Power Inductors - Shielded CTIHLP107F Series SPECIFICATIONS Parts are only available ±20% inductance tolerance only *Irms DC current (A) will cause an approximately ΔT of 40°C. **Isat DC current (A) will cause L0 to drop approximately 20%. Part Number Inductance (µH) L Test Freq. (KHz) *Irms Typ. (A) **Isat Typ. (A) DCR Max. Ω) (mΩ CTIHLP107F-R50M 0.50 100 32 40 0.8 PHYSICAL DIMENSIONS Not shown at actual size. Size RoHS mm inches Compliant ctparts.com A B C D Max. Max. Max. Typ. 10.3 11.5 7.0 3.0 0.40 0.45 0.27 0.12 B A XXX D C CHARACTERISTICS Marking: Inductance Code Description: SMD (shielded) power inductor Applications: High density DC/DC converters. POL converters. High current VRM/VRD for notebooks, Servers, and desktop CPUs. High speed chargers. Operating Temperature: -55°C to +125°C Inductance Tolerance: ±20% Testing: Inductance is tested on an HP4285A at 100KHz, 0.5V Packaging: Tape & Reel Marking: Parts are marked with inductance code Miscellaneous: RoHS Compliant. Additional Information: Additional electrical & physical information available upon request Samples available. See website for ordering information. RECOMMENDED LAND PATTERN Unit: mm 3.5 4.0 9.5 CENTRAL Technologies 03.06.07 Manufacturer of Passive and Discrete Semiconductor Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2007 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice