Accetek Power Inductor Common Mode Filter Accetek Contents Contents 1MA Series Shielded Power Inductor Low DCR Type 1MB Series Shielded Power Inductor Page Low Cost Type Page 2 1MC Series Unshielded Power Inductor 8 Page 1MD Series Shielded Power Inductor 12 1ME Series Shielded Power Inductor 16 Page 1ME-H Series Shielded Power Inductor 24 1MF Series Shielded Power Inductor Page 1MG Series Unshielded Power Inductor Page 1MK Series Multilayer Power Inductor Page 1MZ-L Series Leaded Power Inductor Page 60 Page 2CA Series Common Mode Filter 64 2CB/2CC Series Common Mode Filter Page 52 55 2MA Series Coupled Power Inductor Page 42 45 1MZ Series Leaded Power Inductor Page 35 39 1MT Series High Current Power Inductor Page Page 70 Page Soldering Profile 73/76 Page 78 REMARK: Specifications are subject to change without notice. Contact Accetek Sales Office for the latest specifications. Specifications are typical and may not apply to all applications. Accetek Electronics (Shenzhen) Co., Ltd. www.accetek.com Catalog-Power Inductor-2015A 1 1MA Series Shielded Power Inductor– Low DCR Type Accetek A FEATURES Shielded Construction with very low DCR Heating Current rating up to 17.9 Amps Saturation Current rating up to 27.5 Amps (based on only 10% inductance drop) Inductance up to 1000μH for all case size (129 size up to 2.2mH) 260°C reflow peak temperature qualified Operating Temperature range from -40°C to +125°C (Including Self-heating) High strength sealing epoxy with stable temperatures character to keep the parts strong at wide range temperatures: (Typical Hardness: ShoreD86 @25°C, ShoreD70 @125°C) Available up to 129 size (12.5×12.5×10.0mm) to meet with higher current requirements Available for both Metal Base and Plastic Base: Plastic Base: Because of the one piece construction and better adhesion so they are more suitable for high vibration or shock applications Metal Base: For general use and more competitive cost than Plastic base B PART NUMBER SYSTEM 1MA 125 ❶ ❷ - 100 M F P ❸ ❹ ❺ ❻ ❶ Series 1MA Series Code ❸ Inductance Code e.g. Calculation 2R2 2.2μH 100 10×100μH = 10μH 101 10×101μH = 100μH ❹ C Dimension Code (L*W*H) (mm) ❷ 73 (7.6×7.6×3.55) 125 (12.5×12.5×6.0) 74 (7.6×7.6×4.6) 127 (12.5×12.5×8.0) 124 (12.5×12.5×4.5) 129 (12.5×12.5×10.0) ❺ RoHS Compliant Inductance Tolerance ❻ Base Type K ±10% P Plastic Base M ±20% M Metal Base N ±30% DRAWINGS AND DIMENSIONS 1 Schematic 2 A1 1MA73 7.60 Max [0,299] 2 XXX 1 1 2 A2 8.00 [0,315] 2.00 [0,079] 1,60 2,20 [0,087] 1 3.55 Max [0,140] Accetek Electronics (Shenzhen) Co., Ltd. 2 1.13 [0,044] Land Pattern www.accetek.com 1,70 [0,067] 2.00 [0,079] [0,063] 7.60 Max [0.299] 2 8.00 [0,315] 1,5 [0,059] 3.55 Max [0,140] 1,50 Land Pattern [0,059] Catalog-Power Inductor-2015A 1MA Series Shielded Power Inductor– Low DCR Type Accetek B1 1MA74 7.60 Max [0,299] B2 8.00 [0,315] 2 XXX 1 1 2.00 [0,079] 2 1,60 8.00 [0,315] 2,20 [0,087] 2 1 1,5 [0,059] 2.00 [0,079] [0,063] 4.60 Max [0,181] 7.60 Max [0.299] Land Pattern 1.13 [0,044] Land Pattern 4,60 Max 1,50 [0,181] [0,059] C1 1MA124 1,70 [0,067] C2 13,80 [0,543] 12,50 Max 2 [0,492] XXX 1 1 12,50 Max [0,492] 2 4,90 Typ [0,193] 2,05 Typ [0,081] 4,50 Max [0,177] 1 5.00 Typ [0,197] 5,50 [0,217] 3,85 [0,152] 2,50 Typ [0,098] 4,80 Max [0,189] D1 1MA125 2 Land Pattern D2 13,80 [0,543] 12,50 Max 2 [0,492] XXX 1 1 12,50 Max [0,492] 4,90 Typ [0,193] 2 2,05 Typ [0,081] 6.00 Max [0,236] 1 5.00 Typ [0,197] 5,50 [0,217] 3,85 [0,152] 2,50 Typ [0,098] 6.00 Max [0,236] E1 1MA127 2 Land Pattern E2 13,80 [0,543] 12,50 Max 2 [0,492] XXX 1 1 12,50 Max [0,492] 2 4,90 Typ [0,193] 2,05 Typ [0,081] 8.00 Max [0,315] 1 5.00 Typ [0,197] 5,50 [0,217] 3,85 [0,152] 2,50 Typ [0,098] 8.00 Max [0,315] F1 1MA129 2 Land Pattern F2 13,80 [0,543] 12,50 Max 2 [0,492] XXX 12,50 Max [0,492] 1 1 10.00 Max [0,394] 2 4,90 Typ [0,193] 2,05 Typ [0,081] 1 10.00 Max [0,394] 2 5.00 Typ [0,197] 2,50 Typ [0,098] 5,50 [0,217] 3,85 [0,152] Land Pattern XXX = Inductance value Accetek Electronics (Shenzhen) Co., Ltd. www.accetek.com Catalog-Power Inductor-2015A 3 1MA Series Shielded Power Inductor– Low DCR Type Accetek D SPECIFICATIONS Inductance2 Drawing Fig. Tolerance Typ.(Ω) Max.(Ω) Irms4(A) Isat5 (A) Metal Base 1MA73-R33NF_ 0.33 ±30% 0.0074 0.0111 6.19 11.00 A1 A2 1MA73-1R0NF_ 1.00 ±30% 0.0103 0.0155 5.25 6.40 A1 A2 1MA73-1R5NF_ 1.50 ±30% 0.0132 0.0198 4.64 5.60 A1 A2 1MA73-2R2NF_ 2.20 ±30% 0.0167 0.0234 4.11 4.80 A1 A2 1MA73-3R3NF_ 3.30 ±30% 0.0259 0.0311 3.31 4.20 A1 A2 1MA73-4R7MF_ 4.70 ±20% 0.0297 0.0356 3.09 3.60 A1 A2 1MA73-6R8MF_ 6.80 ±20% 0.0435 0.0522 2.55 2.90 A1 A2 1MA73-8R2MF_ 8.20 ±20% 0.0592 0.0690 2.19 2.70 A1 A2 1MA73-100MF_ 10.0 ±20% 0.0656 0.0720 2.08 2.20 A1 A2 1MA73-150MF_ 15.0 ±20% 0.0844 0.1013 1.83 1.80 A1 A2 1MA73-220MF_ 22.0 ±20% 0.107 0.128 1.62 1.50 A1 A2 1MA73-330MF_ 33.0 ±20% 0.166 0.199 1.31 1.20 A1 A2 1MA73-470MF_ 47.0 ±20% 0.241 0.289 1.08 1.00 A1 A2 1MA73-680MF_ 68.0 ±20% 0.358 0.430 0.89 0.85 A1 A2 1MA73-820MF_ 82.0 ±20% 0.384 0.461 0.86 0.80 A1 A2 Plastic Base 1MA73-101MF_ 100 ±20% 0.527 0.632 0.73 0.76 A1 A2 1MA73-151MF_ 150 ±20% 0.851 1.021 0.58 0.53 A1 A2 1MA73-221MF_ 220 ±20% 1.050 1.260 0.52 0.49 A1 A2 1MA73-331MF_ 330 ±20% 1.590 1.908 0.42 0.40 A1 A2 1MA73-471MF_ 470 ±20% 2.360 2.832 0.35 0.33 A1 A2 1MA73-681MF_ 680 ±20% 3.470 4.164 0.29 0.26 A1 A2 1MA73-821MF_ 820 ±20% 3.930 4.716 0.27 0.23 A1 A2 1MA73-102MF_ 1000 ±20% 4.340 5.208 0.26 0.21 A1 A2 1MA74-R33NF_ 1MA74-1R0NF_ 0.33 1.00 ±30% ±30% 0.0074 0.0100 0.0111 0.0150 6.20 5.33 12.50 10.20 B1 B1 B2 B2 1MA74-1R5NF_ 1.50 ±30% 0.0115 0.0173 4.96 7.50 B1 B2 1MA74-2R2NF_ 2.20 ±30% 0.0130 0.0182 4.66 6.50 B1 B2 1MA74-3R3NF_ 3.30 ±30% 0.0183 0.0220 3.94 5.20 B1 B2 1MA74-4R7MF_ 4.70 ±20% 0.0254 0.0305 3.34 4.10 B1 B2 1MA74-5R6MF_ 5.60 ±20% 0.0350 0.0420 3.00 3.90 B1 B2 1MA74-6R8MF_ 6.80 ±20% 0.0418 0.0460 2.60 3.70 B1 B2 1MA74-8R2MF_ 8.20 ±20% 0.0441 0.0485 2.53 3.30 B1 B2 1MA74-100MF_ 10.0 ±20% 0.0450 0.0490 2.41 2.80 B1 B2 1MA74-120MF_ 12.0 ±20% 0.0500 0.0580 2.17 2.50 B1 B2 1MA74-150MF_ 15.0 ±20% 0.0637 0.0764 2.11 2.20 B1 B2 1MA74-180MF_ 18.0 ±20% 0.0835 0.0910 1.84 2.00 B1 B2 1MA74-220MF_ 22.0 ±20% 0.0925 0.1100 1.75 1.90 B1 B2 1MA74-270MF_ 27.0 ±20% 0.125 0.150 1.50 1.70 B1 B2 1MA74-330MF_ 33.0 ±20% 0.143 0.170 1.41 1.50 B1 B2 1MA74-390MF_ 39.0 ±20% 0.190 0.228 1.22 1.30 B1 B2 1MA74-470MF_ 47.0 ±20% 0.216 0.259 1.15 1.20 B1 B2 1MA74-560MF_ 56.0 ±20% 0.230 0.276 1.11 1.10 B1 B2 1MA74-680MF_ 68.0 ±20% 0.265 0.318 1.03 1.00 B1 B2 1MA74-820MF_ 82.0 ±20% 0.345 0.414 0.91 0.90 B1 B2 1MA74-101MF_ 100 ±20% 0.383 0.460 0.86 0.80 B1 B2 1MA74-121MF_ 120 ±20% 0.515 0.618 0.74 0.70 B1 B2 1MA74-151MF_ 150 ±20% 0.591 0.709 0.69 0.65 B1 B2 1MA74-181MF_ 180 ±20% 0.760 0.912 0.61 0.62 B1 B2 1MA74-221MF_ 220 ±20% 0.907 1.088 0.56 0.59 B1 B2 1MA74-271MF_ 270 ±20% 1.210 1.452 0.48 0.55 B1 B2 1MA74-331MF_ 330 ±20% 1.410 1.692 0.45 0.49 B1 B2 1MA74-391MF_ 390 ±20% 1.525 1.830 0.43 0.45 B1 B2 1MA74-471MF_ 470 ±20% 1.740 2.088 0.40 0.41 B1 B2 1MA74-561MF_ 560 ±20% 2.220 2.664 0.36 0.38 B1 B2 Accetek Electronics (Shenzhen) Co., Ltd. 4 DCR3 μH Part Number 1 www.accetek.com Catalog-Power Inductor-2015A 1MA Series Shielded Power Inductor– Low DCR Type Accetek Inductance2 DCR3 Drawing Fig. 1 μH Tolerance Typ.(Ω) Max.(Ω) Irms4(A) Isat5 (A) 1MA74-681MF_ 680 ±20% 2.580 3.096 0.33 0.36 B1 B2 1MA74-821MF_ 820 ±20% 2.930 3.516 0.31 0.30 B1 B2 1MA74-102MF_ 1000 ±20% 3.890 4.668 0.27 0.27 B1 B2 1MA124-R47NF_ 1MA124-1R0NF_ 0.47 1.00 ±30% ±30% 0.0045 0.0055 0.0055 0.0063 9.50 8.50 20.90 18.40 C1 C1 C2 C2 1MA124-1R5NF_ 1.50 ±30% 0.0087 0.0097 7.80 10.64 C1 C2 1MA124-2R7NF_ 2.70 ±30% 0.0103 0.0115 6.80 9.69 C1 C2 Part Number Metal Base Plastic Base 1MA124-3R3NF_ 3.30 ±30% 0.0115 0.0130 6.30 8.46 C1 C2 1MA124-4R7MF_ 4.70 ±20% 0.0135 0.0160 6.00 8.52 C1 C2 1MA124-6R8MF_ 6.80 ±20% 0.0210 0.0250 5.20 6.52 C1 C2 1MA124-8R2MF_ 8.20 ±20% 0.0275 0.0290 4.67 5.98 C1 C2 1MA124-100MF_ 10.0 ±20% 0.0268 0.0300 3.90 5.72 C1 C2 1MA124-120MF_ 12.0 ±20% 0.0369 0.0380 3.65 5.02 C1 C2 1MA124-150MF_ 15.0 ±20% 0.0486 0.0500 3.40 4.58 C1 C2 1MA124-180MF_ 18.0 ±20% 0.0510 0.0567 3.19 4.28 C1 C2 1MA124-220MF_ 22.0 ±20% 0.0603 0.0670 3.14 3.76 C1 C2 1MA124-270MF_ 27.0 ±20% 0.0675 0.0750 2.86 3.46 C1 C2 1MA124-330MF_ 33.0 ±20% 0.0817 0.0908 2.60 3.14 C1 C2 1MA124-390MF_ 39.0 ±20% 0.0952 0.1058 2.39 2.72 C1 C2 1MA124-470MF_ 47.0 ±20% 0.121 0.134 2.10 2.66 C1 C2 1MA124-560MF_ 56.0 ±20% 0.134 0.149 2.01 2.34 C1 C2 1MA124-680MF_ 68.0 ±20% 0.167 0.186 1.80 2.10 C1 C2 1MA124-820MF_ 82.0 ±20% 0.189 0.210 1.72 1.80 C1 C2 1MA124-101MF_ 100 ±20% 0.217 0.241 1.65 1.64 C1 C2 1MA124-121MF_ 120 ±20% 0.287 0.319 1.42 1.62 C1 C2 1MA124-151MF_ 150 ±20% 0.327 0.363 1.30 1.36 C1 C2 1MA124-181MF_ 180 ±20% 0.380 0.422 1.21 1.34 C1 C2 1MA124-221MF_ 220 ±20% 0.488 0.543 1.00 1.18 C1 C2 1MA124-271MF_ 270 ±20% 0.560 0.622 0.95 1.04 C1 C2 1MA124-331MF_ 330 ±20% 0.731 0.813 0.87 1.00 C1 C2 1MA124-391MF_ 390 ±20% 0.814 0.904 0.79 0.91 C1 C2 1MA124-471MF_ 470 ±20% 0.935 1.039 0.76 0.81 C1 C2 1MA124-561MF_ 560 ±20% 1.119 1.326 0.67 0.76 C1 C2 1MA124-681MF_ 680 ±20% 1.370 1.523 0.62 0.68 C1 C2 1MA124-821MF_ 820 ±20% 1.590 1.767 0.58 0.61 C1 C2 1MA124-102MF_ 1000 ±20% 2.090 2.323 0.50 0.56 C1 C2 1MA125-R47NF_ 1MA125-1R0NF_ 0.47 1.00 ±30% ±30% 0.0018 0.0024 0.0027 0.0036 17.60 13.18 25.00 16.50 D1 D1 D2 D2 1MA125-1R5NF_ 1.50 ±30% 0.0040 0.0060 10.21 14.40 D1 D2 1MA125-2R2NF_ 2.20 ±30% 0.0045 0.0063 9.96 11.70 D1 D2 1MA125-3R3NF_ 3.30 ±30% 0.0063 0.0076 9.09 10.40 D1 D2 1MA125-4R7MF_ 4.70 ±20% 0.0105 0.0126 7.04 8.72 D1 D2 1MA125-5R6MF_ 5.60 ±20% 0.0115 0.0150 6.45 7.26 D1 D2 1MA125-6R8MF_ 6.80 ±20% 0.0123 0.0180 5.59 7.12 D1 D2 1MA125-8R2MF_ 8.20 ±20% 0.0170 0.0210 5.54 6.75 D1 D2 1MA125-100MF_ 10.0 ±20% 0.0180 0.0250 5.11 5.87 D1 D2 1MA125-120MF_ 12.0 ±20% 0.0230 0.0270 4.81 4.92 D1 D2 1MA125-150MF_ 15.0 ±20% 0.0250 0.0300 4.56 4.56 D1 D2 1MA125-180MF_ 18.0 ±20% 0.0290 0.0340 4.29 4.35 D1 D2 1MA125-220MF_ 22.0 ±20% 0.0310 0.0360 4.17 3.86 D1 D2 1MA125-270MF_ 27.0 ±20% 0.0400 0.0510 3.50 3.34 D1 D2 1MA125-330MF_ 33.0 ±20% 0.0540 0.0570 3.31 3.06 D1 D2 1MA125-390MF_ 39.0 ±20% 0.0580 0.0645 3.11 2.93 D1 D2 1MA125-470MF_ 47.0 ±20% 0.0750 0.0820 2.71 2.53 D1 D2 1MA125-560MF_ 56.0 ±20% 0.0850 0.0890 2.65 2.39 D1 D2 1MA125-680MF_ 68.0 ±20% 0.0945 0.1050 2.44 2.30 D1 D2 1MA125-820MF_ 82.0 ±20% 0.120 0.129 2.20 2.05 D1 D2 Accetek Electronics (Shenzhen) Co., Ltd. www.accetek.com Catalog-Power Inductor-2015A 5 1MA Series Shielded Power Inductor– Low DCR Type Accetek Inductance2 Drawing Fig. Tolerance Typ.(Ω) Max.(Ω) Irms4(A) Isat5 (A) 1MA125-101MF_ 100 ±20% 0.139 0.146 2.07 1.79 D1 D2 1MA125-121MF_ 120 ±20% 0.159 0.170 1.92 1.62 D1 D2 1MA125-151MF_ 150 ±20% 0.185 0.230 1.65 1.50 D1 D2 1MA125-181MF_ 180 ±20% 0.234 0.246 1.59 1.33 D1 D2 1MA125-221MF_ 220 ±20% 0.306 0.335 1.37 1.22 D1 D2 1MA125-271MF_ 270 ±20% 0.355 0.400 1.25 1.05 D1 D2 1MA125-331MF_ 330 ±20% 0.482 0.494 1.12 0.95 D1 D2 Metal Base Plastic Base 1MA125-391MF_ 390 ±20% 0.515 0.533 1.08 0.88 D1 D2 1MA125-471MF_ 470 ±20% 0.705 0.733 0.92 0.83 D1 D2 1MA125-561MF_ 560 ±20% 0.776 0.800 0.88 0.77 D1 D2 1MA125-681MF_ 680 ±20% 0.887 0.910 0.83 0.70 D1 D2 1MA125-821MF_ 820 ±20% 1.130 1.152 0.74 0.63 D1 D2 1MA125-102MF_ 1000 ±20% 1.295 1.335 0.68 0.57 D1 D2 1MA127-R47NF_ 1MA127-1R0NF_ 0.47 1.00 ±30% ±30% 0.00195 0.00261 0.00300 0.00450 17.90 15.50 26.40 18.60 E1 E1 E2 E2 1MA127-1R5NF_ 1.50 ±30% 0.00341 0.00600 13.50 15.00 E1 E2 1MA127-2R2NF_ 2.20 ±30% 0.00400 0.00680 12.70 14.30 E1 E2 1MA127-3R3NF_ 3.30 ±30% 0.00680 0.00816 10.40 12.50 E1 E2 1MA127-3R9NF_ 3.90 ±30% 0.00850 0.01020 8.77 10.56 E1 E2 1MA127-4R7MF_ 4.70 ±20% 0.00940 0.01128 8.25 10.23 E1 E2 1MA127-5R6MF_ 5.60 ±20% 0.0108 0.0130 7.47 9.46 E1 E2 1MA127-6R8MF_ 6.80 ±20% 0.0120 0.0144 7.34 8.80 E1 E2 1MA127-8R2MF_ 8.20 ±20% 0.0160 0.0192 6.32 8.25 E1 E2 1MA127-100MF_ 10.0 ±20% 0.0172 0.0200 6.04 7.26 E1 E2 1MA127-120MF_ 12.0 ±20% 0.0218 0.0240 5.37 6.50 E1 E2 1MA127-150MF_ 15.0 ±20% 0.0240 0.0270 5.04 6.00 E1 E2 1MA127-180MF_ 18.0 ±20% 0.0308 0.0370 4.52 5.40 E1 E2 1MA127-220MF_ 22.0 ±20% 0.0330 0.0396 4.21 5.00 E1 E2 1MA127-270MF_ 27.0 ±20% 0.0350 0.0420 3.74 3.80 E1 E2 1MA127-330MF_ 33.0 ±20% 0.0470 0.0564 3.58 3.70 E1 E2 1MA127-390MF_ 39.0 ±20% 0.0530 0.0636 3.35 3.60 E1 E2 1MA127-470MF_ 47.0 ±20% 0.0719 0.0863 2.96 3.45 E1 E2 1MA127-560MF_ 56.0 ±20% 0.0802 0.0962 2.80 2.90 E1 E2 1MA127-680MF_ 68.0 ±20% 0.0900 0.1080 2.62 2.70 E1 E2 1MA127-820MF_ 82.0 ±20% 0.120 0.144 2.23 2.50 E1 E2 1MA127-101MF_ 100 ±20% 0.135 0.162 2.16 2.40 E1 E2 1MA127-121MF_ 120 ±20% 0.182 0.218 1.86 2.00 E1 E2 1MA127-151MF_ 150 ±20% 0.216 0.259 1.71 1.80 E1 E2 1MA127-181MF_ 180 ±20% 0.229 0.275 1.66 1.70 E1 E2 1MA127-221MF_ 220 ±20% 0.323 0.388 1.39 1.50 E1 E2 1MA127-271MF_ 270 ±20% 0.415 0.498 1.23 1.30 E1 E2 1MA127-331MF_ 330 ±20% 0.487 0.584 1.14 1.20 E1 E2 1MA127-391MF_ 390 ±20% 0.533 0.640 1.09 1.10 E1 E2 1MA127-471MF_ 470 ±20% 0.707 0.848 0.94 1.00 E1 E2 1MA127-561MF_ 560 ±20% 0.777 0.932 0.90 0.90 E1 E2 1MA127-681MF_ 680 ±20% 1.045 1.254 0.78 0.80 E1 E2 1MA127-821MF_ 820 ±20% 1.166 1.399 0.73 0.80 E1 E2 1MA127-102MF_ 1000 ±20% 1.334 1.601 0.69 0.70 E1 E2 1MA129-R47NF_ 1MA129-1R0NF_ 0.47 1.00 ±30% ±30% 0.0022 0.0034 0.0033 0.0051 17.50 14.00 27.50 25.00 F1 F1 F2 F2 1MA129-2R2NF_ 2.20 ±30% 0.0050 0.0060 11.50 20.00 F1 F2 1MA129-3R5NF_ 3.50 ±30% 0.0060 0.0090 11.00 16.50 F1 F2 1MA129-4R7MF_ 4.70 ±20% 0.0070 0.0110 9.30 13.00 F1 F2 1MA129-6R8MF_ 6.80 ±20% 0.0090 0.0140 8.40 12.80 F1 F2 1MA129-7R5MF_ 7.50 ±20% 0.0110 0.0150 7.80 10.60 F1 F2 1MA129-100MF_ 10.0 ±20% 0.0130 0.0180 7.60 10.50 F1 F2 1MA129-120MF_ 12.0 ±20% 0.0150 0.0190 7.10 8.80 F1 F2 Accetek Electronics (Shenzhen) Co., Ltd. 6 DCR3 μH Part Number 1 www.accetek.com Catalog-Power Inductor-2015A 1MA Series Shielded Power Inductor– Low DCR Type Accetek Inductance2 DCR3 Drawing Fig. μH Tolerance Typ.(Ω) Max.(Ω) Irms4(A) Isat5 (A) 1MA129-150MF_ 15.0 ±20% 0.0210 0.0260 6.00 8.00 F1 F2 1MA129-220MF_ 22.0 ±20% 0.0230 0.0280 5.30 6.50 F1 F2 1MA129-270MF_ 27.0 ±20% 0.0300 0.0400 4.60 5.80 F1 F2 1MA129-330MF_ 33.0 ±20% 0.0370 0.0450 4.20 5.50 F1 F2 1MA129-390MF_ 39.0 ±20% 0.0440 0.0560 4.10 5.00 F1 F2 1MA129-470MF_ 47.0 ±20% 0.0460 0.0630 3.80 4.50 F1 F2 1MA129-560MF_ 56.0 ±20% 0.0540 0.0680 3.40 3.70 F1 F2 Part Number 1 Metal Base Plastic Base 1MA129-680MF_ 68.0 ±20% 0.0690 0.0890 3.20 3.60 F1 F2 1MA129-820MF_ 82.0 ±20% 0.0905 0.1050 2.70 3.40 F1 F2 1MA129-101MF_ 100 ±20% 0.100 0.110 2.50 3.10 F1 F2 1MA129-121MF_ 120 ±20% 0.130 0.156 2.30 2.60 F1 F2 1MA129-151MF_ 150 ±20% 0.139 0.174 2.30 2.40 F1 F2 1MA129-181MF_ 180 ±20% 0.153 0.191 2.20 2.30 F1 F2 1MA129-221MF_ 220 ±20% 0.193 0.300 1.90 2.20 F1 F2 1MA129-271MF_ 270 ±20% 0.248 0.330 1.70 2.10 F1 F2 1MA129-331MF_ 330 ±20% 0.363 0.430 1.50 1.70 F1 F2 1MA129-471MF_ 470 ±20% 0.437 0.560 1.40 1.50 F1 F2 1MA129-561MF_ 560 ±20% 0.520 0.650 1.20 1.40 F1 F2 1MA129-681MF_ 680 ±20% 0.660 0.825 1.10 1.30 F1 F2 1MA129-821MF_ 820 ±20% 0.815 1.000 1.00 1.10 F1 F2 1MA129-102MF_ 1000 ±20% 0.930 1.200 0.88 1.00 F1 F2 1MA129-122MF_ 1200 ±20% 1.110 1.330 0.80 0.81 F1 F2 1MA129-152MF_ 1500 ±20% 1.660 1.990 0.66 0.71 F1 F2 1MA129-182MF_ 1800 ±20% 1.820 2.180 0.63 0.60 F1 F2 1MA129-222MF_ 2200 ±20% 2.150 2.580 0.58 0.54 F1 F2 1. Available for both Plastic Base and Metal Base, when ordering please specify the base type codes: e.g. 1MA127-1R0NFP P= Plastic Base M= Metal Base 2. Inductance measured @ 100KHz, 0.3V at 25°C temperature. 3. DCR measured @ 25°C. 4. Irms: DC current for an approximate 40°C rise from 20°C ambient temperature. 5. Isat: DC current for approximate 10% L roll off at 25°C. 6. Specifications subject to change without notice please check our website for latest information. E TAPE AND REEL SPECIFICATIONS D P0 P B W H 220 A C P1 T E Case Size Parts per Reel Reel Dimensions(REF) Tape Dimensions(REF) A B C D E W P P0 P1 H T 330 100 13 22.5 16.5 16 12 4 2 3.8 0.4 1MA73 1000 1MA74 1000 330 100 13 22.5 16.5 16 12 4 2 4.8 0.4 1MA124 500 330 100 13 30 24.5 24 16 4 2 4.9 0.45 1MA125 500 330 100 13 30 24.5 24 16 4 2 6.2 0.45 1MA127 500 330 100 13 30 24.5 24 16 4 2 8.2 0.45 1MA129 350 330 100 13 30 24.5 24 16 4 2 10.2 0.45 Accetek Electronics (Shenzhen) Co., Ltd. www.accetek.com Catalog-Power Inductor-2015A 7 1MB Series Shielded Power Inductor– Low Cost Type Accetek A FEATURES Shielded Construction with low DCR Low cost version of 1MA series 260°C reflow peak temperature qualified Operating Temperature range from -40°C to +105°C (Including Self-heating) B PART NUMBER SYSTEM 1MB 125 ❶ ❷ - 100 M F ❸ ❹ ❺ ❶ Series 1MB Series Code ❸ Inductance Code e.g. Calculation 2R2 2.2μH 100 10×100μH = 10μH 73 (7.6×7.6×3.55) 125 (12.5×12.5×6.0) 74 (7.6×7.6×4.6) 127 (12.5×12.5×8.0) 124 (12.5×12.5×5.0) RoHS Compliant ❺ 1 101 10×10 μH = 100μH ❹ Inductance Tolerance K ±10% M ±20% N ±30% C Dimension Code (L*W*H) (mm) ❷ DRAWINGS AND DIMENSIONS 1MB73 7.60 Max [0,299] 2 1MB74 8.00 [0,315] XXX 1 1 2.00 [0,079] 2 2,20 [0,087] 1,60 8.00 [0,315] 7.60 Max [0,299] 2 XXX 1 1 2.00 [0,079] 2 [0,063] 7.60 Max [0.299] 3.55 Max [0,140] [0,063] Land Pattern 1.13 [0,044] 7.60 Max [0.299] 4.60 Max Land Pattern 1.13 [0,044] [0,181] 1MB124 1MB125 13,80 [0,543] 13,80 [0,543] 12,50 Max 2 [0,492] XXX 1 1 12,50 Max [0,492] 2 4,90 Typ [0,193] 3,85 [0,152] 2,05 Typ [0,081] 4,50 Max [0,177] 12,50 Max 2 [0,492] 5,50 [0,217] Land Pattern XXX 12,50 Max [0,492] 1MB127 XXX 12,50 Max [0,492] 1 1 2 8.00 Max [0,315] Accetek Electronics (Shenzhen) Co., Ltd. 8 1 1 2 4,90 Typ [0,193] 2,05 Typ [0,081] 6.00 Max [0,236] 5,50 [0,217] 3,85 [0,152] Land Pattern Schematics 13,80 [0,543] 12,50 Max 2 [0,492] 2,20 [0,087] 1,60 4,90 Typ [0,193] 2,05 Typ [0,081] 1 5,50 [0,217] 3,85 [0,152] 2 Land Pattern www.accetek.com Catalog-Power Inductor-2015A 1MB Series Shielded Power Inductor– Low Cost Type Accetek D SPECIFICATIONS Inductance DCR Part Number μH Tolerance Test Condition Max.(Ω) Ir 1MB73-2R2NF 2.2 ±30% 100KHz, 0.3V 0.025 5.52 1MB73-3R3NF 3.3 ±30% 100KHz, 0.3V 0.035 4.22 1MB73-4R7NF 4.7 ±30% 100KHz, 0.3V 0.031 3.00 1MB73-100MF 10 ±20% 1KHz, 0.3V 0.072 1.68 1MB73-120MF 12 ±20% 1KHz, 0.3V 0.098 1.52 1MB73-150MF 15 ±20% 1KHz, 0.3V 0.130 1.33 1MB73-180MF 18 ±20% 1KHz, 0.3V 0.140 1.20 1MB73-220MF 22 ±20% 1KHz, 0.3V 0.190 1.07 1MB73-270MF 27 ±20% 1KHz, 0.3V 0.210 0.96 1MB73-330MF 33 ±20% 1KHz, 0.3V 0.240 0.91 1MB73-390MF 39 ±20% 1KHz, 0.3V 0.320 0.77 1MB73-470MF 47 ±20% 1KHz, 0.3V 0.360 0.76 1MB73-560MF 56 ±20% 1KHz, 0.3V 0.470 0.68 1MB73-680MF 68 ±20% 1KHz, 0.3V 0.520 0.61 1MB73-820MF 82 ±20% 1KHz, 0.3V 0.690 0.57 1MB73-101MF 100 ±20% 1KHz, 0.3V 0.790 0.50 1MB73-121MF 120 ±20% 1KHz, 0.3V 0.890 0.49 1MB73-151MF 150 ±20% 1KHz, 0.3V 1.270 0.43 1MB73-181MF 180 ±20% 1KHz, 0.3V 1.450 0.39 1MB73-221MF 220 ±20% 1KHz, 0.3V 1.650 0.35 1MB73-271MF 270 ±20% 1KHz, 0.3V 2.310 0.32 1MB73-331MF 330 ±20% 1KHz, 0.3V 2.620 0.28 1MB73-391MF 390 ±20% 1KHz, 0.3V 2.940 0.26 1MB73-471MF 470 ±20% 1KHz, 0.3V 4.180 0.24 1MB73-561MF 560 ±20% 1KHz, 0.3V 4.670 0.22 1MB73-681MF 680 ±20% 1KHz, 0.3V 5.730 0.19 1MB73-821MF 820 ±20% 1KHz, 0.3V 6.540 0.18 1MB73-102MF 1000 ±20% 1KHz, 0.3V 9.440 0.16 1MB74-100MF 1MB74-120MF 10 12 ±20% ±20% 1KHz, 0.3V 1KHz, 0.3V 0.049 0.058 1.84 1.71 1MB74-150MF 15 ±20% 1KHz, 0.3V 0.081 1.47 1MB74-180MF 18 ±20% 1KHz, 0.3V 0.091 1.31 1MB74-220MF 22 ±20% 1KHz, 0.3V 0.110 1.23 1MB74-270MF 27 ±20% 1KHz, 0.3V 0.150 1.12 1MB74-330MF 33 ±20% 1KHz, 0.3V 0.170 0.96 1MB74-390MF 39 ±20% 1KHz, 0.3V 0.230 0.91 1MB74-470MF 47 ±20% 1KHz, 0.3V 0.260 0.88 1MB74-560MF 56 ±20% 1KHz, 0.3V 0.350 0.75 1MB74-680MF 68 ±20% 1KHz, 0.3V 0.380 0.69 1MB74-820MF 82 ±20% 1KHz, 0.3V 0.430 0.61 1MB74-101MF 100 ±20% 1KHz, 0.3V 0.610 0.60 1MB74-121MF 120 ±20% 1KHz, 0.3V 0.660 0.52 1MB74-151MF 150 ±20% 1KHz, 0.3V 0.880 0.46 1MB74-181MF 180 ±20% 1KHz, 0.3V 0.980 0.42 1MB74-221MF 220 ±20% 1KHz, 0.3V 1.170 0.36 1MB74-271MF 270 ±20% 1KHz, 0.3V 1.640 0.34 1MB74-331MF 330 ±20% 1KHz, 0.3V 1.860 0.32 1MB74-391MF 390 ±20% 1KHz, 0.3V 2.850 0.29 1MB74-471MF 470 ±20% 1KHz, 0.3V 3.010 0.26 1MB74-561MF 560 ±20% 1KHz, 0.3V 3.620 0.23 1MB74-681MF 680 ±20% 1KHz, 0.3V 4.630 0.22 1MB74-821MF 820 ±20% 1KHz, 0.3V 5.200 0.20 1MB74-102MF 1000 ±20% 1KHz, 0.3V 6.000 0.18 1MB124-1R0NF 1.0 ±30% 100KHz, 0.3V 0.010 8.00 Accetek Electronics (Shenzhen) Co., Ltd. www.accetek.com Catalog-Power Inductor-2015A 9 1MB Series Shielded Power Inductor– Low Cost Type Accetek Inductance DCR Part Number μH Tolerance Test Condition Max.(Ω) Ir 1MB124-2R2NF 2.2 ±30% 100KHz, 0.3V 0.014 4.90 1MB124-3R3NF 3.3 ±30% 100KHz, 0.3V 0.015 4.50 1MB124-4R7NF 4.7 ±30% 100KHz, 0.3V 0.018 5.70 1MB124-5R6NF 5.6 ±30% 100KHz, 0.3V 0.020 5.20 1MB124-6R8NF 6.8 ±30% 100KHz, 0.3V 0.023 4.90 1MB124-8R2NF 8.2 ±30% 100KHz, 0.3V 0.026 4.60 1MB124-100MF 10 ±20% 1KHz, 0.3V 0.028 4.50 1MB124-120MF 12 ±20% 1KHz, 0.3V 0.038 4.00 1MB124-150MF 15 ±20% 1KHz, 0.3V 0.050 3.20 1MB124-180MF 18 ±20% 1KHz, 0.3V 0.057 3.10 1MB124-220MF 22 ±20% 1KHz, 0.3V 0.066 2.90 1MB124-270MF 27 ±20% 1KHz, 0.3V 0.080 2.80 1MB124-330MF 33 ±20% 1KHz, 0.3V 0.097 2.70 1MB124-390MF 39 ±20% 1KHz, 0.3V 0.132 2.10 1MB124-470MF 47 ±20% 1KHz, 0.3V 0.160 1.90 1MB124-560MF 56 ±20% 1KHz, 0.3V 0.190 1.80 1MB124-680MF 68 ±20% 1KHz, 0.3V 0.220 1.50 1MB124-820MF 82 ±20% 1KHz, 0.3V 0.260 1.30 1MB124-101MF 100 ±20% 1KHz, 0.3V 0.310 1.20 1MB124-121MF 120 ±20% 1KHz, 0.3V 0.380 1.10 1MB124-151MF 150 ±20% 1KHz, 0.3V 0.530 0.95 1MB124-181MF 180 ±20% 1KHz, 0.3V 0.620 0.85 1MB124-221MF 220 ±20% 1KHz, 0.3V 0.700 0.80 1MB124-271MF 270 ±20% 1KHz, 0.3V 0.870 0.60 1MB124-331MF 330 ±20% 1KHz, 0.3V 0.990 0.50 1MB125-1R0NF 1MB125-2R2NF 1.0 2.2 ±30% ±30% 100KHz, 0.3V 100KHz, 0.3V 0.010 0.014 8.00 7.80 1MB125-3R3NF 3.3 ±30% 100KHz, 0.3V 0.014 8.00 1MB125-8R2NF 8.2 ±30% 100KHz, 0.3V 0.021 4.40 1MB125-100MF 10 ±20% 1KHz, 0.3V 0.025 4.00 1MB125-120MF 12 ±20% 1KHz, 0.3V 0.027 3.50 1MB125-150MF 15 ±20% 1KHz, 0.3V 0.030 3.30 1MB125-180MF 18 ±20% 1KHz, 0.3V 0.034 3.00 1MB125-220MF 22 ±20% 1KHz, 0.3V 0.036 2.80 1MB125-270MF 27 ±20% 1KHz, 0.3V 0.051 2.30 1MB125-330MF 33 ±20% 1KHz, 0.3V 0.057 2.10 1MB125-390MF 39 ±20% 1KHz, 0.3V 0.068 2.00 1MB125-470MF 47 ±20% 1KHz, 0.3V 0.075 1.80 1MB125-560MF 56 ±20% 1KHz, 0.3V 0.110 1.70 1MB125-680MF 68 ±20% 1KHz, 0.3V 0.120 1.50 1MB125-820MF 82 ±20% 1KHz, 0.3V 0.140 1.40 1MB125-101MF 100 ±20% 1KHz, 0.3V 0.160 1.30 1MB125-121MF 120 ±20% 1KHz, 0.3V 0.170 1.10 1MB125-151MF 150 ±20% 1KHz, 0.3V 0.230 1.00 1MB125-181MF 180 ±20% 1KHz, 0.3V 0.290 0.90 1MB125-221MF 220 ±20% 1KHz, 0.3V 0.400 0.80 1MB125-271MF 270 ±20% 1KHz, 0.3V 0.460 0.75 1MB125-331MF 330 ±20% 1KHz, 0.3V 0.510 0.68 1MB125-391MF 390 ±20% 1KHz, 0.3V 0.690 0.65 1MB125-471MF 470 ±20% 1KHz, 0.3V 0.770 0.58 1MB125-561MF 560 ±20% 1KHz, 0.3V 0.860 0.54 1MB125-681MF 680 ±20% 1KHz, 0.3V 1.200 0.48 1MB127-1R0NF 1MB127-2R2NF 1.0 2.2 ±30% ±30% 100KHz, 0.3V 100KHz, 0.3V 0.006 0.012 12.00 8.00 1MB127-3R3NF 3.3 ±30% 100KHz, 0.3V 0.013 8.00 1MB127-4R7NF 4.7 ±30% 100KHz, 0.3V 0.016 6.80 1MB127-6R8NF 6.8 ±30% 100KHz, 0.3V 0.019 6.60 Accetek Electronics (Shenzhen) Co., Ltd. 10 www.accetek.com Catalog-Power Inductor-2015A 1MB Series Shielded Power Inductor– Low Cost Type Accetek Inductance DCR Part Number μH Tolerance Test Condition Max.(Ω) Ir 1MB127-8R2NF 8.2 ±30% 100KHz, 0.3V 0.020 5.60 1MB127-100MF 10 ±20% 1KHz, 0.3V 0.021 5.40 1MB127-120MF 12 ±20% 1KHz, 0.3V 0.024 4.90 1MB127-150MF 15 ±20% 1KHz, 0.3V 0.027 4.50 1MB127-180MF 18 ±20% 1KHz, 0.3V 0.039 3.90 1MB127-220MF 22 ±20% 1KHz, 0.3V 0.043 3.60 1MB127-270MF 27 ±20% 1KHz, 0.3V 0.046 3.40 1MB127-330MF 33 ±20% 1KHz, 0.3V 0.065 3.00 1MB127-390MF 39 ±20% 1KHz, 0.3V 0.073 2.75 1MB127-470MF 47 ±20% 1KHz, 0.3V 0.100 2.50 1MB127-560MF 56 ±20% 1KHz, 0.3V 0.110 2.35 1MB127-680MF 68 ±20% 1KHz, 0.3V 0.140 2.10 1MB127-820MF 82 ±20% 1KHz, 0.3V 0.160 1.95 1MB127-101MF 100 ±20% 1KHz, 0.3V 0.220 1.70 1MB127-121MF 120 ±20% 1KHz, 0.3V 0.250 1.60 1MB127-151MF 150 ±20% 1KHz, 0.3V 0.280 1.42 1MB127-181MF 180 ±20% 1KHz, 0.3V 0.350 1.30 1MB127-221MF 220 ±20% 1KHz, 0.3V 0.390 1.16 1MB127-271MF 270 ±20% 1KHz, 0.3V 0.560 1.06 1MB127-331MF 330 ±20% 1KHz, 0.3V 0.640 0.95 1MB127-391MF 390 ±20% 1KHz, 0.3V 0.700 0.88 1MB127-471MF 470 ±20% 1KHz, 0.3V 0.980 0.79 1MB127-561MF 560 ±20% 1KHz, 0.3V 1.070 0.73 1MB127-681MF 680 ±20% 1KHz, 0.3V 1.460 0.67 1MB127-821MF 820 ±20% 1KHz, 0.3V 1.640 0.60 1MB127-102MF 1000 ±20% 1KHz, 0.3V 1.820 0.55 1. DCR measured @ 25°C. 2. IRated=Min(Irms,Isat); Irms based on 40℃ rise from 20°C ambient, Isat based on 25% inductance drop. 3. Specifications subject to change without notice please check our website for latest information. E TAPE AND REEL SPECIFICATIONS D P0 P B W H 220 A C P1 T E Case Size Parts per Reel Reel Dimensions(REF) Tape Dimensions(REF) A B C D E W P P0 P1 H T 1MB73 1000 330 100 13 22.5 16.5 16 12 4 2 3.8 0.4 1MB74 1000 330 100 13 22.5 16.5 16 12 4 2 4.7 0.4 1MB124 500 330 100 13 30 24.5 24 16 4 2 4.9 0.45 1MB125 500 330 100 13 30 24.5 24 16 4 2 6.2 0.45 1MB127 500 330 100 13 30 24.5 24 16 4 2 8.2 0.45 Accetek Electronics (Shenzhen) Co., Ltd. www.accetek.com Catalog-Power Inductor-2015A 11 1MC Series Unshielded Power Inductor Accetek A FEATURES Saturation current rating up to 15.3 Amps Inductance ratings from 0.8 to 1000 µH Widely applications, highly recommend to use for switching regulators Operating Temperature range from -40°C to +125°C (Including Self-heating) 260°C reflow peak temperature qualified B PART NUMBER SYSTEM 1MC 105 ❶ ❷ - 100 M F ❸ ❹ ❺ ❶ Series 1MC Series Code Dimension Code (L*W*H) (mm) ❷ 43 (4.0×4.5×3.2) 54 (5.2×5.8×4.5) 75 (7.0×7.8×5.0) 105 (9.0×10.0×5.4) ❸ Inductance Code e.g. Calculation ❹ Inductance Tolerance 2R2 2.2μH K ±10% 100 0 L ±15% M ±20% 10×10 μH = 10μH 1 101 ❺ C 10×10 μH = 100μH RoHS Compliant DRAWINGS AND DIMENSIONS Drawing A Schematic I I C XXX 1 H B G 2 XXX = Inductance value Case Size Dimensions A B C Iref. Gref. 1MC31 3.5±0.2 3.0±0.2 1.6±0.3 1.6 0.8 3.5 1MC32 3.5±0.2 3.0±0.2 2.1±0.3 1.6 0.8 3.5 1MC43 4.5±0.3 4.0±0.3 3.2±0.3 1.75 1.5 5.0 6.0 1MC54 5.8±0.3 5.2±0.3 4.5±0.3 2.15 1.7 1MC75 7.8±0.3 7.0±0.3 5.0±0.5 3.00 2.0 8.0 1MC105 10.0±0.4 9.0±0.4 5.4±0.5 3.75 2.5 10.0 Accetek Electronics (Shenzhen) Co., Ltd. 12 Href. www.accetek.com Catalog-Power Inductor-2015A 1MC Series Unshielded Power Inductor Accetek D SPECIFICATIONS Inductance1 Part Number μH 1MC31-1R0MF 1.0 1MC31-1R5MF 1.5 1MC31-2R2MF DCR2 Tolerance Irms3(A) Isat4(A) Typ.(Ω) Max.(Ω) ±20% 0.048 0.058 1.60 ±20% 0.065 0.078 1.55 2.17 2.2 ±20% 0.083 0.100 1.47 1.91 1MC31-3R3MF 3.3 ±20% 0.105 0.126 1.34 1.61 1MC31-3R9MF 3.9 ±20% 0.117 0.140 1.24 1.36 1MC31-4R7MF 4.7 ±20% 0.132 0.158 1.22 1.34 1MC31-5R6MF 5.6 ±20% 0.155 0.186 1.09 1.20 1MC31-6R8MF 6.8 ±20% 0.178 0.213 0.96 1.06 1MC31-8R2MF 8.2 ±20% 0.198 0.238 0.84 0.92 1MC31-100MF 10 ±20% 0.256 0.307 0.70 0.77 1MC32-1R0MF 1MC32-2R2MF 1.0 2.2 ±20% ±20% 0.040 0.060 0.048 0.072 1.75 1.68 2.45 2.18 1MC32-3R3MF 3.3 ±20% 0.090 0.108 1.58 1.90 1MC32-4R7MF 4.7 ±20% 0.143 0.172 1.50 1.65 1MC32-5R6MF 5.6 ±20% 0.160 0.192 1.36 1.50 1MC32-6R8MF 6.8 ±20% 0.183 0.219 1.22 1.34 1MC32-8R2MF 8.2 ±20% 0.206 0.247 1.09 1.20 1MC32-100MF 10 ±20% 0.238 0.286 0.95 1.05 1MC32-120MF 12 ±20% 0.271 0.325 0.88 0.97 1MC32-150MF 15 ±20% 0.390 0.468 0.82 0.90 1MC32-180MF 18 ±20% 0.455 0.546 0.76 0.84 1MC43-1R0MF 1MC43-1R4MF 1.0 1.4 ±20% ±20% 0.014 0.022 0.049 0.056 4.00 3.40 5.72 5.04 1MC43-1R8MF 1.8 ±20% 0.028 0.064 2.70 3.60 1MC43-2R2MF 2.2 ±20% 0.034 0.071 2.50 3.38 1MC43-2R7MF 2.7 ±20% 0.039 0.079 2.25 2.97 1MC43-3R3MF 3.3 ±20% 0.041 0.086 2.00 2.88 1MC43-3R9MF 3.9 ±20% 0.054 0.094 1.88 2.57 1MC43-4R7MF 4.7 ±20% 0.059 0.110 1.82 2.46 1MC43-5R6MF 5.6 ±20% 0.069 0.126 1.58 2.43 1MC43-6R8MF 6.8 ±20% 0.076 0.131 1.54 2.10 1MC43-8R2MF 8.2 ±20% 0.116 0.146 1.50 1.80 1MC43-100MF 10 ±20% 0.118 0.182 1.45 1.74 1MC43-120MF 12 ±20% 0.156 0.210 1.28 1.62 1MC43-150MF 15 ±20% 0.204 0.235 1.20 1.46 1MC43-180MF 18 ±20% 0.225 0.338 1.10 1.29 1MC43-220MF 22 ±20% 0.261 0.370 1.00 1.22 1MC43-270KF 27 ±10% 0.328 0.522 0.94 1.00 1MC43-330KF 33 ±10% 0.370 0.540 0.86 0.90 1MC43-390KF 39 ±10% 0.418 0.870 0.77 0.87 1MC43-470KF 47 ±10% 0.523 0.844 0.68 0.77 1MC43-560KF 56 ±10% 0.714 0.937 0.64 0.75 1MC43-680KF 68 ±10% 0.754 1.117 0.56 0.68 0.60 2.24 1MC43-820KF 82 ±10% 1.003 1.180 0.43 1MC43-101KF 100 ±10% 1.012 1.190 0.41 0.58 1MC54-R33MF 1MC54-2R2MF 0.33 2.2 ±20% ±20% 0.0060 0.0260 0.0080 0.0410 10.80 4.60 15.30 8.20 1MC54-2R7MF 2.7 ±20% 0.0320 0.045 4.00 8.00 1MC54-3R3MF 3.3 ±20% 0.042 0.060 4.00 7.50 1MC54-4R7MF 4.7 ±20% 0.056 0.071 3.00 5.50 1MC54-6R8MF 6.8 ±20% 0.071 0.082 2.40 5.00 1MC54-100MF 10 ±20% 0.078 0.100 2.20 2.50 1MC54-120MF 12 ±20% 0.082 0.110 2.00 1.94 1MC54-150MF 15 ±20% 0.089 0.140 1.53 1.90 Accetek Electronics (Shenzhen) Co., Ltd. www.accetek.com Catalog-Power Inductor-2015A 13 1MC Series Unshielded Power Inductor Accetek Inductance1 DCR2 Tolerance Typ.(Ω) Max.(Ω) Irms3(A) Isat4(A) Part Number μH 1MC54-180MF 18 ±20% 0.104 0.150 1.45 1.69 1MC54-220MF 22 ±20% 0.109 0.180 1.28 1.53 1MC54-270MF 27 ±20% 0.133 0.200 1.19 1.40 1MC54-330LF 33 ±15% 0.150 0.230 1.09 1.17 1MC54-390LF 39 ±15% 0.215 0.320 0.94 1.10 1MC54-470LF 47 ±15% 0.260 0.370 0.86 1.00 1MC54-560KF 56 ±10% 0.298 0.420 0.77 0.90 1MC54-680KF 68 ±10% 0.313 0.460 0.64 0.86 1MC54-820KF 82 ±10% 0.475 0.600 0.60 0.72 1MC54-101KF 100 ±10% 0.510 0.650 0.57 0.68 1MC54-121KF 120 ±10% 0.660 0.930 0.49 0.63 1MC54-151KF 150 ±10% 0.720 1.100 0.46 0.54 1MC54-181KF 180 ±10% 0.850 1.380 0.42 0.50 1MC54-221KF 220 ±10% 0.945 1.570 0.42 0.47 1MC54-102KF 1000 ±10% 4.5 4.800 0.21 0.20 1MC75-2R2MF 1MC75-3R3MF 2.2 3.3 ±20% ±20% 0.0080 0.0120 0.0150 0.0180 6.00 4.90 6.00 4.90 1MC75-4R7MF 4.7 ±20% 0.0160 0.0190 4.50 4.50 1MC75-5R6MF 5.6 ±20% 0.0180 0.0220 4.00 4.00 1MC75-6R8MF 6.8 ±20% 0.0220 0.0260 3.70 3.80 1MC75-8R2MF 8.2 ±20% 0.029 0.040 3.20 3.20 1MC75-100KF 10 ±10% 0.044 0.070 2.30 2.95 1MC75-120KF 12 ±10% 0.042 0.080 2.18 2.20 1MC75-150KF 15 ±10% 0.044 0.090 1.93 2.23 1MC75-180KF 18 ±10% 0.053 0.100 1.89 2.14 1MC75-220KF 22 ±10% 0.065 0.110 1.76 1.81 1MC75-270KF 27 ±10% 0.074 0.120 1.48 1.62 1MC75-330KF 33 ±10% 0.088 0.130 1.35 1.47 1MC75-390KF 39 ±10% 0.116 0.160 1.25 1.33 1MC75-470KF 47 ±10% 0.134 0.180 1.18 1.24 1MC75-560KF 56 ±10% 0.189 0.240 1.04 1.14 1MC75-680KF 68 ±10% 0.218 0.280 0.99 1.05 1MC75-820KF 82 ±10% 0.248 0.370 0.90 0.95 1MC75-101KF 100 ±10% 0.208 0.430 0.77 0.86 1MC75-121KF 120 ±10% 0.308 0.470 0.67 0.81 1MC75-151KF 150 ±10% 0.467 0.640 0.60 0.71 1MC75-181KF 180 ±10% 0.574 0.710 0.55 0.57 1MC75-221KF 220 ±10% 0.614 0.960 0.51 0.56 1MC75-271KF 270 ±10% 0.699 1.110 0.47 0.51 1MC75-331KF 330 ±10% 0.810 1.260 0.43 0.48 1MC75-391KF 390 ±10% 1.151 1.770 0.38 0.43 1MC75-471KF 470 ±10% 1.370 1.960 0.36 0.38 1MC105-1R2MF 1MC105-2R2MF 1.2 2.2 ±20% ±20% 0.004 0.007 0.006 0.010 7.40 7.00 11.00 8.00 1MC105-3R3MF 3.3 ±20% 0.009 0.015 6.00 7.00 1MC105-4R7MF 4.7 ±20% 0.012 0.017 5.00 6.00 1MC105-5R6MF 5.6 ±20% 0.015 0.019 4.80 4.50 1MC105-6R8MF 6.8 ±20% 0.016 0.022 4.40 5.00 1MC105-8R2MF 8.2 ±20% 0.020 0.026 4.20 4.25 1MC105-100MF 10 ±20% 0.028 0.060 2.98 3.24 1MC105-120MF 12 ±20% 0.033 0.070 2.72 3.15 1MC105-150MF 15 ±20% 0.034 0.080 2.47 2.88 1MC105-180MF 18 ±20% 0.043 0.090 2.36 2.43 1MC105-220MF 22 ±20% 0.051 0.100 2.04 2.07 1MC105-270MF 27 ±20% 0.063 0.110 1.95 1.98 1MC105-330MF 33 ±20% 0.083 0.120 1.78 1.89 1MC105-390MF 39 ±20% 0.098 0.140 1.62 1.8 Accetek Electronics (Shenzhen) Co., Ltd. 14 www.accetek.com Catalog-Power Inductor-2015A 1MC Series Unshielded Power Inductor Accetek Inductance1 DCR2 Tolerance Typ.(Ω) Max.(Ω) Irms3(A) Isat4(A) Part Number μH 1MC105-470KF 47 ±10% 0.095 0.170 1.45 1.62 1MC105-560KF 56 ±10% 0.112 0.190 1.36 1.53 1MC105-680KF 68 ±10% 0.138 0.220 1.19 1.49 1MC105-820KF 82 ±10% 0.150 0.250 1.11 1.17 1MC105-101KF 100 ±10% 0.200 0.350 1.02 1.1 1MC105-121KF 120 ±10% 0.243 0.400 0.94 0.99 1MC105-151KF 150 ±10% 0.300 0.470 0.81 0.9 1MC105-181KF 180 ±10% 0.320 0.630 0.76 0.78 1MC105-221KF 220 ±10% 0.451 0.730 0.67 0.77 1MC105-271KF 270 ±10% 0.500 0.970 0.62 0.68 1MC105-331KF 330 ±10% 0.750 1.150 0.52 0.59 1MC105-391KF 390 ±10% 0.794 1.300 0.49 0.54 1MC105-471KF 470 ±10% 0.969 1.480 0.44 0.50 1MC105-561KF 560 ±10% 1.047 1.900 0.39 0.47 1MC105-681KF 680 ±10% 1.245 2.250 0.36 0.43 1MC105-821KF 820 ±10% 1.420 2.550 0.32 0.41 1. 2. 3. 4. 5. E Inductance measured @ 100KHz, 0.3V at 25°C temperature. DCR measured @ 25°C. Irms: DC current for an approximate 40°C rise from 20°C ambient temperature. Isat: DC current for approximate 10% L roll off at 25°C. Specifications subject to change without notice please check our website for latest information. TAPE AND REEL SPECIFICATIONS D 0 220 w B A C 1 T E Case Size Parts per Reel Reel Dimensions(REF) Tape Dimensions(REF) A B C D E W P P0 P1 H T 1MC31 3000 330 100 13 19.5 13.5 12 8 4 2 1.8 0.35 1MC32 3000 330 100 13 19.5 13.5 12 8 4 2 2.3 0.35 1MC43 2000 330 100 13 19.5 13.5 12 8 4 2 3.6 0.4 1MC54 1500 330 100 13 19.5 13.5 12 8 4 2 4.8 0.4 1MC75 1000 330 100 13 22.5 16.5 16 12 4 2 5.3 0.4 1MC105 500 330 100 13 22.5 16.5 24 16 4 2 6.1 0.4 Accetek Electronics (Shenzhen) Co., Ltd. www.accetek.com Catalog-Power Inductor-2015A 15 1MD Series Shielded Power Inductor Accetek A FEATURES Available for ultra low profile Inductance ratings up to 1000 µH Operating Temperature range from -40°C to +125°C (Including Self-heating) 260°C reflow peak temperature qualified B PART NUMBER SYSTEM 1MD 2D11 ❶ ❷ - 100 M F ❸ ❹ ❺ ❶ Series 1MD Series Code Dimension Code (L*W*H) (mm) ❷ 2D09(3.3×3.3×1.1) 2D11 (3.3×3.3×1.3) 2D14(3.3×3.3×1.6) 2D18(3.3×3.3×2.1) ❸ Inductance Code 3D11(4.2×4.2×1.3) 3D14(4.2×4.2×1.6) e.g. Calculation 3D16(4.2×4.2×1.8) 3D18(4.2×4.2×2.1) 2R2 2.2μH 3D28(4.2×4.2×3.2) 4D18(5.0×5.0×2.0) 100 10×100μH = 10μH 4D28(5.0×5.0×3.0) 5D18(6.0×6.0×2.0) 101 10×101μH = 100μH 5D28(6.0×6.0×3.0) 6D28(7.0×7.0×3.0) 6D38(7.0×7.0×4.0) 8D28(10.1×8.3×3.0) 8D38(10.1×8.3×4.0) 8D43(10.1×8.3×4.5) ❹ Inductance Tolerance K ±10% M ±20% N ±30% ❺ C RoHS Compliant DRAWINGS AND DIMENSIONS 2D09,2D11,2D14,2D18 A A C XXX 3D11,3D14,3D16,3D18,3D28,4D18,4D28,5D18,5D28,6D28,6D38 D I C D I I B H XXX B H J J 8D28,8D38,8D43 Schematic C A I XXX I I B H J 2 XXX = Inductance value Accetek Electronics (Shenzhen) Co., Ltd. 16 www.accetek.com Catalog-Power Inductor-2015A 1MD Series Shielded Power Inductor Accetek Case Size 1MD2D09 Dimensions (mm) Amax Bmax Cmax Dtyp Href. Iref. Jref. 3.3 3.3 1.1 4.4 1.3 1.3 1.7 1MD2D11 3.3 3.3 1.3 4.4 1.3 1.3 1.7 1MD2D14 3.3 3.3 1.6 4.4 1.3 1.3 1.7 1MD2D18 3.3 3.3 2.1 4.4 1.3 1.3 1.7 1MD3D11 4.2 4.2 1.3 5.5 4.5 1.7 1.1 1MD3D14 4.2 4.2 1.6 5.5 4.5 1.7 1.1 1MD3D16 4.2 4.2 1.8 5.5 4.5 1.7 1.1 1MD3D18 4.2 4.2 2.1 5.5 4.5 1.7 1.1 1MD3D28 4.2 4.2 3.2 5.5 4.5 1.7 1.1 1MD4D18 5.0 5.0 2.0 6.9 5.3 1.9 1.5 1MD4D28 5.0 5.0 3.0 6.9 5.3 1.9 1.5 1MD5D18 6.0 6.0 2.0 8.2 6.3 2.1 2.0 1MD5D28 6.0 6.0 3.0 8.2 6.3 2.1 2.0 1MD6D28 7.0 7.0 3.0 9.5 7.3 2.6 2.0 1MD6D38 7.0 7.0 4.0 9.5 7.3 2.6 2.0 1MD8D28 10.1 8.3 3.0 / 2.8 2.0 6.1 1MD8D38 10.1 8.3 4.0 / 2.8 2.0 6.1 1MD8D43 10.1 8.3 4.5 / 2.8 2.0 6.1 D SPECIFICATIONS Inductance1 DCR2 Irms3 Isat4 Part Number μH Tolerance Typ.(Ω) Max.(Ω) A A 1MD2D09-1R2NF 1.2 ±30% 0.062 0.078 1.55 0.83 1MD2D09-1R5NF 1.5 ±30% 0.071 0.088 1.35 0.70 1MD2D09-2R4NF 2.4 ±30% 0.095 0.119 1.10 0.58 1MD2D09-3R3NF 3.3 ±30% 0.139 0.174 0.90 0.50 1MD2D09-4R7NF 4.7 ±30% 0.190 0.238 0.80 0.38 1MD2D09-6R8NF 6.8 ±30% 0.232 0.290 0.65 0.36 1MD2D09-8R2NF 8.2 ±30% 0.320 0.400 0.56 0.31 1MD2D09-100MF 10 ±20% 0.400 0.500 0.51 0.30 1MD2D09-120MF 12 ±20% 0.440 0.550 0.45 0.27 1MD2D09-150MF 15 ±20% 0.520 0.650 0.42 0.24 1MD2D09-180MF 18 ±20% 0.610 0.770 0.38 0.22 1MD2D09-220MF 22 ±20% 0.750 0.940 0.35 0.20 1MD2D09-270MF 27 ±20% 0.880 1.110 0.32 0.16 1MD2D11-1R0NF 1MD2D11-1R5NF 1.0 1.5 ±30% ±30% 0.050 0.067 0.063 0.084 1.70 1.45 1.50 1.25 1MD2D11-2R2NF 2.2 ±30% 0.076 0.096 1.40 1.10 1MD2D11-2R7NF 2.7 ±30% 0.096 0.120 1.20 0.92 1MD2D11-3R3NF 3.3 ±30% 0.123 0.154 1.00 0.88 1MD2D11-4R7NF 4.7 ±30% 0.198 0.248 0.80 0.70 1MD2D11-5R6NF 5.6 ±30% 0.211 0.264 0.75 0.65 1MD2D11-6R8NF 6.8 ±30% 0.227 0.284 0.72 0.60 1MD2D11-8R2NF 8.2 ±30% 0.301 0.376 0.60 0.52 1MD2D11-100MF 10 ±20% 0.342 0.428 0.58 0.48 1MD2D11-150MF 15 ±20% 0.530 0.663 0.46 0.40 1MD2D11-180MF 18 ±20% 0.584 0.730 0.43 0.36 1MD2D11-220MF 22 ±20% 0.641 0.801 0.42 0.35 1MD2D14-R21NF 0.21 ±30% 0.016 0.021 4.74 3.80 Accetek Electronics (Shenzhen) Co., Ltd. www.accetek.com Catalog-Power Inductor-2015A 17 1MD Series Shielded Power Inductor Accetek Inductance1 DCR2 Irms3 Isat4 Part Number μH Tolerance Typ.(Ω) Max.(Ω) A A 1MD2D14-R36NF 0.36 ±30% 0.020 0.026 4.10 3.25 1MD2D14-R60NF 0.60 ±30% 0.025 0.033 3.45 2.20 1MD2D14-R82NF 0.82 ±30% 0.030 0.039 2.85 2.10 1MD2D14-1R2NF 1.2 ±30% 0.038 0.049 2.75 1.95 1MD2D14-1R5NF 1.5 ±30% 0.050 0.063 2.00 1.80 1MD2D14-1R8NF 1.8 ±30% 0.060 0.075 1.80 1.65 1MD2D14-2R2NF 2.2 ±30% 0.075 0.094 1.60 1.50 1MD2D14-2R7NF 2.7 ±30% 0.085 0.106 1.40 1.35 1MD2D14-3R3NF 3.3 ±30% 0.100 0.125 1.24 1.20 1MD2D14-3R9NF 3.9 ±30% 0.110 0.138 1.12 1.10 1MD2D14-4R7NF 4.7 ±30% 0.135 0.169 1.00 1.00 1MD2D14-5R6NF 5.6 ±30% 0.150 0.188 0.98 0.95 1MD2D14-6R8NF 6.8 ±30% 0.170 0.213 0.92 0.85 1MD2D14-8R2NF 8.2 ±30% 0.225 0.281 0.80 0.80 1MD2D14-100MF 10 ±20% 0.235 0.294 0.76 0.70 1MD2D14-120MF 12 ±20% 0.315 0.394 0.64 0.62 1MD2D18-2R2NF 1MD2D18-3R3NF 2.2 3.3 ±30% ±30% 0.033 0.043 0.041 0.054 2.30 2.10 0.85 0.75 1MD2D18-4R7NF 4.7 ±30% 0.062 0.078 1.65 0.63 1MD2D18-6R8NF 6.8 ±30% 0.085 0.106 1.32 0.52 1MD2D18-100MF 10 ±20% 0.145 0.180 1.00 0.43 1MD2D18-150MF 15 ±20% 0.175 0.220 0.80 0.35 1MD2D18-220MF 22 ±20% 0.255 0.320 0.68 0.30 1MD2D18-330MF 33 ±20% 0.370 0.460 0.56 0.24 1MD2D18-470MF 47 ±20% 0.530 0.680 0.48 0.20 1MD3D11-2R7NF 1MD3D11-4R7NF 2.7 4.7 ±30% ±30% 0.060 0.095 0.078 0.123 1.82 1.38 0.53 0.40 1MD3D11-6R8NF 6.8 ±30% 0.150 0.180 1.05 0.34 1MD3D11-8R2NF 8.2 ±30% 0.170 0.204 0.93 0.32 1MD3D11-100MF 10 ±20% 0.200 0.240 0.90 0.28 1MD3D11-120MF 12 ±20% 0.230 0.276 0.81 0.25 1MD3D11-150MF 15 ±20% 0.310 0.372 0.68 0.23 1MD3D11-180MF 18 ±20% 0.390 0.468 0.58 0.21 1MD3D11-220MF 22 ±20% 0.450 0.540 0.53 0.19 1MD3D11-270MF 27 ±20% 0.605 0.726 0.48 0.17 1MD3D11-330MF 33 ±20% 0.685 0.822 0.41 0.15 1MD3D11-390MF 39 ±20% 0.785 0.942 0.40 0.14 1MD3D14-1R2NF 1MD3D14-1R7NF 1.2 1.7 ±30% ±30% 0.036 0.050 0.045 0.063 2.20 2.00 2.15 1.85 1MD3D14-2R2NF 2.2 ±30% 0.055 0.069 1.75 1.60 1MD3D14-2R7NF 2.7 ±30% 0.070 0.088 1.36 1.45 1MD3D14-3R3NF 3.3 ±30% 0.080 0.100 1.24 1.35 1MD3D14-3R9NF 3.9 ±30% 0.110 0.135 1.12 1.15 1MD3D14-4R7NF 4.7 ±30% 0.120 0.150 0.96 1.10 1MD3D14-8R2NF 8.2 ±30% 0.190 0.238 0.74 0.82 1MD3D14-100MF 10 ±20% 0.210 0.262 0.69 0.75 1MD3D14-120MF 12 ±20% 0.280 0.350 0.60 0.67 1MD3D14-150MF 15 ±20% 0.390 0.488 0.58 0.60 1MD3D14-220MF 22 ±20% 0.460 0.575 0.43 0.52 1MD3D16-1R5NF 1MD3D16-2R2NF 1.5 2.2 ±30% ±30% 0.040 0.055 0.052 0.072 2.29 1.95 1.55 1.20 1MD3D16-3R3NF 3.3 ±30% 0.065 0.085 1.80 1.10 1MD3D16-4R7NF 4.7 ±30% 0.080 0.105 1.62 0.90 1MD3D16-6R8NF 6.8 ±30% 0.130 0.170 1.27 0.73 1MD3D16-100MF 10 ±20% 0.160 0.210 1.15 0.55 1MD3D16-150MF 15 ±20% 0.225 0.295 0.97 0.45 1MD3D16-220MF 22 ±20% 0.330 0.430 0.80 0.40 Accetek Electronics (Shenzhen) Co., Ltd. 18 www.accetek.com Catalog-Power Inductor-2015A 1MD Series Shielded Power Inductor Accetek Inductance1 DCR2 Irms3 Isat4 Part Number μH Tolerance Typ.