Optoway SPS-2340WG 1 *********************************************************************************************************************************************************************** SPS-2340WG (RoHS Compliant) 10.3 Gb/s / 40 km / 1550 nm Digital Diagnostic SFP+ LC SINGLE-MODE TRANSCEIVER *********************************************************************************************************************************************************************** FEATURES DESCRIPTION l l l l l l l l l l l l The SPS-2340WG series single mode transceiver is small form factor pluggable module for bi-directional serial optical data communications such as IEEE 802.3ae 10GBASE-ER/EW and 10G FC. It is with the SFP+ 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. This module is designed for single mode fiber and operates at a nominal wavelength of 1550 nm. The transmitter section uses a temperature-stabilized 1550 nm electrical-modulated laser (EML) and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. Support 9.95 Gbps to 10.5 Gbps Complaint with SFP+ MSA Compliant to IEEE 802.3ae 10GBASE-ER SFF-8472 Digital Diagnostic Function Temperature-stabilized 1550 nm EML Transmitter Distance up to 40 km at SM Fiber AC/AC Coupling according to MSA Single +3.3 V Power Supply Low Power consumption (max. 1.5W) RoHS 6/6 Compliant 0 to 70oC Operating Class 1 Laser International Safety Standard IEC-60825 Compliant APPLICATIONS LASER SAFETY l 10GBASE-ER/EW l 40 km 10G Fibre Channel This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. ORDER INFORMATION P/No. SPS-2340WG Bit Rate (Gb/s) 10GBASE Distance (km) Wavelength (nm) Package Temp. (oC) RoHS Compliant 10.3 ER / EW 40 1550 EML SFP+ with DMI 0 to 70 Yes Absolute Maximum Ratings Parameter Storage Temperature Relative Humidity Operating Case Temperature Power Supply Voltage Receiver Input Optical Power Symbol Tstg RH Topr Vcc Mip Min -40 5 0 -0.5 Max 85 85 70 3.6 3 Units o C % o C V dBm Notes Non-condensing Average power Recommended Operating Conditions Parameter Power Supply Voltage Operating Case Temperature Relative Humidity Power Supply Current Data Rate Total Power Dissipation Symbol Vcc Topr RH ICC (TX+RX) Min 3.135 0 5 Typ 3.3 85 320 10.3125 Max 3.465 70 % 450 10.5 1.5 Units / Notes V o C Non-condensing mA Gb/s W/1 Note 1: The inrush current is TBD. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 4/1/2010 V1.0 Optoway SPS-2340WG 2 *********************************************************************************************************************************************************************** Transmitter Optical Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3.47V) Parameter Average Launch Power Optical Modulation Amplitude Output Center Wavelength Output Spectrum Width Side Mode Suppression Ratio Extinction Ratio Relative Intensity Noise Transmitter and Dispersion Penalty Average Launch Power of OFF Transmitter Symbol Po, Avg Po, OMA λc σλ SMSR ER RIN TDP Min -4.7 -1.7 1530 Typ Max +4.0 Units dBm 1565 1 nm nm dB -128 3 dB/Hz dB -30 dBm 30 3.0 Notes 2 -20 dB width 2. Output power is power coupled into a 9/125 µm single-mode fiber. Receiver Optical Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3.47V) Parameter Sensitivity in Average Power Receiver Sensitivity in OMA Stressed Receiver Sensitivty in OMA Receiver Overload LOS -- Deasserted LOS -- Asserted Wavelength of Operation Symbol Sen1 Sen2 Min Typ Max -15.8 -14.1 -11.3 Units dBm dBm dBm P MAX LOSD LOSA λc -1 ---28 1530 ------- -16 --1565 dBm dBm dBm nm Min Typ Max Units 10.3125 100 10.5 Notes 3 Transition: low to high Transition: high to low 3. BER < 10 -12 and PRBS 231-1 at 10.3125 Gb/s.. Electrical Characteristics Parameter Symbol High-Speed Signal (CML) Interface Specification Input Data Rate Differential Input Impedance Rin Differential Data Input Amplitude Output Data Rate Differential Output Impedance