Optoway SPS-6110WG 1 *********************************************************************************************************************************************************************** SPS-6110WG / SPS-6110BWG / SPS-6110AWG (RoHS Compliant) 16G FC / 1310 nm / 10 km Digital Diagnostic SFP+ LC SINGLE-MODE TRANSCEIVER *********************************************************************************************************************************************************************** FEATURES DESCRIPTION l l l l l l l l l l l l l l The SPS-6110WG series single mode transceiver is small form factor pluggable module for bi-directional serial optical data communications such as 16x/8x/4x Fibre Channel. It is with the SFP+ 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. This module is designed for single mode fiber and operates at a nominal wavelength of 1310 nm. The transmitter section uses a 1310 nm multiple quantum well DFB laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and post amplifier IC. Up to 14.025 Gbps Bi-directional Data Links Complaint with SFP+ MSA Compliance with Fibre Channel 1600-SM-LC-L Compliant with 8G and 4G Fibre Channel SFF-8472 Digital Diagnostic Function 1310 nm DFB LD Transmitter AC/AC Coupling according to MSA 2 to 10,000 m at 14.025 Gbps Single +3.3 V Power Supply RoHS 6/6 Compliant 0 to 70oC Operating: SPS-6110WG -5 to 85oC Operating: SPS-6110BWG -40 to 85oC Operating: SPS-6110AWG Class 1 Laser International Safety Standard IEC-60825 Compliant APPLICATIONS l Multi-rate 16x / 8x / 4x Fibre Channel l 10G FCoE l 10G Ethernet LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. ORDER INFORMATION P/No. SPS-6110WG SPS-6110BWG SPS-6110AWG Bit Rate (Gb/s) FC Distance (km) Wavelength (nm) Package Temp. (oC) RoHS Compliant 14.025 14.025 14.025 16G / 8G / 4G 10 10 10 1310 DFB 1310 DFB 1310 DFB SFP+ with DMI SFP+ with DMI SFP+ with DMI 0 to 70 -5 to 85 -40 to 85 Yes Yes Yes 16G / 8G / 4G 16G / 8G / 4G Absolute Maximum Ratings Parameter Storage Temperature Operating Case Temperature Power Supply Voltage Symbol Tstg Topr Vcc Min -40 0 -5 -40 -0.5 Max 85 70 85 85 3.6 Units o C o C Notes SPS-6110WG SPS-6110BWG SPS-6110AWG V Recommended Operating Conditions Parameter Power Supply Voltage Operating Case Temperature Power Supply Current Data Rate Symbol Vcc Topr Min 3.13 0 -5 -40 ICC (TX+RX) 4.25 Typ 3.3 220 14.025 Max 3.47 70 85 85 300 Units / Notes V o C / SPS-6110WG o C / SPS-6110BWG o C / SPS-6110AWG mA Gb/s *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: [email protected] Fax: 886-3-5979737 http: // www.optoway.com.tw 2011/7/1 V1.0 Optoway SPS-6110WG 2 *********************************************************************************************************************************************************************** Transmitter Optical Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V) Parameter Optical Modulation Amplitude Average Launch Power Extinction Ratio Output Center Wavelength Output Spectrum Width Side Mode Suppression Ratio Transmitter and Dispersion Penalty Relative Intensity Noise Average Launch Power of OFF Transmitter Symbol Po, OMA Po, Avg ER λc σλ SMSR TDP Min -2 -4 3.5 1295 Typ Max +2 +2 Units dBm dBm 1325 1 4.4 nm nm dB dB -130 -30 dB/Hz dBm 30 RIN Notes 1 -20 dB width 1. Output power is power coupled into a 9/125 µm single-mode fiber. Receiver Optical Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V) Parameter Unstressed Sensitivity at 14.025 Gb/s Stress Sensitivity at 14.025 Gb/s Receiver Overload LOS -- Deasserted LOS -- Asserted Wavelength of Operation Optical Return Loss Symbol Sens Sens PMAX LOSD LOSA λc ORL Min 2 ---22 1260 Typ --------- Max -12 -10.9 -10.2 -12 --1565 -12 Units dBm dBm dBm dBm dBm dBm nm dB Notes 2, OMA 3, Average Power 2, OMA Transition: low to high Transition: high to low 2. Measured with worst ER; BER < 10-12 and PRBS 231-1. 