(Ω) Max.(Ω) A A 1MD3D16-330MF 33 ±20% 0.520 0.675 0.64 0.32 1MD3D18-1R0NF 1MD3D18-2R2NF 1.0 2.2 ±30% ±30% 0.040 0.050 0.050 0.063 2.40 2.00 2.80 1.80 1MD3D18-3R0NF 3.0 ±30% 0.055 0.069 1.80 1.60 1MD3D18-4R7NF 4.7 ±30% 0.086 0.108 1.35 1.35 1MD3D18-6R8NF 6.8 ±30% 0.120 0.150 1.10 1.10 1MD3D18-100MF 10 ±20% 0.164 0.205 0.90 0.90 1MD3D18-120MF 12 ±20% 0.220 0.275 0.80 0.80 1MD3D18-150MF 15 ±20% 0.241 0.302 0.75 0.75 1MD3D18-220MF 22 ±20% 0.339 0.424 0.60 0.60 1MD3D18-330MF 33 ±20% 0.512 0.640 0.45 0.50 1MD3D18-470MF 47 ±20% 0.771 0.964 0.35 0.40 1MD3D28-3R3NF 1MD3D28-4R7NF 3.3 4.7 ±30% ±30% 0.058 0.071 0.072 0.088 1.85 1.62 2.00 1.65 1MD3D28-6R8NF 6.8 ±30% 0.095 0.119 1.32 1.24 1MD3D28-100MF 10 ±20% 0.116 0.145 1.18 1.05 1MD3D28-150MF 15 ±20% 0.170 0.213 1.02 0.90 1MD3D28-220MF 22 ±20% 0.268 0.335 0.74 0.76 1MD3D28-330MF 33 ±20% 0.385 0.481 0.63 0.58 1MD3D28-470MF 47 ±20% 0.479 0.599 0.56 0.48 1MD4D18-1R0NF 1MD4D18-2R2NF 1.0 2.2 ±30% ±30% 0.035 0.058 0.045 0.075 2.27 1.76 1.72 1.32 1MD4D18-2R7NF 2.7 ±30% 0.080 0.105 1.50 1.28 1MD4D18-3R3NF 3.3 ±30% 0.085 0.110 1.46 1.04 1MD4D18-3R9NF 3.9 ±30% 0.120 0.155 1.22 0.88 1MD4D18-4R7NF 4.7 ±30% 0.125 0.162 1.20 0.84 1MD4D18-5R6NF 5.6 ±30% 0.130 0.170 1.18 0.80 1MD4D18-6R8NF 6.8 ±30% 0.155 0.200 1.08 0.76 1MD4D18-8R2NF 8.2 ±30% 0.190 0.245 0.97 0.68 1MD4D18-100MF 10 ±20% 0.148 0.200 1.10 0.61 1MD4D18-120MF 12 ±20% 0.156 0.210 1.07 0.56 1MD4D18-150MF 15 ±20% 0.178 0.240 1.01 0.50 1MD4D18-180MF 18 ±20% 0.250 0.338 0.85 0.48 1MD4D18-220MF 22 ±20% 0.294 0.397 0.78 0.41 1MD4D18-270MF 27 ±20% 0.327 0.441 0.74 0.35 1MD4D18-330MF 33 ±20% 0.514 0.694 0.59 0.32 1MD4D18-390MF 39 ±20% 0.525 0.709 0.59 0.30 1MD4D18-470MF 47 ±20% 0.683 0.922 0.51 0.28 1MD4D18-560MF 56 ±20% 0.800 1.080 0.47 0.26 1MD4D18-680MF 68 ±20% 1.000 1.300 0.42 0.24 1MD4D18-820MF 82 ±20% 1.200 1.560 0.39 0.22 1MD4D18-101MF 100 ±20% 1.330 1.730 0.37 0.20 1MD4D18-121MF 120 ±20% 1.840 2.390 0.31 0.18 1MD4D18-151MF 150 ±20% 2.050 2.670 0.30 0.15 1MD4D18-181MF 180 ±20% 3.050 4.000 0.24 0.14 1MD4D28-1R2NF 1MD4D28-1R8NF 1.2 1.8 ±30% ±30% 0.018 0.020 0.024 0.028 3.21 2.97 2.56 2.20 1MD4D28-2R2NF 2.2 ±30% 0.023 0.031 2.79 2.04 1MD4D28-2R7NF 2.7 ±30% 0.032 0.043 2.37 1.60 1MD4D28-3R3NF 3.3 ±30% 0.036 0.049 2.22 1.57 1MD4D28-3R9NF 3.9 ±30% 0.048 0.065 1.94 1.44 1MD4D28-4R7NF 4.7 ±30% 0.053 0.072 1.84 1.32 1MD4D28-5R6NF 5.6 ±30% 0.075 0.101 1.55 1.17 1MD4D28-6R8NF 6.8 ±30% 0.081 0.109 1.49 1.12 1MD4D28-8R2NF 8.2 ±30% 0.087 0.118 1.44 1.04 1MD4D28-100MF 10 ±20% 0.095 0.128 1.38 1.00 1MD4D28-120MF 12 ±20% 0.098 0.132 1.36 0.84 Accetek Electronics (Shenzhen) Co., Ltd. www.accetek.com Catalog-Power Inductor-2015A 19 1MD Series Shielded Power Inductor Accetek Inductance1 DCR2 Irms3 Isat4 Part Number μH Tolerance Typ.(Ω) Max.(Ω) A A 1MD4D28-150MF 15 ±20% 0.110 0.149 1.28 0.76 1MD4D28-180MF 18 ±20% 0.123 0.166 1.21 0.72 1MD4D28-220MF 22 ±20% 0.175 0.235 1.02 0.70 1MD4D28-270MF 27 ±20% 0.193 0.261 0.96 0.58 1MD4D28-330MF 33 ±20% 0.255 0.331 0.84 0.56 1MD4D28-390MF 39 ±20% 0.284 0.384 0.80 0.50 1MD4D28-470MF 47 ±20% 0.435 0.587 0.64 0.48 1MD4D28-560MF 56 ±20% 0.463 0.625 0.62 0.41 1MD4D28-680MF 68 ±20% 0.518 0.699 0.59 0.35 1MD4D28-820MF 82 ±20% 0.678 0.915 0.52 0.32 1MD4D28-101MF 100 ±20% 0.766 1.020 0.48 0.29 1MD4D28-121MF 120 ±20% 0.977 1.270 0.43 0.27 1MD4D28-151MF 150 ±20% 1.080 1.350 0.41 0.24 1MD4D28-181MF 180 ±20% 1.230 1.540 0.38 0.22 1MD4D28-221MF 220 ±20% 1.376 1.720 0.36 0.20 1MD4D28-271MF 270 ±20% 1.560 1.950 0.34 0.16 1MD5D18-2R2NF 1MD5D18-3R3NF 2.2 3.3 ±30% ±30% 0.027 0.035 0.037 0.047 2.58 2.27 2.40 2.00 1MD5D18-4R1NF 4.1 ±30% 0.042 0.057 2.07 1.95 1MD5D18-5R4NF 5.4 ±30% 0.056 0.076 1.79 1.60 1MD5D18-6R2NF 6.2 ±30% 0.071 0.096 1.59 1.40 1MD5D18-8R9NF 8.9 ±30% 0.086 0.116 1.45 1.25 1MD5D18-100MF 10 ±20% 0.092 0.124 1.40 1.20 1MD5D18-120MF 12 ±20% 0.113 0.153 1.26 1.10 1MD5D18-150MF 15 ±20% 0.145 0.196 1.11 0.97 1MD5D18-180MF 18 ±20% 0.155 0.210 1.08 0.85 1MD5D18-220MF 22 ±20% 0.215 0.290 0.91 0.80 1MD5D18-270MF 27 ±20% 0.245 0.330 0.86 0.75 1MD5D18-330MF 33 ±20% 0.285 0.385 0.79 0.65 1MD5D18-390MF 39 ±20% 0.385 0.520 0.68 0.57 1MD5D18-470MF 47 ±20% 0.440 0.595 0.64 0.54 1MD5D18-560MF 56 ±20% 0.493 0.665 0.60 0.50 1MD5D18-680MF 68 ±20% 0.622 0.840 0.54 0.43 1MD5D18-820MF 82 ±20% 0.725 0.978 0.50 0.41 1MD5D18-101MF 100 ±20% 0.895 1.200 0.45 0.36 1MD5D18-121MF 120 ±20% 1.200 1.500 0.39 0.33 1MD5D18-151MF 150 ±20% 1.368 1.710 0.36 0.31 1MD5D18-181MF 180 ±20% 2.704 3.380 0.26 0.21 1MD5D18-221MF 220 ±20% 3.472 4.340 0.23 0.18 1MD5D28-2R5NF 1MD5D28-3R0NF 2.5 3.0 ±30% ±30% 0.013 0.018 0.018 0.024 3.72 3.16 2.60 2.40 1MD5D28-4R2NF 4.2 ±30% 0.023 0.031 2.80 2.20 1MD5D28-5R3NF 5.3 ±30% 0.028 0.038 2.54 1.90 1MD5D28-6R2NF 6.2 ±30% 0.033 0.045 2.34 1.80 1MD5D28-8R2NF 8.2 ±30% 0.039 0.053 2.15 1.60 1MD5D28-100MF 10 ±20% 0.048 0.065 1.94 1.30 1MD5D28-120MF 12 ±20% 0.056 0.076 1.79 1.20 1MD5D28-150MF 15 ±20% 0.076 0.103 1.54 1.10 1MD5D28-180MF 18 ±20% 0.082 0.110 1.48 1.00 1MD5D28-220MF 22 ±20% 0.090 0.122 1.41 0.90 1MD5D28-270MF 27 ±20% 0.120 0.175 1.22 0.85 1MD5D28-330MF 33 ±20% 0.140 0.189 1.13 0.75 1MD5D28-390MF 39 ±20% 0.157 0.212 1.07 0.70 1MD5D28-470MF 47 ±20% 0.185 0.250 0.99 0.62 1MD5D28-560MF 56 ±20% 0.226 0.305 0.89 0.58 1MD5D28-680MF 68 ±20% 0.263 0.355 0.83 0.52 1MD5D28-820MF 82 ±20% 0.343 0.463 0.72 0.46 Accetek Electronics (Shenzhen) Co., Ltd. 20 www.accetek.com Catalog-Power Inductor-2015A 1MD Series Shielded Power Inductor Accetek Inductance1 DCR2 Irms3 Isat4 Part Number μH Tolerance Typ.(Ω) Max.(Ω) A A 1MD5D28-101MF 100 ±20% 0.385 0.520 0.68 0.42 1MD5D28-121MF 120 ±20% 0.448 0.560 0.63 0.40 1MD5D28-151MF 150 ±20% 0.544 0.680 0.58 0.35 1MD5D28-181MF 180 ±20% 0.744 0.930 0.49 0.32 1MD5D28-221MF 220 ±20% 0.920 1.150 0.44 0.30 1MD5D28-271MF 270 ±20% 1.248 1.560 0.38 0.27 1MD5D28-331MF 330 ±20% 1.584 1.980 0.34 0.25 1MD5D28-391MF 390 ±20% 2.000 2.500 0.30 0.22 1MD5D28-471MF 470 ±20% 2.160 2.700 0.29 0.20 0.18 1MD5D28-561MF 560 ±20% 2.496 3.120 0.27 1MD5D28-681MF 680 ±20% 3.320 4.150 0.23 0.16 1MD6D28-3R0NF 1MD6D28-3R9NF 3.0 3.9 ±30% ±30% 0.018 0.020 0.024 0.027 3.33 3.16 3.00 2.60 1MD6D28-5R0NF 5.0 ±30% 0.023 0.031 2.95 2.40 1MD6D28-6R0NF 6.0 ±30% 0.026 0.035 2.77 2.25 1MD6D28-7R3NF 7.3 ±30% 0.040 0.054 2.24 2.10 1MD6D28-8R6NF 8.6 ±30% 0.043 0.058 2.16 1.85 1MD6D28-100MF 10 ±20% 0.048 0.065 2.04 1.70 1MD6D28-120MF 12 ±20% 0.052 0.070 1.96 1.55 1MD6D28-150MF 15 ±20% 0.062 0.084 1.80 1.40 1MD6D28-180MF 18 ±20% 0.070 0.095 1.69 1.32 1MD6D28-220MF 22 ±20% 0.095 0.128 1.45 1.20 1MD6D28-270MF 27 ±20% 0.105 0.142 1.38 1.05 1MD6D28-330MF 33 ±20% 0.122 0.165 1.28 0.97 1MD6D28-390MF 39 ±20% 0.156 0.210 1.13 0.86 1MD6D28-470MF 47 ±20% 0.176 0.238 1.07 0.80 1MD6D28-560MF 56 ±20% 0.205 0.277 0.99 0.73 1MD6D28-680MF 68 ±20% 0.225 0.304 0.94 0.65 1MD6D28-820MF 82 ±20% 0.290 0.390 0.83 0.60 1MD6D28-101MF 100 ±20% 0.397 0.535 0.71 0.54 1MD6D28-121MF 120 ±20% 0.600 0.750 0.58 0.51 1MD6D28-151MF 150 ±20% 0.760 0.950 0.51 0.47 1MD6D28-181MF 180 ±20% 0.960 1.200 0.46 0.41 1MD6D28-221MF 220 ±20% 1.200 1.500 0.41 0.37 1MD6D28-271MF 270 ±20% 1.360 1.700 0.38 0.33 1MD6D28-331MF 330 ±20% 1.720 2.150 0.34 0.28 1MD6D28-471MF 470 ±20% 2.520 3.150 0.28 0.21 1MD6D28-681MF 680 ±20% 4.120 5.150 0.22 0.20 1MD6D38-3R3NF 1MD6D38-5R0NF 3.3 5.0 ±30% ±30% 0.015 0.018 0.020 0.024 4.08 3.73 3.50 2.90 1MD6D38-6R2NF 6.2 ±30% 0.020 0.027 3.54 2.50 1MD6D38-7R4NF 7.4 ±30% 0.023 0.031 3.30 2.30 1MD6D38-8R7NF 8.7 ±30% 0.025 0.034 3.16 2.20 1MD6D38-100MF 10 ±20% 0.028 0.038 2.99 2.00 1MD6D38-120MF 12 ±20% 0.039 0.053 2.53 1.70 1MD6D38-150MF 15 ±20% 0.042 0.057 2.44 1.60 1MD6D38-180MF 18 ±20% 0.068 0.092 1.92 1.50 1MD6D38-220MF 22 ±20% 0.071 0.096 1.88 1.30 1MD6D38-270MF 27 ±20% 0.081 0.109 1.76 1.20 1MD6D38-330MF 33 ±20% 0.092 0.124 1.65 1.10 1MD6D38-390MF 39 ±20% 0.102 0.138 1.57 1.00 1MD6D38-470MF 47 ±20% 0.115 0.155 1.47 0.95 1MD6D38-560MF 56 ±20% 0.140 0.202 1.34 0.85 1MD6D38-680MF 68 ±20% 0.173 0.234 1.20 0.75 1MD6D38-820MF 82 ±20% 0.240 0.324 1.02 0.70 1MD6D38-101MF 100 ±20% 0.265 0.358 0.97 0.65 1MD6D38-121MF 120 ±20% 0.376 0.470 0.82 0.59 Accetek Electronics (Shenzhen) Co., Ltd. www.accetek.com Catalog-Power Inductor-2015A 21 1MD Series Shielded Power Inductor Accetek Inductance1 DCR2 Irms3 Isat4 Part Number μH Tolerance Typ.(Ω) Max.(Ω) A A 1MD6D38-151MF 150 ±20% 0.464 0.580 0.73 0.54 1MD6D38-181MF 180 ±20% 0.552 0.690 0.67 0.49 1MD6D38-221MF 220 ±20% 0.712 0.890 0.59 0.43 1MD6D38-271MF 270 ±20% 1.032 1.290 0.49 0.40 1MD6D38-331MF 330 ±20% 1.360 1.700 0.43 0.37 1MD6D38-391MF 390 ±20% 1.400 1.750 0.42 0.34 1MD6D38-471MF 470 ±20% 1.760 2.200 0.38 0.32 1MD6D38-561MF 560 ±20% 2.280 2.850 0.33 0.29 1MD6D38-681MF 680 ±20% 2.560 3.200 0.31 0.25 0.22 1MD6D38-821MF 820 ±20% 3.240 4.050 0.28 1MD6D38-102MF 1000 ±20% 4.560 5.700 0.23 0.20 1MD8D28-1R0NF 1MD8D28-2R5NF 1.0 2.5 ±30% ±30% 0.008 0.012 0.011 0.016 6.50 4.50 7.00 6.40 1MD8D28-3R3NF 3.3 ±30% 0.014 0.018 4.00 6.00 1MD8D28-4R7NF 4.7 ±30% 0.019 0.025 3.40 4.50 1MD8D28-7R3NF 7.3 ±30% 0.030 0.039 2.80 3.40 1MD8D28-100MF 10 ±20% 0.036 0.047 2.50 3.20 1MD8D28-150MF 15 ±20% 0.053 0.069 1.90 2.35 1MD8D28-220MF 22 ±20% 0.076 0.099 1.60 1.85 1MD8D28-330MF 33 ±20% 0.120 0.156 1.30 1.45 1MD8D28-470MF 47 ±20% 0.150 0.195 1.15 1.30 1MD8D28-680MF 68 ±20% 0.220 0.286 0.92 0.98 1MD8D28-101MF 100 ±20% 0.330 0.430 0.75 0.80 1MD8D38-1R8NF 1MD8D38-2R5NF 1.8 2.5 ±30% ±30% 0.013 0.014 0.016 0.018 6.80 6.00 7.00 6.50 1MD8D38-3R5NF 3.5 ±30% 0.019 0.024 5.20 5.00 1MD8D38-4R7NF 4.7 ±30% 0.023 0.029 4.40 4.60 1MD8D38-6R0NF 6.0 ±30% 0.025 0.032 4.00 4.20 1MD8D38-100MF 10 ±20% 0.038 0.048 3.20 3.00 1MD8D38-150MF 15 ±20% 0.053 0.067 2.50 2.75 1MD8D38-220MF 22 ±20% 0.084 0.105 2.00 2.30 1MD8D38-330MF 33 ±20% 0.125 0.157 1.60 1.75 1MD8D38-470MF 47 ±20% 0.151 0.189 1.42 1.52 1MD8D38-680MF 68 ±20% 0.232 0.290 1.08 1.30 1MD8D38-101MF 100 ±20% 0.328 0.410 0.88 1.05 1MD8D43-R68NF 1MD8D43-1R2NF 0.68 1.2 ±30% ±30% 0.007 0.009 0.010 0.012 6.90 6.20 9.00 8.00 1MD8D43-2R0NF 2.0 ±30% 0.011 0.014 5.50 7.00 1MD8D43-3R9NF 3.9 ±30% 0.015 0.019 4.50 5.90 1MD8D43-4R7NF 4.7 ±30% 0.017 0.022 4.10 5.60 1MD8D43-6R8NF 6.8 ±30% 0.020 0.025 3.90 4.40 1MD8D43-100MF 10 ±20% 0.029 0.036 3.20 4.00 1MD8D43-150MF 15 ±20% 0.042 0.053 2.30 2.90 1MD8D43-220MF 22 ±20% 0.060 0.075 1.80 2.60 1MD8D43-330MF 33 ±20% 0.100 0.125 1.40 2.20 1MD8D43-470MF 47 ±20% 0.120 0.150 1.30 1.80 1MD8D43-680MF 68 ±20% 0.190 0.240 1.00 1.50 1MD8D43-101MF 100 ±20% 0.290 0.360 0.80 1.30 1. 2. 3. 4. 5. Inductance measured @ 100KHz, 0.3V at 25°C temperature. DCR measured @ 25°C. Irms: DC current for an approximate 40°C rise from 20°C ambient temperature. Isat: DC current for approximate 35% L roll off at 25°C. Specifications subject to change without notice please check our website for latest information. Accetek Electronics (Shenzhen) Co., Ltd. 22 www.accetek.com Catalog-Power Inductor-2015A 1MD Series Shielded Power Inductor Accetek E TAPE AND REEL SPECIFICATIONS 2D09,2D11,2D14,2D18 P0 P 3D11,3D14,3D16,3D18,3D28,4D18,4D28,5D18,5D28,6D28,6D38 P0 P H P1 220 220 W W H P1 T T 8D28,8D38,8D43 Reel Dimensions D P H P1 B A C 220 w P0 T E Case Size Parts per Reel 1MD2D09 Reel Dimensions(REF) Tape Dimensions(REF) A B C D E W P P0 P1 H T 3000 330 100 13 19.5 13.5 12.0 8 4 2 1.4 0.3 1MD2D11 3000 330 100 13 19.5 13.5 12.0 8 4 2 1.6 0.3 1MD2D14 3000 330 100 13 19.5 13.5 12.0 8 4 2 1.6 0.3 1MD2D18 3000 330 100 13 19.5 13.5 12.0 8 4 2 2.1 0.3 1MD3D11 3000 330 100 13 19.5 13.5 12.0 8 4 2 2.1 0.3 1MD3D14 3000 330 100 13 19.5 13.5 12.0 8 4 2 2.1 0.3 1MD3D16 3000 330 100 13 19.5 13.5 12.0 8 4 2 2.1 0.3 1MD3D18 3000 330 100 13 19.5 13.5 12.0 8 4 2 2.1 0.3 1MD3D28 3000 330 100 13 19.5 13.5 12.0 8 4 2 3.3 0.3 1MD4D18 3000 330 100 13 19.5 13.5 12.0 8 4 2 2.1 0.3 1MD4D28 2500 330 100 13 19.5 13.5 12.0 8 4 2 3.3 0.3 1MD5D18 4000 330 100 13 19.5 13.5 12.0 8 4 2 2.2 0.3 1MD5D28 2500 330 100 13 19.5 13.5 12.0 8 4 2 3.2 0.3 1MD6D28 1500 330 100 13 22.5 16.5 16.0 12 4 2 3.4 0.4 1MD6D38 1000 330 100 13 22.5 16.5 16.0 12 4 2 4.5 0.4 1MD8D28 1000 330 100 13 22.5 16.5 16.0 12 4 2 3.5 0.4 1MD8D38 1000 330 100 13 22.5 16.5 16.0 12 4 2 4.3 0.4 1MD8D43 800 330 100 13 22.5 16.5 16.0 12 4 2 4.3 0.4 Accetek Electronics (Shenzhen) Co., Ltd. www.accetek.com Catalog-Power Inductor-2015A 23 1ME Series Low Profile Shielded Power Inductor Accetek A FEATURES Magnetic epoxy shielded construction reduces 30% or more component volume Shielded construction reduces leakage flux and EMI Metallization on ferrite core results in excellent shock resistance and damage-free durability 30% higher current rating than conventional inductors of equal size Save PCB real estate and save more power Operating Temperature range from -40°C to +125°C (Including Self-heating) 260°C reflow peak temperature qualified B PART NUMBER SYSTEM 1ME 3010 ❶ ❷ - 100 M F ❸ ❹ ❺ ❶ Series 1ME Series Code ❷ Dimension Code (L*W*H) (mm) 252010(2.5×2.0×1.0) 252012 (2.5×2.0×1.2) 3010(3.0×3.0×1.0) 3012(3.0×3.0×1.2) ❸ Inductance Code 3015(3.0×3.0×1.5) 4010(4.0×4.0×1.0) e.g. Calculation 4012(4.0×4.0×1.2) 4018(4.0×4.0×1.8) 2R2 2.2μH 4020(4.0×4.0×2.0) 4026(4.0×4.0×2.6) 100 0 4030(4.0×4.0×3.0) 5012(5.0×5.0×1.2) 5020(5.0×5.0×2.0) 5040(5.0×5.0×4.0) 6020(6.0×6.0×2.0) 6028(6.0×6.0×2.8) 6045(6.0×6.0×4.5) 8040(8.0×8.0×4.0) 101 10×10 μH = 10μH 1 10×10 μH = 100μH ❹ Inductance Tolerance M ±20% N ±30% ❺ RoHS Compliant Accetek Electronics (Shenzhen) Co., Ltd. 24 www.accetek.com Catalog-Power Inductor-2015A 1ME Series Low Profile Shielded Power Inductor Accetek C DRAWINGS AND DIMENSIONS Fig.A - 1ME2520 H D C A B E I F J E I A C H D xxx B Fig.B - 1ME30xx,40xx,60xx,80xx E I F J E I Land Pattern Land Pattern Fig.C - 1ME50xx B C Schematic D 1 H A xxx E I F J E I 2 Land Pattern XXX = Inductance value Case Size Dimensions (mm) A B Cmax D E F Href. Iref. Jref. Fig. 1ME252010 2.5±0.1 2.0±0.1 1.0 1.5±0.2 0.8±0.2 0.8±0.2 2.0 0.85 0.8 A 1ME252012 2.5±0.1 2.0±0.1 1.2 1.5±0.2 0.8±0.2 0.8±0.2 2.0 0.85 0.8 A 1ME3010 3.0±0.2 3.0±0.2 1.0 2.5±0.2 0.75±0.2 1.5±0.2 2.7 0.8 1.5 B 1ME3012 3.0±0.2 3.0±0.2 1.2 2.5±0.2 0.75±0.2 1.5±0.2 2.7 0.8 1.5 B 1ME3015 3.0±0.2 3.0±0.2 1.5 2.5±0.2 0.75±0.2 1.5±0.2 2.7 0.8 1.5 B 1ME4010 4.0±0.2 4.0±0.2 1.0 3.3±0.2 0.95±0.2 2.1±0.2 3.7 1.1 1.9 B 1ME4012 4.0±0.2 4.0±0.2 1.2 3.3±0.2 0.95±0.2 2.1±0.2 3.7 1.1 1.9 B 1ME4018 4.0±0.2 4.0±0.2 1.8 3.3±0.2 0.95±0.2 2.1±0.2 3.7 1.1 1.9 B 1ME4020 4.0±0.2 4.0±0.2 2.0 3.3±0.2 0.95±0.2 2.1±0.2 3.7 1.1 1.9 B 1ME4026 4.0±0.2 4.0±0.2 2.6 3.3±0.2 0.95±0.2 2.1±0.2 3.7 1.1 1.9 B 1ME4030 4.0±0.2 4.0±0.2 3.0 3.3±0.2 0.95±0.2 2.1±0.2 3.7 1.1 1.9 B 1ME5012 5.0±0.2 5.0±0.2 1.2 4.0±0.2 1.25±0.2 2.5±0.2 4.4 1.5 2.1 C 1ME5020 5.0±0.2 5.0±0.2 2.0 4.0±0.2 1.25±0.2 2.5±0.2 4.2 1.4 2.3 C 1ME5040 5.0±0.2 5.0±0.2 4.0 4.0±0.2 1.25±0.2 2.5±0.2 4.2 1.4 2.3 C 1ME6020 6.0±0.3 6.0±0.3 2.0 4.9±0.2 1.55±0.3 2.9±0.2 5.7 1.7 2.8 B 1ME6028 6.0±0.3 6.0±0.3 2.8 4.9±0.2 1.55±0.3 2.9±0.2 5.7 1.7 2.8 B 1ME6045 6.0±0.3 6.0±0.3 4.5 4.9±0.2 1.55±0.3 2.9±0.2 5.7 1.7 2.8 B 1ME8040 8.0±0.3 8.0±0.3 4.2 6.3±0.2 2.00±0.3 4.0±0.2 7.5 2.2 3.8 B Accetek Electronics (Shenzhen) Co., Ltd. www.accetek.com Catalog-Power Inductor-2015A 25 1ME Series Low Profile Shielded Power Inductor Accetek D SPECIFICATIONS Inductance1 DCR2 Irms3 Isat4 Drawing Fig. Part Number μH Tolerance Typ.(Ω) Max.(Ω) A A 1ME252010-R47NF 0.47 ±30% 0.047 0.056 2.35 3.35 A 1ME252010-R68NF 0.68 ±30% 0.062 0.074 2.00 2.75 A 1ME252010-1R0NF 1.0 ±30% 0.090 0.108 1.65 2.20 A 1ME252010-1R5NF 1.5 ±30% 0.152 0.182 1.30 2.10 A 1ME252010-2R2NF 2.2 ±30% 0.174 0.209 1.20 1.60 A 1ME252010-3R3MF 3.3 ±20% 0.273 0.328 0.90 1.30 A 1ME252010-4R7MF 4.7 ±20% 0.469 0.563 0.70 1.15 A 1ME252010-6R8MF 6.8 ±20% 0.747 0.896 0.59 0.92 A 1ME252010-100MF 10 ±20% 0.910 1.092 0.50 0.78 A 1ME252012-R47NF 1ME252012-R68NF 0.47 0.68 ±30% ±30% 0.047 0.057 0.056 0.068 2.15 1.95 4.27 3.68 A A 1ME252012-1R0NF 1.0 ±30% 0.069 0.083 1.93 2.90 A 1ME252012-1R2NF 1.2 ±30% 0.099 0.119 1.46 2.67 A 1ME252012-1R5MF 1.5 ±20% 0.113 0.136 1.40 2.51 A 1ME252012-2R2MF 2.2 ±20% 0.166 0.199 1.15 2.07 A 1ME252012-2R7MF 2.7 ±20% 0.184 0.221 1.09 1.92 A 1ME252012-3R3MF 3.3 ±20% 0.203 0.244 1.04 1.80 A 1ME252012-3R6MF 3.6 ±20% 0.268 0.322 0.90 1.64 A 1ME252012-4R3MF 4.3 ±20% 0.290 0.348 0.87 1.53 A 1ME252012-4R7MF 4.7 ±20% 0.290 0.348 0.84 1.25 A 1ME252012-5R1MF 5.1 ±20% 0.385 0.462 0.75 1.37 A 1ME252012-5R6MF 5.6 ±20% 0.414 0.497 0.73 1.25 A 1ME252012-6R2MF 6.2 ±20% 0.417 0.500 0.73 1.16 A 1ME252012-6R8MF 6.8 ±20% 0.447 0.536 0.69 1.09 A 1ME252012-7R5MF 7.5 ±20% 0.470 0.564 0.68 1.09 A 1ME252012-8R2MF 8.2 ±20% 0.506 0.607 0.65 1.10 A 1ME252012-9R1MF 9.1 ±20% 0.531 0.637 0.62 1.02 A 1ME252012-100MF 10 ±20% 0.531 0.637 0.62 0.88 A 1ME252012-120MF 12 ±20% 0.827 0.992 0.51 0.88 A 1ME252012-150MF 15 ±20% 1.224 1.469 0.42 0.77 A 1ME252012-220MF 22 ±20% 1.520 1.824 0.38 0.59 A 1ME3010-1R0NF 1ME3010-1R5NF 1.0 1.5 ±30% ±30% 0.065 0.080 0.085 0.104 1.45 1.30 1.40 1.27 B B 1ME3010-2R2NF 2.2 ±30% 0.110 0.143 1.09 1.15 B 1ME3010-2R7NF 2.7 ±30% 0.130 0.169 1.02 1.00 B 1ME3010-3R3NF 3.3 ±30% 0.145 0.189 0.96 0.97 B 1ME3010-3R6MF 3.6 ±20% 0.165 0.215 0.90 0.95 B 1ME3010-4R7MF 4.7 ±20% 0.225 0.293 0.77 0.75 B 1ME3010-6R8MF 6.8 ±20% 0.305 0.397 0.66 0.55 B 1ME3010-100MF 10 ±20% 0.400 0.520 0.58 0.55 B 1ME3010-120MF 12 ±20% 0.505 0.657 0.52 0.43 B 1ME3010-150MF 15 ±20% 0.610 0.793 0.47 0.42 B 1ME3010-220MF 22 ±20% 0.930 1.209 0.38 0.35 B 1ME3010-270MF 27 ±20% 1.080 1.404 0.35 0.30 B 1ME3010-330MF 33 ±20% 1.550 2.015 0.30 0.29 B 1ME3010-390MF 39 ±20% 1.750 2.275 0.28 0.28 B 1ME3010-430MF 43 ±20% 1.800 2.340 0.27 0.23 B 1ME3010-470MF 47 ±20% 1.950 2.535 0.26 0.22 B 1ME3010-510MF 51 ±20% 2.200 2.860 0.25 0.21 B 1ME3010-560MF 56 ±20% 2.320 3.016 0.24 0.21 B 1ME3012-R82NF 1ME3012-1R0NF 0.82 1.0 ±30% ±30% 0.030 0.040 0.039 0.052 2.47 2.20 2.05 1.87 B B 1ME3012-1R2NF 1.2 ±30% 0.045 0.059 2.01 2.22 B 1ME3012-1R5NF 1.5 ±30% 0.045 0.059 2.01 1.62 B Accetek Electronics (Shenzhen) Co., Ltd. 26 www.accetek.com Catalog-Power Inductor-2015A 1ME Series Low Profile Shielded Power Inductor Accetek Inductance1 DCR2 Irms3 Isat4 Drawing Fig. Part Number μH Tolerance Typ.