Rout Differential Data Output Amplitude Low-Speed Signal (LVTTL) Interface Specification Input High Voltage Input Low Voltage Output High Voltage Output Low Voltage 340 850 Gb/s Ω mVpp Gb/s Ω mVpp 2.0 GND 2.4 GND Vcc+0.3 0.8 Vcc 0.5 V V V V 120 10.3125 100 820 10.5 Notes Internally AC coupled Internally AC coupled ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 4/1/2010 V1.0 Optoway SPS-2340WG 3 *********************************************************************************************************************************************************************** CONNECTION DIAGRAM PIN Signal Name 1 2 VEET TX_Fault 3 TX_Disable 4 SDA 5 SDL 6 7 MOD-ABS RS0 8 9 RX_LOS RS1 10 VEER Description PIN Signal Name Transmitter Signal Ground Transmitter Fault Indication. Logic “1” Output = Laser Fault. Logic “0” Output = Normal Operation Logic “1” Input (or no connection) = Laser off, Logic “0” = Laser on. Modulation Definition 2 – Two wires serial ID Interface Modulation Definition 1 – Two wires serial ID Interface Modulation Definition 0 – Ground in Module RX Rate Select (LVTTL). This pin has an internal 30k pulldown to ground. A signal on this pin will not affect module performance. Loss of Signal Out (OC). TX Rate Select (LVTTL). This pin has an internal 30k pulldown to ground. A signal on this pin will not affect module performance. Receiver Signal Ground Description 11 12 VEER RD- Receiver Signal Ground Inverse Receiver Data Out 13 RD+ Receiver Data Out 14 VEER Receiver Signal Ground 15 VCCR Receiver Power – 3.3V±5% 16 17 VCCT VEET Transmitter Power – 3.3V±5% Transmitter Signal Ground 18 19 TD+ TD- Transmitter Data In Inverse Transmitter Data In 20 VEET Transmitter Signal Ground MODULE DEFINITION Module Definition 4 PIN 4 SDA PIN 5 SCL PIN 6 MOD-ABS Interpretation by Host Serial module definition protocol Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SDA and SDL appear as no connector (NC) and MOD-ABS is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E 2PROM protocol of the ATMEL AT24C01A/02/04 family of components. ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 4/1/2010 V1.0 Optoway SPS-2340WG 4 *********************************************************************************************************************************************************************** RECOMMENDED CIRCUIT SCHEMATIC Vee T Tx_DISABLE Tx_FAULT ( 1,17,20) 3 Tx_DISABLE 2 Tx_FAULT 10 KΩ TD + LD Driver 18 TD + Z=50Ω 100Ω TD - 19 TD Z=50Ω Vcc T 4 .7 μH 16 Vcc 3.3V 0.1μF 22 μF 0.1μF SerDes IC 0.1μF Vcc R 15 0.1μF RD - 22 μF 4 .7 μH 12 Protocol IC RD Z=50Ω 100Ω POST Amp RD + 13 RD + Z=50Ω depending on SERDES 10 KΩ LOS Vee R 30K Ω 8 RS1 9 RS0 7 30K Ω MOD_ABS EEPROM SCL SDA LOSS OF SINGAL ( 10,11,14) TX Rate Select RX Rate Select 6 MODU LE DETECT 5 SCL 4 SDA 10 KΩ SFP+ module 10 KΩ 10 KΩ Vcc 3.3V PACKAGE DIAGRAM Units in mm Note: Specifications subject to change without notice. ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 4/1/2010 V1.0 Optoway SPS-2340WG 5 *********************************************************************************************************************************************************************** EEPROM Series ID Memory Contents (Address A0h) Addr. Hex ASCII 0 03 1 04 2 3 4 5 6 7 8 07 80 00 00 00 10 10 9 01 10 C0 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 06 69 00 28 FF 00 00 00 00 4F 50 54 4F 57 41 59 20 20 20 20 20 Note SFP+ Addr. Hex ASCII 32 20 33 20 LC 10G Base-ER 20 20 00 00 0E FA 53 S 50 P 53 2D 32 33 34 30 57 47 20 20 20 20 20 20 30 30 30 30 06 0E 00 34 35 36 37 38 Long Distance (L) 39 Longwave Laser 40 (LL) Single Mode 41 (SM) 1200 / 800 42 Mbytes/sec 64B/66B 43 10.5Gbps 44 45 40km 46 >25.4km 47 48 49 50 51 O Vendor name 52 P 53 T 54 O 55 W 56 A 57 Y 58 59 60 61 62 63 Note Addr. Hex ASCII Note 64 06 Cooled Tx, Power Level 2, 65 1A Txdis, Txfault, LOS enable 66 00 Up bit rate 67 00 