Texas Instruments Incorporated Product Folder Links: DS10BR150 DS10BR150 www.ti.com SNLS252D – APRIL 2007 – REVISED APRIL 2013 CHARACTERIZATION BOARD 50: Microstrip 50: Microstrip DS10BR150 L=4" L=4" PATTERN GENERATOR OSCILLOSCOPE L=4" L=4" 50: Microstrip 50: Microstrip Figure 5. Jitter Measurements Test Circuit DEVICE OPERATION INPUT INTERFACING The DS10BR150 accepts differential signals and allows simple AC or DC coupling. With a wide common mode range, the DS10BR150 can be DC-coupled with all common differential drivers (i.e. LVPECL, LVDS, CML). The following three figures illustrate typical DC-coupled interface to common differential drivers. Note that the DS10BR150 inputs are internally terminated with a 100Ω resistor. 100: Differential T-Line IN+ OUT+ LVDS DS10BR150 OUT- IN- Figure 6. Typical LVDS Driver DC-Coupled Interface to DS10BR150 Input CML3.3V or CML2.5V VCC 50: 100: Differential T-Line 50: IN+ OUT+ DS10BR150 OUT- IN- Figure 7. Typical CML Driver DC-Coupled Interface to DS10BR150 Input Submit Documentation Feedback Copyright © 2007–2013, Texas Instruments Incorporated Product Folder Links: DS10BR150 7 DS10BR150 SNLS252D – APRIL 2007 – REVISED APRIL 2013 LVPECL Driver OUT+ www.ti.com 100: Differential T-Line LVDS Receiver IN+ 100: OUT150-250: IN150-250: Figure 8. Typical LVPECL Driver DC-Coupled Interface to DS10BR150 Input OUTPUT INTERFACING The DS10BR150 outputs signals are compliant to the LVDS standard. It can be DC-coupled to most common differential receivers. The following figure illustrates typical DC-coupled interface to common differential receivers and assumes that the receivers have high impedance inputs. While most differential receivers have a common mode input range that can accomodate LVDS compliant signals, it is recommended to check respective receiver's data sheet prior to implementing the suggested interface implementation. 100: Differential T-Line OUT+ DS10BR150 IN+ CML or LVPECL or LVDS 100: IN- OUT- Figure 9. Typical DS10BR150 Output DC-Coupled Interface to an LVDS, CML or LVPECL Receiver 8 Submit Documentation Feedback Copyright © 2007–2013, Texas Instruments Incorporated Product Folder Links: DS10BR150 DS10BR150 www.ti.com SNLS252D – APRIL 2007 – REVISED APRIL 2013 Typical Performance Figure 10. A 622 Mbps NRZ PRBS-7 Output Eye Diagram V:100 mV / DIV, H:200 ps / DIV Figure 11. A 1062.5 Mbps NRZ PRBS-7 Output Eye Diagram V:100 mV / DIV, H:150 ps / DIV 90 90 75 VCC = 3.3V TA = 25°C NRZ PRBS-7 622 Mbps TOTAL RESIDUAL JITTER (ps) TOTAL RESIDUAL JITTER (ps) VCC = 3.3V 60 VICM = 1.0V 45 30 VICM = 2.4V 15 0 0.25 0.40 0.55 0.70 0.85 1.00 75 TA = 25°C NRZ PRBS-7 1062.5 Mbps 60 45 VICM = 1.0V 30 VICM = 2.4V 15 0 0.25 0.40 0.55 0.70 0.85 1.00 DIFFERENTIAL INPUT VOLTAGE (V) DIFFERENTIAL INPUT VOLTAGE (V) Figure 12. Total Jitter as a Function of Input Amplitude Figure 13. Total Jitter as a Function of Input Amplitude Submit Documentation Feedback Copyright © 2007–2013, Texas Instruments Incorporated Product Folder Links: DS10BR150 9 DS10BR150 SNLS252D – APRIL 2007 – REVISED APRIL 2013 www.ti.com REVISION HISTORY Changes from Revision C (April 2013) to Revision D • 10 Page Changed layout of National Data Sheet to TI format ............................................................................................................ 9 Submit Documentation Feedback Copyright © 2007–2013, Texas Instruments Incorporated Product Folder Links: DS10BR150 PACKAGE OPTION ADDENDUM www.ti.com 12-Apr-2013 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish (2) MSL Peak Temp Op Temp (°C) Top-Side Markings (3) (4) DS10BR150TSD/NOPB ACTIVE WSON NGQ 8 1000 Green (RoHS & no Sb/Br) CU SN Level-3-260C-168 HR -40 to 85 1R150 DS10BR150TSDX/NOPB ACTIVE WSON NGQ 8 4500 Green (RoHS & no Sb/Br) CU SN Level-3-260C-168 HR -40 to 85 1R150 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) Multiple Top-Side Markings will be inside parentheses. Only one Top-Side Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Top-Side Marking for that device. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 Samples PACKAGE MATERIALS INFORMATION www.ti.com 24-Apr-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant DS10BR150TSD/NOPB WSON NGQ 8 1000 178.0 12.4 3.3 3.3 1.0 8.0 12.0 Q1 DS10BR150TSDX/NOPB WSON NGQ 8 4500 330.0 12.4 3.3 3.3 1.0 8.0 12.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 24-Apr-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) DS10BR150TSD/NOPB WSON NGQ 8 1000 213.0 191.0 55.0 DS10BR150TSDX/NOPB WSON NGQ 8 4500 367.0 367.0 35.0 Pack Materials-Page 2 MECHANICAL DATA NGQ0008A SDA08A (Rev A) www.ti.com IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2013, Texas Instruments Incorporated