(Ω) Max.(Ω) A A 1ME3012-1R8NF 1.8 ±30% 0.063 0.082 1.65 1.30 B 1ME3012-2R2NF 2.2 ±30% 0.075 0.098 1.55 1.20 B 1ME3012-2R4NF 2.4 ±30% 0.068 0.088 1.60 1.15 B 1ME3012-2R7NF 2.7 ±30% 0.085 0.111 1.48 1.14 B 1ME3012-3R3MF 3.3 ±20% 0.100 0.130 1.36 1.05 B 1ME3012-3R9MF 3.9 ±20% 0.145 0.189 1.24 1.00 B 1ME3012-4R7MF 4.7 ±20% 0.120 0.156 1.24 0.90 B 1ME3012-6R8MF 6.8 ±20% 0.190 0.247 0.98 0.75 B 1ME3012-100MF 10 ±20% 0.265 0.345 0.83 0.60 B 1ME3012-120MF 12 ±20% 0.345 0.449 0.73 0.48 B 1ME3012-150MF 15 ±20% 0.360 0.468 0.71 0.45 B 1ME3012-180MF 18 ±20% 0.545 0.709 0.58 0.43 B 1ME3012-220MF 22 ±20% 0.645 0.839 0.53 0.42 B 1ME3012-270MF 27 ±20% 0.870 1.131 0.47 0.36 B 1ME3012-330MF 33 ±20% 0.875 1.138 0.46 0.35 B 1ME3012-360MF 36 ±20% 0.950 1.235 0.44 0.34 B 1ME3012-390MF 39 ±20% 1.330 1.729 0.37 0.30 B 1ME3012-470MF 47 ±20% 1.450 1.885 0.35 0.27 B 1ME3012-680MF 68 ±20% 1.670 2.171 0.33 0.24 B 1ME3012-820MF 82 ±20% 2.540 3.302 0.27 0.17 B 1ME3012-101MF 100 ±20% 2.860 3.718 0.25 0.21 B 1ME3015-1R0NF 1ME3015-1R2NF 1.0 1.2 ±30% ±30% 0.030 0.040 0.039 0.052 2.35 1.95 2.32 2.21 B B 1ME3015-1R5NF 1.5 ±30% 0.050 0.065 1.70 2.30 B 1ME3015-1R8NF 1.8 ±30% 0.050 0.065 1.70 1.75 B 1ME3015-2R2NF 2.2 ±30% 0.060 0.078 1.60 1.60 B 1ME3015-2R7NF 2.7 ±30% 0.075 0.098 1.43 1.52 B 1ME3015-3R3MF 3.3 ±20% 0.080 0.104 1.36 1.32 B 1ME3015-3R6MF 3.6 ±20% 0.105 0.137 1.20 1.28 B 1ME3015-4R3MF 4.3 ±20% 0.115 0.150 1.14 1.20 B 1ME3015-4R7MF 4.7 ±20% 0.125 0.163 1.09 1.10 B 1ME3015-5R1MF 5.1 ±20% 0.133 0.173 1.05 1.00 B 1ME3015-6R2MF 6.2 ±20% 0.195 0.254 0.86 1.00 B 1ME3015-6R8MF 6.8 ±20% 0.200 0.260 0.85 0.85 B 1ME3015-100MF 10 ±20% 0.250 0.325 0.77 0.72 B 1ME3015-120MF 12 ±20% 0.320 0.416 0.68 0.70 B 1ME3015-150MF 15 ±20% 0.350 0.455 0.65 0.66 B 1ME3015-180MF 18 ±20% 0.430 0.559 0.59 0.56 B 1ME3015-220MF 22 ±20% 0.460 0.598 0.57 0.52 B 1ME3015-270MF 27 ±20% 0.730 0.949 0.45 0.48 B 1ME3015-330MF 33 ±20% 0.820 1.066 0.43 0.44 B 1ME3015-390MF 39 ±20% 0.995 1.294 0.39 0.41 B 1ME3015-430MF 43 ±20% 1.060 1.378 0.37 0.37 B 1ME3015-470MF 47 ±20% 1.250 1.625 0.35 0.35 B 1ME3015-560MF 56 ±20% 1.280 1.664 0.34 0.33 B 1ME3015-620MF 62 ±20% 1.610 2.093 0.30 0.30 B 1ME3015-680MF 68 ±20% 2.700 3.510 0.23 0.28 B 1ME3015-101MF 100 ±20% 3.110 4.043 0.21 0.23 B 1ME3015-151MF 150 ±20% 3.800 4.940 0.19 0.18 B 1ME4010-1R0NT 1ME4010-1R5NT 1.0 1.5 ±30% ±30% 0.056 0.070 0.067 0.084 1.90 1.70 2.00 1.68 B B 1ME4010-2R2MT 2.2 ±20% 0.085 0.102 1.50 1.20 B 1ME4010-3R3MT 3.3 ±20% 0.100 0.120 1.40 1.10 B 1ME4010-4R7MT 4.7 ±20% 0.140 0.168 1.20 0.95 B 1ME4010-6R8MT 6.8 ±20% 0.200 0.240 1.00 0.80 B 1ME4010-100MT 10 ±20% 0.300 0.360 0.75 0.62 B 1ME4010-150MT 15 ±20% 0.430 0.516 0.60 0.54 B Accetek Electronics (Shenzhen) Co., Ltd. www.accetek.com Catalog-Power Inductor-2015A 27 1ME Series Low Profile Shielded Power Inductor Accetek Inductance1 DCR2 Irms3 Isat4 Drawing Part Number μH Tolerance Typ.(Ω) Max.(Ω) A A Fig. 1ME4010-220MT 22 ±20% 0.570 0.684 0.50 0.45 B 1ME4012-R82NF 1ME4012-1R0NF 0.82 1.0 ±30% ±30% 0.050 0.050 0.065 0.065 1.65 1.65 3.02 2.61 B B 1ME4012-1R5NF 1.5 ±30% 0.065 0.085 1.46 2.10 B 1ME4012-1R8NF 1.8 ±30% 0.080 0.104 1.32 2.12 B 1ME4012-2R2NF 2.2 ±30% 0.080 0.104 1.32 1.76 B 1ME4012-2R7NF 2.7 ±30% 0.090 0.117 1.25 1.90 B 1ME4012-3R3NF 3.3 ±30% 0.110 0.143 1.12 1.72 B 1ME4012-3R6NF 3.6 ±30% 0.110 0.143 1.12 1.20 B 1ME4012-4R3NF 4.3 ±30% 0.140 0.182 1.00 1.58 B 1ME4012-4R7NF 4.7 ±30% 0.125 0.163 1.05 1.15 B 1ME4012-5R1NF 5.1 ±30% 0.155 0.202 0.95 1.55 B 1ME4012-5R6NF 5.6 ±30% 0.140 0.182 1.00 1.00 B 1ME4012-6R8MF 6.8 ±20% 0.198 0.257 0.84 0.85 B 1ME4012-100MF 10 ±20% 0.265 0.345 0.77 0.80 B 1ME4012-120MF 12 ±20% 0.290 0.377 0.70 0.66 B 1ME4012-150MF 15 ±20% 0.340 0.442 0.64 0.56 B 1ME4012-180MF 18 ±20% 0.470 0.611 0.55 0.55 B 1ME4012-220MF 22 ±20% 0.587 0.763 0.49 0.46 B 1ME4012-270MF 27 ±20% 0.720 0.936 0.45 0.50 B 1ME4012-330MF 33 ±20% 0.810 1.053 0.42 0.42 B 1ME4012-360MF 36 ±20% 0.900 1.170 0.40 0.40 B 1ME4012-390MF 39 ±20% 1.100 1.430 0.37 0.55 B 1ME4012-470MF 47 ±20% 1.100 1.430 0.37 0.35 B 1ME4012-560MF 56 ±20% 1.250 1.625 0.33 0.33 B 1ME4012-680MF 68 ±20% 1.950 2.535 0.27 0.38 B 1ME4012-820MF 82 ±20% 2.140 2.782 0.26 0.28 B 1ME4012-101MF 100 ±20% 2.210 2.873 0.25 0.25 B 1ME4018-1R0NF 1ME4018-1R5NF 1.0 1.5 ±30% ±30% 0.025 0.030 0.033 0.039 2.00 1.80 4.80 3.35 B B 1ME4018-2R2MF 2.2 ±20% 0.045 0.059 1.65 2.70 B 1ME4018-3R3MF 3.3 ±20% 0.070 0.091 1.23 2.45 B 1ME4018-4R7MF 4.7 ±20% 0.090 0.117 1.20 1.70 B 1ME4018-6R8MF 6.8 ±20% 0.110 0.143 1.06 1.45 B 1ME4018-100MF 10 ±20% 0.180 0.234 0.84 1.30 B 1ME4018-150MF 15 ±20% 0.250 0.325 0.65 0.94 B 1ME4018-220MF 22 ±20% 0.360 0.468 0.59 0.80 B 1ME4018-330MF 33 ±20% 0.530 0.689 0.49 0.56 B 1ME4018-470MF 47 ±20% 0.650 0.845 0.42 0.57 B 1ME4018-680MF 68 ±20% 1.000 1.300 0.32 0.47 B 1ME4018-101MF 100 ±20% 1.750 2.275 0.25 0.40 B 1ME4018-151MF 150 ±20% 2.500 3.250 0.22 0.31 B 1ME4018-221MF 220 ±20% 4.000 5.200 0.17 0.27 B 1ME4020-1R0NF 1ME4020-1R2NF 1 1.2 ±30% ±30% 0.029 0.029 0.038 0.038 2.15 2.15 4.78 5.10 B B 1ME4020-1R5NF 1.5 ±30% 0.035 0.046 1.98 4.45 B 1ME4020-2R2NF 2.2 ±30% 0.040 0.052 1.85 3.40 B 1ME4020-3R3MF 3.3 ±20% 0.070 0.091 1.40 3.20 B 1ME4020-3R6MF 3.6 ±20% 0.055 0.072 1.54 2.80 B 1ME4020-4R7MF 4.7 ±20% 0.075 0.098 1.34 2.35 B 1ME4020-5R1MF 5.1 ±20% 0.085 0.111 1.27 2.30 B 1ME4020-5R6MF 5.6 ±20% 0.090 0.117 1.22 2.20 B 1ME4020-6R2MF 6.2 ±20% 0.115 0.150 1.08 2.15 B 1ME4020-6R8MF 6.8 ±20% 0.125 0.163 1.04 2.20 B 1ME4020-7R5MF 7.5 ±20% 0.115 0.150 1.08 1.85 B 1ME4020-8R2MF 8.2 ±20% 0.125 0.163 1.04 1.75 B 1ME4020-100MF 10 ±20% 0.165 0.215 0.90 1.60 B Accetek Electronics (Shenzhen) Co., Ltd. 28 www.accetek.com Catalog-Power Inductor-2015A 1ME Series Low Profile Shielded Power Inductor Accetek Inductance1 DCR2 Irms3 Isat4 Drawing Fig. Part Number μH Tolerance Typ.(Ω) Max.(Ω) A A 1ME4020-120MF 12 ±20% 0.175 0.228 0.88 1.50 B 1ME4020-150MF 15 ±20% 0.230 0.299 0.77 1.35 B 1ME4020-220MF 22 ±20% 0.350 0.455 0.62 1.05 B 1ME4020-270MF 27 ±20% 0.545 0.709 0.50 1.02 B 1ME4020-330MF 33 ±20% 0.550 0.715 0.49 0.85 B 1ME4020-390MF 39 ±20% 0.650 0.845 0.46 0.82 B 1ME4020-430MF 43 ±20% 0.660 0.858 0.45 0.77 B 1ME4020-470MF 47 ±20% 0.710 0.923 0.44 0.74 B 1ME4020-510MF 51 ±20% 0.750 0.975 0.42 0.70 B 1ME4020-560MF 56 ±20% 0.800 1.040 0.41 0.66 B 1ME4020-620MF 62 ±20% 0.900 1.170 0.39 0.65 B 1ME4020-680MF 68 ±20% 1.060 1.378 0.36 0.61 B 1ME4020-750MF 75 ±20% 1.160 1.508 0.35 0.70 B 1ME4020-820MF 82 ±20% 1.170 1.521 0.34 0.50 B 1ME4020-101MF 100 ±20% 1.550 2.015 0.31 0.48 B 1ME4026-1R2NF 1ME4026-1R5NF 1.2 1.5 ±30% ±30% 0.030 0.030 0.039 0.039 2.30 2.30 3.10 2.40 B B 1ME4026-2R2MF 2.2 ±20% 0.040 0.052 2.00 2.10 B 1ME4026-3R3MF 3.3 ±20% 0.050 0.065 1.70 1.80 B 1ME4026-4R7MF 4.7 ±20% 0.055 0.072 1.60 1.45 B 1ME4026-6R8MF 6.8 ±20% 0.065 0.085 1.50 1.30 B 1ME4026-100MF 10 ±20% 0.085 0.111 1.30 1.00 B 1ME4026-150MF 15 ±20% 0.110 0.143 1.10 0.90 B 1ME4026-220MF 22 ±20% 0.165 0.215 0.90 0.60 B 1ME4026-330MF 33 ±20% 0.270 0.351 0.70 0.55 B 1ME4026-470MF 47 ±20% 0.300 0.390 0.65 0.40 B 1ME4030-R91NF 1ME4030-1R2NF 0.91 1.2 ±30% ±30% 0.013 0.015 0.017 0.020 4.00 3.82 6.25 5.80 B B 1ME4030-1R5NF 1.5 ±30% 0.020 0.026 3.34 4.84 B 1ME4030-1R8NF 1.8 ±30% 0.028 0.036 3.00 4.80 B 1ME4030-2R2NF 2.2 ±30% 0.030 0.039 2.95 4.40 B 1ME4030-3R3MF 3.3 ±20% 0.040 0.052 2.40 3.30 B 1ME4030-4R3MF 4.3 ±20% 0.055 0.072 2.10 2.95 B 1ME4030-4R7MF 4.7 ±20% 0.060 0.078 2.00 2.90 B 1ME4030-5R6MF 5.6 ±20% 0.065 0.085 1.95 2.60 B 1ME4030-6R8MF 6.8 ±20% 0.090 0.117 1.60 2.75 B 1ME4030-7R5MF 7.5 ±20% 0.085 0.111 1.65 2.20 B 1ME4030-8R2MF 8.2 ±20% 0.090 0.117 1.60 2.10 B 1ME4030-100MF 10 ±20% 0.100 0.130 1.50 1.95 B 1ME4030-120MF 12 ±20% 0.135 0.176 1.30 1.70 B 1ME4030-150MF 15 ±20% 0.190 0.247 1.11 1.65 B 1ME4030-180MF 18 ±20% 0.200 0.260 1.10 1.40 B 1ME4030-220MF 22 ±20% 0.225 0.293 1.00 1.30 B 1ME4030-330MF 33 ±20% 0.330 0.429 0.84 1.10 B 1ME4030-360MF 36 ±20% 0.335 0.436 0.83 1.05 B 1ME4030-390MF 39 ±20% 0.435 0.566 0.73 1.03 B 1ME4030-470MF 47 ±20% 0.445 0.579 0.72 0.95 B 1ME4030-510MF 51 ±20% 0.470 0.611 0.70 0.90 B 1ME4030-560MF 56 ±20% 0.555 0.722 0.65 0.85 B 1ME4030-620MF 62 ±20% 0.585 0.761 0.63 0.80 B 1ME4030-680MF 68 ±20% 0.868 1.128 0.52 0.72 B 1ME4030-750MF 75 ±20% 1.020 1.326 0.48 0.70 B 1ME4030-820MF 82 ±20% 1.060 1.378 0.47 0.66 B 1ME4030-910MF 91 ±20% 1.100 1.430 0.46 0.65 B 1ME4030-101MF 100 ±20% 1.150 1.495 0.45 0.60 B 1ME4030-121MF 120 ±20% 1.350 1.755 0.42 0.55 B 1ME4030-151MF 150 ±20% 1.800 2.340 0.30 0.50 B Accetek Electronics (Shenzhen) Co., Ltd. www.accetek.com Catalog-Power Inductor-2015A 29 1ME Series Low Profile Shielded Power Inductor Accetek Inductance1 DCR2 Irms3 Isat4 Drawing Part Number μH Tolerance Typ.(Ω) Max.(Ω) A A Fig. 1ME4030-471MF 470 ±20% 7.200 9.360 0.20 0.30 B 1ME4030-681MF 680 ±20% 7.580 9.854 0.14 0.19 B 1ME5012-1R0NF 1ME5012-1R5NF 1.0 1.5 ±30% ±30% 0.057 0.072 0.074 0.094 2.40 2.25 4.40 3.70 C C 1ME5012-2R2NF 2.2 ±30% 0.090 0.117 2.00 3.10 C 1ME5012-3R3NF 3.3 ±30% 0.126 0.164 1.70 2.45 C 1ME5012-4R7NF 4.7 ±30% 0.164 0.213 1.50 2.20 C 1ME5012-6R8MF 6.8 ±20% 0.245 0.319 1.25 1.75 C 1ME5012-100MF 10 ±20% 0.344 0.447 1.05 1.40 C 1ME5012-150MF 15 ±20% 0.436 0.567 0.92 1.25 C 1ME5012-220MF 22 ±20% 0.858 1.115 0.60 0.88 C 1ME5020-R47NF 1ME5020-R75NF 0.47 0.75 ±30% ±30% 0.013 0.017 0.017 0.022 4.60 4.00 6.15 5.50 C C 1ME5020-1R0NF 1.0 ±30% 0.020 0.026 3.80 4.10 C 1ME5020-1R2NF 1.2 ±30% 0.022 0.029 3.55 4.50 C 1ME5020-1R5NF 1.5 ±30% 0.026 0.034 3.20 4.10 C 1ME5020-2R2NF 2.2 ±30% 0.032 0.042 2.90 3.20 C 1ME5020-2R7NF 2.7 ±30% 0.038 0.049 2.70 2.90 C 1ME5020-3R0NF 3.0 ±30% 0.038 0.049 2.70 2.55 C 1ME5020-3R3NF 3.3 ±30% 0.043 0.056 2.50 2.55 C 1ME5020-3R6NF 3.6 ±30% 0.043 0.056 2.50 2.80 C 1ME5020-3R9NF 3.9 ±30% 0.043 0.056 2.50 2.30 C 1ME5020-4R3MF 4.3 ±20% 0.057 0.074 2.20 2.50 C 1ME5020-4R7MF 4.7 ±20% 0.057 0.074 2.20 2.50 C 1ME5020-5R1MF 5.1 ±20% 0.064 0.083 2.05 2.25 C 1ME5020-5R6MF 5.6 ±20% 0.064 0.083 2.05 2.30 C 1ME5020-6R8MF 6.8 ±20% 0.083 0.108 1.80 2.05 C 1ME5020-7R5MF 7.5 ±20% 0.090 0.117 1.75 1.85 C 1ME5020-8R2MF 8.2 ±20% 0.098 0.127 1.65 1.85 C 1ME5020-9R1MF 9.1 ±20% 0.110 0.143 1.55 1.70 C 1ME5020-100MF 10 ±20% 0.110 0.143 1.55 1.70 C 1ME5020-120MF 12 ±20% 0.140 0.182 1.40 1.50 C 1ME5020-150MF 15 ±20% 0.165 0.215 1.25 1.35 C 1ME5020-180MF 18 ±20% 0.200 0.260 1.15 1.25 C 1ME5020-220MF 22 ±20% 0.226 0.294 1.10 1.15 C 1ME5020-330MF 33 ±20% 0.390 0.507 0.90 0.92 C 1ME5020-470MF 47 ±20% 0.523 0.679 0.77 0.77 C 1ME5020-560MF 56 ±20% 0.630 0.819 0.70 0.77 C 1ME5020-101MF 100 ±20% 1.100 1.430 0.53 0.53 C 1ME5040-1R0NF 1ME5040-1R5NF 1.0 1.5 ±30% ±30% 0.012 0.015 0.016 0.020 4.90 4.30 7.35 6.30 C C 1ME5040-2R2NF 2.2 ±30% 0.019 0.025 3.80 4.90 C 1ME5040-2R7NF 2.7 ±30% 0.022 0.029 3.60 4.30 C 1ME5040-3R3NF 3.3 ±30% 0.024 0.031 3.40 3.95 C 1ME5040-3R9NF 3.9 ±30% 0.027 0.035 3.20 3.55 C 1ME5040-4R7NF 4.7 ±30% 0.030 0.039 3.00 3.50 C 1ME5040-6R8MF 6.8 ±20% 0.043 0.056 2.50 2.90 C 1ME5040-100MF 10 ±20% 0.064 0.083 2.10 2.35 C 1ME5040-150MF 15 ±20% 0.086 0.112 2.00 2.00 C 1ME5040-220MF 22 ±20% 0.129 0.168 1.50 1.60 C 1ME5040-330MF 33 ±20% 0.188 0.244 1.20 1.30 C 1ME5040-470MF 47 ±20% 0.272 0.354 1.00 1.10 C 1ME5040-680MF 68 ±20% 0.400 0.520 0.80 0.90 C 1ME5040-101MF 100 ±20% 0.560 0.728 0.70 0.75 C 1ME5040-151MF 150 ±20% 0.750 0.975 0.60 0.65 C 1ME6020-R50NF 1ME6020-R68NF 0.50 0.68 ±30% ±30% 0.014 0.017 0.018 0.022 3.30 3.80 4.50 6.55 B B Accetek Electronics (Shenzhen) Co., Ltd. 30 www.accetek.com Catalog-Power Inductor-2015A 1ME Series Low Profile Shielded Power Inductor Accetek Inductance1 DCR2 Irms3 Isat4 Drawing Fig. Part Number μH Tolerance Typ.(Ω) Max.(Ω) A A 1ME6020-R82NF 0.82 ±30% 0.017 0.022 3.80 5.30 B 1ME6020-1R0NF 1.0 ±30% 0.020 0.026 3.50 4.15 B 1ME6020-1R2NF 1.2 ±30% 0.022 0.029 3.20 5.90 B 1ME6020-1R5NF 1.5 ±30% 0.022 0.029 3.20 4.25 B 1ME6020-1R8NF 1.8 ±30% 0.028 0.036 2.75 4.85 B 1ME6020-2R0NF 2.0 ±30% 0.035 0.046 2.60 4.10 B 1ME6020-2R2NF 2.2 ±30% 0.028 0.036 3.75 3.75 B 1ME6020-2R7NF 2.7 ±30% 0.035 0.046 2.60 3.90 B 1ME6020-3R3NF 3.3 ±30% 0.035 0.046 2.60 3.15 B 1ME6020-3R9NF 3.9 ±30% 0.049 0.064 2.10 3.25 B 1ME6020-4R3NF 4.3 ±30% 0.049 0.064 2.10 2.70 B 1ME6020-4R7NF 4.7 ±30% 0.058 0.075 2.00 3.00 B 1ME6020-5R6NF 5.6 ±30% 0.058 0.075 1.90 2.40 B 1ME6020-6R2NF 6.2 ±30% 0.079 0.103 1.80 2.30 B 1ME6020-6R8NF 6.8 ±30% 0.079 0.103 1.80 2.20 B 1ME6020-8R2NF 8.2 ±30% 0.105 0.137 1.40 2.10 B 1ME6020-100MF 10 ±20% 0.105 0.137 1.40 1.75 B 1ME6020-120MF 12 ±20% 0.120 0.156 1.30 1.45 B 1ME6020-150MF 15 ±20% 0.145 0.189 1.20 1.20 B 1ME6020-180MF 18 ±20% 0.180 0.234 1.08 1.20 B 1ME6020-220MF 22 ±20% 0.204 0.265 1.00 1.05 B 1ME6020-330MF 33 ±20% 0.300 0.390 0.84 0.95 B 1ME6020-470MF 47 ±20% 0.430 0.559 0.70 0.80 B 1ME6020-331MF 330 ±20% 2.630 3.419 0.33 0.27 B 1ME6028-1R0NF 1ME6028-1R5NF 1.0 1.5 ±30% ±30% 0.010 0.013 0.013 0.017 5.20 4.58 5.75 6.00 B B 1ME6028-2R2NF 2.2 ±30% 0.020 0.026 3.75 5.10 B 1ME6028-2R7NF 2.7 ±30% 0.020 0.026 3.75 3.80 B 1ME6028-3R3NF 3.3 ±30% 0.025 0.033 3.48 4.15 B 1ME6028-4R7NF 4.7 ±30% 0.030 0.039 3.08 3.00 B 1ME6028-5R1NF 5.1 ±30% 0.043 0.056 2.60 3.20 B 1ME6028-6R2MF 6.2 ±20% 0.047 0.061 2.40 3.05 B 1ME6028-6R8MF 6.8 ±20% 0.047 0.061 2.40 2.60 B 1ME6028-8R2MF 8.2 ±20% 0.055 0.072 2.25 2.30 B 1ME6028-9R1MF 9.1 ±20% 0.074 0.096 2.15 2.55 B 1ME6028-100MF 10 ±20% 0.072 0.094 1.95 2.04 B 1ME6028-120MF 12 ±20% 0.080 0.104 1.85 1.80 B 1ME6028-150MF 15 ±20% 0.125 0.163 1.45 1.75 B 1ME6028-180MF 18 ±20% 0.120 0.156 1.45 1.52 B 1ME6028-220MF 22 ±20% 0.140 0.182 1.40 1.45 B 1ME6028-270MF 27 ±20% 0.155 0.202 1.32 1.50 B 1ME6028-330MF 33 ±20% 0.185 0.241 1.22 1.35 B 1ME6028-360MF 36 ±20% 0.215 0.280 1.13 1.25 B 1ME6028-390MF 39 ±20% 0.225 0.293 1.10 1.25 B 1ME6028-470MF 47 ±20% 0.315 0.410 1.06 1.15 B 1ME6028-680MF 68 ±20% 0.350 0.455 0.86 0.90 B 1ME6028-750MF 75 ±20% 0.410 0.533 0.81 0.90 B 1ME6028-820MF 82 ±20% 0.500 0.650 0.70 0.80 B 1ME6028-101MF 100 ±20% 0.500 0.650 0.70 0.65 B 1ME6045-R82NF 1ME6045-1R0NF 0.82 1.00 ±30% ±30% 0.008 0.011 0.010 0.014 5.90 5.14 10.40 9.85 B B 1ME6045-1R2NF 1.20 ±30% 0.010 0.013 5.40 8.35 B 1ME6045-1R5NF 1.50 ±30% 0.012 0.016 4.95 8.80 B 1ME6045-1R8NF 1.80 ±30% 0.012 0.016 4.95 7.60 B 1ME6045-2R2NF 2.20 ±30% 0.014 0.018 4.60 6.75 B 1ME6045-2R3NF 2.30 ±30% 0.021 0.027 3.50 6.00 B 1ME6045-2R7NF 2.70 ±30% 0.015 0.020 4.30 5.75 B Accetek Electronics (Shenzhen) Co., Ltd. www.accetek.com Catalog-Power Inductor-2015A 31 1ME Series Low Profile Shielded Power Inductor Accetek Inductance1 DCR2 Irms3 Isat4 Drawing Fig. Part Number μH Tolerance Typ.(Ω) Max.(Ω) A A 1ME6045-3R0NF 3.00 ±30% 0.020 0.026 3.80 5.60 B 1ME6045-3R3NF 3.30 ±30% 0.021 0.027 3.70 5.90 B 1ME6045-3R6NF 3.60 ±30% 0.021 0.027 3.70 5.25 B 1ME6045-4R3MF 4.30 ±20% 0.023 0.030 3.50 4.45 B 1ME6045-4R7MF 4.70 ±20% 0.026 0.034 3.30 4.97 B 1ME6045-5R1MF 5.10 ±20% 0.026 0.034 3.30 4.40 B 1ME6045-5R6MF 5.60 ±20% 0.029 0.038 3.15 4.15 B 1ME6045-6R2MF 6.20 ±20% 0.031 0.040 3.00 4.43 B 1ME6045-6R8MF 6.80 ±20% 0.031 0.040 3.00 3.90 B 1ME6045-7R5MF 7.50 ±20% 0.034 0.044 2.90 3.50 B 1ME6045-8R2MF 8.20 ±20% 0.043 0.056 2.60 3.90 B 1ME6045-9R1MF 9.10 ±20% 0.043 0.056 2.60 3.35 B 1ME6045-100MF 10.0 ±20% 0.048 0.062 2.45 3.20 B 1ME6045-120MF 12.0 ±20% 0.058 0.075 2.20 2.80 B 1ME6045-150MF 15.0 ±20% 0.068 0.088 2.05 2.50 B 1ME6045-180MF 18.0 ±20% 0.081 0.105 1.85 2.20 B 1ME6045-220MF 22.0 ±20% 0.089 0.116 1.80 2.05 B 1ME6045-270MF 27.0 ±20% 0.102 0.133 1.65 1.90 B 1ME6045-300MF 30.0 ±20% 0.132 0.172 1.50 1.70 B 1ME6045-330MF 33.0 ±20% 0.137 0.178 1.45 1.65 B 1ME6045-360MF 36.0 ±20% 0.173 0.225 1.40 1.62 B 1ME6045-390MF 39.0 ±20% 0.180 0.234 1.25 1.50 B 1ME6045-430MF 43.0 ±20% 0.200 0.260 1.20 1.63 B 1ME6045-470MF 47.0 ±20% 0.200 0.260 1.20 1.40 B 1ME6045-510MF 51.0 ±20% 0.207 0.269 1.15 1.35 B 1ME6045-560MF 56.0 ±20% 0.221 0.287 1.10 1.30 B 1ME6045-620MF 62.0 ±20% 0.235 0.306 1.10 1.25 B 1ME6045-680MF 68.0 ±20% 0.289 0.376 1.00 1.20 B 1ME6045-750MF 75.0 ±20% 0.305 0.397 0.95 1.15 B 1ME6045-820MF 82.0 ±20% 0.341 0.443 0.90 1.05 B 1ME6045-910MF 91.0 ±20% 0.359 0.467 0.85 1.00 B 1ME6045-101MF 100.0 ±20% 0.433 0.563 0.80 0.95 B 1ME6045-121MF 120.0 ±20% 0.484 0.629 0.77 0.85 B 1ME6045-151MF 150.0 ±20% 0.580 0.754 0.70 0.80 B 1ME6045-221MF 220.0 ±20% 0.834 1.084 0.59 0.70 B 1ME6045-331MF 330.0 ±20% 1.270 1.651 0.57 0.57 B 1ME8040-R82NF 1ME8040-1R0NF 0.82 1.00 ±30% ±30% 0.008 0.008 0.010 0.010 6.30 6.30 13.80 9.85 B B 1ME8040-1R5NF 1.50 ±30% 0.010 0.013 5.65 8.15 B 1ME8040-2R0NF 2.00 ±30% 0.012 0.016 5.15 9.25 B 1ME8040-2R2NF 2.20 ±30% 0.012 0.016 5.15 7.10 B 1ME8040-3R0NF 3.00 ±30% 0.014 0.018 4.70 6.10 B 1ME8040-3R3NF 3.30 ±30% 0.017 0.022 4.40 6.50 B 1ME8040-3R6NF 3.60 ±30% 0.017 0.022 4.35 7.52 B 1ME8040-3R9NF 3.90 ±30% 0.017 0.022 4.35 5.75 B 1ME8040-4R7NF 4.70 ±30% 0.019 0.025 4.10 5.90 B 1ME8040-5R1NF 5.10 ±30% 0.019 0.025 4.05 4.70 B 1ME8040-5R6NF 5.60 ±30% 0.021 0.027 3.85 6.00 B 1ME8040-6R2NF 6.20 ±30% 0.021 0.027 3.85 4.45 B 1ME8040-6R8MF 6.80 ±20% 0.024 0.031 3.60 4.55 B 1ME8040-8R2MF 8.20 ±20% 0.026 0.034 3.45 4.20 B 1ME8040-100MF 10.0 ±20% 0.029 0.038 3.30 3.60 B 1ME8040-150MF 15.0 ±20% 0.047 0.061 2.60 2.95 B 1ME8040-180MF 18.0 ±20% 0.053 0.069 2.40 2.70 B 1ME8040-220MF 22.0 ±20% 0.069 0.090 2.10 2.40 B 1ME8040-270MF 27.0 ±20% 0.078 0.101 2.00 2.15 B 1ME8040-330MF 33.0 ±20% 0.097 0.126 1.80 2.05 B Accetek Electronics (Shenzhen) Co., Ltd. 32 www.accetek.com Catalog-Power Inductor-2015A 1ME Series Low Profile Shielded Power Inductor Accetek Inductance1 DCR2 Irms3 Isat4 Drawing Fig. Part Number μH Tolerance Typ.(Ω) Max.(Ω) A A 1ME8040-360MF 36.0 ±20% 0.102 0.133 1.75 2.00 B 1ME8040-390MF 39.0 ±20% 0.107 0.139 1.70 1.95 B 1ME8040-430MF 43.0 ±20% 0.113 0.147 1.65 1.90 B 1ME8040-470MF 47.0 ±20% 0.136 0.177 1.55 1.75 B 1ME8040-510MF 51.0 ±20% 0.142 0.185 1.50 1.70 B 1ME8040-560MF 56.0 ±20% 0.148 0.192 1.45 1.55 B 1ME8040-620MF 62.0 ±20% 0.182 0.237 1.30 1.50 B 1ME8040-680MF 68.0 ±20% 0.196 0.255 1.25 1.45 B 1ME8040-750MF 75.0 ±20% 0.211 0.274 1.20 1.35 B 1ME8040-820MF 82.0 ±20% 0.225 0.293 1.15 1.30 B 1ME8040-910MF 91.0 ±20% 0.272 0.354 1.05 1.20 B 1ME8040-101MF 100.0 ±20% 0.290 0.377 1.00 1.15 B 1ME8040-121MF 120.0 ±20% 0.334 0.434 0.95 1.05 B 1ME8040-151MF 150.0 ±20% 0.410 0.533 0.85 1.10 B 1ME8040-221MF 220.0 ±20% 0.599 0.779 0.80 0.85 B 1ME8040-331MF 330.0 ±20% 0.889 1.156 0.64 0.68 B 1. 2. 3. 4. 