NT IA PL M CO S oH *R Features Applications RoHS compliant* Telcordia GR1089 (Intra-Building) ESD protection >40 kV Protects 1 line Low clamping voltage Bidirectional configuration T1/E1 line cards ISDN telecom equipment XDSL, USB, SCSI & ethernet interfaces Data & bus lines for FCC Part 68 applications CDWBS16-PLC01-6 TVS Diode Array General Information The CDWBS16-PLC01-6 device provides protection for the external ports of telecom equipment such as cellular base stations, XDSL, USB, SCSI & Ethernet interfaces and data lines for FCC Part 68 applications. 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 Protection provided by the devices meets the IEC 61000-4-2 (ESD), 61000-4-4 (EFT) and 61000-4-5 (Surge) standards. The device measures 10.15 mm x 10 mm and is intended to be mounted directly onto an FR4 printed circuit board. Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Symbol Capacitance @ 0 V, 1 MHz Min. Nom. C Rated Standoff Voltage VWM Breakdown Voltage @ 1 mA VBR Max. Unit 50 pF 6 V 8 V Clamping Voltage @ IP = 100 A1 VC 15 V Clamping Voltage @ IP = 200 A2 VC 16 V Leakage Current @ VWM ID 25 µA ESD Protection: IEC 61000-4-2 Contact Discharge Air Discharge ±8 ±15 kV kV EFT Protection: IEC 61000-4-4 @ 5/50 ns 40 A Surge Protection: IEC 61000-4-5 @ 8/20 µs L3 (Line-Gnd), L4 (Line-Line) & L1 (Power) 48 A Surge Protection: Telcordia GR1089 (Intra-Building) @ 10/1000 µs 100 A Surge Protection: FCC Part 68 @ 10/160 µs 200 A Notes: 1. VC tested at 10/1000 µs impulse waveform. 2. 10/160 µs impulse waveform per FCC Part 68. Thermal Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Peak Pulse Power (td = 10/1000 µs) Operating Temperature Range Storage Temperature Range Symbol Min. Nom. PPP Max. Unit 1500 W TJ -55 25 +150 °C TSTG -55 25 +150 °C *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. CDWBS16-PLC01-6 TVS Diode Array Product Dimensions Recommended Footprint This is a molded JEDEC wide body SO-16 package with lead free 100 % Sn plating on the lead frame, weighs approximately 0.15 g and has a flammability rating of UL 94V-0. The dimensions for the packaged device are shown below. D C A B B C A D E DIMENSIONS = MILLIMETERS (INCHES) Dimensions E 10.7 Min. (0.420) A G F SEATING PLANE H B 5.225 ±0.127 (0.325 ±0.005) C 1.143 ±0.127 (0.045 ±0.005) D 0.762 ±0.127 (0.045 ±0.005) E 1.270 Typ. (0.050) J DIMENSIONS = MILLIMETERS (INCHES) GAGE PLANE I 0 ° to 8 ° How To Order K CD WBS16 - PLC01 - 6 Dimensions A 10.16 - 10.41 (0.400 - 0.410) G 2.65 Max. (0.104) B 1.27 (0.050) H 0.10 (0.004) C 7.45 - 7.59 (0.293 - 0.299) I 0.25 (0.010) D 10.15 - 10.65 (0.400 - 0.419) J 0.25 (0.010) Nom. E 0.35 - 0.51 (0.014 - 0.020) K F 0.10 - 0.30 (0.004 - 0.012) Common Code Chip Diode Package • WBS16 = Wide Body SOIC16 Package Model PLC01 = Model Number Rated Standoff Voltage 6 = 6 VBR (Volts) 0.40 - 1.27 (0.016 - 0.050) Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. CDWBS16-PLC01-6 TVS Diode Array Performance Graphs Peak Pulse Power vs Pulse Time Pulse Wave Form 150 1,500 W, 10/1000 µs Waveform 10 1 IPP – Peak Pulse Current (% of IPP) PPP – Peak Pulse Power (kW) 100 tt Test Waveform Parameters tt = 10 µs td = 160 µs Peak Value IPP 100 td = t|IPP/2 50 et 0 0.1 0.1 1 10 100 1,000 10,000 0 100,000 150 Block Diagram Power Derating Curve The device block diagrams below include the pin names and basic electrical connections associated with each channel. 15 14 13 12 11 10 9 100 % of Rated Power 16 300 t – Time (µs) td – Pulse Duration (µs) Peak Pulse Power 10/160 µs 80 60 40 20 Average Power 0 0 1 2 3 4 5 6 7 8 Typical Part Marking CDWBS16-PLC01-6..............................................................BLC01-6 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 25 50 75 100 TL – Lead Temperature (°C) 125 150 CDWBS16-PLC01-6 TVS Diode Array Packaging The surface mount product is packaged in a 16 mm x 8 mm tape and reel format per EIA-481 standard. TOP SIDE VIEW (INTO COMPONENT POCKET) DIMENSIONS = MILLIMETERS (INCHES) 4.0 ± 0.1 (.16 ± .004) 0.3 ± 0.05 (.01 ± .002) 1.5 ± 0.1/-0 (.06 ± .004/-0) DIA. 2.0 ± 0.05 (.08 ± .002) R 1.75 ± 0.1 (.07 ± .004) 0.3 MAX. (0.01) 3.1 ± 0.1 (.0122 ± .004) 16.0 ± 0.3 (.063 ± .01) 11.1 ± 0.1 (.437 ± .004) 5.5 ± 0.3 (.22 ± .01) 11.1 ± 0.1 (.437 ± .004) 8.0 ± 0.3 (.31 ± .01) ORIENTATION OF COMPONENT IN POCKET R 0.25 TYP. (0.010) BACKSIDE FACING UP REV. 07/12 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.