3. Represents sensitivity based on OMA spec, as corrected to incoming Extinction Ratio of 3.5 dB. For example, an OMA of 0.063 mW (-12 dBm) is approximately equal to an average power of -10.9 dBm, average with an Extinction ratio of 3.5 dB. Electrical Characteristics Parameter Symbol Min High-Speed Signal (CML) Interface Specification Input Data Rate 4.25 TX Clock Tolerance Differential Input Impedance Rin Differential Data Input Amplitude 150 Output Data Rate 4.25 RX Clock Tolerance Differential Output Impedance Rout Differential Data Output 350 Amplitude Low-Speed Signal (LVTTL) Interface Specification Input High Voltage 2.0 Input Low Voltage GND Output High Voltage 2.4 Output Low Voltage GND 4. Clock tolerance for 14.025 Gb/s, 8.5Gb/s and 4.25 Gb/s. Typ Max 14.025 Notes Gb/s ppm Ω mVpp Gb/s ppm Ω Internally AC coupled 700 mVpp Internally AC coupled Vcc+0.3 0.8 Vcc 0.5 V V V V ±100 100 1200 14.025 ±100 100 600 Units 4 4 ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: [email protected] Fax: 886-3-5979737 http: // www.optoway.com.tw 2011/7/1 V1.0 Optoway SPS-6110WG 3 *********************************************************************************************************************************************************************** CONNECTION DIAGRAM PIN Signal Name 1 2 VEET TX_Fault 3 TX_Disable 4 SDA 5 SDL 6 7 MOD-ABS RS0 8 9 RX_LOS RS1 10 VEER Description PIN Signal Name Transmitter Signal Ground Transmitter Fault Indication. Logic “1” Output = Laser Fault. Logic “0” Output = Normal Operation Logic “1” Input (or no connection) = Laser off, Logic “0” = Laser on. Modulation Definition 2 – Two wires serial ID Interface Modulation Definition 1 – Two wires serial ID Interface Modulation Definition 0 – Ground in Module RX Rate Select: This pin has an internal 30k pulldown to ground. A signal on this pin will not affect module performance. Loss of Signal Out (OC). TX Rate Select. This pin has an internal 30k pulldown to ground. A signal on this pin will not affect module performance. Receiver Signal Ground Description 11 12 VEER RD- Receiver Signal Ground Inverse Receiver Data Out 13 RD+ Receiver Data Out 14 VEER Receiver Signal Ground 15 VCCR Receiver Power – 3.3V±5% 16 17 VCCT VEET Transmitter Power – 3.3V±5% Transmitter Signal Ground 18 19 TD+ TD- Transmitter Data In Inverse Transmitter Data In 20 VEET Transmitter Signal Ground MODULE DEFINITION Module Definition PIN 4 PIN 5 PIN 6 Interpretation by Host 4 SDA SCL MOD-ABS Serial module definition protocol Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SDA and SDL appear as no connector (NC) and MOD-ABS is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components. ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: [email protected] Fax: 886-3-5979737 http: // www.optoway.com.tw 2011/7/1 V1.0 Optoway SPS-6110WG 4 *********************************************************************************************************************************************************************** RECOMMENDED CIRCUIT SCHEMATIC Vee T Tx_DISABLE Tx_FAULT (1,17,20) 3 Tx_DISABLE 2 Tx_FAULT 10 KΩ TD + LD Driver 18 TD + Z=50Ω 100Ω TD - 19 TD Z=50Ω Vcc T 4 .7 μH 16 Vcc 3.3V 0.1μF 22 μF 0.1μF SerDes IC 0.1μF Vcc R 15 0.1μF RD - 22 μF 4 .7 μH 12 Protocol IC RD Z=50Ω 100Ω POST Amp RD + 13 RD + Z=50Ω depending on SERDES 10 KΩ LOS Vee R 30KΩ 8 RS1 9 RS0 7 30KΩ MOD_ABS EEPROM SCL SDA LOSS OF SINGAL (10,11,14) TX Rate Select RX Rate Select 6 MODULE DETECT 5 SCL 4 SDA 10 KΩ SFP+ module 10 KΩ 10 KΩ Vcc 3.3V PACKAGE DIAGRAM Units in mm Note: Specifications subject to change without notice. ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: [email protected] Fax: 886-3-5979737 http: // www.optoway.com.tw 2011/7/1 V1.0 Optoway SPS-6110WG 5 *********************************************************************************************************************************************************************** EEPROM Series ID Memory Contents (Address A0h) Addr. Hex ASCII 0 03 1 04 Note SFP+ Addr. Hex ASCII 32 20 33 20 LC 10G Base-LR 20 20 00 00 0E FA 53 S 50 00 2 3 4 5 6 7 8 07 20 00 00 00 10 10 9 01 10 F0 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 06 8C 00 0A 64 00 00 00 00 4F 50 54 4F 57 41 59 20 20 20 34 35 36 37 38 Long Distance (L) 39 Longwave Laser 40 (LL) Single Mode 41 (SM) 1600/1200/ 42 800/400 Mbytes/sec 64B/66B 43 14.025Gbps 44 45 10km 46 10km 47 48 49 50 51 O Vendor name 52 P 53 T 54 O 55 W 56 A 57 Y 58 59 60 61 30 31 20 20 62 63 Note Addr. Hex ASCII Note 64 00 Uncooled Tx, Txdis, Txfault, 65 1A LOS enable 66 00 Up bit rate 67 00 Low bit rate NA 68 Serial number: each piece with Vendor IEEE 69 different serial OUI 70 number 71 Addr. Hex ASCII 96 00 97 00 Part Number 72 98 99 100 101 102 103 104 00 00 00 00 00 00 00 P 73 105 00 53 S 74 106 00 2D 36 31 31 30 57 47 20 20 20 20 20 20 30 30 30 31 05 1E 6 1 1 0 W G 75 76 77 78 79 80 81 82 83 84 85 86 87 Revision, 88 depended on 89 version 90 91 1310 nm 92 93 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0 0 0 1 Reserved Checksum 0-62 94 95 Date Code 68 F0 05 Monitoring Soft Control and Monitoring SFF-8472V11.0 126 Checksum 64-94 127 Note Vendor specific EEPROM 00 00 ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: [email protected] Fax: 886-3-5979737 http: // www.optoway.com.tw 2011/7/1 V1.0 Optoway SPS-6110WG 6 *********************************************************************************************************************************************************************** EEPROM Series ID Memory Contents (Address A2h) Addr. 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Hex 55 00 FB 00 50 00 00 00 8C A0 75 30 88 B8 79 18 AF C8 03 E8 9C 40 07 D0 4D F1 0C 5A 3D E9 0F 8D Note Temp. High Alarm (85oC) Addr. 32 33 Temp. Low 34 Alarm(-5oC) 35 Temp. High 36 Warming(80oC) 37 Temp. Low 38 Warming (0oC) 39 Voltage High 40 Alarm (3.6V) 41 Voltage Low 42 Alarm(3.0V) 43 Voltage High 44 Warming(3.5V) 45 voltage Low 46 Warming (3.1V) 47 Tx Bias High 48 Alarm(90mA) 49 Tx BiasLow 50 Alarm(2mA) 51 52 Tx Bias High Warming(80mA) 53 54 Tx Bias Low Warming(4mA) 55 Tx Power High 56 Alarm (3dBm)) 57 Tx Power Low 58 Alarm(-5dBm) 59 Tx Power High 60 Warming(2dBm) 61 Tx Power Low 62 Warming (-4dBm) 63 Hex Note Addr. Hex Note Addr. Hex Note 4D Rx Power High 64 00 For External Cal. 96 Real Time Temp. MSB Alarm (3dBm) F1 65 00 For External Cal. 97 Real Time Temp. LSB 02 Rx Power Low 66 00 For External Cal. 98 Real Time Vcc MSB Real Time Vcc LSB 01 Alarm (-12.9dBm) 67 00 For External Cal. 99 Real Time Tx Bias MSB 3D Rx Power High 68 3F For External Cal. 100 E9 Warming (2dBm) 69 80 For External Cal. 101 Real Time Tx Bias LSB 03 Rx Power Low 70 00 For External Cal. 102 Real Time Tx Pwr MSB 2D Warming(-10.9dBm) 71 00 For External Cal. 103 Real Time Tx Pwr LSB Real Time Rx Pwr MSB 00 Reserved 72 00 For External Cal. 104 00 Reserved 73 00 For External Cal. 105 Real Time Rx Pwr LSB 00 Reserved 74 00 For External Cal. 106 Reserved Reserved 00 Reserved 75 00 For External Cal. 107 Reserved 00 Reserved 76 01 For External Cal. 108 00 Reserved 77 00 For External Cal. 109 Reserved 00 Reserved 78 00 For External Cal. 110 Tx Dis, Tx Fault, Rx Los 00 Reserved 79 00 For External Cal. 111 Reserved 00 Reserved 80 01 For External Cal. 112 Alarm Flag 00 Reserved 81 00 For External Cal. 113 Alarm Flag/Reserved 00 Reserved 82 00 For External Cal. 114 Reserved 00 Reserved 83 00 For External Cal. 115 Reserved 00 Reserved 84 01 For External Cal. 116 Warming Flag 00 Reserved 85 00 For External Cal. 117 Warming Flag/Reserved 00 Reserved 86 00 For External Cal. 118 Reserved 00 Reserved 87 00 For External Cal. 119 Reserved 00 For External Cal. 88 01 For External Cal. 120 Vendor Specific 00 For External Cal. 89 00 For External Cal. 121 00 For External Cal. 90 00 For External Cal. 122 00 For External Cal. 91 00 For External Cal. 123 00 For External Cal. 92 00 For External Cal. 124 00 For External Cal. 93 00 For External Cal. 125 00 For External Cal. 94 00 For External Cal. 126 00 For External Cal. 95 Check Sum 127 Note: Address 128 – 247: customer R/W eeprom. Address 248 – 255: Vendor Specific. Note: Specifications subject to change without notice. ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: [email protected] Fax: 886-3-5979737 http: // www.optoway.com.tw 2011/7/1 V1.0 Optoway SPS-6110WG 7 *********************************************************************************************************************************************************************** REVISION HISTORY Version 1.0 Subject Release Date Initial datasheet 2011/7/1 ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: [email protected] Fax: 886-3-5979737 http: // www.optoway.com.tw 2011/7/1 V1.0