Model 9064 - Frequency Devices

Model 9064
64 Channels -
Programmable Filter/Amplifier
Instrument
Certified
Description:
Frequency Devices’ Model 9064 programmable
filter/amplifier system consists of a mainframe that
houses the power supply, digital controller, interface
electronics, sockets and mounting space for up to
16 plug-in quad or dual channel cards. It also
provides a common input/output bus for monitoring,
under control of a remote computer, via an
IEEE-488 or RS-232 interface.
Each channel card contains configuration bits that
can be identified by the controller and can be
electrically connected to the I/O bus in order to
facilitate system check-out. Channel card options
available are pre and post gain, single ended or
differential input/output and operation in the bypass
or active mode.
Features/Benefits:
• Wide selection of standard signal conditioning
modules in a system configuration that provides
versatility of use in many applications.
• Simultaneous access over 64 channels offers a
convenient way to provide filtering and gain.
• Menu driven operation results in rapid set-up and
configuration.
• Universal card slots allow for replacement or
swapping of channel cards without hardware or
firmware changes.
Quad Cards Available
64PF
Programmable filter
64PFA
Programmable filter/amplifier
64PA
Programmable amplifier
64FF
Fixed frequency filter
64DB
Differential buffer amplifier
Dual Cards Available
32PA-260/PF
Programmable amplifier/filter
32PA-140/PF
Programmable amplifier/filter
32PB
Programmable bandpass filter
32PBA
Programmable bandpass filter/amplifier
32PN
Programmable Notch Filter
Signal conditioning applications include:
• Sonar, navigation and aerospace
• Engine test and simulation
• Acoustic, vibration analysis & control
• Satellite and telecommunications
• Automatic test equipment (ATE)
Note:
Please contact the factory for custom or
modifications to existing channel cards.
Ordering Information
Interface
488 or RS 232
Quantity
1 to 16 Channels
Chassis 9064/64 B-488
Channels
16, 32, 48, or 64
16/64PFA
Channel Cards
B-BNC, T-Terminal Block Connectors
55
25 Locust St. • Haverhill, Massachusetts 01830 • (800) 252-7074 • (978) 374-0761 • FAX (978) 521-1839
e-mail: [email protected] • Web Address: http://www.freqdev.com • Fax on Demand: 978/521-5178
Model 9064
Specifications
(@ 25°C and rated power input)
General
1. Interface
2. Pre and Post Filter Gain
3. Available Filters
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
IEEE-488 or RS-232
0.5 to 60 dB see channel card specifications
4- and 8-pole Butterworth, Bessel, elliptic and
constant delay transfer functions
0.1 Hz to 102.4 kHz
256:1
See filter specifications
See filter specifications
See filter specifications
See filter specifications
See filter specifications
BNC or Terminal Blocks on bottom of main frame
100, 110, 220, 240 VAC @ 50/60 Hz
190 watts
0°C to 50°C
7.0¢¢H x 19.0¢¢W x 25.0¢¢D
17.78 cm H x 48.26 cm W x 63.50 cm D
80 lbs., 36.2 kg
Programmable Filter Frequency Range(fc)
Frequency Tuning
Phase Match
Harmonic Distortion @ 1 kHz
Amplitude Accuracy
Wide Band Noise
Narrow Band Noise
Signal I/O
Power Connector
Power
Operating Temperature
Dimensions
16. Weight
Input Characteristics
17. Input Impedance:
• Differential
• Single Ended
18. Coupling
19. Maximum Input Signal
20. Input Voltage:
• Linear Differential
• Max Safe Differential
• Max Safe Common Mode
21. Common Mode Rejection Ratio with less than
2 k ½ Source Unbalance and 0 dB Gain
2 M½ shunted by 24 pF to Analog Ground
1 M½ shunted by 47 pF to Analog Ground
DC standard, AC (optional)
±10Vpk @ 0 dB
20V pp (gain set @ 0 dB)
Any continuous value between ±100V
Any continuous value between ±100V
60 dB typ. @ 1 kHz
Output Characteristics
22. Full Power Bandwidth
23. Small Signal Bandwidth (1 V p-p)
24. Output Impedance
25. Offset Voltage
26. Offset Temp. Coeff.
27. Current
28. Maximum Voltage (open circuit)
29. Cross-Talk between Channels
200 kHz
400 kHz (@ -3 dB)
50 ½
±2mV
50µV/°C
±50 mA into 50 ½
±10Vpk
-90 dB max., 0 to 100 kHz
Options
30. Additional Operators Manual
31. Rack Mount Assembly
One copy included with each order
Included
We hope the information given here will be helpful. The information is based on data and our best knowledge, and we consider the information to be true and accurate. Please read all statements,
recommendations or suggestions herein in conjunction with our conditions of sale which apply to all goods supplied by us. We assume no responsibility for the use of these statements,
recommendations or suggestions, nor do we intend them as a recommendation for any use which would infringe any patent or copyright.
PR-9064-00
56
25 Locust St. • Haverhill, Massachusetts 01830 • (800) 252-7074 • (978) 374-0761 • FAX (978) 521-1839
e-mail: [email protected] • Web Address: http://www.freqdev.com • Fax on Demand: 978/521-5178