RoHS Ready UMCC – Ultraminiature Coax Connector & Cable Assembly Series DESCRIPTION Tyco Electronics introduces the Ultraminiature Coax Connector and Cable Assembly series products. The UMCC series is an ultra low profile coax interconnect solution that meets the ever growing demand for miniaturization in next generation wireless applications. UMCC cable assemblies and connectors are available as double-ended jumpers and inter-series assemblies, and PCB jack receptacles for board mount applications. Tyco Electronics specializes in solving tough problems with cable assemblies designed and manufactured to meet the most demanding requirements. Tyco Electronics can engineer custom UMCC solutions to meet special requirements. By making Tyco Electronics your partner in cable assembly design, you reduce risk and gain assurance that you will receive your assembly on time, to specification and within budget. APPLICATIONS For More Information • Wireless LAN, Mini PCI • Mobile Antenna/GPS/Radio Systems • PDA / PCS / Cellular Handset Technical Support Internet: • Wireless Communications systems http://tycoelectronics.com/products/rfcoax Email: [email protected] applications • (LAN, GSM, PCS, WCDMA, UMTS) Remote measuring equipment KEY FEATURES • Ultra low profile (2.0mm or 2.5mm • • • • • • • • maximum mated height) Easy snap on/off mating Small footprint on PCB (3mm x 3mm) Excellent performance to 6 GHz Surface mount and reflow solderable 360 degree mated rotation Available on 0.81mm, 1.13mm, and 1.37mm dia single shield, and 1.32mm dia double shield cable Style A receptacles compatible with Hirose U.FL/U.FL(v) Series connectors* Style B receptacles compatible with Murata GSC Series connectors US Product Manager Cable Assemblies — David Stonfer Phone: 717-986-5950 Email: [email protected] US Product Manager Connectors — Claude de Lorraine Phone: 717-986-5793 Email: [email protected] Europe Product Manager — Rob Smeets Phone: +31-736246327 Email: [email protected] USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-112103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: +44 (0) 800-267-666 UMCC – Ultraminiature Coax Connector & Cable Assembly Series Page 2 SPECIFICATIONS REQUIREMENTS DETAIL ELECTRICAL Characteristic Impedance: Frequency Range: VSWR (mated pair): Insertion Loss (connectors only): Rated voltage: Dielectric Withstanding Voltage: Insulation Resistance: Contact Resistance (connectors only): 50 Ohms DC to 6 GHz 1.30 max DC to 3 GHz 1.40 max 3 to 6 GHz (cable dependent) 0.24 dB max DC to 6 GHz 60 VAC (rms) – standard recept (Styles A, B) 200 VAC, 50 Hz for 1 min (at sea level) 500 Megohms min 20 milliohms max (Center) 10 milliohms max (Outer, Plug) 10 milliohms max (Outer, Receptacle) MECHANICAL / ENVIRONMENTAL Durability: Disengagement Force: Center Contact Retention force: Tape/Reel Packaging (receptacle): Operating Temperature: 30 cycles – standard recept (Styles A, B) 2N min perpendicular 4N min orthogonal 0.15N min 12mm carrier per EIA-481 - 40°C to + 90°C MATERIAL Part Description Shell Male Center Contact Female Center Contact Insulator (Plug) Insulator (Receptacle) Material Phosphor Bronze Brass or Phos Bronze Brass or Phos Bronze PBT (15% G.F.) LCP Finish Gold or Silver Plating Gold Plating Gold Plating Black, UL94V-0 Beige or Black, UL94V-0 UMCC – Ultraminiature Coax Connector & Cable Assembly Series Page 3 SPECIFICATIONS CABLE INFORMATION MATERIALS: Center Conductor Size Dielectric Size Shield Coverage Jacket Size MECHANICAL: Minimum Bend Radius 0.81 mm Diameter 1.13 mm Diameter 1.32mm Diameter 1.37mm Diameter Silver Plated Copper Stranded 7/0.05 mm FEP or PFA 0.40 mm OD Silver Plated Copper Braid > 90% FEP or PFA 0.81 mm OD Silver Plated Copper Stranded 7/0.08 mm FEP 0.62 mm OD Silver Plated Copper Braid > 90% FEP 