5. Inductance measured @ 100KHz, 0.3V at 25°C temperature. DCR measured @ 25°C. Irms for an approximate 40°C rise from 20°C ambient temperature. Isat for approximate 30% L roll off at 25°C. Specifications subject to change without notice please check our website for latest information. Accetek Electronics (Shenzhen) Co., Ltd. www.accetek.com Catalog-Power Inductor-2015A 33 1ME Series Low Profile Shielded Power Inductor Accetek E TAPE AND REEL SPECIFICATIONS D B W P1 T E Case Size Parts per Reel 1ME252010 1ME252012 Reel Dimensions(REF) Tape Dimensions(REF) A B C D E W P P0 P1 H T 2000 178 58 13 13 9.0 8 4 4 2 1.2 0.3 2000 178 58 13 13 9.0 8 4 4 2 1.4 0.3 1ME3010 2000 178 58 13 13 9.0 8 4 4 2 1.4 0.3 1ME3012 2000 178 58 13 13 9.0 8 4 4 2 1.6 0.3 1ME3015 2000 178 58 13 13 9.0 8 4 4 2 1.9 0.3 1ME4010 4500 330 100 13 19 12.4 12 8 4 2 1.6 0.3 1ME4012 4500 330 100 13 19 12.4 12 8 4 2 1.6 0.3 1ME4018 3000 330 100 13 19 12.4 12 8 4 2 2.4 0.3 1ME4020 3000 330 100 13 19 12.4 12 8 4 2 2.4 0.3 1ME4026 2000 330 100 13 19 12.4 12 8 4 2 3.4 0.3 1ME4030 2000 330 100 13 19 12.4 12 8 4 2 3.4 0.3 1ME5012 4000 330 100 13 22 12.4 12 8 4 2 1.6 0.3 1ME5020 2500 330 100 13 22 12.4 12 8 4 2 3.0 0.3 1ME5040 1500 330 100 13 22 12.4 12 8 4 2 4.4 0.3 1ME6020 2500 330 100 13 22 12.4 12 8 4 2 2.5 0.4 1ME6028 2000 330 100 13 19 12.4 12 8 4 2 3.3 0.4 1ME6045 1500 330 100 13 19 12.4 12 8 4 2 4.7 0.4 1ME8040 1000 330 100 13 22 16.4 16 12 4 2 4.4 0.4 Accetek Electronics (Shenzhen) Co., Ltd. 34 H 220 A C P0 P www.accetek.com Catalog-Power Inductor-2015A 1ME-H Series Low Profile Shielded Power Inductor Accetek A FEATURES Nearly 30% lower DCR than 1ME series and higher current rating Magnetic epoxy shielded construction reduces 30% or more component volume Shielded construction reduces leakage flux and EMI Metallization on ferrite core results in excellent shock resistance and damage-free durability 30% higher current rating than conventional inductors of equal size Save PCB real estate and save more power Operating Temperature range from -40°C to +125°C (Including Self-heating) 260°C reflow peak temperature qualified B PART NUMBER SYSTEM 1ME 3010 ❶ ❷ - 100 M F ❸ ❹ ❺ ❶ Series 1ME Series Code Dimension Code (L*W*H) (mm) ❷ 201610(2.0×1.6×1.0 252010(2.5×2.0×1.0) 252012(2.5×2.0×1.2) 3012(3.0×3.0×1.2) ❸ Inductance Code 3015(3.0×3.0×1.5) 4012(4.0×4.0×1.2) e.g. Calculation 4018(4.0×4.0×1.8) 8040(8.0×8.0×3.0) 2R2 2.2μH 101 1 10×10 μH = 100μH ❹ Inductance Tolerance M ±20% N ±30% C ❺ RoHS Compliant DRAWINGS AND DIMENSIONS Fig.A – 1ME20xx, 2520xx A D C H B E I F J E I A xxx B Fig.B - 1ME30xx,40xx,60xx,80xx C D H E I F J E I Land Pattern Land Pattern Schematic 1 2 XXX = Inductance value Accetek Electronics (Shenzhen) Co., Ltd. www.accetek.com Catalog-Power Inductor-2015A 35 1ME-H Series Low Profile Shielded Power Inductor Accetek Case Size Dimensions (mm) Fig. A B Cmax D E F Href. Iref. Jref. 1ME201610H 2.0±0.2 1.6±0.2 1.0 1.2±0.2 0.6±0.2 0.8±0.2 1.7 0.7 0.7 1ME252010H 2.5±0.1 2.0±0.1 1.0 1.5±0.2 0.8±0.2 0.8±0.2 2.0 0.85 0.8 A 1ME252012H 2.5±0.1 2.0±0.1 1.2 1.5±0.2 0.8±0.2 0.8±0.2 2.0 0.85 0.8 A 1ME3012H 3.0±0.2 3.0±0.2 1.2 2.5±0.2 0.75±0.2 1.5±0.2 2.7 0.8 1.5 B 1ME3015H 3.0±0.2 3.0±0.2 1.5 2.5±0.2 0.75±0.2 1.5±0.2 2.7 0.8 1.5 B 1ME4012H 4.0±0.2 4.0±0.2 1.2 3.3±0.2 0.95±0.2 2.1±0.2 3.7 1.1 1.9 B 1ME4018H 4.0±0.2 4.0±0.2 1.8 3.3±0.2 0.95±0.2 2.1±0.2 3.7 1.1 1.9 B 1ME8040H 8.0±0.3 8.0±0.3 4.0 6.3±0.2 2.00±0.3 4.0±0.2 7.5 2.2 3.8 B D SPECIFICATIONS Inductance DCR Part Number μH Tolerance Typ.(Ω) Max.(Ω) Irms(A) Isat(A) 1ME201610H-R16MF 0.16 ±20% 0.026 0.031 3.50 4.80 1ME201610H-R24MF 0.24 ±20% 0.033 0.040 3.20 4.10 1ME201610H-R33MF 0.33 ±20% 0.033 0.040 3.20 3.10 1ME201610H-R47MF 0.47 ±20% 0.049 0.059 2.60 2.85 1ME201610H-R68MF 0.68 ±20% 0.063 0.076 2.25 2.45 1ME201610H-1R0MF 1.0 ±20% 0.095 0.114 1.60 1.85 1ME201610H-1R5MF 1.5 ±20% 0.145 0.174 1.40 1.65 1ME201610H-2R2MF 2.2 ±20% 0.220 0.264 1.20 1.45 1ME201610H-3R3MF 3.3 ±20% 0.279 0.335 0.98 1.05 1ME201610H-4R7MF 4.7 ±20% 0.399 0.479 0.82 0.85 1ME201610H-6R8MF 6.8 ±20% 0.680 0.816 0.58 0.70 1ME201610H-100MF 10.0 ±20% 0.850 1.020 0.50 0.55 1ME252010H-R24MF 1ME252010H-R33MF 0.24 0.33 ±20% ±20% 0.028 0.036 0.034 0.043 3.00 2.65 4.50 4.40 1ME252010H-R47MF 0.47 ±20% 0.037 0.044 2.65 3.50 1ME252010H-R68MF 0.68 ±20% 0.051 0.061 2.35 3.10 1ME252010H-1R0MF 1.0 ±20% 0.067 0.080 2.00 2.45 1ME252010H-1R5MF 1.5 ±20% 0.090 0.108 1.70 2.05 1ME252010H-2R2MF 2.2 ±20% 0.114 0.137 1.55 1.80 1ME252010H-3R3MF 3.3 ±20% 0.170 0.228 1.20 1.40 1ME252010H-4R7MF 4.7 ±20% 0.269 0.323 1.00 1.15 1ME252010H-6R8MF 6.8 ±20% 0.376 0.451 0.84 0.95 1ME252010H-100MF 10.0 ±20% 0.487 0.584 0.74 0.75 1ME252010H-150MF 15.0 ±20% 0.795 0.954 0.55 0.65 1ME252010H-220MF 22.0 ±20% 1.290 1.548 0.45 0.55 1ME252012H-R16MF 1ME252012H-R24MF 0.16 0.24 ±20% ±20% 0.018 0.018 0.022 0.022 4.50 4.50 7.20 4.75 1ME252012H-R33MF 0.33 ±20% 0.024 0.029 3.70 4.70 1ME252012H-R47MF 0.47 ±20% 0.030 0.036 3.30 4.10 1ME252012H-R68MF 0.68 ±20% 0.051 0.061 2.30 3.30 1ME252012H-1R0MF 1.0 ±20% 0.037 0.044 2.40 1.90 1ME252012H-1R2MF 1.2 ±20% 0.065 0.078 2.10 2.50 1ME252012H-1R5MF 1.5 ±20% 0.065 0.078 2.10 2.35 1ME252012H-2R2MF 2.2 ±20% 0.080 0.096 1.95 1.95 1ME252012H-3R3MF 3.3 ±20% 0.120 0.144 1.50 1.25 1ME252012H-4R7MF 4.7 ±20% 0.175 0.210 1.25 1.20 1ME252012H-6R8MF 6.8 ±20% 0.300 0.360 1.05 1.00 1ME252012H-100MF 10.0 ±20% 0.435 0.522 0.87 0.85 1ME252012H-150MF 15.0 ±20% 0.830 1.000 0.63 0.75 1ME252012H-180MF 18.0 ±20% 0.830 1.000 0.63 0.65 1ME252012H-220MF 22.0 ±20% 0.910 1.090 0.60 0.55 Accetek Electronics (Shenzhen) Co., Ltd. 36 A www.accetek.com Catalog-Power Inductor-2015A 1ME-H Series Low Profile Shielded Power Inductor Accetek Inductance DCR Part Number μH Tolerance Typ.(Ω) Max.(Ω) Irms(A) Isat(A) 1ME252012H-330MF 33.0 ±20% 1.530 1.840 0.46 0.40 1ME252012H-470MF 47.0 ±20% 1.850 2.220 0.35 0.30 1ME3012H-1R0MF 1ME3012H-2R2MF 1.0 2.2 ±20% ±20% 0.032 0.075 0.040 0.090 2.50 1.60 2.50 1.80 1ME3012H-3R3MF 3.3 ±20% 0.112 0.134 1.60 1.55 1ME3012H-100MF 10.0 ±20% 0.310 0.372 0.80 0.90 1ME3012H-220MF 22.0 ±20% 0.700 0.840 0.55 0.60 1ME3015H-R47MF 1ME3015H-1R0MF 0.47 1.0 ±20% ±20% 0.018 0.033 0.022 0.040 3.50 2.50 3.00 2.80 1ME3015H-1R5MF 1.5 ±20% 0.040 0.048 2.30 2.30 1ME3015H-2R2MF 2.2 ±20% 0.050 0.060 2.05 1.70 1ME3015H-3R3MF 3.3 ±20% 0.070 0.084 1.70 1.50 1ME3015H-4R7MF 4.7 ±20% 0.096 0.115 1.50 1.20 1ME3015H-6R8MF 6.8 ±20% 0.120 0.144 1.35 0.90 1ME3015H-100MF 10.0 ±20% 0.230 0.276 0.97 0.90 1ME3015H-150MF 15.0 ±20% 0.300 0.360 0.84 0.70 1ME3015H-220MF 22.0 ±20% 0.450 0.540 0.70 0.60 1ME3015H-330MF 33.0 ±20% 0.910 1.090 0.55 0.55 1ME3015H-470MF 47.0 ±20% 1.040 1.250 0.50 0.42 1ME4012H-R47NF 1ME4012H-R82NF 0.47 0.82 ±30% ±30% 0.027 0.035 0.032 0.042 3.20 2.90 4.20 3.50 1ME4012H-1R0NF 1 ±30% 0.042 0.050 2.50 3.30 1ME4012H-1R5NF 1.5 ±30% 0.042 0.050 2.50 2.40 1ME4012H-1R8NF 1.8 ±30% 0.055 0.660 2.30 2.20 1ME4012H-2R2MF 2.2 ±20% 0.055 0.066 2.30 2.20 1ME4012H-2R7MF 2.7 ±20% 0.070 0.084 2.00 1.80 1ME4012H-3R3MF 3.3 ±20% 0.070 0.084 2.00 1.70 1ME4012H-3R6MF 3.6 ±20% 0.075 0.090 2.00 1.60 1ME4012H-4R3MF 4.3 ±20% 0.090 0.108 1.80 1.50 1ME4012H-4R7MF 4.7 ±20% 0.090 0.108 1.80 1.40 1ME4012H-5R1MF 5.1 ±20% 0.110 0.132 1.60 1.40 1ME4012H-5R6MF 5.6 ±20% 0.110 0.132 1.60 1.30 1ME4012H-6R8MF 6.8 ±20% 0.125 0.150 1.60 1.10 1ME4012H-100MF 10.0 ±20% 0.170 0.204 1.30 0.90 1ME4012H-120MF 12.0 ±20% 0.260 0.312 1.00 1.00 1ME4012H-150MF 15.0 ±20% 0.260 0.312 1.00 0.80 1ME4012H-180MF 18.0 ±20% 0.360 0.432 0.90 0.80 1ME4012H-220MF 22.0 ±20% 0.380 0.460 0.90 0.65 1ME4012H-270MF 27.0 ±20% 0.560 0.672 0.73 0.60 1ME4012H-330MF 33.0 ±20% 0.630 0.756 0.68 0.55 1ME4012H-360MF 36.0 ±20% 0.630 0.756 0.68 0.50 1ME4012H-390MF 39.0 ±20% 0.990 1.188 0.54 0.62 1ME4012H-470MF 47.0 ±20% 0.990 1.188 0.54 0.50 1ME4012H-560MF 56.0 ±20% 1.100 1.320 0.52 0.45 1ME4012H-680MF 68 ±20% 1.500 1.800 0.44 0.45 1ME4012H-820MF 82 ±20% 1.700 2.040 0.42 0.38 1ME4012H-101MF 100 ±20% 1.700 2.040 0.42 0.31 1ME4018H-1R0NF 1ME4018H-1R5NF 1.0 1.5 ±30% ±30% 0.027 0.031 0.032 0.037 3.70 3.30 4.80 4.30 1ME4018H-2R2MF 2.2 ±20% 0.042 0.050 2.90 3.40 1ME4018H-3R3MF 3.3 ±20% 0.055 0.066 2.50 2.90 1ME4018H-4R7MF 4.7 ±20% 0.070 0.084 2.10 2.20 1ME4018H-6R8MF 6.8 ±20% 0.098 0.118 1.70 1.80 1ME4018H-100MF 10.0 ±20% 0.150 0.180 1.50 1.50 1ME4018H-150MF 15.0 ±20% 0.210 0.252 1.20 1.20 1ME4018H-220MF 22.0 ±20% 0.290 0.348 1.00 1.10 1ME4018H-330MF 33.0 ±20% 0.460 0.552 0.82 0.90 Accetek Electronics (Shenzhen) Co., Ltd. www.accetek.com Catalog-Power Inductor-2015A 37 1ME-H Series Low Profile Shielded Power Inductor Accetek Inductance DCR Part Number μH Tolerance Typ.(Ω) Max.(Ω) Irms(A) Isat(A) 1ME4018H-470MF 47.0 ±20% 0.620 0.744 0.73 0.70 1ME4018H-680MF 68.0 ±20% 0.810 0.972 0.62 0.62 1ME4018H-101MF 100.0 ±20% 1.300 1.560 0.47 0.57 1ME4018H-151MF 150.0 ±20% 2.600 3.120 0.33 0.47 1ME4018H-221MF 220.0 ±20% 3.200 3.840 0.29 0.38 1ME4018H-331MF 330.0 ±20% 4.900 5.880 0.23 0.31 1ME8030H-1R0NF 1ME8030H-1R5NF 1 1.5 ±30% ±30% 0.009 0.012 0.012 0.016 7.30 6.20 9.00 7.60 1ME8030H-2R2MF 2.2 ±20% 0.015 0.020 5.70 6.30 1ME8030H-3R3MF 3.3 ±20% 0.019 0.025 5.10 5.10 1ME8030H-4R7MF 4.7 ±20% 0.022 0.029 4.70 4.30 1ME8030H-6R8MF 6.8 ±20% 0.029 0.038 3.90 3.50 1ME8030H-100MF 10.0 ±20% 0.033 0.043 3.70 2.80 1ME8030H-150MF 15.0 ±20% 0.060 0.078 2.80 2.40 1ME8030H-220MF 22.0 ±20% 0.070 0.091 2.40 2.00 1ME8030H-330MF 33.0 ±20% 0.120 0.156 2.10 1.70 1ME8030H-470MF 47.0 ±20% 0.170 0.221 1.70 1.40 1. 2. 3. 4. 5. E Inductance measured @ 100KHz, 0.3V at 25°C temperature. DCR measured @ 25°C. Irms for an approximate 40°C rise from 20°C ambient temperature. Isat for approximate 30% L roll off at 25°C. Specifications subject to change without notice please check our website for latest information. TAPE AND REEL SPECIFICATIONS D B W P1 E T Reel Dimensions(REF) Tape Dimensions(REF) Case Size Parts per Reel A B C D E W P P0 P1 H T 1ME201610H 2000 178 58 13 13 9.0 8 4 4 2 1.2 0.3 1ME252010H 2000 178 58 13 13 9.0 8 4 4 2 1.2 0.3 1ME252012H 2000 178 58 13 13 9.0 8 4 4 2 1.4 0.3 1ME3012H 2000 178 58 13 13 9.0 8 4 4 2 1.6 0.3 1ME3015H 2000 178 58 13 13 9.0 8 4 4 2 1.9 0.3 1ME4012H 4500 330 100 13 19 12.4 12 8 4 2 1.6 0.3 1ME4018H 3000 330 100 13 19 12.4 12 8 4 2 2.4 0.3 1ME8030H 1500 330 100 13 22 16.4 16 12 4 2 3.4 0.4 Accetek Electronics (Shenzhen) Co., Ltd. 38 H 220 A C P0 P www.accetek.com Catalog-Power Inductor-2015A 1MF Series Shielded Power Inductor Accetek A FEATURES Shielded Construction with low DCR Saturation current rating up to 13.5 Amps Inductance ratings from 0.8 to 1000 µH Widely applications, highly recommend to use as Buck, Boost, or Forward inductor Operating Temperature range from -40°C to +125°C (Including Self-heating) 260°C reflow peak temperature qualified B PART NUMBER SYSTEM 1MF 105 ❶ ❷ - 100 M F ❸ ❹ ❺ ❶ Series 1MF Series Code Dimension Code (L*W*H) (mm) ❷ 103 (10.0×10.2×3.0) 104 (10.0×10.2×4.0) 105 (10.0×10.2×5.0) ❸ Inductance Code e.g. Calculation ❹ Inductance Tolerance 2R2 2.2μH K ±10% 100 0 M ±20% N ±30% 10×10 μH = 10μH 1 101 ❺ C 10×10 μH = 100μH RoHS Compliant DRAWINGS AND DIMENSIONS 1MF103 3.0±0,1 [0,118±0,004] 3.0 Max [0,118] XXX 10,2±0,3 [0,402±0,012] 2.0 [0,079] 7,7±0,3 [0,303±0,012] 3,5 [0,138] 10.0±0,3 [0,394±0,012] 11.0 [0,433] XXX 10.0±0,3 [0,394±0,012] 1MF104 3.0±0,1 [0,118±0,004] 4.0 Max [0,157] 10,2±0,3 [0,402±0,012] 7,7±0,3 [0,303±0,012] Land Pattern XXX 10,2±0,3 [0,402±0,012] 7,7±0,3 [0,303±0,012] 11.0 [0,433] Schematic 3.0±0,1 [0,118±0,004] 5.0 Max [0,197] 2.0 [0,079] Land Pattern 1MF105 10.0±0,3 [0,394±0,012] 3,5 [0,138] 3,5 [0,138] 2.0 [0,079] 1 11.0 [0,433] 2 Land Pattern XXX = Inductance value Accetek Electronics (Shenzhen) Co., Ltd. www.accetek.com Catalog-Power Inductor-2015A 39 1MF Series Shielded Power Inductor Accetek D SPECIFICATIONS Inductance1 DCR2 Irms3 Isat4 Part Number μH Tolerance Typ.(Ω) Max.(Ω) A A 1MF103-0R8NF 0.8 ±30% 0.0044 0.0057 8.30 11.20 1MF103-1R5NF 1.5 ±30% 0.0085 0.0110 5.80 8.00 1MF103-2R2NF 2.2 ±30% 0.0130 0.0169 5.10 6.70 1MF103-3R3NF 3.3 ±30% 0.016 0.021 4.70 5.56 1MF103-4R7NF 4.7 ±30% 0.023 0.030 4.00 4.65 1MF103-6R8NF 6.8 ±30% 0.027 0.035 3.60 3.84 1MF103-8R2NF 8.2 ±30% 0.038 0.050 3.00 3.54 1MF103-100MF 10 ±20% 0.045 0.059 2.80 3.18 1MF103-150MF 15 ±20% 0.070 0.091 2.05 2.60 1MF103-220MF 22 ±20% 0.110 0.143 1.60 2.16 1MF103-330MF 33 ±20% 0.155 0.202 1.35 1.74 1MF103-470MF 47 ±20% 0.230 0.299 1.20 1.40 1MF103-560MF 56 ±20% 0.250 0.325 1.15 1.36 1MF103-680MF 68 ±20% 0.330 0.429 0.95 1.22 1MF103-820MF 82 ±20% 0.380 0.494 0.80 1.14 1MF103-101MF 100 ±20% 0.525 0.683 0.70 1.02 1MF103-121MF 120 ±20% 0.580 0.754 0.65 0.89 1MF103-151MF 150 ±20% 0.670 0.871 0.51 0.84 1MF104-1R5NF 1MF104-2R2NF 1.5 2.2 ±30% ±30% 0.0060 0.0078 0.0081 0.0105 6.50 6.10 10.00 7.50 1MF104-2R5NF 2.5 ±30% 0.0078 0.0105 6.10 7.50 1MF104-3R8NF 3.8 ±30% 0.0096 0.013 5.50 6.00 1MF104-4R7NF 4.7 ±30% 0.016 0.022 5.40 5.50 1MF104-5R2NF 5.2 ±30% 0.016 0.022 5.40 5.50 1MF104-6R8NF 6.8 ±30% 0.020 0.027 4.50 4.80 1MF104-7R0NF 7.0 ±30% 0.020 0.027 4.50 4.80 1MF104-100MF 10 ±20% 0.026 0.035 3.80 4.40 1MF104-120MF 12 ±20% 0.034 0.046 3.40 3.70 1MF104-150MF 15 ±20% 0.037 0.050 3.10 3.60 1MF104-180MF 18 ±20% 0.051 0.069 2.60 3.10 1MF104-220MF 22 ±20% 0.054 0.073 2.50 2.90 1MF104-270MF 27 ±20% 0.065 0.088 2.30 2.60 1MF104-330MF 33 ±20% 0.069 0.093 2.20 2.30 1MF104-390MF 39 ±20% 0.094 0.127 2.00 2.20 1MF104-470MF 47 ±20% 0.095 0.128 1.90 2.10 1MF104-560MF 56 ±20% 0.139 0.188 1.50 1.65 1MF104-680MF 68 ±20% 0.158 0.213 1.42 1.50 1MF104-820MF 82 ±20% 0.218 0.283 1.30 1.45 1MF104-101MF 100 ±20% 0.225 0.304 1.25 1.35 1MF104-121MF 120 ±20% 0.278 0.375 1.08 1.20 1MF104-151MF 150 ±20% 0.375 0.506 0.85 1.15 1MF104-181MF 180 ±20% 0.421 0.568 0.75 1.00 1MF104-221MF 220 ±20% 0.560 0.756 0.70 0.92 0.84 1MF104-271MF 270 ±20% 0.632 0.853 0.55 1MF104-331MF 330 ±20% 0.810 1.090 0.52 0.70 1MF105-0R8NF 1MF105-1R5NF 0.8 1.5 ±30% ±30% 0.0033 0.0045 0.0043 0.0058 9.50 8.30 13.50 10.50 1MF105-2R2NF 2.2 ±30% 0.0056 0.0072 7.50 9.25 1MF105-3R3NF 3.3 ±30% 0.0080 0.0104 6.50 7.80 1MF105-4R7NF 4.7 ±30% 0.0095 0.0123 6.10 6.40 1MF105-6R8NF 6.8 ±30% 0.014 0.018 5.40 5.40 1MF105-8R2NF 8.2 ±30% 0.016 0.020 5.00 4.85 1MF105-100MF 10 ±20% 0.020 0.026 4.50 4.45 1MF105-120MF 12 ±20% 0.025 0.033 3.80 4.00 Accetek Electronics (Shenzhen) Co., Ltd. 40 www.accetek.com Catalog-Power Inductor-2015A 1MF Series Shielded Power Inductor Accetek 1MF105-150MF 15 ±20% 0.032 Inductance1 0.041 DCR2 3.40 3.60 Irms3 Isat4 Part Number μH Tolerance Typ.(Ω) Max.(Ω) A A 1MF105-180MF 18 ±20% 0.035 0.046 3.10 3.20 1MF105-220MF 22 ±20% 0.047 0.061 2.90 2.95 1MF105-270MF 27 ±20% 0.053 0.069 2.60 2.70 1MF105-330MF 33 ±20% 0.065 0.084 2.50 2.40 1MF105-390MF 39 ±20% 0.082 0.106 2.25 2.30 1MF105-470MF 47 ±20% 0.100 0.130 2.00 2.00 1MF105-560MF 56 ±20% 0.115 0.149 1.90 1.90 1MF105-680MF 68 ±20% 0.155 0.201 1.60 1.65 1MF105-820MF 82 ±20% 0.175 0.227 1.45 1.50 1MF105-101MF 100 ±20% 0.195 0.253 1.35 1.35 1MF105-121MF 120 ±20% 0.233 0.303 1.18 1.28 1MF105-151MF 150 ±20% 0.285 0.370 1.10 1.12 1MF105-181MF 180 ±20% 0.322 0.419 1.00 1.04 1MF105-221MF 220 ±20% 0.385 0.500 0.94 0.94 1MF105-271MF 270 ±20% 0.512 0.672 0.80 0.84 1MF105-331MF 330 ±20% 0.625 0.812 0.73 0.75 1MF105-391MF 390 ±20% 0.733 0.953 0.70 0.70 1MF105-471MF 470 ±20% 0.992 1.289 0.54 0.60 1MF105-561MF 560 ±20% 1.100 1.430 0.52 0.54 1MF105-681MF 680 ±20% 1.230 1.599 0.51 0.52 1MF105-821MF 820 ±20% 1.360 1.768 0.48 0.50 1MF105-102MF 1000 ±20% 1.530 1.989 0.42 0.48 1. 2. 3. 4. 5. E Inductance measured @ 100KHz, 0.3V at 25°C temperature. DCR measured @ 25°C. Irms for an approximate 40°C rise from 20°C ambient temperature. Isat for approximate 35% L roll off at 25°C. Specifications subject to change without notice please check our website for latest information. TAPE AND REEL SPECIFICATIONS D P0 P H 220 B A C P1 W T E Case Size Parts per Reel Reel Dimensions(REF) Tape Dimensions(REF) A B C D E W P P0 P1 H T 330 100 13 30 24.5 24 16 4 2 3.2 0.4 1MF103 1000 1MF104 1000 330 100 13 30 24.5 24 16 4 2 4.2 0.4 1MF105 500 330 100 13 30 24.5 24 16 4 2 5.2 0.4 Accetek Electronics (Shenzhen) Co., Ltd. www.accetek.com Catalog-Power Inductor-2015A 41 1MG Series Shielded Power Inductor Accetek A FEATURES High saturation current Low loss MnZn ferrite core Operating Temperature range from -40°C to +125°C (Including Self-heating) 260°C reflow peak temperature qualified B PART NUMBER SYSTEM 1MG 135 ❶ ❷ - 100 M F ❸ ❹ ❺ ❶ Series 1MG Series Code Dimension Code (L*W*H) (mm) ❷ 63 (6.6×4.5×3.0) 135 (12.7×10.0×5.0) 187 (18.6×15.3×7.2) ❸ Inductance Code e.g. Calculation ❹ Inductance Tolerance 2R2 2.2μH M ±20% 100 0 N ±30% 10×10 μH = 10μH 1 101 10×10 μH = 100μH RoHS Compliant ❺ C DRAWINGS AND DIMENSIONS 1MG63 F A B H D I E J D I A C xxx C xxx B 1MG135,1MG187 Schematic F H D I E J D I 1 2 XXX = Inductance value Case Size Dimensions (mm) Amax Bmax Cmax Dref Eref Fref Href. Iref. Jref. 1MG63 6.6 4.5 3.0 1.0 4.3 3.05 3.56 1.4 4.06 1MG135 12.7 10.0 5.0 2.4 7.6 2.5 2.8 3.0 7.3 1MG187 18.6 15.3 7.2 2.6 13.1 2.54 2.79 2.92 12.45 Accetek Electronics (Shenzhen) Co., Ltd. 42 www.accetek.com Catalog-Power Inductor-2015A 1MG Series Unshielded Power Inductor Accetek D SPECIFICATIONS Inductance1 DCR2 Irms3 Isat4 SRFtyp. Part Number μH Tolerance Typ.(Ω) Max.(Ω) A A MHz 1MG63-1R0MF 1.0 ±20% 0.017 0.050 2.90 2.90 130 1MG63-1R5MF 1.5 ±20% 0.020 0.050 2.80 2.90 115 1MG63-2R2MF 2.2 ±20% 0.028 0.070 2.40 2.30 90 1MG63-3R3MF 3.3 ±20% 0.044 0.080 2.00 2.00 70 1MG63-4R7MF 4.7 ±20% 0.063 0.090 1.50 1.50 50 1MG63-6R8MF 6.8 ±20% 0.092 0.130 1.40 1.20 45 1MG63-100MF 10 ±20% 0.121 0.160 1.20 1.10 35 1MG63-150MF 15 ±20% 0.176 0.230 1.10 0.90 30 1MG63-220MF 22 ±20% 0.255 0.370 0.80 0.70 20 1MG63-330MF 33 ±20% 0.362 0.510 0.60 0.58 15 1MG63-470MF 47 ±20% 0.556 0.640 0.50 0.50 14 1MG63-680MF 68 ±20% 0.790 0.860 0.40 0.40 11 1MG63-101MF 100 ±20% 1.080 1.270 0.30 0.31 9 1MG63-151MF 150 ±20% 1.450 2.000 0.25 0.27 6 1MG63-221MF 220 ±20% 2.580 3.110 0.20 0.22 6 1MG63-331MF 330 ±20% 4.150 5.000 0.16 0.18 5 1MG63-471MF 470 ±20% 5.580 6.800 0.16 0.15 4 1MG63-102MF 1000 ±20% 11.500 13.800 0.07 0.10 2 1MG135-1R0MF 1MG135-1R5MF 1.0 1.5 ±20% ±20% 0.004 0.006 0.007 0.009 8.60 7.20 14.25 10.70 170 120 1MG135-2R5MF 2.5 ±20% 0.009 0.012 5.80 10.00 65 1MG135-3R3MF 3.3 ±20% 0.011 0.015 5.30 7.00 50 1MG135-4R7MF 4.7 ±20% 0.015 0.019 5.00 6.00 45 1MG135-5R6MF 5.6 ±20% 0.024 0.032 4.00 6.00 38 1MG135-6R8MF 6.8 ±20% 0.026 0.034 3.80 5.10 35 1MG135-8R2MF 8.2 ±20% 0.034 0.040 3.20 4.20 32 1MG135-100MF 10 ±20% 0.035 0.045 3.30 5.00 25 1MG135-150MF 15 ±20% 0.043 0.060 2.90 3.60 23 1MG135-220MF 22 ±20% 0.071 0.095 2.60 3.10 18 1MG135-330MF 33 ±20% 0.094 0.120 2.30 2.60 15 1MG135-470MF 47 ±20% 0.142 0.190 1.80 2.14 12 1MG135-680MF 68 ±20% 0.187 0.240 1.60 1.70 10 1MG135-101MF 100 ±20% 0.253 0.330 1.40 1.50 8 1MG135-151MF 150 ±20% 0.448 0.590 1.00 1.20 6 1MG135-221MF 220 ±20% 0.601 0.780 0.90 1.10 5 1MG135-331MF 330 ±20% 0.893 1.150 0.70 0.80 4 1MG135-471MF 470 ±20% 1.315 1.700 0.60 0.65 4 1MG135-681MF 680 ±20% 1.942 2.600 0.50 0.55 3 1MG135-102MF 1000 ±20% 2.940 3.900 0.40 0.52 2 1MG187-1R0MF 1MG187-2R2MF 1.0 2.2 ±20% ±20% 0.005 0.008 0.009 0.014 8.50 7.10 25.00 20.30 80 45 1MG187-3R3MF 3.3 ±20% 0.010 0.018 6.20 15.80 40 1MG187-5R6MF 5.6 ±20% 0.012 0.020 5.30 13.10 30 1MG187-100MF 10 ±20% 0.021 0.031 4.30 10.00 20 1MG187-150MF 15 ±20% 0.030 0.036 4.00 8.00 15 1MG187-220MF 22 ±20% 0.043 0.047 3.50 7.00 14 1MG187-330MF 33 ±20% 0.060 0.066 3.00 5.50 10 1MG187-470MF 47 ±20% 0.076 0.086 2.60 4.50 9 1MG187-680MF 68 ±20% 0.110 0.130 2.30 3.60 7 1MG187-101MF 100 ±20% 0.141 0.190 1.80 3.40 6 1MG187-151MF 150 ±20% 0.210 0.250 1.50 2.70 4 1MG187-221MF 220 ±20% 0.326 0.380 1.20 2.40 4 1MG187-331MF 330 ±20% 0.431 0.560 1.00 1.90 3 1MG187-471MF 470 ±20% 0.633 0.850 0.82 1.60 3 Accetek Electronics (Shenzhen) Co., Ltd. www.accetek.com Catalog-Power Inductor-2015A 43 1MG Series Shielded Power Inductor Accetek Inductance1 DCR2 Irms3 Isat4 SRFtyp. Part Number μH Tolerance Typ.