TOSHIBA 2SC3303Y

2SC3303
TOSHIBA Transistor
Silicon NPN Epitaxial Type (PCT process)
2SC3303
Industrial Applications
High Current Switching Applications
DC-DC Converter Applications
Unit: mm
•
Low collector saturation voltage: VCE (sat) = 0.4 V (max) (IC = 3 A)
•
High speed switching time: tstg = 1.0 μs (typ.)
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
Collector-base voltage
VCBO
100
V
Collector-emitter voltage
VCEO
80
V
Emitter-base voltage
VEBO
7
V
DC
IC
5
Pulse
ICP
8
IB
1
Collector current
Base current
Collector power
dissipation
Ta = 25°C
Tc = 25°C
Junction temperature
Storage temperature range
PC
1.0
20
A
A
W
Tj
150
°C
JEDEC
―
Tstg
−55 to 150
°C
JEITA
―
TOSHIBA
2-7J1A
Note: Using continuously under heavy loads (e.g. the application of high
temperature/current/voltage and the significant change in
Weight: 0.36 g (typ.)
temperature, etc.) may cause this product to decrease in the
reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are
within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/”Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
1
2010-02-05
2SC3303
Electrical Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
Min
Typ.
Max
Unit
Collector cut-off current
ICBO
VCB = 100 V, IE = 0
―
―
1
μA
Emitter cut-off current
IEBO
VEB = 7 V, IC = 0
―
―
1
μA
V (BR) CEO
IC = 10 mA, IB = 0
80
―
―
V
VCE = 1 V, IC = 1 A
70
―
240
hFE (2)
VCE = 1 V, IC = 3 A
40
―
―
Collector-emitter saturation voltage
VCE (sat)
IC = 3 A, IB = 0.15 A
―
0.2
0.4
V
Base-emitter saturation voltage
VBE (sat)
IC = 3 A, IB = 0.15 A
―
0.9
1.2
V
fT
VCE = 4 V, IC = 1 A
―
120
―
MHz
VCB = 10 V, IE = 0, f = 1 MHz
―
80
―
pF
―
0.2
―
―
1.0
―
―
0.1
―
Collector-emitter breakdown voltage
hFE (1)
(Note)
DC current gain
Transition frequency
Collector output capacitance
Cob
Turn-on time
ton
20 μs
OUTPUT
IB1
Storage time
tstg
Fall time
tf
IB2
10 Ω
Switching time
IB1
INPUT
IB2
μs
VCC ≈ 30 V
IB1 = −IB2 = 0.15 A,
DUTY CYCLE ≤ 1%
Note: hFE (1) classification O: 70 to 140, Y: 120 to 240
Marking
C3303
Part No. (or abbreviation code)
Lot No.
Characteristics
indicator
Note 1:
Note 1
A line under a Lot No. identifies the indication of product Labels.
Not underlined: [[Pb]]/INCLUDES > MCV
Underlined: [[G]]/RoHS COMPATIBLE or [[G]]/RoHS [[Pb]]
Please contact your TOSHIBA sales representative for details as to environmental matters such as the
RoHS compatibility of Product. The RoHS is the Directive 2002/95/EC of the European Parliament and
of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in
electrical and electronic equipment.
2
2010-02-05
2SC3303
IC – VCE
VCE – IC
0.8
60
70
Common emitter
Tc = 25°C
Collector current IC
(A)
50
40
4
30
3
20
2
IB = 10 mA
1
0
0
VCE (V)
100 90 80
Collector-emitter voltage
5
0
2
4
6
8
10
Collector-emitter voltage
12
Common emitter
IB = 20 mA
80
0.4
0.2
100
140
1
2
VCE (V)
VCE – IC
5
VCE – IC
60
80
VCE (V)
40
IB = 20 mA
0.6
Collector-emitter voltage
VCE (V)
Collector-emitter voltage
4
(A)
0.8
100
0.4
140
0.2
Common emitter
Tc = 25°C
0
0
1
2
3
Collector current IC
4
IB = 20 mA
40
60
80
100
0.6
140
0.4
0.2
Common emitter
Tc = −55°C
0
0
5
1
(A)
2
3
Collector current IC
hFE – IC
4
5
(A)
VCE (sat) – IC
5
Collector-emitter saturation voltage
VCE (sat) (V)
1000
500
DC current gain hFE
3
Collector current IC
0.8
300
Tc = 100°C
100
25
50
−55
30
10
Common emitter
5
VCE = 1 V
2
0.003
60
0.6
0
0
14
40
Tc = 100°C
0.01
0.03
0.1
0.3
Collector current IC
1
3
3
IC/IB = 20
1
0.5
0.3
0.1
(A)
Tc = −55°C
0.05
100
0.03
25
0.01
0.003
10
Common emitter
0.01
0.03
0.1
0.3
Collector current IC
3
1
3
10
(A)
2010-02-05
2SC3303
VBE (sat) – IC
IC – VBE
5
Common emitter
Common emitter
IC/IB = 20
VCE = 1 V
(A)
10
5
3
Collector current IC
Base-emitter saturation voltage
VBE (sat) (V)
30
Tc = −55°C
1
0.5
25
100
0.3
0.1
0.003
0.01
0.03
0.3
0.1
Collector current IC
1
3
10
4
3
2
Tc = 100°C
25
−55
1
(A)
0
0
0.4
0.2
0.6
0.8
Base-emitter voltage
rth – tw
(A)
100
(2)
10
(1)
1
Pulse width
1
10
100
10 μs*
IC max (continuous)
3
100 μs*
1 ms*
10 ms*
1
DC operation
Tc = 25°C
0.5
0.3
*: Single nonrepetitive pulse
0.1
0.1
VBE (V)
IC max (pulsed)*
5
(2) No heat sink
Collector current IC
Transient thermal resistance
rth (°C/W)
10
(1) Infinite heat sink
0.01
1.4
Safe Operating Area
nonrepetitive pulse)
0.001
1.2
20
Curves should be applied in thermal limited area. (single
0.1
1.0
1000
Tc = 25°C
Curves must be derated linearly
0.05 with increase in temperature.
tw (s)
0.03
0.3
1
3
10
Collector-emitter voltage
4
30
100
VCE (V)
2010-02-05
2SC3303
RESTRICTIONS ON PRODUCT USE
• Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR
APPLICATIONS.
• Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
5
2010-02-05