1.13 mm OD Silver Plated Copper Stranded 7/0.08 mm FEP 0.66 mm OD Double SPL Braid > 90% > 90% 1.32 mm OD Silver Plated Copper Stranded 7/0.10 mm FEP 0.83 mm OD Silver Plated Copper Braid > 90% > 90% 1.37 mm OD 5 mm Single Bend 30 mm Continuous Flexing 5 mm Single Bend 30 mm Continuous Flexing 5 mm Single Bend 30 mm Continuous Flexing 5 mm Single Bend 30 mm Continuous Flexing 50±2 70% 0.750 60 VAC See Chart 50±2 70% 0.560 60 VAC See Chart 50±2 70% 0.354 60 VAC See Chart ELECTRICAL: Impedance (Ohms) Velocity of Propagation CC Resistance (Ohms/M) Voltage Rating Attenuation 50±2 70% 1.450 60 VAC See Chart UMCC CABLE ATTENUATION 1 1.5 2 2.5 3 Frequency (GHz) 3.5 4 4.5 5 5.5 6 0 -1 -2 1.37mm OD 1.32mm OD -3 -4 -5 -6 1.13mm OD -7 -8 -9 -10 Dimensions are millimeters over inches unless otherwise specified. 0.81mm OD UMCC – Ultraminiature Coax Connector & Cable Assembly Series Page 4 Standard Double Ended Cable Assemblies H (MAX) Receptacle Printed Circuit Board Part Number Cable Dia Length L 2015697-3 2015697-1 2015697-2 2015698-4 2015698-2 2015698-3 2015699-3 2015699-1 2015699-2 2015487-6 2015487-4 2015487-5 2015700-3 2015700-1 2015700-2 2015357-3 2015357-4 2015357-2 0.81mm 0.81mm 0.81mm 0.81mm 0.81mm 0.81mm 0.81mm 0.81mm 0.81mm 1.13mm 1.13mm 1.13mm 1.32mm 1.32mm 1.32mm 1.37mm 1.37mm 1.37mm 50mm 100mm 200mm 50mm 100mm 200mm 50mm 100mm 200mm 50mm 100mm 200mm 50mm 100mm 200mm 50mm 100mm 200mm UMCC Cable Connector Type I I I II II II III III III III III III III III III III III III Mates with PCB Receptalce Style B Style B Style B Style A Style A Style A Style A Style A Style A Style A Style A Style A Style A Style A Style A Style A Style A Style A Mated Height (H) 2.0mm 2.0mm 2.0mm 2.0mm 2.0mm 2.0mm 2.5mm 2.5mm 2.5mm 2.5mm 2.5mm 2.5mm 2.5mm 2.5mm 2.5mm 2.5mm 2.5mm 2.5mm L 4mm REF Total Length (mm) 25< L <200 200< L <700 700< L <900 900< L Standard Tolerance ) (mm) +/- 2 +/- 3 +/-4 +/-5 Note: Shortest length L is 25mm Custom cable assembly lengths available. Contact Tyco Electronics with specific requirements. UMCC – Ultraminiature Coax Connector & Cable Assembly Series Page 5 Interseries Cable Assemblies Part Number 2032438-1 2032439-1 2032440-1 2032441-1 2032442-1 2032443-1 2032444-1 Description Cable Dia Length UMCC Plug to FME Plug UMCC Plug to SMA Plug UMCC Plug to SMA Blkhd Jack UMCC Plug to MCX R/A Plug UMCC Plug to MCX R/A Plug UMCC Plug to MMCX R/A Plug UMCC Plug to MMCX R/A Plug 1.37mm 1.37mm 1.37mm 0.81mm 1.37mm 0.81mm 1.37mm 200mm 200mm 200mm 200mm 200mm 200mm 200mm 200mm 20mm REF 200mm 20mm REF 200mm 20mm REF 200mm 20mm REF 200mm 20mm REF Custom cable assembly lengths and connector confrgurations are available. Contact Tyco Electronics with specific requirements. UMCC Conn Type III III III II III II III Mated Height (H) 2.5mm 2.5mm 2.5mm 2.0mm 2.5mm 2.0mm 2.5mm UMCC – Ultraminiature Coax Connector & Cable Assembly Series Page 6 Adapters Part Number 1775229-1 1775230-1 1775228-1 1775227-1 10.0 [0.393] Description UMCC Plug to SMA Jack UMCC Plug to SMA Jack UMCC Jack Receptacle to SMA Plug UMCC Jack Receptacle to SMA Plug 14.0 [0.551] 5.6 [0.22] 10.0 [0.393] 2.6 6.25 [0.102] [0.246] 5.3 [0.208] UMCC Conn Type I II/III I II/III 14.0 [0.551] 2.5 6.25 [0.098] [0.246] 5.3 [0.208] Part Number 1775229 10.60 [0.417] 2.00 [0.078] 5.6 [0.22] Part Number 1775230 8 HEX 10.60 [0.417] 1.10 [0.043] 1.90 [0.074] Part Number 1775228 Dimensions are millimeters [inches] unless otherwise specified 1.10 [0.043] Part Number 1775227 8 HEX UMCC – Ultraminiature Coax Connector & Cable Assembly Series Page 7 PCB Receptacles ––Style A H (MAX) Receptacle Printed Circuit Board Part Number Description Style 1566230-1 1566230-2 UMCC PCB Receptacle UMCC PCB Receptacle A A Mates with UMCC Cable Conn Type II/III II/III Mated Height (H) 2.0mm/2.5mm 2.0mm/2.5mm