(Ω) Max.(Ω) A A MHz 1MG187-681MF 680 ±20% 0.954 1.100 0.72 1.30 2 1MG187-102MF 1000 ±20% 1.370 1.800 0.56 1.10 2 1. 2. 3. 4. 5. E Inductance measured @ 100KHz, 0.3V at 25°C temperature. DCR measured @ 25°C. Irms: DC current for an approximate 15°C rise from 20°C ambient temperature. Isat: DC current for approximate 10% L roll off at 25°C. Specifications subject to change without notice please check our website for latest information. TAPE AND REEL SPECIFICATIONS D P0 P H 220 W B A C P1 T E Case Size Parts per Reel Reel Dimensions(REF) Tape Dimensions(REF) A B C D E W P P0 P1 H T 1MG63 2500 330 100 13 22.5 17.5 16 8 4 2 3.2 0.5 1MG135 500 330 100 13 30 24.5 24 16 4 2 5.6 0.5 1MG187 250 330 100 13 38.5 33.5 32 20 4 2 7.6 0.5 Accetek Electronics (Shenzhen) Co., Ltd. 44 www.accetek.com Catalog-Power Inductor-2015A 1MT Series High Current Shielded Power Inductor Accetek A FEATURES Molded Metal Construction with ultra low DCR Magnetically shielded Low profile ready (1.0mm~) High current capability (~110A) No acoustic noise and no leakage field Operating Temperature range from -40°C to +125°C (Including Self-heating) B PART NUMBER SYSTEM 1MT 1350 ❶ ❷ - 2R2 M F ❸ ❹ ❺ ❶ Series 1MT Series Code Dimension Code (L*W*H) (mm) ❷ 201210 (2.0×1.25×1.0) 201610 (2.0×1.6×1.0) 201612 (2.0×1.6×1.2) 252010 (2.5×2.0×1.0) 252012 (2.5×2.0×1.2) 322510 (3.2×2.5×1.0) ❸ Inductance Code 322512 (3.2×2.5×1.2) 0412 (4.0×4.0×1.2) 0420 (4.0×4.0×2.0) e.g. Calculation 0518 (5.4×5.4×1.8) 0520 (5.4×5.4×2.0) 0530 (5.4×5.4×3.0) 2R2 2.2μH 0715 (6.6×7.3×1.5) 0718 (6.6×7.3×1.8) 0724 (6.6×7.3×2.4) 101 1 0730 (6.6×7.3×3.0) 0750 (6.6×7.3×5.0) 1030 (10.1×11.5×3.0) 1040 (10.1×11.5×4.0) 1330 (12.6×13.8×3.0) 1350 (12.6×13.8×5.0) 1360 (12.6×13.8×6.0) 1365 (12.6×13.8×6.5) ❺ C 10×10 μH = 100μH RoHS Compliant ❹ Inductance Tolerance M ±20% DRAWINGS AND DIMENSIONS Drawing Fig. A Schematic I I C A H B J D Land Pattern 1 Drawing Fig. B I A D 2 H J B Land Pattern C E Accetek Electronics (Shenzhen) Co., Ltd. www.accetek.com Catalog-Power Inductor-2015A 45 1MT Series High Current Shielded Power Inductor Accetek Case Size Dimensions A B 1MT201210 2.0±0.2 1.25±0.2 1MT201610 2.0±0.2 1.6±0.2 1MT201612 2.0±0.2 1.6±0.2 1MT252010 2.5±0.2 2.0±0.2 1MT252012 2.5±0.2 1MT322510 Drawing Fig. D E Iref. Jref. Href. 1.0 0.5±0.3 / 2.0 0.9 1.2 A 1.0 0.5±0.3 / 2.0 0.9 1.6 A 1.2 0.5±0.3 / 2.0 0.9 1.6 A 1.0 0.6±0.2 / 2.8 1.2 2.0 A 2.0±0.2 1.2 0.6±0.2 / 2.8 1.2 2.0 A 3.2±0.2 2.5±0.2 1.0 0.6±0.2 / 3.2 1.7 2.5 A 1MT322512 3.2±0.2 2.5±0.2 1.2 0.6±0.2 / 3.2 1.7 2.5 A 1MT0412 4.0±0.3 4.5 Max 1.2 1.5±0.3 0.8±0.3 5.2 2.5 2.5 B 1MT0420 4.0±0.3 4.5 Max 2.0 1.5±0.3 0.8±0.3 5.2 2.5 2.5 B 1MT0518 5.4±0.3 5.4 Max 1.8 2.0±0.3 1.1±0.3 6.0 2.2 2.5 B 1MT0520 5.4±0.3 5.4 Max 2.0 2.0±0.3 1.1±0.3 6.0 2.2 2.5 B 1MT0530 5.4±0.3 5.4 Max 3.0 2.0±0.3 1.1±0.3 6.0 2.2 2.5 B 1MT0715 6.6±0.3 7.3 Max 1.5 3.0±0.3 1.6±0.3 8.4 3.7 3.5 B 1MT0718 6.6±0.3 7.3 Max 1.8 3.0±0.3 1.6±0.3 8.4 3.7 3.5 B 1MT0724 6.6±0.3 7.3 Max 2.4 3.0±0.3 1.6±0.3 8.4 3.7 3.5 B 1MT0730 6.6±0.3 7.3 Max 3.0 3.0±0.3 1.6±0.3 8.4 3.7 3.5 B 1MT0750 6.6±0.3 7.3 Max 5.0 3.0±0.3 1.6±0.3 8.4 3.7 3.5 B 1MT1030 10.1±0.3 11.5 Max 3.0 3.0±0.3 2.0±0.3 13.6 5.4 4.1 B 1MT1040 10.1±0.3 11.5 Max 4.0 3.0±0.3 2.0±0.3 13.6 5.4 4.1 B 1MT1330 12.6±0.3 13.8 Max 3.0 4.0±0.3 2.0±0.3 14.5 8.0 5.0 B 1MT1350 12.6±0.3 13.8 Max 5.0 4.0±0.3 2.0±0.3 14.5 8.0 5.0 B 1MT1360 12.6±0.3 13.8 Max 6.0 4.0±0.3 2.0±0.3 14.5 8.0 5.0 B 1MT1365 12.6±0.3 13.8 Max 6.5 4.0±0.3 2.0±0.3 14.5 8.0 5.0 B D Cmax SPECIFICATIONS Inductance1 Part Number μH DCR2 Tolerance Typ.(mΩ) Max.(mΩ) Irms3(A) Isat4(A) 1MT201210-R33MF 0.33 ±20% 58.0 75.0 3.0 3.6 1MT201210-R47MF 0.47 ±20% 61.0 80.0 2.8 3.2 1MT201210-R68MF 0.68 ±20% 82.0 105.0 2.5 3.0 1MT201210-1R0MF 1.0 ±20% 137.0 155.0 2.0 2.0 1MT201610-R24MF 1MT201610-R33MF 0.24 0.33 ±20% ±20% 28.0 40.0 40.0 48.0 4.5 3.8 4.2 4.0 1MT201610-R47MF 0.47 ±20% 44.0 54.0 3.6 3.2 1MT201610-R56MF 0.56 ±20% 46.0 59.0 3.3 2.8 1MT201610-R68MF 0.68 ±20% 55.0 72.0 3.0 2.7 1MT201610-1R0MF 1.0 ±20% 81.0 96.0 2.3 2.2 1MT201610-1R5MF 1.5 ±20% 122.0 150.0 2.0 2.1 1MT201610-2R2MF 2.2 ±20% 170.0 204.0 1.6 2.0 1MT201612-R24MF 1MT201612-R47MF 0.24 0.47 ±20% ±20% 25.0 40.0 35.0 52.0 4.8 3.8 5.5 3.8 1MT201612-R68MF 0.68 ±20% 53.0 70.0 3.2 3.3 1MT201612-1R0MF 1.0 ±20% 67.0 82.0 2.7 3.1 1MT201612-1R5MF 1.5 ±20% 95.0 120.0 2.6 2.6 1MT201612-2R2MF 2.2 ±20% 165.0 195.0 1.7 2.0 1MT252010-R24MF 1MT252010-R47MF 0.24 0.47 ±20% ±20% 24.0 36.0 40.0 46.0 5.0 3.6 7.5 5.2 1MT252010-R68MF 0.68 ±20% 49.0 65.0 3.3 3.8 1MT252010-1R0MF 1.0 ±20% 60.0 78.0 3.0 3.4 Accetek Electronics (Shenzhen) Co., Ltd. 46 www.accetek.com Catalog-Power Inductor-2015A 1MT Series High Current Shielded Power Inductor Accetek Inductance1 DCR2 Typ.(mΩ) Max.(mΩ) Irms3(A) Isat4(A) ±20% 82.0 105.0 2.9 3.2 ±20% 130.0 156.0 1.8 2.6 0.33 0.47 ±20% ±20% 27.0 29.0 35.0 39.0 4.6 4.4 6.8 6.2 1MT252012-R68MF 0.68 ±20% 40.0 46.0 3.7 5.5 1MT252012-1R0MF 1.0 ±20% 45.0 59.0 3.5 4.0 1MT252012-1R5MF 1.5 ±20% 62.0 70.0 2.7 3.4 Part Number μH Tolerance 1MT252010-1R5MF 1.5 1MT252010-2R2MF 2.2 1MT252012-R33MF 1MT252012-R47MF 1MT252012-2R2MF 2.2 ±20% 102.0 115.0 2.3 3.3 1MT322510-R47MF 1MT322510-1R0MF 0.47 1.0 ±20% ±20% 32.0 52.0 38.0 62.0 5.2 3.7 6.0 4.0 1MT322510-1R5MF 1.5 ±20% 72.0 87.0 3.5 3.2 1MT322510-2R2MF 2.2 ±20% 98.0 118.0 2.5 2.7 1MT322512-R47MF 1MT322512-1R0MF 0.47 1.0 ±20% ±20% 21.0 39.0 31.0 45.0 5.3 3.8 6.0 4.8 1MT322512-2R2MF 2.2 ±20% 70.0 84.0 3.0 3.2 1MT0412-R47MF 1MT0412-R68MF 0.47 0.68 ±20% ±20% 19.0 32.0 21.0 36.0 6.0 4.5 6.8 6.0 1MT0412-1R0MF 1.0 ±20% 43.0 47.0 4.2 5.2 1MT0412-1R5MF 1.5 ±20% 68.0 75.0 3.2 4.0 1MT0412-2R2MF 2.2 ±20% 80.0 84.0 2.7 3.5 1MT0412-4R7MF 4.7 ±20% 175.0 195.0 1.8 2.8 1MT0420-R10MF 1MT0420-R22MF 0.10 0.22 ±20% ±20% 4.5 7.3 5.0 8.0 11.0 9.0 30.0 17.0 1MT0420-R47MF 0.47 ±20% 14.0 15.5 6.0 11.5 1MT0420-1R0MF 1.0 ±20% 32.0 36.0 3.8 8.5 1MT0420-1R5MF 1.5 ±20% 38.0 46.0 3.5 6.0 1MT0420-2R2MF 2.2 ±20% 52.0 58.0 3.0 5.0 1MT0420-3R3MF 3.3 ±20% 74.0 87.0 2.5 4.0 1MT0420-4R7MF 4.7 ±20% 95.0 105.0 1.7 1.8 1MT0518-R56MF 1MT0518-1R0MF 0.56 1.0 ±20% ±20% 8.0 15.0 10.0 17.0 9.5 8.0 15.0 9.0 1MT0518-1R2MF 1.2 ±20% 17.0 20.0 7.5 8.0 1MT0518-2R2MF 2.2 ±20% 30.0 35.0 5.0 6.5 1MT0518-3R3MF 3.3 ±20% 52.0 58.0 4.5 5.0 1MT0518-4R7MF 4.7 ±20% 78.0 85.0 3.5 4.0 1MT0518-6R8MF 6.8 ±20% 107.0 120.0 2.8 3.4 1MT0518-100MF 10 ±20% 140.0 155.0 2.5 3.0 1MT0520-R10MF 1MT0520-R22MF 0.10 0.22 ±20% ±20% 3.6 4.9 3.9 5.2 17.0 15.0 38.3 28.7 1MT0520-R33MF 0.33 ±20% 7.6 8.2 12.0 21.3 1MT0520-R47MF 0.47 ±20% 8.1 8.8 11.5 17.9 1MT0520-R68MF 0.68 ±20% 11.2 12.4 10.0 15.8 1MT0520-1R0MF 1.0 ±20% 18.9 20.0 7.0 13.7 1MT0520-2R2MF 2.2 ±20% 45.6 50.1 4.2 10.7 1MT0520-3R3MF 3.3 ±20% 79.2 85.5 3.3 7.3 1MT0520-4R7MF 4.7 ±20% 108.0 116.6 2.8 4.3 1MT0520-5R6MF 5.6 ±20% 113.0 122.0 2.5 3.9 1MT0520-6R8MF 6.8 ±20% 139.0 150.0 2.4 3.7 1MT0520-100MF 10 ±20% 184.0 199.0 2.3 3.4 1MT0530-R68MF 1MT0530-1R0MF 0.68 1.0 ±20% ±20% 11.0 13.0 12.0 14.0 8.5 7.0 14.0 11.0 1MT0530-1R2MF 1.2 ±20% 15.0 16.0 6.5 11.0 1MT0530-1R5MF 1.5 ±20% 20.0 25.0 6.0 10.0 1MT0530-2R2MF 2.2 ±20% 29.0 35.0 5.5 9.0 1MT0530-3R3MF 3.3 ±20% 32.0 38.0 5.0 7.0 1MT0530-4R7MF 4.7 ±20% 50.0 60.0 3.0 5.0 1MT0715-R56MF 0.56 ±20% 9.5 11.0 9.0 14.0 Accetek Electronics (Shenzhen) Co., Ltd. www.accetek.com Catalog-Power Inductor-2015A 47 1MT Series High Current Shielded Power Inductor Accetek Inductance1 DCR2 Part Number μH Tolerance Typ.(mΩ) Max.(mΩ) Irms3(A) Isat4(A) 1MT0715-R68MF 0.68 ±20% 10.5 12.0 8.5 12.0 1MT0715-R82MF 0.82 ±20% 15.0 17.0 7.0 10.0 1MT0715-1R0MF 1.0 ±20% 18.5 21.0 5.5 9.0 1MT0715-2R2MF 2.2 ±20% 46.0 54.0 3.5 6.0 1MT0715-3R3MF 3.3 ±20% 54.0 63.0 3.3 5.5 1MT0715-4R7MF 4.7 ±20% 76.0 85.0 3.2 5.0 1MT0715-6R8MF 6.8 ±20% 125.0 135.0 2.5 4.0 1MT0715-100MF 10 ±20% 165.0 175.0 2.0 3.0 1MT0718-R10MF 1MT0718-R33MF 0.10 0.33 ±20% ±20% 2.0 5.2 2.5 6.8 18.0 12.0 45.0 22.0 1MT0718-R47MF 0.47 ±20% 7.3 8.4 11.0 18.0 1MT0718-R68MF 0.68 ±20% 11.0 12.7 9.0 17.0 1MT0718-1R0MF 1.0 ±20% 15.0 17.0 7.0 14.0 1MT0718-2R2MF 2.2 ±20% 30.0 35.0 6.0 13.0 1MT0718-3R3MF 3.3 ±20% 56.0 60.0 3.5 10.0 1MT0718-4R7MF 4.7 ±20% 68.0 70.0 3.5 5.0 1MT0718-6R8MF 6.8 ±20% 100.0 110.0 2.8 3.5 1MT0724-R10MF 1MT0724-R22MF 0.10 0.22 ±20% ±20% 1.5 2.6 1.7 3.2 30.0 21.0 70.0 34.0 1MT0724-R33MF 0.33 ±20% 3.5 4.1 18.0 24.5 1MT0724-R47MF 0.47 ±20% 4.5 5.1 15.0 22.0 1MT0724-R56MF 0.56 ±20% 5.9 6.5 13.0 17.0 1MT0724-R82MF 0.82 ±20% 8.3 9.5 11.0 14.0 1MT0724-1R0MF 1.0 ±20% 11.2 13.5 9.0 16.0 1MT0724-1R5MF 1.5 ±20% 17.0 20.0 9.0 15.0 1MT0724-2R2MF 2.2 ±20% 23.0 28.0 7.0 14.0 1MT0724-3R3MF 3.3 ±20% 31.0 39.0 5.5 13.0 1MT0724-4R7MF 4.7 ±20% 41.0 50.0 5.0 10.0 1MT0724-5R6MF 5.6 ±20% 51.0 60.0 5.0 6.5 1MT0724-6R8MF 6.8 ±20% 57.0 70.0 4.0 6.0 1MT0724-100MF 10 ±20% 92.0 101.0 3.1 4.0 1MT0730-R10MF 1MT0730-R22MF 0.10 0.22 ±20% ±20% 1.5 2.5 1.7 2.8 32.5 23.0 60.0 40.0 1MT0730-R33MF 0.33 ±20% 3.5 3.9 20.0 30.0 1MT0730-R47MF 0.47 ±20% 4.0 4.2 17.5 26.0 1MT0730-R56MF 0.56 ±20% 4.7 5.0 16.5 25.5 1MT0730-R68MF 0.68 ±20% 5.0 5.5 15.5 25.0 1MT0730-R82MF 0.82 ±20% 6.7 8.0 13.0 24.0 1MT0730-1R0MF 1.0 ±20% 9.0 10.0 11.0 22.0 1MT0730-1R5MF 1.5 ±20% 14.0 15.0 9.0 18.0 1MT0730-2R2MF 2.2 ±20% 18.0 20.0 8.0 14.0 1MT0730-3R3MF 3.3 ±20% 28.0 30.0 6.0 13.5 1MT0730-4R7MF 4.7 ±20% 37.0 40.0 5.5 10.0 1MT0730-6R8MF 6.8 ±20% 54.0 60.0 4.5 8.0 1MT0730-8R2MF 8.2 ±20% 54.0 60.0 4.5 6.0 1MT0730-100MF 10 ±20% 62.0 68.0 4.0 5.5 1MT0730-220MF 22 ±20% 160.0 185.0 2.5 3.0 1MT0750-R36MF 1MT0750-R40MF 0.36 0.40 ±20% ±20% 3.2 3.2 3.5 3.5 21.0 20.0 25.0 23.0 1MT0750-R56MF 0.56 ±20% 3.4 3.6 20.0 18.0 1MT0750-R68MF 0.68 ±20% 3.9 4.2 18.0 17.0 1MT0750-R82MF 0.82 ±20% 4.6 4.9 16.5 16.0 1MT0750-1R0MF 1.0 ±20% 5.6 6.5 13.0 15.0 1MT0750-1R2MF 1.2 ±20% 6.0 7.5 12.0 13.0 1MT0750-1R5MF 1.5 ±20% 6.0 7.5 11.0 12.0 1MT0750-2R2MF 2.2 ±20% 11.2 12.5 8.0 12.0 1MT0750-3R3MF 3.3 ±20% 19.9 20.9 7.0 9.0 Accetek Electronics (Shenzhen) Co., Ltd. 48 www.accetek.com Catalog-Power Inductor-2015A 1MT Series High Current Shielded Power Inductor Accetek Inductance1 DCR2 Part Number μH Tolerance Typ.(mΩ) Max.(mΩ) Irms3(A) Isat4(A) 1MT0750-4R7MF 4.7 ±20% 23.0 25.0 6.5 7.0 1MT0750-8R2MF 8.2 ±20% 40.0 43.0 5.5 5.5 1MT0750-100MF 10.0 ±20% 48.0 55.0 4.5 3.3 1MT1030-R10MF 1MT1030-R33MF 0.10 0.33 ±20% ±20% 0.7 1.3 0.7 1.6 30.0 23.0 75.0 32.0 1MT1030-R36MF 0.36 ±20% 1.3 1.6 23.0 28.0 1MT1030-R47MF 0.47 ±20% 2.1 2.5 23.0 26.0 1MT1030-R56MF 0.56 ±20% 2.4 3.0 22.0 24.0 1MT1030-R68MF 0.68 ±20% 2.9 3.4 21.0 23.0 1MT1030-1R0MF 1.0 ±20% 5.3 6.0 15.0 21.0 1MT1030-1R5MF 1.5 ±20% 6.5 7.5 13.5 20.0 1MT1030-2R2MF 2.2 ±20% 8.0 9.0 13.0 16.0 1MT1030-3R3MF 3.3 ±20% 14.5 16.0 9.0 14.0 1MT1030-4R7MF 4.7 ±20% 20.5 22.5 7.0 13.0 1MT1030-8R2MF 8.2 ±20% 35.0 45.0 5.0 8.5 1MT1030-100MF 10 ±20% 50.0 55.0 5.0 7.5 1MT1030-150MF 15 ±20% 59.0 65.0 4.0 6.0 1MT1040-R22MF 1MT1040-R36MF 0.22 0.36 ±20% ±20% 0.7 1.1 0.8 1.3 38.0 30.0 60.0 60.0 1MT1040-R39MF 0.39 ±20% 1.1 1.3 30.0 60.0 1MT1040-R47MF 0.47 ±20% 1.6 1.8 26.0 40.0 1MT1040-R56MF 0.56 ±20% 1.6 1.8 26.0 40.0 1MT1040-R68MF 0.68 ±20% 2.4 2.7 22.0 39.0 1MT1040-R82MF 0.82 ±20% 2.7 3.0 20.0 38.0 1MT1040-1R0MF 1.0 ±20% 3.0 3.3 18.0 36.0 1MT1040-1R5MF 1.5 ±20% 3.8 4.2 16.0 33.0 1MT1040-2R2MF 2.2 ±20% 6.7 7.0 12.0 27.0 1MT1040-3R3MF 3.3 ±20% 11.0 13.2 11.0 14.5 1MT1040-4R7MF 4.7 ±20% 13.2 16.5 10.0 13.0 1MT1040-5R6MF 5.6 ±20% 16.0 18.5 8.5 10.5 1MT1040-6R8MF 6.8 ±20% 21.5 24.0 7.5 9.5 1MT1040-100MF 10 ±20% 27.0 30.0 7.0 8.5 1MT1040-150MF 15 ±20% 40.0 45.0 6.0 7.0 1MT1040-220MF 22 ±20% 60.0 66.0 5.0 5.5 1MT1040-330MF 33 ±20% 85.0 92.0 4.4 5.0 1MT1040-470MF 47 ±20% 130.0 145.0 3.3 3.5 1MT1040-680MF 68 ±20% 178.0 195.0 2.3 3.0 1MT1330-R22MF 1MT1330-R33MF 0.22 0.33 ±20% ±20% 1.1 1.3 1.3 1.5 38.0 36.5 65.0 62.0 1MT1330-R39MF 0.39 ±20% 1.5 1.7 34.5 57.0 1MT1330-R47MF 0.47 ±20% 1.7 2.0 32.0 55.0 1MT1330-R56MF 0.56 ±20% 1.8 2.2 29.0 51.0 1MT1330-R68MF 0.68 ±20% 2.3 2.5 28.0 49.0 1MT1330-R82MF 0.82 ±20% 2.6 3.0 25.0 44.0 1MT1330-1R0MF 1.0 ±20% 3.3 3.5 24.0 40.0 1MT1330-1R5MF 1.5 ±20% 5.1 5.5 19.0 35.0 1MT1330-2R2MF 2.2 ±20% 7.2 8.0 16.0 29.0 1MT1330-3R3MF 3.3 ±20% 10.0 12.0 12.0 27.0 1MT1330-4R7MF 4.7 ±20% 16.0 18.0 9.0 22.0 1MT1350-R36MF 1MT1350-R47MF 0.36 0.47 ±20% ±20% 0.8 1.1 1.1 1.3 41.0 38.0 75.0 65.0 1MT1350-R56MF 0.56 ±20% 1.2 1.5 36.0 55.0 1MT1350-R68MF 0.68 ±20% 1.5 1.7 34.0 54.0 1MT1350-R82MF 0.82 ±20% 1.8 2.1 31.0 53.0 1MT1350-1R0MF 1.0 ±20% 2.0 2.5 29.0 50.0 1MT1350-1R5MF 1.5 ±20% 3.4 4.1 23.0 48.0 1MT1350-2R2MF 2.2 ±20% 4.5 5.5 20.0 32.0 Accetek Electronics (Shenzhen) Co., Ltd. www.accetek.com Catalog-Power Inductor-2015A 49 1MT Series High Current Shielded Power Inductor Accetek Inductance1 DCR2 Max.(mΩ) Irms3(A) Isat4(A) 7.8 9.2 15.0 32.0 13.0 15.0 12.0 27.0 14.0 16.5 11.5 22.0 ±20% 15.5 18.5 11.0 21.0 12 15 ±20% ±20% 20.0 25.0 23.0 29.0 7.0 6.0 10.0 9.0 18 ±20% 30.0 35.0 5.0 8.0 Part Number μH Tolerance 1MT1350-3R3MF 3.3 ±20% 1MT1350-4R7MF 4.7 ±20% 1MT1350-5R6MF 5.6 ±20% 1MT1350-6R8MF 6.8 1MT1360-120MF 1MT1360-150MF 1MT1360-180MF Typ.(mΩ) 1MT1360-220MF 22 ±20% 34.0 40.0 5.0 7.5 1MT1360-270MF 27 ±20% 40.0 53.0 4.5 6.5 1MT1360-330MF 33 ±20% 45.0 60.0 4.5 6.0 1MT1360-390MF 39 ±20% 50.0 65.0 4.0 5.0 1MT1360-121MF 120 ±20% 210.0 235.0 2.3 3.2 1MT1360-151MF 150 ±20% 300.0 350.0 2.0 2.7 1MT1365-R22MF 1MT1365-R33MF 0.22 0.33 ±20% ±20% 0.6 0.8 0.7 0.9 47.0 41.0 110.0 65.0 1MT1365-R47MF 0.47 ±20% 1.0 1.2 38.0 60.0 1MT1365-R56MF 0.56 ±20% 1.2 1.4 35.0 60.0 1MT1365-R68MF 0.68 ±20% 1.4 1.6 32.0 60.0 1MT1365-R82MF 0.82 ±20% 1.6 1.9 30.0 50.0 1MT1365-1R0MF 1.0 ±20% 1.7 2.0 28.0 49.0 1MT1365-1R5MF 1.5 ±20% 2.5 3.0 25.0 45.0 1MT1365-2R2MF 2.2 ±20% 3.5 4.2 20.0 40.0 1MT1365-3R3MF 3.3 ±20% 5.7 6.8 15.0 35.0 1MT1365-4R7MF 4.7 ±20% 8.0 8.7 13.0 30.0 1MT1365-5R6MF 6.0 ±20% 9.3 10.0 12.0 26.0 1MT1365-6R8MF 6.8 ±20% 13.1 14.0 10.0 17.0 1MT1365-8R2MF 8.2 ±20% 14.5 15.5 9.5 16.0 1MT1365-100MF 10 ±20% 15.8 16.8 9.0 15.0 1MT1365-120MF 12 ±20% 19.5 22.0 8.0 14.0 1MT1365-150MF 15 ±20% 40.0 43.0 5.5 12.0 1MT1365-180MF 18 ±20% 40.0 43.0 5.5 12.0 1MT1365-220MF 22 ±20% 42.0 45.0 5.5 8.0 1MT1365-270MF 27 ±20% 48.0 53.0 5.0 7.0 1MT1365-330MF 33 ±20% 54.0 60.0 5.0 6.0 1MT1365-390MF 39 ±20% 60.0 65.0 4.5 5.0 1. 2. 3. 4. 5. Inductance measured @ 100KHz, 0.3V at 25°C temperature. DCR measured @ 25°C. Irms: DC current for an approximate 40°C rise from 20°C ambient temperature. Isat: DC current for approximate 25% L roll off at 25°C. Specifications subject to change without notice please check our website for latest information. Accetek Electronics (Shenzhen) Co., Ltd. 50 www.accetek.com Catalog-Power Inductor-2015A 1MT Series High Current Shielded Power Inductor Accetek E TAPE AND REEL SPECIFICATIONS D P0 P P1 H B A C W E T Case Size Parts per Reel 1MT201210 Reel Dimensions(REF) Tape Dimensions(REF) A B C D E W P P0 P1 H T 3000 178 60 12 15 8.5 8 4 4 2 1.04 0.22 1MT201610 3000 178 60 12 15 8.5 8 4 4 2 1.15 0.25 1MT201612 3000 178 60 12 15 8.5 8 4 4 2 1.35 0.25 1MT252010 3000 178 60 12 15 8.5 8 4 4 2 1.15 0.25 1MT252012 3000 178 60 12 15 8.5 8 4 4 2 1.35 0.25 1MT322510 3000 178 60 12 15 8.5 8 4 4 2 1.55 0.22 1MT322512 3000 178 60 12 15 8.5 8 4 4 2 1.55 0.22 1MT0412 3000 330 100 13 19 12.4 12 8 4 2 1.6 0.3 1MT0420 1500 330 100 13 19 12.4 12 8 4 2 2.5 0.3 1MT0518 1500 330 100 13 23 16.4 16 12 4 2 2.5 0.3 1MT0520 1500 330 100 13 23 16.4 16 12 4 2 2.5 0.3 1MT0530 1500 330 100 13 23 16.4 16 12 4 2 3.5 0.3 1MT0715 2000 330 100 13 23 16.4 16 12 4 2 1.9 0.3 1MT0718 1500 330 100 13 23 16.4 16 12 4 2 2.3 0.3 1MT0724 1500 330 100 13 23 16.4 16 12 4 2 2.9 0.3 1MT0730 1500 330 100 13 23 16.4 16 12 4 2 3.3 0.3 1MT0750 1000 330 100 13 23 16.4 16 12 4 2 5.5 0.3 1MT1030 1000 330 100 13 31 24.5 24 16 4 2 3.5 0.3 1MT1040 800 330 100 13 31 24.5 24 16 4 2 4.5 0.3 1MT1330 750 330 100 13 31 24.5 24 16 4 2 4.0 0.3 1MT1350 400 330 100 13 31 24.5 24 16 4 2 5.5 0.3 1MT1360 500 330 100 13 31 24.5 24 16 4 2 6.5 0.3 1MT1365 500 330 100 13 31 24.5 24 16 4 2 7.0 0.3 Accetek Electronics (Shenzhen) Co., Ltd. www.accetek.com Catalog-Power Inductor-2015A 51 1MK Series Ultra-low profile Multilayer Power Inductor Accetek A FEATURES Multilayer construction with ultra-low profile Suitable for applications with high currents up to 2.1A High saturation current up to 2.1A Magnetically shielded construction Operating Temperature range from -40°C to +125°C (Including Self-heating) 260°C reflow peak temperature qualified B PART NUMBER SYSTEM 1MK 201206 ❶ ❷ - 100 M F ❸ ❹ ❺ ❶ Series 1MK Series Code Dimension Code (L*W*H) (mm) ❷ 160805(1.6×0.8×0.5) 160809(1.6×0.8×0.9) 201206(2.0×1.25×0.5) 201210(2.0×1.25×0.9) 201214(2.0×1.25×1.25) 201610(2.0×1.6×0.9) 201612(2.0×1.6×1.1) 252010(2.5×2.0×0.9) 252012(2.5×2.0×1.1) ❸ Inductance Code ❹ Inductance Tolerance e.g. Calculation M ±20% 2R2 2.2μH 100 10×100μH = 10μH 101 C RoHS Compliant ❺ 1 10×10 μH = 100μH DRAWINGS AND DIMENSIONS Drawing Schematic C A I I 1 B H J D 2 Land Pattern Case Size Dimensions (mm) A B C D Href. Iref. Jref. 1MK160805 1.6±0.15 0.8±0.15 0.5±0.05 0.3±0.2 1.0 0.55 0.7 1MK160809 1.6±0.15 0.8±0.15 0.8±0.15 0.3±0.2 1.0 0.55 0.7 1MK201206 2.0±0.2 1.25±0.2 0.5±0.1 0.5±0.3 1.45 0.7 0.8 1MK201210 2.0±0.2 1.25±0.2 0.9±0.1 0.5±0.3 1.45 0.7 0.8 1MK201214 2.0±0.2 1.25±0.2 1.25±0.1 0.5±0.3 1.45 0.7 0.8 1MK201610 2.0±0.2 1.6±0.2 0.9±0.1 0.5±0.3 1.8 0.8 0.8 1MK201612 2.0±0.2 1.6±0.2 1.1±0.1 0.5±0.3 1.8 0.8 0.8 1MK252010 2.5±0.2 2.0±0.2 0.9±0.1 0.5±0.3 2.2 0.8 1.2 1MK252012 2.5±0.2 2.0±0.2 1.1±0.1 0.5±0.3 2.2 0.8 1.2 Accetek Electronics (Shenzhen) Co., Ltd. 52 www.accetek.com Catalog-Power Inductor-2015A 1MK Series Ultra-low profile Multilayer Power Inductor Accetek D SPECIFICATIONS Inductance DCR SRFmin Part Number μH Tolerance Typ.(Ω) Max.