Low bit rate NA 68 Serial number: each piece with Vendor IEEE 69 different serial OUI 70 number 71 Part Number 72 Addr. Hex ASCII 96 00 97 00 98 99 100 101 102 103 104 00 00 00 00 00 00 00 73 105 00 S 74 106 00 2 3 4 0 W G 75 76 77 78 79 80 81 82 83 84 85 86 87 Revision, 88 depended on 89 version 90 91 1550 nm 92 93 Reserved 94 Checksum 0-62 95 107 108 109 110 111 112 113 114 115 116 Date Code 117 118 119 120 121 122 123 Monitoring 124 Soft Control 125 SFF-8472V10.4 126 Checksum 64-94 127 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0 0 0 1 68 F0 04 Note Vendor specific EEPROM ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 4/1/2010 V1.0 Optoway SPS-2340WG 6 *********************************************************************************************************************************************************************** EEPROM Series ID Memory Contents (Address A2h) Addr. 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Hex Note 4B Temp. High Alarm (75oC) 00 FB Temp. Low Alarm(-5oC) 00 46 Temp. High Warming(70 oC) 00 00 Temp. Low Warming (0 oC) 00 8C Voltage High Alarm (3.6V) A0 75 Voltage Low Alarm(3.0V) 30 88 Voltage High Warming(3.5V) B8 79 voltage Low Warming (3.1V) 18 EA Tx Bias High Alarm(120mA) 60 27 Tx BiasLow Alarm(20mA) 10 D6 Tx Bias High Warming (110mA) D8 3A Tx Bias Low Warming (30mA) 98 7B Tx Power High Alarm (5dBm)) 87 0A Tx Power Low Alarm(-5.7dBm) 84 62 Tx Power High Warming(4dBm) 1F 0D Tx Power Low 3C Warming (-4.7dBm) Addr. 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 Hex Note Addr. Hex Note Addr. Hex Note 27 Rx Power High 64 00 For External Cal. 96 Real Time Temp. MSB Alarm (0dBm) 65 00 For External Cal. 97 Real Time Temp. LSB 10 00 Rx Power Low 66 00 For External Cal. 98 Real Time Vcc MSB A6 Alarm (-17.8dBm) 67 00 For External Cal. 99 Real Time Vcc LSB Real Time Tx Bias MSB 1F Rx Power High 68 3F For External Cal. 100 Real Time Tx Bias LSB 07 Warming (-1dBm) 69 80 For External Cal. 101 Real Time Tx Pwr MSB 01 Rx Power Low 70 00 For External Cal. 102 Real Time Tx Pwr LSB 07 Warming(-15.8dBm) 71 00 For External Cal. 103 00 Reserved 72 00 For External Cal. 104 Real Time Rx Pwr MSB Real Time Rx Pwr LSB 00 Reserved 73 00 For External Cal. 105 00 Reserved 74 00 For External Cal. 106 Reserved 00 Reserved 75 00 For External Cal. 107 Reserved 00 Reserved 76 01 For External Cal. 108 Reserved 00 Reserved 77 00 For External Cal. 109 Reserved Tx Dis, Tx Fault, Rx Los 00 Reserved 78 00 For External Cal. 110 00 Reserved 79 00 For External Cal. 111 Reserved 00 Reserved 80 01 For External Cal. 112 Alarm Flag 00 Reserved 81 00 For External Cal. 113 Alarm Flag/Reserved 00 Reserved 82 00 For External Cal. 114 Reserved 00 Reserved 83 00 For External Cal. 115 Reserved 00 Reserved 84 01 For External Cal. 116 Warming Flag 00 Reserved 85 00 For External Cal. 117 Warming Flag/Reserved 00 Reserved 86 00 For External Cal. 118 Reserved 00 Reserved 87 00 For External Cal. 119 Reserved Vendor Specific 00 For External Cal. 88 01 For External Cal. 120 00 For External Cal. 89 00 For External Cal. 121 00 For External Cal. 90 00 For External Cal. 122 00 For External Cal. 91 00 For External Cal. 123 00 For External Cal. 92 00 For External Cal. 124 00 For External Cal. 93 00 For External Cal. 125 00 For External Cal. 94 00 For External Cal. 126 00 For External Cal. 95 Check Sum 127 Note: Address 128 – 247: customer R/W eeprom. Address 248 – 255: Vendor Specific. Note: Specifications subject to change without notice. ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 4/1/2010 V1.0 Optoway SPS-2340WG 7 *********************************************************************************************************************************************************************** REVISION HISTORY Version 1.0 Subject Initial datasheet Release Date 2010/4/1 ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 4/1/2010 V1.0