Noise Suppression Products/EMI Suppression Filters > EMIFILr (Capacitor type) > Array Data Sheet 1 EMIFILr (Capacitor type) Array NFA31C Series (1206 Size) c Dimensions c Insertion Loss Characteristics (Main Items) NFA31CC470S1E4 NFA31CC220S1E4 1.6±0.2 20 (8) (9) Insertion Loss (dB) 0.8±0.2 0.4±0.2 (7) (50Ω - 50Ω) 0 3.2±0.2 0.8±0.1 1.1±0.5 (10) NFA31CC222R1E4 NFA31CC102R1E4 60 NFA31CC471R1E4 NFA31CC221S1E4 NFA31CC101S1E4 (2) (1) NFA31CC223R1C4 40 80 (3) 0.05 min. 0.05 min. (4) (5) (6) 100 : Electrode 1 10 (in mm) c Equivalent Circuit 1000 2000 c Packaging Code Packaging Minimum Quantity D 180mm Paper Tape 4000 B Bulk(Bag) 100 Input (Output) (7) 100 Frequency (MHz) (8) (9) (10) GND (1) (2) GND (3) (4) (5) (6) Output (Input) No polarity. c Rated Value (p: packaging code) Part Number Capacitance Rated Current Rated Voltage Insulation Resistance (min.) Operating Temperature Range NFA31CC220S1E4p 22pF ±20% 200mA 25Vdc 1000M ohm -40 to +85°C NFA31CC470S1E4p 47pF ±20% 200mA 25Vdc 1000M ohm -40 to +85°C NFA31CC101S1E4p 100pF ±20% 200mA 25Vdc 1000M ohm -40 to +85°C NFA31CC221S1E4p 220pF ±20% 200mA 25Vdc 1000M ohm -40 to +85°C NFA31CC471R1E4p 470pF ±20% 200mA 25Vdc 1000M ohm -40 to +85°C NFA31CC102R1E4p 1000pF ±20% 200mA 25Vdc 1000M ohm -40 to +85°C NFA31CC222R1E4p 2200pF ±20% 200mA 25Vdc 1000M ohm -40 to +85°C NFA31CC223R1C4p 22000pF ±20% 200mA 16Vdc 1000M ohm -40 to +85°C Number of Circuit: 4 Continued on the following page. oThis data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.9.6 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > EMIFILr (Capacitor type) > Array Data Sheet 2 Continued from the preceding page. c !Caution/Notice !Caution (Rating) Do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. Notice Solderability of Tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the Tin melting point is used. Please confirm the solderability of Tin plating termination chip before use. oThis data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.9.6 http://www.murata.com/