(Ω) Irms(A) Isat(A) MHz 1MK160805-R22MF 0.22 ±20% 0.120 0.150 1.20 1.45 180 1MK160805-R33MF 0.33 ±20% 0.160 0.200 1.10 1.35 140 1MK160805-R47MF 0.47 ±20% 0.180 0.225 1.15 1.05 120 1MK160805-R68MF 0.68 ±20% 0.220 0.275 0.90 0.80 100 1MK160805-1R0MF 1.0 ±20% 0.320 0.400 0.80 0.70 90 1MK160809-R22MF 0.22 ±20% 0.100 0.125 1.25 1.60 200 1MK160809-R33MF 0.33 ±20% 0.130 0.162 1.20 1.50 190 1MK160809-R47MF 0.47 ±20% 0.150 0.187 1.10 1.20 180 1MK160809-R68MF 0.68 ±20% 0.180 0.225 1.15 1.10 160 1MK160809-1R0MF 1.0 ±20% 0.200 0.250 1.00 0.80 125 1MK160809-1R5MF 1.5 ±20% 0.230 0.285 0.90 0.50 100 1MK160809-2R2MF 2.2 ±20% 0.300 0.375 0.85 0.30 80 1MK201206-R47MF 1MK201206-1R0MF 0.47 1 ±20% ±20% 0.120 0.190 0.150 0.237 1.10 0.80 1.30 0.70 80 40 1MK201206-1R5MF 1.5 ±20% 0.260 0.325 0.70 0.50 35 1MK201206-2R2MF 2.2 ±20% 0.320 0.400 0.60 0.35 30 1MK201210-R47MF 0.47 ±20% 0.080 0.100 1.50 1.20 100 1MK201210-1R0MF 1 ±20% 0.110 0.137 1.30 1.15 60 1MK201210-1R5MF 1.5 ±20% 0.160 0.200 1.10 0.80 50 1MK201210-2R2MF 2.2 ±20% 0.200 0.250 0.90 0.60 40 1MK201210-3R3MF 3.3 ±20% 0.200 0.250 0.90 0.35 30 1MK201210-4R7MF 4.7 ±20% 0.250 0.312 0.80 0.28 30 1MK201214-4R7MF 4.7 ±20% 0.400 0.500 0.75 0.63 20 1MK201214-6R8MF 6.8 ±20% 0.300 0.375 1.00 0.25 45 1MK201214-100MF 10 ±20% 0.300 0.375 1.00 0.13 35 1MK201610-R47MF 1MK201610-1R0MF 0.47 1 ±20% ±20% 0.080 0.090 0.100 0.112 1.50 1.40 1.60 1.20 100 70 1MK201610-1R5MF 1.5 ±20% 0.110 0.137 1.20 0.70 60 1MK201610-2R2MF 2.2 ±20% 0.110 0.137 1.20 0.50 50 1MK201610-3R3MF 3.6 ±20% 0.120 0.150 1.20 0.33 40 1MK201610-4R7MF 4.7 ±20% 0.140 0.175 1.10 0.22 30 1MK201612-6R8MF 6.8 ±20% 0.170 0.212 1.20 0.22 40 1MK201612-100MF 10 ±20% 0.250 0.312 1.10 0.20 35 1MK252010-R47MF 1MK252010-1R0MF 0.47 1 ±20% ±20% 0.040 0.060 0.050 0.075 1.80 1.60 1.50 1.40 105 70 1MK252010-1R5MF 1.5 ±20% 0.070 0.087 1.50 1.20 65 1MK252010-2R2MF 2.2 ±20% 0.200 0.250 1.20 1.50 60 1MK252010-3R3MF 3.3 ±20% 0.250 0.312 1.10 1.20 55 1MK252010-4R7MF 4.7 ±20% 0.380 0.475 0.90 0.75 35 1MK252010-6R8MF 6.8 ±20% 0.450 0.562 0.75 0.35 30 1MK252010-100MF 10 ±20% 0.500 0.625 0.70 0.25 25 1MK252012-1R0MF 1 ±20% 0.085 0.106 2.10 2.10 85 1MK252012-2R2MF 2.2 ±20% 0.250 0.312 1.10 1.60 50 1MK252012-3R3MF 3.3 ±20% 0.250 0.312 1.10 1.25 50 1MK252012-4R7MF 4.7 ±20% 0.400 0.500 0.90 0.80 35 1MK252012-6R8MF 6.8 ±20% 0.500 0.625 0.80 0.75 30 1MK252012-100MF 10 ±20% 0.500 0.625 0.80 0.50 25 1. 2. 3. 4. 5. Inductance measured @ 1MHz at 25°C temperature. DCR measured @ 25°C. Irms: DC current for an approximate 40°C rise from 20°C ambient temperature. Isat: DC Current for approximate 30% L roll off at 25°C. Specifications subject to change without notice please check our website for latest information. Accetek Electronics (Shenzhen) Co., Ltd. www.accetek.com Catalog-Power Inductor-2015A 53 1MK Series Ultra-low profile Multilayer Power Inductor Accetek E TAPE AND REEL SPECIFICATIONS T P1 H W B A C P0 P D T E Paper Case Size Carrier Parts per Reel 1MK160805 Paper 1MK160809 1MK201206 Reel Dimensions(REF) Tape Dimensions(REF) A B C D E W P P0 P1 Tmax H 5000 178 58 13 13 9.0 8 4 4 2 0.7 / Paper 4000 178 58 13 13 9.0 8 4 4 2 1.1 / Paper 5000 178 58 13 13 9.0 8 4 4 2 0.8 / 1MK201210 Plastic 3000 178 58 13 13 9.0 8 4 4 2 0.3 1.45 1MK201214 Plastic 3000 178 58 13 13 9.0 8 4 4 2 0.3 1.80 1MK201610 Plastic 3000 178 58 13 13 9.0 8 4 4 2 0.3 1.45 1MK201612 Plastic 3000 178 58 13 13 9.0 8 4 4 2 0.3 1.60 1MK252010 Plastic 3000 178 58 13 13 9.0 8 4 4 2 0.3 1.45 1MK252012 Plastic 3000 178 58 13 13 9.0 8 4 4 2 0.3 1.60 Accetek Electronics (Shenzhen) Co., Ltd. 54 Plastic www.accetek.com Catalog-Power Inductor-2015A 1MZ Series Radial Leaded Power Inductor Accetek A FEATURES Flat bottom design Low DC-resistance Flame retardant polyolefin wrap to protect the winding Current ratings up to 8.5 Amps Inductance values from 1.0µH to 18mH Operating Temperature range from -40°C to +125°C (Including Self-heating) Custom design on request B PART NUMBER SYSTEM 1MZ 0810 ❶ ❷ - 100 M F B ❸ ❹ ❺ ❻ ❶ Series 1MZ Series Code Dimension Code (D*H) (mm) ❷ 0807 (Φ9.5max×7.5max) 0810 (Φ9.5max×11.5max) 1010 (Φ11.0max×11.5max) 1014 (Φ11.0max×14.5max) ❸ Inductance Code ❹ Inductance Tolerance e.g. Calculation K ±10% 2R2 2.2μH M ±20% 100 0 10×10 μH = 10μH 101 10×101μH = 100μH ❻ Packing Method T Tray Plate B Bulk in Plastic Bag ❺ C RoHS Compliant DRAWINGS AND DIMENSIONS Drawings A B Schematic C 1 E 2 D Case Size Dimensions (mm) Amax Bmax Cref Dref E 1MZ0608 7.0 8.5 4.0 0.6 2.5±0.5 1MZ0807 9.5 7.5 4.0 0.6 5.0±0.5 1MZ0810 9.5 11.5 4.0 0.6 5.0±0.5 1MZ1010 11.0 11.5 4.0 0.6 5.0±0.5 1MZ1014 11.0 14.5 4.0 0.6 5.0±0.5 Accetek Electronics (Shenzhen) Co., Ltd. www.accetek.com Catalog-Power Inductor-2015A 55 1MZ Series Radial Leaded Power Inductor Accetek D SPECIFICATIONS Inductance Part Number 1MZ0608-1R0MF_ μH 1.0 Tolerance ±20% DCR Irms Isat Max.(Ω) A A 0.015 8.50 8.00 SRFtyp. MHz 140 1MZ0608-2R2MF_ 2.2 ±20% 0.020 6.30 4.30 65 1MZ0608-3R3MF_ 3.3 ±20% 0.025 4.70 4.00 48 1MZ0608-4R7MF_ 4.7 ±20% 0.030 4.20 3.70 40 1MZ0608-6R8MF_ 6.8 ±20% 0.034 3.30 3.00 32 1MZ0608-100KF_ 10 ±10% 0.080 2.50 2.60 28 1MZ0608-220KF_ 22 ±10% 0.130 1.80 1.70 15 1MZ0608-330KF_ 33 ±10% 0.220 1.40 1.40 14 1MZ0608-470KF_ 47 ±10% 0.340 1.18 1.20 10.6 1MZ0608-680KF_ 68 ±10% 0.400 0.80 1.00 7.5 1MZ0608-820KF_ 82 ±10% 0.470 0.80 0.90 7.2 1MZ0608-101KF_ 100 ±10% 0.550 0.80 0.80 7.1 1MZ0608-221KF_ 220 ±10% 1.200 0.50 0.50 4.2 1MZ0608-471KF_ 470 ±10% 2.400 0.35 0.40 2.9 1MZ0608-681KF_ 680 ±10% 3.700 0.25 0.30 2.4 1MZ0608-102KF_ 1000 ±10% 6.000 0.25 0.27 1.8 1MZ0608-152KF_ 1500 ±10% 8.000 0.19 0.20 1.4 1MZ0608-222KF_ 2200 ±10% 11.800 0.16 0.18 1.2 1MZ0807-1R0MF_ 1MZ0807-2R2MF_ 1.0 2.2 ±20% ±20% 0.008 0.012 8.50 7.50 10.00 6.00 180 80 1MZ0807-2R7MF_ 2.7 ±20% 0.014 6.54 5.50 40 1MZ0807-3R3MF_ 3.3 ±20% 0.017 5.97 5.00 40 1MZ0807-3R9MF_ 3.9 ±20% 0.020 5.26 4.50 40 1MZ0807-4R7MF_ 4.7 ±20% 0.024 4.98 4.20 40 1MZ0807-5R6MF_ 5.6 ±20% 0.028 4.83 4.00 40 1MZ0807-6R8MF_ 6.8 ±20% 0.033 4.55 3.60 30 1MZ0807-8R2MF_ 8.2 ±20% 0.035 4.27 3.30 30 1MZ0807-100KF_ 10 ±10% 0.040 4.20 3.10 30 1MZ0807-120KF_ 12 ±10% 0.050 3.56 2.80 30 1MZ0807-150KF_ 15 ±10% 0.065 3.20 2.50 25 1MZ0807-180KF_ 18 ±10% 0.078 2.94 2.30 20 1MZ0807-220KF_ 22 ±10% 0.100 2.70 2.10 20 1MZ0807-270KF_ 27 ±10% 0.110 2.42 1.90 17 1MZ0807-330KF_ 33 ±10% 0.120 2.13 1.70 15 1MZ0807-390KF_ 39 ±10% 0.160 2.06 1.60 13 1MZ0807-470KF_ 47 ±10% 0.190 1.85 1.45 12 1MZ0807-560KF_ 56 ±10% 0.210 1.71 1.30 11 1MZ0807-680KF_ 68 ±10% 0.280 1.56 1.20 10 1MZ0807-820KF_ 82 ±10% 0.330 1.42 1.10 9 1MZ0807-101KF_ 100 ±10% 0.400 1.30 1.00 8 1MZ0807-121KF_ 120 ±10% 0.450 1.14 0.90 7 1MZ0807-151KF_ 150 ±10% 0.510 1.02 0.80 6 1MZ0807-181KF_ 180 ±10% 0.700 0.90 0.70 5 1MZ0807-221KF_ 220 ±10% 0.800 0.85 0.65 5 1MZ0807-271KF_ 270 ±10% 0.900 0.78 0.60 4.5 1MZ0807-331KF_ 330 ±10% 1.160 0.71 0.55 4.5 1MZ0807-391KF_ 390 ±10% 1.310 0.57 0.45 3.5 1MZ0807-471KF_ 470 ±10% 1.750 0.51 0.40 2.9 1MZ0807-561KF_ 560 ±10% 1.950 0.50 0.38 2.7 1MZ0807-681KF_ 680 ±10% 2.200 0.44 0.35 2.6 1MZ0807-821KF_ 820 ±10% 3.000 0.41 0.32 2.6 1MZ0807-102KF_ 1000 ±10% 3.400 0.40 0.30 2.6 1MZ0807-122KF_ 1200 ±10% 4.500 0.34 0.28 2.3 1MZ0807-152KF_ 1500 ±10% 5.200 0.30 0.25 2.1 Accetek Electronics (Shenzhen) Co., Ltd. 56 www.accetek.com Catalog-Power Inductor-2015A 1MZ Series Radial Leaded Power Inductor Accetek Inductance DCR Irms Isat SRFtyp. μH Tolerance Max.(Ω) A A MHz 1MZ0807-182KF_ 1800 ±10% 5.800 0.28 0.22 1.8 1MZ0807-222KF_ 2200 ±10% 8.000 0.26 0.20 1.5 1MZ0807-272KF_ 2700 ±10% 8.900 0.24 0.18 1.2 1MZ0807-332KF_ 3300 ±10% 11.800 0.19 0.15 1.1 1MZ0807-392KF_ 3900 ±10% 13.100 0.16 0.12 1.0 1MZ0807-472KF_ 4700 ±10% 17.600 0.15 0.10 1.0 1MZ0807-562KF_ 5600 ±10% 19.600 0.15 0.10 0.9 Part Number 1MZ0807-682KF_ 6800 ±10% 27.000 0.14 0.10 0.8 1MZ0807-822KF_ 8200 ±10% 30.000 0.14 0.10 0.7 1MZ0807-103KF_ 10000 ±10% 34.000 0.13 0.10 0.7 1MZ0807-123KF_ 12000 ±10% 46.000 0.13 0.08 0.6 1MZ0807-153KF_ 15000 ±10% 53.000 0.11 0.06 0.5 1MZ0807-183KF_ 18000 ±10% 56.000 0.10 0.05 0.5 1MZ0810-100KF_ 1MZ0810-120KF_ 10 12 ±10% ±10% 0.030 0.035 5.30 5.10 4.20 3.90 22.00 20.00 1MZ0810-150KF_ 15 ±10% 0.040 4.80 3.60 17.00 1MZ0810-180KF_ 18 ±10% 0.040 4.50 3.30 15.00 1MZ0810-220KF_ 22 ±10% 0.050 4.20 2.90 12.00 1MZ0810-270KF_ 27 ±10% 0.055 3.90 2.60 12.00 1MZ0810-330KF_ 33 ±10% 0.075 3.60 2.40 11.00 1MZ0810-390KF_ 39 ±10% 0.085 3.30 2.20 10.30 1MZ0810-470KF_ 47 ±10% 0.100 3.00 2.00 9.50 1MZ0810-560KF_ 56 ±10% 0.120 2.70 1.80 8.60 1MZ0810-680KF_ 68 ±10% 0.150 2.40 1.60 7.50 1MZ0810-820KF_ 82 ±10% 0.190 2.10 1.50 6.60 1MZ0810-101KF_ 100 ±10% 0.200 1.80 1.40 5.50 1MZ0810-121KF_ 120 ±10% 0.240 1.70 1.20 5.30 1MZ0810-151KF_ 150 ±10% 0.340 1.60 1.10 4.50 1MZ0810-181KF_ 180 ±10% 0.360 1.50 1.00 4.40 1MZ0810-221KF_ 220 ±10% 0.480 1.40 0.92 4.40 1MZ0810-271KF_ 270 ±10% 0.550 1.30 0.84 4.00 1MZ0810-331KF_ 330 ±10% 0.650 1.10 0.75 3.50 1MZ0810-391KF_ 390 ±10% 0.850 1.00 0.70 3.00 1MZ0810-471KF_ 470 ±10% 1.000 0.90 0.63 2.50 1MZ0810-561KF_ 560 ±10% 1.100 0.80 0.58 2.30 1MZ0810-681KF_ 680 ±10% 1.400 0.70 0.52 2.00 1MZ0810-821KF_ 820 ±10% 1.900 0.60 0.48 2.00 1MZ0810-102KF_ 1000 ±10% 2.200 0.50 0.43 2.00 1MZ0810-122KF_ 1200 ±10% 2.800 0.47 0.40 1.60 1MZ0810-152KF_ 1500 ±10% 3.200 0.45 0.35 1.30 1MZ0810-182KF_ 1800 ±10% 3.600 0.42 0.32 1.30 1MZ0810-222KF_ 2200 ±10% 4.800 0.39 0.29 1.30 1MZ0810-272KF_ 2700 ±10% 5.600 0.36 0.26 1.20 1MZ0810-332KF_ 3300 ±10% 7.600 0.33 0.24 1.00 1MZ0810-392KF_ 3900 ±10% 8.900 0.31 0.22 0.90 1MZ0810-472KF_ 4700 ±10% 9.600 0.28 0.20 0.90 1MZ0810-562KF_ 5600 ±10% 12.000 0.25 0.18 0.80 1MZ0810-682KF_ 6800 ±10% 14.000 0.23 0.16 0.70 1MZ0810-822KF_ 8200 ±10% 17.500 0.20 0.15 0.60 1MZ0810-103KF_ 10000 ±10% 21.000 0.17 0.13 0.60 1MZ0810-123KF_ 12000 ±10% 28.000 0.15 0.12 0.50 1MZ0810-153KF_ 15000 ±10% 32.000 0.14 0.11 0.50 1MZ0810-183KF_ 18000 ±10% 36.000 0.12 0.10 0.40 1MZ1010-100KF_ 1MZ1010-120KF_ 10 12 ±10% ±10% 0.023 0.025 6.00 5.70 6.10 5.60 23.00 20.00 1MZ1010-150KF_ 15 ±10% 0.028 5.40 5.00 19.00 1MZ1010-180KF_ 18 ±10% 0.030 5.00 4.60 16.00 Accetek Electronics (Shenzhen) Co., Ltd. www.accetek.com Catalog-Power Inductor-2015A 57 1MZ Series Radial Leaded Power Inductor Accetek DCR Irms Isat Part Number Inductance μH Tolerance Max.(Ω) A A SRFtyp. MHz 1MZ1010-220KF_ 22 ±10% 0.042 4.70 4.10 15.00 1MZ1010-270KF_ 27 ±10% 0.046 4.40 3.70 12.00 1MZ1010-330KF_ 33 ±10% 0.055 4.10 3.40 11.00 1MZ1010-390KF_ 39 ±10% 0.075 3.80 3.10 10.30 1MZ1010-470KF_ 47 ±10% 0.082 3.50 2.80 9.50 1MZ1010-560KF_ 56 ±10% 0.090 3.20 2.60 8.60 1MZ1010-680KF_ 68 ±10% 0.120 2.80 2.30 7.50 1MZ1010-820KF_ 82 ±10% 0.140 2.50 2.10 7.00 1MZ1010-101KF_ 100 ±10% 0.150 2.20 1.90 7.00 1MZ1010-121KF_ 120 ±10% 0.210 2.10 1.75 6.00 1MZ1010-151KF_ 150 ±10% 0.245 1.90 1.60 5.00 1MZ1010-181KF_ 180 ±10% 0.300 1.80 1.45 5.00 1MZ1010-221KF_ 220 ±10% 0.360 1.70 1.30 4.30 1MZ1010-271KF_ 270 ±10% 0.490 1.60 1.20 4.00 1MZ1010-331KF_ 330 ±10% 0.570 1.40 1.10 3.50 1MZ1010-391KF_ 390 ±10% 0.620 1.30 1.00 3.00 1MZ1010-471KF_ 470 ±10% 0.810 1.20 0.90 3.00 1MZ1010-561KF_ 560 ±10% 0.920 1.05 0.80 2.30 1MZ1010-681KF_ 680 ±10% 1.200 0.93 0.75 2.00 1MZ1010-821KF_ 820 ±10% 1.350 0.80 0.68 2.00 1MZ1010-102KF_ 1000 ±10% 1.450 0.67 0.60 2.00 1MZ1010-122KF_ 1200 ±10% 2.100 0.63 0.55 1.60 1MZ1010-152KF_ 1500 ±10% 2.400 0.59 0.50 1.40 1MZ1010-182KF_ 1800 ±10% 3.500 0.55 0.45 1.30 1MZ1010-222KF_ 2200 ±10% 4.100 0.50 0.41 1.30 1MZ1010-272KF_ 2700 ±10% 5.200 0.47 0.37 1.20 1MZ1010-332KF_ 3300 ±10% 6.000 0.43 0.34 1.00 1MZ1010-392KF_ 3900 ±10% 7.000 0.39 0.31 0.90 1MZ1010-472KF_ 4700 ±10% 8.500 0.35 0.28 0.80 1MZ1010-562KF_ 5600 ±10% 10.000 0.30 0.26 0.80 1MZ1010-682KF_ 6800 ±10% 13.000 0.26 0.23 0.70 1MZ1010-822KF_ 8200 ±10% 15.800 0.22 0.21 0.60 1MZ1010-103KF_ 10000 ±10% 19.000 0.18 0.19 0.60 1MZ1010-123KF_ 12000 ±10% 22.000 0.17 0.17 0.50 1MZ1010-153KF_ 15000 ±10% 29.000 0.15 0.16 0.50 1MZ1010-183KF_ 18000 ±10% 33.000 0.13 0.14 0.40 1MZ1014-101KF_ 1MZ1014-151KF_ 100 150 ±10% ±10% 0.100 0.160 2.40 2.00 2.50 2.10 4.10 3.10 1MZ1014-221KF_ 220 ±10% 0.230 1.60 1.75 2.30 1MZ1014-331KF_ 330 ±10% 0.300 1.40 1.60 2.20 1MZ1014-471KF_ 470 ±10% 0.470 1.15 1.15 1.80 1MZ1014-681KF_ 680 ±10% 0.710 0.90 1.00 1.50 1MZ1014-102KF_ 1000 ±10% 1.000 0.80 0.80 1.10 1MZ1014-122KF_ 1200 ±10% 1.100 0.70 0.75 1.00 1MZ1014-152KF_ 1500 ±10% 1.500 0.68 0.60 0.95 1MZ1014-222KF_ 2200 ±10% 2.100 0.48 0.56 0.83 1MZ1014-332KF_ 3300 ±10% 3.200 0.36 0.40 0.65 1MZ1014-822KF_ 8200 ±10% 7.500 0.30 0.30 0.44 1. 2. 3. 4. Inductance measured @ 100KHz, 0.3V at 25°C temperature. DCR measured @ 25°C. Irms for specified temperature rise from 20°C ambient temperature. Specifications subject to change without notice please check our website for latest information. Accetek Electronics (Shenzhen) Co., Ltd. 58 www.accetek.com Catalog-Power Inductor-2015A 1MZ Series Radial Leaded Power Inductor Accetek E PACKAGING SPECIFICATIONS Packaging Method 1: Tray Plate (Code: T) Tray Size Layers Dimensions (mm) Qty/Layer A0 B0 P0 P1 P2 P3 T 1MZ0608 193 243 19 131.2 17 222 9.5 140 1MZ0807 193 243 19 131.2 17 222 9.5 140 1MZ0810 193 243 19 131.2 17 222 9.5 140 1MZ1010 193 243 19 131.2 17 222 9.5 140 1MZ1014 243 193 51 174 17 153 11 80 Packaging Method 2: Plastic Bag, 200PCS/Plastic Bag (Code: B) Accetek Electronics (Shenzhen) Co., Ltd. www.accetek.com Catalog-Power Inductor-2015A 59 1MZ-L Series Radial Leaded Power Inductor Accetek A FEATURES Low cost, high efficiency option for choke applications Low DC-resistance Current ratings up to 9.5 Amps Inductance values from 1.0μH to 47mH Operating Temperature range from -40°C to +125°C (Including Self-heating) B PART NUMBER SYSTEM 1MZ 0810 L ❶ ❷ ❸ - ❶ Series 1MZ Series Code 100 M F ❹ ❺ ❻ Dimension Code (D*H) (mm) ❷ 0608 (Φ7.5max×10max) 0810 (Φ10.5max×12max) 1012 (Φ12max×15max) ❸ Extended Series Code ❹ Inductance Code ❺ Inductance Tolerance e.g. Calculation K ±10% 2R2 2.2μH M ±20% 100 10×100μH = 10μH 101 10×101μH = 100μH ❻ C RoHS Compliant DRAWINGS AND DIMENSIONS Drawings A B Schematic C 1 XXX E 2 D XXX = Inductance value Case Size Dimensions (mm) Amax Bmax Cref Dref E 1MZ0608L 7.5 10.0 15.0 0.6 3.0±0.5 1MZ0810L 10.5 12.0 15.0 0.6 5.0±0.5 1MZ1012L 12.0 15.0 15.0 0.6 5.0±0.5 Accetek Electronics (Shenzhen) Co., Ltd. 60 www.accetek.com Catalog-Power Inductor-2015A 1MZ-L Series Radial Leaded Power Inductor Accetek D SPECIFICATIONS Inductance Test Freq. Part Number μH Tolerance 1MZ0608L-3R3MF 3.3 ±20% 100KHz DCR Ir Max.(Ω) A 0.016 3.50 1MZ0608L-4R7MF 4.7 ±20% 100KHz 0.020 3.00 1MZ0608L-6R8MF 6.8 ±20% 100KHz 0.022 2.50 1MZ0608L-100KF 10 ±10% 100KHz 0.039 2.00 1MZ0608L-150KF 15 ±10% 100KHz 0.045 1.70 1MZ0608L-220KF 22 ±10% 100KHz 0.062 1.40 1MZ0608L-330KF 33 ±10% 100KHz 0.100 1.10 1MZ0608L-470KF 47 ±10% 100KHz 0.150 0.95 1MZ0608L-680KF 68 ±10% 100KHz 0.220 0.80 1MZ0608L-101KF 100 ±10% 100KHz 0.350 0.65 1MZ0608L-151KF 150 ±10% 100KHz 0.430 0.54 1MZ0608L-221KF 220 ±10% 100KHz 0.900 0.44 1MZ0608L-331KF 330 ±10% 100KHz 1.500 0.36 1MZ0608L-471KF 470 ±10% 100KHz 1.800 0.30 1MZ0608L-681KF 680 ±10% 100KHz 2.500 0.25 1MZ0608L-102KF 1000 ±10% 100KHz 3.200 0.20 1MZ0608L-122KF 1200 ±10% 100KHz 3.500 0.18 1MZ0608L-152KF 1500 ±10% 100KHz 4.500 0.17 1MZ0608L-182KF 1800 ±10% 100KHz 5.000 0.10 1MZ0608L-222KF 2200 ±10% 100KHz 6.800 0.14 1MZ0608L-272KF 2700 ±10% 100KHz 7.200 0.12 1MZ0608L-332KF 3300 ±10% 100KHz 10.50 0.11 1MZ0608L-392KF 3900 ±10% 100KHz 11.70 0.10 1MZ0608L-472KF 4700 ±10% 100KHz 13.60 0.09 1MZ0608L-562KF 5600 ±10% 100KHz 16.60 0.08 1MZ0608L-682KF 6800 ±10% 100KHz 19.60 0.08 1MZ0608L-822KF 8200 ±10% 100KHz 25.20 0.07 1MZ0608L-103KF 10000 ±10% 100KHz 29.50 0.06 1MZ0810L-3R3MF 1MZ0810L-3R9MF 3.3 3.9 ±20% ±20% 100KHz 100KHz 0.012 0.014 5.00 4.60 1MZ0810L-4R7MF 4.7 ±20% 100KHz 0.016 4.30 1MZ0810L-5R6MF 5.6 ±20% 100KHz 0.020 3.90 1MZ0810L-6R8MF 6.8 ±20% 100KHz 0.022 3.70 1MZ0810L-8R2MF 8.2 ±20% 100KHz 0.024 3.50 1MZ0810L-100KF 10 ±10% 100KHz 0.025 3.20 1MZ0810L-120KF 12 ±10% 100KHz 0.027 3.00 1MZ0810L-150KF 15 ±10% 100KHz 0.033 2.80 1MZ0810L-180KF 18 ±10% 100KHz 0.039 2.60 1MZ0810L-220KF 22 ±10% 100KHz 0.047 2.40 1MZ0810L-270KF 27 ±10% 100KHz 0.052 2.10 1MZ0810L-330KF 33 ±10% 100KHz 0.075 1.90 1MZ0810L-390KF 39 ±10% 100KHz 0.082 1.70 1MZ0810L-470KF 47 ±10% 100KHz 0.100 1.50 1MZ0810L-560KF 56 ±10% 100KHz 0.150 1.30 1MZ0810L-680KF 68 ±10% 100KHz 0.180 1.20 1MZ0810L-820KF 82 ±10% 100KHz 0.200 1.10 1MZ0810L-101KF 100 ±10% 100KHz 0.210 0.90 1MZ0810L-121KF 120 ±10% 100KHz 0.220 0.80 1MZ0810L-151KF 150 ±10% 100KHz 0.240 0.72 1MZ0810L-181KF 180 ±10% 100KHz 0.280 0.65 1MZ0810L-221KF 220 ±10% 100KHz 0.350 0.60 1MZ0810L-271KF 270 ±10% 100KHz 0.400 0.55 1MZ0810L-331KF 330 ±10% 100KHz 0.470 0.50 1MZ0810L-391KF 390 ±10% 100KHz 0.680 0.46 Accetek Electronics (Shenzhen) Co., Ltd. www.accetek.com Catalog-Power Inductor-2015A 61 1MZ-L Series Radial Leaded Power Inductor Accetek Inductance Test Freq. Part Number μH Tolerance 1MZ0810L-471KF 470 ±10% 1MZ0810L-561KF 560 1MZ0810L-681KF 680 1MZ0810L-821KF DCR Ir Max.(Ω) A 100KHz 0.800 0.42 ±10% 100KHz 1.000 0.38 ±10% 100KHz 1.200 0.35 820 ±10% 100KHz 1.500 0.31 1MZ0810L-102KF 1000 ±10% 100KHz 1.800 0.28 1MZ0810L-122KF 1200 ±10% 100KHz 2.000 0.25 1MZ0810L-152KF 1500 ±10% 100KHz 2.400 0.23 1MZ0810L-182KF 1800 ±10% 100KHz 2.800 0.21 1MZ0810L-222KF 2200 ±10% 100KHz 3.300 0.19 1MZ0810L-272KF 2700 ±10% 100KHz 5.000 0.17 1MZ0810L-332KF 3300 ±10% 100KHz 5.600 0.15 1MZ0810L-392KF 3900 ±10% 100KHz 6.200 0.14 1MZ0810L-472KF 4700 ±10% 100KHz 7.000 0.13 1MZ1012L-1R0MF 1MZ1012L-1R5MF 1.0 1.5 ±20% ±20% 100KHz 100KHz 0.011 0.012 5.00 4.80 1MZ1012L-1R8MF 1.8 ±20% 100KHz 0.013 4.70 1MZ1012L-2R7MF 2.7 ±20% 100KHz 0.015 4.60 1MZ1012L-3R3MF 3.3 ±20% 100KHz 0.017 4.50 1MZ1012L-3R9MF 3.9 ±20% 100KHz 0.019 4.30 1MZ1012L-4R7MF 4.7 ±20% 100KHz 0.020 4.00 1MZ1012L-5R6MF 5.6 ±20% 100KHz 0.023 3.80 1MZ1012L-6R8MF 6.8 ±20% 100KHz 0.025 3.50 1MZ1012L-8R2MF 8.2 ±20% 100KHz 0.027 3.00 1MZ1012L-100KF 10 ±10% 100KHz 0.035 2.80 1MZ1012L-120KF 12 ±10% 100KHz 0.040 2.70 1MZ1012L-150KF 15 ±10% 100KHz 0.045 2.30 1MZ1012L-180KF 18 ±10% 100KHz 0.050 2.10 1MZ1012L-220KF 22 ±10% 100KHz 0.060 2.00 1MZ1012L-270KF 27 ±10% 100KHz 0.070 1.70 1MZ1012L-330KF 33 ±10% 100KHz 0.100 1.50 1MZ1012L-390KF 39 ±10% 100KHz 0.120 1.40 1MZ1012L-470KF 47 ±10% 100KHz 0.125 1.30 1MZ1012L-560KF 56 ±10% 100KHz 0.130 1.20 1MZ1012L-680KF 68 ±10% 100KHz 0.140 1.00 1MZ1012L-820KF 82 ±10% 100KHz 0.150 0.90 1MZ1012L-101KF 100 ±10% 100KHz 0.160 0.70 1MZ1012L-121KF 120 ±10% 100KHz 0.250 0.68 1MZ1012L-151KF 150 ±10% 100KHz 0.280 0.65 1MZ1012L-181KF 180 ±10% 100KHz 0.320 0.60 1MZ1012L-221KF 220 ±10% 100KHz 0.470 0.50 1MZ1012L-271KF 270 ±10% 100KHz 0.530 0.45 1MZ1012L-331KF 330 ±10% 100KHz 0.600 0.40 1MZ1012L-391KF 390 ±10% 100KHz 0.850 0.35 1MZ1012L-471KF 470 ±10% 100KHz 0.950 0.33 1MZ1012L-561KF 560 ±10% 100KHz 1.100 0.30 1MZ1012L-681KF 680 ±10% 100KHz 1.200 0.25 1MZ1012L-821KF 820 ±10% 100KHz 1.300 0.20 1MZ1012L-102KF 1000 ±10% 100KHz 1.400 0.18 1MZ1012L-103KF 10000 ±10% 100KHz 2.900 0.15 1MZ1012L-223KF 22000 ±10% 100KHz 4.500 0.11 1MZ1012L-333KF 33000 ±10% 100KHz 5.700 0.08 1MZ1012L-473KF 47000 ±10% 100KHz 7.200 0.06 1. 2. 3. 