ONSEMI CM6317

CM6317
EMI Filter with ESD
Protection for Data Line
Applications
Product Description
http://onsemi.com
The CM6317 is an 18−bump EMI filter with ESD protection device
for data line application in a 0.4 mm pitch, 5 x 4 CSP form factor. It is
fully compliant with IEC 61000−4−2. The CM6317 is RoHS II
compliant.
Features
• 18−Bump, 1.96 mm X 1.56 mm Footprint Chip Scale Package
• These Devices are Pb−Free and are RoHS Compliant
WLCSP18
CASE 567CG
ELECTRICAL SCHEMATIC
R
Level 4
Level 4
GND
1 of 7 Filter Channels
MARKING DIAGRAM
+
6317
YYWW
XXXX
6317
YYWW
XXXX
= CM6317
= Date Code
= Last four digits of lot#
ORDERING INFORMATION
Device
Package
Shipping†
CM6317
CSP−18
(Pb−Free)
5000/Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2011
April, 2011 − Rev. 3
1
Publication Order Number:
CM6317/D
CM6317
PACKAGE / PINOUT DIAGRAMS
Top View
(Bumps Down View)
Orientation
Marking
Bottom View
(Bumps Up View)
+
A1 Indicator
Table 1. PIN DESCRIPTIONS
A5 = Line 1
A4 = Line 2
A3 = GND
B5 = Line 3
A2 = Line 1
A1 = Line 2
B3 = GND
B1 = Line 3
C5 = Line 4
C4 = Line 5
C3 = GND
C2 = Line 4
C1 = Line 5
D5 = Line 6
D4 = Line 7
D3 = GND
D2 = Line 6
D1 = Line 7
ELECTRICAL SPECIFICATIONS AND CONDITIONS
Table 2. PARAMETERS AND OPERATING CONDITIONS
Parameter
Rating
Units
Storage Temperature Range
–55 to +150
°C
Operating Temperature Range
–40 to +85
°C
60
mW
Power Dissipation at 70°C per Channel
Table 3. ELECTRICAL OPERATING CHARACTERISTICS (Note 1)
Symbol
Parameter
Conditions
R
Resistance
C
Capacitance per Line
At 1 MHz, VIN = 0 V
VBR
Breakdown Voltage
IR = ±1 mA
ILEAK
Leakage Current per Channel
VIN = 3.0 V
VESD
ESD Protection Peak Discharge Voltage
a) Contact Discharge per IEC 61000−4−2
standard
b) Air Discharge per IEC 61000−4−2 standard
(Note 2)
Min
Typ
Max
56
70
84
W
30
pF
±7.8
±10
V
10
100
nA
±6
±14
±15
1. All parameters specified at TA = 25°C unless otherwise noted.
2. Standard IEC 61000−4−2 with CDischarge = 150 pF, RDischarge = 330 W.
http://onsemi.com
2
Units
kV
CM6317
RF CHARACTERISTICS
TA = 255C, DC Bias = 0 V, 50 W Environment
Figure 1. Frequency Response − Filters 1 to 7
http://onsemi.com
3
CM6317
PACKAGE DIMENSIONS
WLCSP18, 1.96x1.56
CASE 567CG−01
ISSUE O
È
È
PIN A1
REFERENCE
2X
D
A
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. COPLANARITY APPLIES TO SPHERICAL
CROWNS OF SOLDER BALLS.
B
DIM
A
A1
A2
b
D
E
e
E
0.05 C
2X
0.05 C
TOP VIEW
MILLIMETERS
MIN
MAX
0.63
0.57
0.17
0.24
0.41 REF
0.24
0.29
1.96 BSC
1.56 BSC
0.40 BSC
A2
0.05 C
RECOMMENDED
SOLDERING FOOTPRINT*
A
0.05 C
NOTE 3
18
A1
b
0.05 C A B
0.03 C
SIDE VIEW
C
SEATING
PLANE
PACKAGE
OUTLINE
A1
e
D
0.40
PITCH
e
C
18X
0.40
PITCH
B
A
1
2
3
4
0.25
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
5
BOTTOM VIEW
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
http://onsemi.com
4
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
CM6317/D