Packaging Tape (2500 pieces/reel) Bulk (500 pieces/bag) UMCC PCB Receptacle - Style A NO CONDUCTIVE TRACES IN THIS AREA Dimensions are millimeters [inches] unless otherwise specified UMCC – Ultraminiature Coax Connector & Cable Assembly Series Page 8 PCB Receptacles — Style B H (MAX) Receptacle Printed Circuit Board Part Number Description Style 1775146-1 1775146-2 UMCC PCB Receptacle UMCC PCB Receptacle B B Mates with UMCC Cable Conn Type I I Mated Height (H) 2.0mm 2.0mm Packaging Tape (2500 pieces/reel) Bulk (500 pieces/bag) UMCC PCB Receptacle - Style B NO CONDUCTIVE TRACES IN THIS AREA Dimensions are millimeters [inches] unless otherwise specified UMCC – Ultraminiature Coax Connector & Cable Assembly Series Page 9 Application Notes Soldering Profile - SMT Receptacle Recommended Temperature Profile (Reference) 1) The preferred technique for mounting the SMT Receptacle package is to reflow solder the device onto a PCB (Printed Circuit Board). 2) The maximum temperature for the lead of PCB surface does not exceed 240 . 3) The right reflow soldering profile is for reference and will modify under individual different conditions. Hand Soldering (Reference only) 1) Soldering iron: The maximum temperature 240 . 2) Soldering period: within 5 seconds. Tape and Reel Packaging Specifications 1.4 Standard Receptacles 2.0+0.1 4.0+0.1 1.50 CENTERCONTACT 1.75 0.30 330 5.5 13.0 12.0 1.60 8.0 DIMENSIONS OF TAPING DIMENSIONS REEL (2500 PIECES/REEL) UMCC – Ultraminiature Coax Connector & Cable Assembly Series Page 10 Application Notes Extraction Tool Part Number: 1775231-1 Dimensions are millimeters [inches] unless otherwise specified Mating/Unmaking — Cable Plugs 1) To mate the connectors, insert the cable plug into the SMT receptacle, making sure the cable plug is as vertical as possible and the mating axis of both connectors are aligned. Do not insert on an extreme angle. 2) To unmate the connectors, insert the end portion of the extraction tool under the SMT receptacle connector flanges and pull off vertically in the direction of the mating axis. PULLING TOOL STEP 1 STEP 2 RECEPTACLE Permissible Load Do not apply excessive load to the cable after the connectors are mated. Please refer to the permissible loads indicated in the figure to the right. 2N MAX. RF COAX. CABLE 4N MAX. 2N MAX. PRINT CIRCUIT BOARD Disclaimer While Tyco Electronics Corporation and its affiliates referenced herein (“Tyco Electronics”) have made every reasonable effort to ensure the accuracy of the information in this catalog, Tyco Electronics does not guarantee that it is error free, nor does Tyco Electronics make any other representation, warranty or guarantee that the information is accurate, correct reliable or current. Tyco Electronics reserves the right to make any adjustments to the information contained herein at any time without notice. Tyco Electronics expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. Tyco Electronics' only obligations are those in the Tyco Electronics Standard Terms and Conditions of Sale, and in no case will Tyco Electronics be responsible for any incidental, indirect, or consequential damages arising from the sale, resale, or misuse of its products. Users should independently evaluate the suitability of, and test each product for, their application © Copyright 2007 by Tyco Electronics Corporation. All Rights Reserved. TE LOGO and TYCO ELECTRONICS are trademarks. MURATA is a trademark of Murata Manufacturing Company, Ltd. Murata Manufacturing Company, Ltd. is not affiliated with the UMCC product. HIROSE is a trademark of Hirose Electric U.S.A. Hirose Electric U.S.A. is not affiliated with the UMCC product. Other products, logos, and Company names mentioned herein maybe trademarks of their respective owners. 1-1773441-5_11/07_CCCE_PDF