4. Inductance measured @ 100KHz, 0.3V at 25°C temperature. DCR measured @ 25°C. Irms for specified temperature rise from 20°C ambient temperature. Specifications subject to change without notice please check our website for latest information. Accetek Electronics (Shenzhen) Co., Ltd. 62 www.accetek.com Catalog-Power Inductor-2015A 1MZ-L Series Radial Leaded Power Inductor Accetek E PACKAGING SPECIFICATIONS Standard Packaging: 200PCS/Plastic Bag Accetek Electronics (Shenzhen) Co., Ltd. www.accetek.com Catalog-Power Inductor-2015A 63 2MA Series Dual Winding Shielded Inductor/Transformer Accetek A FEATURES Dual winding shielded inductor can be used as single/dual/coupled inductor or 1:1 transformer Operating Temperature range from -40°C to +125°C (Including Self-heating) 260°C reflow peak temperature qualified Inductance up to 1000μH in parallel mode for all case size High strength sealing epoxy with stable temperatures character to keep the parts strong at wide range temperatures: (Typical Hardness: ShoreD 86 @25°C, ShoreD 70 @125°C) Available for 4 case size, up to 129 size (12.5×12.5×10.0mm) to meet with higher current requirements Recommend for SEPIC and Flyback applications Custom designs on request B PART NUMBER SYSTEM 2MA 125 ❶ ❷ - 100 M F ❸ ❹ ❺ ❶ Series 2MA Series Code ❸ Inductance Code e.g. Calculation 2R2 2.2μH 100 10×100μH = 10μH ❺ 74 (7.6×7.6×4.6) 125 (12.5×12.5×6.0) 127 (12.5×12.5×8.0) 129 (12.5×12.5×10.0) RoHS Compliant 1 101 10×10 μH = 100μH ❹ Inductance Tolerance K ±10% M ±20% N ±30% C Dimension Code (L*W*H) (mm) ❷ DRAWINGS AND DIMENSIONS 2MA74 7,60 Max 1 [0,299] 2 XXX 4 4 1 3 3 2 7,50 [0,295] 0,85 Typ [0,033] 2,80 [0,110] 7,60 Max 4,60 Max [0,299] [0,181] 1.45 Typ [0,057] Accetek Electronics (Shenzhen) Co., Ltd. 64 2,20 [0,087] Parallel Mode Land Pattern www.accetek.com 7,50 [0,295] 2,20 [0,087] 7,50 [0,295] 1.00 [0,039] 2,20 [0,087] 0,80 [0,031] Dual Inductor Mode Land Pattern 1.00 [0,039] 0,80 [0,031] Series Mode Land Pattern Catalog-Power Inductor-2015A 2MA Series Dual Winding Shielded Inductor/Transformer Accetek 2MA125 12,50 Max 1 [0,492] 2 XXX 2.00 Typ [0,079] 4 4 1 3 3 2 12,50 Max [0,492] 6.00 Max [0,236] 13,80 [0,543] 5,50 [0,217] 2,50 [0,098] 3,85 [0,152] 2,05 Typ [0,081] 13,80 [0,543] 3,85 [0,152] 13,80 [0,543] 2,50 [0,098] 3,85 0,50 [0,152] [0,020] Parallel Mode Land Pattern 0,50 [0,020] Dual Inductor Mode Land Pattern Series Mode Land Pattern 2MA127 12,50 Max 1 [0,492] 2 XXX 4 4 1 3 3 2 12,50 Max [0,492] 13,80 [0,543] 2.00 Typ [0,079] 5,50 [0,217] 2,50 [0,098] 3,85 [0,152] 2,05 Typ [0,081] 8.00 Max [0,315] 13,80 [0,543] 3,85 [0,152] 13,80 [0,543] 2,50 [0,098] 3,85 0,50 [0,152] [0,020] Parallel Mode Land Pattern 0,50 [0,020] Dual Inductor Mode Land Pattern Series Mode Land Pattern 2MA129 12,50 Max 1 [0,492] 2 XXX 2.00 Typ [0,079] 4 4 1 3 3 2 12,50 Max [0,492] 10.00 Max [0,394] 13,80 [0,543] 5,50 [0,217] 2,50 [0,098] 3,85 [0,152] 2,05 Typ [0,081] 13,80 [0,543] 3,85 [0,152] 13,80 [0,543] 2,50 [0,098] 3,85 0,50 [0,152] [0,020] Parallel Mode Land Pattern 0,50 [0,020] Dual Inductor Mode Land Pattern Series Mode Land Pattern XXX = Inductance value Dot indicates Pin1. Schematics 1 2 L1 1 L1 L2 4 3 2 Parallel Mode Accetek Electronics (Shenzhen) Co., Ltd. 3 1 2 L1 L2 4 Dual Inductor Mode www.accetek.com L2 4 3 Series Mode Catalog-Power Inductor-2015A 65 2MA Series Dual Winding Shielded Inductor/Transformer Accetek D SPECIFICATIONS Parallel Mode L 1 2 Series Mode 2 DCR DCR 3 Irms Isat 4 L 1 DCR2 DCR2 Irms3 Isat4 Part Number (μH) Tolerance Typ.(Ω) Max.(Ω) (A) (A) (μH) Tolerance Typ.(Ω) Max.(Ω) (A) (A) 2MA74-R33NF 0.33 ±30% 0.0074 0.0111 6.20 12.50 1.32 ±30% 0.0296 0.0444 3.10 6.25 2MA74-1R0NF 1.00 ±30% 0.0100 0.0150 5.33 10.20 4.00 ±30% 0.0400 0.0600 2.67 5.10 2MA74-1R5NF 1.50 ±30% 0.0115 0.0173 4.96 7.50 6.00 ±30% 0.0460 0.0690 2.48 3.75 2MA74-2R2NF 2.20 ±30% 0.0130 0.0182 4.66 6.50 8.80 ±30% 0.0520 0.0728 2.33 3.25 2MA74-3R3NF 3.30 ±30% 0.0183 0.0220 3.94 5.20 13.2 ±30% 0.0732 0.0878 1.97 2.60 2MA74-4R7MF 4.70 ±20% 0.0254 0.0305 3.34 4.10 18.8 ±20% 0.1016 0.1219 1.67 2.05 2MA74-5R6MF 5.60 ±20% 0.0350 0.0420 3.00 3.90 22.4 ±20% 0.1400 0.1680 1.50 1.95 2MA74-6R8MF 6.80 ±20% 0.0418 0.0460 2.60 3.70 27.2 ±20% 0.1672 0.1839 1.30 1.85 2MA74-8R2MF 8.20 ±20% 0.0441 0.0485 2.53 3.30 32.8 ±20% 0.1764 0.1940 1.27 1.65 2MA74-100MF 10.0 ±20% 0.0450 0.0490 2.41 2.80 40.0 ±20% 0.1800 0.1960 1.21 1.40 2MA74-120MF 12.0 ±20% 0.0500 0.0580 2.17 2.50 48.0 ±20% 0.2000 0.2320 1.09 1.25 2MA74-150MF 15.0 ±20% 0.0637 0.0764 2.11 2.20 60.0 ±20% 0.2548 0.3058 1.06 1.10 2MA74-180MF 18.0 ±20% 0.0835 0.0910 1.84 2.00 72.0 ±20% 0.3340 0.3640 0.92 1.00 2MA74-220MF 22.0 ±20% 0.0925 0.1100 1.75 1.90 88.0 ±20% 0.3700 0.4400 0.88 0.95 2MA74-270MF 27.0 ±20% 0.125 0.150 1.50 1.70 108 ±20% 0.5000 0.6000 0.75 0.85 2MA74-330MF 33.0 ±20% 0.143 0.170 1.41 1.50 132 ±20% 0.5720 0.6800 0.71 0.75 2MA74-390MF 39.0 ±20% 0.190 0.228 1.22 1.30 156 ±20% 0.7600 0.9120 0.61 0.65 2MA74-470MF 47.0 ±20% 0.216 0.259 1.15 1.20 188 ±20% 0.8640 1.0368 0.58 0.60 2MA74-560MF 56.0 ±20% 0.230 0.276 1.11 1.10 224 ±20% 0.9200 1.1040 0.56 0.55 2MA74-680MF 68.0 ±20% 0.265 0.318 1.03 1.00 272 ±20% 1.060 1.272 0.52 0.50 2MA74-820MF 82.0 ±20% 0.345 0.414 0.91 0.90 328 ±20% 1.380 1.656 0.46 0.45 2MA74-101MF 100 ±20% 0.383 0.460 0.86 0.80 400 ±20% 1.532 1.838 0.43 0.40 2MA74-121MF 120 ±20% 0.515 0.618 0.74 0.70 480 ±20% 2.060 2.472 0.37 0.35 2MA74-151MF 150 ±20% 0.591 0.709 0.69 0.65 600 ±20% 2.364 2.837 0.35 0.33 2MA74-181MF 180 ±20% 0.760 0.912 0.61 0.62 720 ±20% 3.040 3.648 0.31 0.31 2MA74-221MF 220 ±20% 0.907 1.088 0.56 0.59 880 ±20% 3.628 4.354 0.28 0.30 2MA74-271MF 270 ±20% 1.210 1.452 0.48 0.55 1080 ±20% 4.840 5.808 0.24 0.28 2MA74-331MF 330 ±20% 1.410 1.692 0.45 0.49 1320 ±20% 5.640 6.768 0.23 0.25 2MA74-391MF 390 ±20% 1.525 1.830 0.43 0.45 1560 ±20% 6.100 7.320 0.22 0.23 2MA74-471MF 470 ±20% 1.740 2.088 0.40 0.41 1880 ±20% 6.960 8.352 0.20 0.21 2MA74-561MF 560 ±20% 2.220 2.664 0.36 0.38 2240 ±20% 8.880 10.656 0.18 0.19 2MA74-681MF 680 ±20% 2.580 3.096 0.33 0.36 2720 ±20% 10.320 12.384 0.17 0.18 2MA74-821MF 820 ±20% 2.930 3.516 0.31 0.30 3280 ±20% 11.720 14.064 0.16 0.15 2MA74-102MF 1000 ±20% 3.890 4.668 0.27 0.27 4000 ±20% 15.560 18.672 0.14 0.14 2MA125-R47NF 0.47 ±30% 0.0018 0.0027 17.60 25.00 1.88 ±30% 0.0072 0.0108 8.80 12.50 2MA125-1R0NF 1.00 ±30% 0.0024 0.0036 13.18 16.50 4.00 ±30% 0.0096 0.0144 6.59 8.25 2MA125-1R5NF 1.50 ±30% 0.0040 0.0060 10.21 14.40 6.00 ±30% 0.0160 0.0240 5.10 7.20 2MA125-2R2NF 2.20 ±30% 0.0045 0.0063 9.96 11.70 8.80 ±30% 0.0180 0.0252 4.98 5.85 2MA125-3R3NF 3.30 ±30% 0.0063 0.0076 9.09 10.40 13.2 ±30% 0.0252 0.0302 4.55 5.20 2MA125-4R7MF 4.70 ±20% 0.0105 0.0126 7.04 8.72 18.8 ±20% 0.0420 0.0504 3.52 4.36 2MA125-5R6MF 5.60 ±20% 0.0115 0.0150 6.45 7.26 22.4 ±20% 0.0460 0.0600 3.23 3.63 Accetek Electronics (Shenzhen) Co., Ltd. 66 www.accetek.com Catalog-Power Inductor-2015A 2MA Series Dual Winding Shielded Inductor/Transformer Accetek Parallel Mode L 1 2 Series Mode 2 3 DCR DCR Irms Isat 4 L 1 DCR2 DCR2 Irms3 Isat4 Part Number (μH) Tolerance Typ.(Ω) Max.(Ω) (A) (A) (μH) Tolerance Typ.(Ω) Max.(Ω) (A) (A) 2MA125-6R8MF 6.80 ±20% 0.0123 0.0180 5.59 7.12 27.2 ±20% 0.0492 0.0720 2.80 3.56 2MA125-8R2MF 8.20 ±20% 0.0170 0.0210 5.54 6.75 32.8 ±20% 0.0680 0.0840 2.77 3.37 2MA125-100MF 10.0 ±20% 0.0180 0.0250 5.11 5.87 40.0 ±20% 0.0720 0.1000 2.56 2.94 2MA125-120MF 12.0 ±20% 0.0230 0.0270 4.81 4.92 48.0 ±20% 0.0920 0.1080 2.41 2.46 2MA125-150MF 15.0 ±20% 0.0250 0.0300 4.56 4.56 60.0 ±20% 0.1000 0.1200 2.28 2.28 2MA125-180MF 18.0 ±20% 0.0290 0.0340 4.29 4.35 72.0 ±20% 0.1160 0.1360 2.14 2.18 2MA125-220MF 22.0 ±20% 0.0310 0.0360 4.17 3.86 88.0 ±20% 0.1240 0.1440 2.08 1.93 2MA125-270MF 27.0 ±20% 0.0400 0.0510 3.50 3.34 108 ±20% 0.1600 0.2040 1.75 1.67 2MA125-330MF 33.0 ±20% 0.0540 0.0570 3.31 3.06 132 ±20% 0.2160 0.2280 1.66 1.53 2MA125-390MF 39.0 ±20% 0.0580 0.0645 3.11 2.93 156 ±20% 0.2320 0.2580 1.56 1.46 2MA125-470MF 47.0 ±20% 0.0750 0.0820 2.71 2.53 188 ±20% 0.3000 0.3280 1.36 1.26 2MA125-560MF 56.0 ±20% 0.0850 0.0890 2.65 2.39 224 ±20% 0.3400 0.3560 1.32 1.20 2MA125-680MF 68.0 ±20% 0.0945 0.1050 2.44 2.30 272 ±20% 0.3780 0.4200 1.22 1.15 2MA125-820MF 82.0 ±20% 0.120 0.129 2.20 2.05 328 ±20% 0.4800 0.5160 1.10 1.03 2MA125-101MF 100 ±20% 0.139 0.146 2.07 1.79 400 ±20% 0.5560 0.5840 1.03 0.89 2MA125-121MF 120 ±20% 0.159 0.170 1.92 1.62 480 ±20% 0.6360 0.6800 0.96 0.81 2MA125-151MF 150 ±20% 0.185 0.230 1.65 1.50 600 ±20% 0.7400 0.9200 0.82 0.75 2MA125-181MF 180 ±20% 0.234 0.246 1.59 1.33 720 ±20% 0.9360 0.9840 0.80 0.67 2MA125-221MF 220 ±20% 0.306 0.335 1.37 1.22 880 ±20% 1.224 1.340 0.68 0.61 2MA125-271MF 270 ±20% 0.355 0.400 1.25 1.05 1080 ±20% 1.420 1.600 0.63 0.52 2MA125-331MF 330 ±20% 0.482 0.494 1.12 0.95 1320 ±20% 1.928 1.976 0.56 0.48 2MA125-391MF 390 ±20% 0.515 0.533 1.08 0.88 1560 ±20% 2.060 2.132 0.54 0.44 2MA125-471MF 470 ±20% 0.705 0.733 0.92 0.83 1880 ±20% 2.820 2.932 0.46 0.41 2MA125-561MF 560 ±20% 0.776 0.800 0.88 0.77 2240 ±20% 3.104 3.200 0.44 0.38 2MA125-681MF 680 ±20% 0.887 0.910 0.83 0.70 2720 ±20% 3.548 3.640 0.41 0.35 2MA125-821MF 820 ±20% 1.130 1.152 0.74 0.63 3280 ±20% 4.520 4.608 0.37 0.31 2MA125-102MF 1000 ±20% 1.295 1.335 0.68 0.57 4000 ±20% 5.180 5.340 0.34 0.29 2MA127-R47NF 0.47 ±30% 0.00195 0.00300 17.90 26.40 1.88 ±30% 0.0078 0.0120 8.95 13.20 2MA127-1R0NF 1.00 ±30% 0.00261 0.00450 15.50 17.60 4.00 ±30% 0.0104 0.0180 7.75 8.80 2MA127-1R5NF 1.50 ±30% 0.00341 0.00600 13.50 15.00 6.00 ±30% 0.0136 0.0240 6.75 7.50 2MA127-2R2NF 2.20 ±30% 0.00400 0.00680 12.70 14.30 8.80 ±30% 0.0160 0.0272 6.35 7.15 2MA127-3R3NF 3.30 ±30% 0.00680 0.00816 10.40 12.50 13.2 ±30% 0.0272 0.0326 5.20 6.25 2MA127-3R9NF 3.90 ±30% 0.00850 0.01020 8.77 10.56 15.6 ±30% 0.0340 0.0408 4.39 5.28 2MA127-4R7MF 4.70 ±20% 0.00940 0.01128 8.25 10.23 18.8 ±20% 0.0376 0.0451 4.13 5.12 2MA127-5R6MF 5.60 ±20% 0.01080 0.01296 7.47 9.46 22.4 ±20% 0.0432 0.0518 3.74 4.73 2MA127-6R8MF 6.80 ±20% 0.01200 0.01440 7.34 8.80 27.2 ±20% 0.0480 0.0576 3.67 4.40 2MA127-8R2MF 8.20 ±20% 0.01600 0.01920 6.32 8.25 32.8 ±20% 0.0640 0.0768 3.16 4.13 2MA127-100MF 10.0 ±20% 0.01720 0.02000 6.04 7.26 40.0 ±20% 0.0688 0.0800 3.02 3.63 2MA127-120MF 12.0 ±20% 0.02180 0.02400 5.37 6.50 48.0 ±20% 0.0872 0.0960 2.69 3.25 2MA127-150MF 15.0 ±20% 0.02400 0.02700 5.04 6.00 60.0 ±20% 0.0960 0.1080 2.52 3.00 2MA127-180MF 18.0 ±20% 0.03080 0.03696 4.52 5.40 72.0 ±20% 0.1232 0.1478 2.26 2.70 2MA127-220MF 22.0 ±20% 0.03300 0.03960 4.21 5.00 88.0 ±20% 0.1320 0.1584 2.11 2.50 2MA127-270MF 27.0 ±20% 0.03500 0.04200 3.74 3.80 108 ±20% 0.1400 0.1680 1.87 1.90 Accetek Electronics (Shenzhen) Co., Ltd. www.accetek.com Catalog-Power Inductor-2015A 67 2MA Series Dual Winding Shielded Inductor/Transformer Accetek Parallel Mode L 1 2 Series Mode 2 3 DCR DCR Irms Isat 4 L 1 DCR2 DCR2 Irms3 Isat4 Part Number (μH) Tolerance Typ.(Ω) Max.(Ω) (A) (A) (μH) Tolerance Typ.(Ω) Max.(Ω) (A) (A) 2MA127-330MF 33.0 ±20% 0.04700 0.05640 3.58 3.70 132 ±20% 0.1880 0.2256 1.79 1.85 2MA127-390MF 39.0 ±20% 0.05300 0.06360 3.35 3.60 156 ±20% 0.2120 0.2544 1.68 1.80 2MA127-470MF 47.0 ±20% 0.07190 0.08628 2.96 3.45 188 ±20% 0.2876 0.3451 1.48 1.73 2MA127-560MF 56.0 ±20% 0.08020 0.09624 2.80 2.90 224 ±20% 0.3208 0.3850 1.40 1.45 2MA127-680MF 68.0 ±20% 0.09000 0.10800 2.62 2.70 272 ±20% 0.3600 0.4320 1.31 1.35 2MA127-820MF 82.0 ±20% 0.120 0.144 2.23 2.50 328 ±20% 0.4800 0.5760 1.12 1.25 2MA127-101MF 100 ±20% 0.135 0.162 2.16 2.40 400 ±20% 0.5400 0.6480 1.08 1.20 2MA127-121MF 120 ±20% 0.182 0.218 1.86 2.00 480 ±20% 0.7280 0.8736 0.93 1.00 2MA127-151MF 150 ±20% 0.216 0.259 1.71 1.80 600 ±20% 0.8640 1.0368 0.86 0.90 2MA127-181MF 180 ±20% 0.229 0.275 1.66 1.70 720 ±20% 0.9160 1.0992 0.83 0.85 2MA127-221MF 220 ±20% 0.323 0.388 1.39 1.50 880 ±20% 1.292 1.550 0.70 0.75 2MA127-271MF 270 ±20% 0.415 0.498 1.23 1.30 1080 ±20% 1.660 1.992 0.62 0.65 2MA127-331MF 330 ±20% 0.487 0.584 1.14 1.20 1320 ±20% 1.948 2.338 0.57 0.60 2MA127-391MF 390 ±20% 0.533 0.640 1.09 1.10 1560 ±20% 2.132 2.558 0.55 0.55 2MA127-471MF 470 ±20% 0.707 0.848 0.94 1.00 1880 ±20% 2.828 3.394 0.47 0.50 2MA127-561MF 560 ±20% 0.777 0.932 0.90 0.90 2240 ±20% 3.108 3.730 0.45 0.45 2MA127-681MF 680 ±20% 1.045 1.254 0.78 0.80 2720 ±20% 4.180 5.016 0.39 0.40 2MA127-821MF 820 ±20% 1.166 1.399 0.73 0.80 3280 ±20% 4.664 5.597 0.37 0.40 2MA127-102MF 1000 ±20% 1.334 1.601 0.69 0.70 4000 ±20% 5.336 6.403 0.35 0.35 2MA129-R47NF 0.47 ±30% 0.0022 0.0033 17.50 27.50 1.88 ±30% 0.0084 0.0126 8.75 13.75 2MA129-1R0NF 1.00 ±30% 0.0034 0.0051 14.00 25.00 4.00 ±30% 0.0136 0.0204 7.00 12.50 2MA129-2R2NF 2.20 ±30% 0.0050 0.0060 11.50 20.00 8.80 ±30% 0.0200 0.0240 5.75 10.00 2MA129-3R5NF 3.50 ±30% 0.0060 0.0090 11.00 16.50 14.0 ±30% 0.0240 0.0360 5.50 8.25 2MA129-4R7MF 4.70 ±20% 0.0070 0.0110 9.30 13.00 18.8 ±20% 0.0280 0.0440 4.65 6.50 2MA129-6R8MF 6.80 ±20% 0.0090 0.0140 8.40 12.80 27.2 ±20% 0.0360 0.0560 4.20 6.40 2MA129-7R5MF 7.50 ±20% 0.0110 0.0150 7.80 10.60 30.0 ±20% 0.0440 0.0600 3.90 5.30 2MA129-100MF 10.0 ±20% 0.0130 0.0180 7.60 10.50 40.0 ±20% 0.0520 0.0720 3.80 5.25 2MA129-120MF 12.0 ±20% 0.0150 0.0190 7.10 8.80 48.0 ±20% 0.0600 0.0760 3.55 4.40 2MA129-150MF 15.0 ±20% 0.0210 0.0260 6.00 8.00 60.0 ±20% 0.0840 0.1040 3.00 4.00 2MA129-220MF 22.0 ±20% 0.0230 0.0280 5.30 6.50 88.0 ±20% 0.0920 0.1120 2.65 3.25 2MA129-270MF 27.0 ±20% 0.0300 0.0400 4.60 5.80 108 ±20% 0.1200 0.1600 2.30 2.90 2MA129-330MF 33.0 ±20% 0.0370 0.0450 4.20 5.50 132 ±20% 0.1480 0.1800 2.10 2.75 2MA129-390MF 39.0 ±20% 0.0440 0.0560 4.10 5.00 156 ±20% 0.1760 0.2240 2.05 2.50 2MA129-470MF 47.0 ±20% 0.0460 0.0630 3.80 4.50 188 ±20% 0.1840 0.2520 1.90 2.25 2MA129-560MF 56.0 ±20% 0.0540 0.0680 3.40 3.70 224 ±20% 0.2160 0.2720 1.70 1.85 2MA129-680MF 68.0 ±20% 0.0690 0.0890 3.20 3.60 272 ±20% 0.2760 0.3560 1.60 1.80 2MA129-820MF 82.0 ±20% 0.0905 0.1050 2.70 3.40 328 ±20% 0.3620 0.4200 1.35 1.70 2MA129-101MF 100 ±20% 0.100 0.110 2.50 3.10 400 ±20% 0.4000 0.4400 1.25 1.55 2MA129-121MF 120 ±20% 0.130 0.156 2.30 2.60 480 ±20% 0.5200 0.6240 1.15 1.30 2MA129-151MF 150 ±20% 0.139 0.174 2.30 2.40 600 ±20% 0.5560 0.6960 1.15 1.20 2MA129-181MF 180 ±20% 0.153 0.191 2.20 2.30 720 ±20% 0.6120 0.7640 1.10 1.15 2MA129-221MF 220 ±20% 0.193 0.300 1.90 2.20 880 ±20% 0.7720 1.2000 0.95 1.10 2MA129-271MF 270 ±20% 0.248 0.330 1.70 2.10 1080 ±20% 0.9920 1.3200 0.85 1.05 Accetek Electronics (Shenzhen) Co., Ltd. 68 www.accetek.com Catalog-Power Inductor-2015A 2MA Series Dual Winding Shielded Inductor/Transformer Accetek Parallel Mode L 1 2 Series Mode 2 3 DCR DCR Irms Isat 4 L 1 DCR2 DCR2 Irms3 Isat4 Part Number (μH) Tolerance Typ.(Ω) Max.(Ω) (A) (A) (μH) Tolerance Typ.(Ω) Max.(Ω) (A) (A) 2MA129-331MF 330 ±20% 0.363 0.430 1.50 1.70 1320 ±20% 1.452 1.720 0.75 0.85 2MA129-471MF 470 ±20% 0.437 0.560 1.40 1.50 1880 ±20% 1.748 2.240 0.70 0.75 2MA129-561MF 560 ±20% 0.520 0.650 1.20 1.40 2240 ±20% 2.080 2.600 0.60 0.70 2MA129-681MF 680 ±20% 0.660 0.825 1.10 1.30 2720 ±20% 2.640 3.300 0.55 0.65 2MA129-821MF 820 ±20% 0.815 1.000 1.00 1.10 3280 ±20% 3.260 4.000 0.50 0.55 2MA129-102MF 1000 ±20% 0.930 1.200 0.88 1.00 4000 ±20% 3.720 4.800 0.44 0.50 1. 2. 3. 4. 5. 6. E Inductance measured @ 100KHz, 0.3V at 25°C temperature. DCR measured @ 25°C. Irms for an approximate 40°C rise from 20°C ambient temperature. Isat for approximate 10% L roll off at 25°C. Available for custom designs on request Specifications subject to change without notice please check our website for latest information. TAPE AND REEL SPECIFICATIONS D P0 P H 220 W B A C P1 T E Case Size Parts per Reel Reel Dimensions(REF) Tape Dimensions(REF) A B C D E W P P0 P1 H T 2MA74 1000 330 100 13 22.5 16.5 16 12 4 2 7.5 0.4 2MA125 500 330 100 13 30 24.5 24 16 4 2 6.2 0.45 2MA127 500 330 100 13 30 24.5 24 16 4 2 8.2 0.45 2MA129 350 330 100 13 30 24.5 24 16 4 2 10.2 0.45 Accetek Electronics (Shenzhen) Co., Ltd. www.accetek.com Catalog-Power Inductor-2015A 69 2CA Series Common Mode Line Filter Accetek A FEATURES Small dimensions with high current ratings Operating Temperature range from -40°C to +125°C (Including Self-heating) 260°C reflow peak temperature qualified Custom design on request B PART NUMBER SYSTEM 2CA 74 ❶ ❷ - 100 M F ❸ ❹ ❺ ❶ Series 2CA Series Code Dimension Code (L*W*H) (mm) ❷ 74 (7.6×7.6×4.6) 125 (12.5×12.5×6.0) 129 (12.5×12.5×10.0) ❸ Inductance Code e.g. Calculation ❹ Inductance Tolerance 2R2 2.2μH M ±20% 100 0 10×10 μH = 10μH 101 10×101μH = 100μH RoHS Compliant ❺ C DRAWINGS AND DIMENSIONS 2CA74 7,60 Max 1 4 4 1 [0,299] 2 3 3 2 7,60 Max 4,60 Max [0,299] [0,181] 2CA125 13,80 [0,543] 7,50 [0,295] 0,85 Typ [0,033] 12,50 Max 1 [0,492] 2 1.00 [0,039] 1.45 Typ [0,057] 2,20 [0,087] 2.00 Typ [0,079] 4 4 1 3 3 2 0,80 [0,031] 2,50 [0,098] 3,85 0,50 [0,152] [0,020] 12,50 Max [0,492] Land Pattern 2CA129 6.00 Max [0,236] 2,05 Typ [0,081] Land Pattern Schematic 13,80 [0,543] 12,50 Max 1 [0,492] 2 2.00 Typ [0,079] 4 4 1 3 3 2 2,50 [0,098] L1 L2 3,85 0,50 [0,152] [0,020] 12,50 Max [0,492] 10.00 Max [0,394] Accetek Electronics (Shenzhen) Co., Ltd. 70 2,05 Typ [0,081] Land Pattern www.accetek.com Catalog-Common Mode Filter-2015A 2CA Series Common Mode Line Filter Accetek D SPECIFICATIONS L1-3;L2-41 DCR2 Ir3 UDC UT Part Number μH Tolerance Max.(Ω) mA V V(AC) 2CA74-4R7MF 4.7 ±20% 0.090 1250 80 500 2CA74-100MF 10 ±20% 0.120 1100 80 500 2CA74-101MF 100 ±20% 0.950 350 80 500 2CA74-471MF 470 ±20% 4.300 150 80 500 2CA125-1R0MF 1.0 ±20% 0.010 4750 80 500 2CA125-100MF 10 ±20% 0.050 2250 80 500 2CA125-101MF 100 ±20% 0.280 900 80 500 2CA125-102MF 1000 ±20% 2.800 250 80 500 2CA129-100MF 10 ±20% 0.040 2750 80 500 2CA129-101MF 100 ±20% 0.280 1000 80 500 2CA129-102MF 1000 ±20% 2.500 300 80 500 TYPICAL IMPEDANCE CURVES 2CA74-4R7MF 2CA74-100MF 2CA74-101MF 100000 100000 10000 10000 10000 1000 100 Impedance Z [Ohm] 100000 Impedance Z [Ohm] Impedance Z [Ohm] 1000 100 1000 100 10 10 10 1 1 0.1 1 10 0.1 100 1 10 Frequency f [MHz] Z(comm) 1 100 0.1 1 10 Frequency f [MHz] Z(comm) Z(diff) 2CA74-471MF 100 Frequency f [MHz] Z(diff) Z(comm) 2CA125-1R0MF Z(diff) 2CA125-100MF 100000 100000 100000 10000 1000 100 10000 1000 Impedance Z [Ohm] 10000 Impedance Z [Ohm] E Inductance measured @ 100KHz, 0.3V at 25°C temperature. DCR measured @ 25°C. Ir for an approximate 40°C rise from 20°C ambient temperature. Custom designs on request. Specifications subject to change without notice please check our website for latest information. Impedance Z [Ohm] 1. 2. 3. 4. 5. 100 10 1000 100 10 10 1 0.1 1 0.1 1 10 100 Frequency f [MHz] Z(comm) 1 10 100 Frequency f [MHz] 0.1 1 10 100 Frequency f [MHz] Z(comm) Z(diff) Z(comm) Z(diff) Accetek Electronics (Shenzhen) Co., Ltd. 1 www.accetek.com Z(diff) Tips-2015A 71 2CA Series Common Mode Line Filter Accetek 2CA125-102MF 2CA129-100MF 2CA129-101MF 100000 100000 100000 10000 10000 1000 100 Impedance Z [Ohm] Impedance Z [Ohm] Impedance Z [Ohm] 10000 1000 100 10 1000 100 10 10 1 1 1 0.1 1 10 0.1 100 1 Frequency f [MHz] Z(comm) 10 0.1 100 Z(comm) Z(diff) 1 10 100 Frequency f [MHz] Frequency f [MHz] Z(comm) Z(diff) Z(diff) 2CA129-102MF 100000 Impedance Z [Ohm] 10000 1000 100 10 1 0.1 1 10 100 Frequency f [MHz] Z(comm) F Z(diff) TAPE AND REEL SPECIFICATIONS D P0 P B A C P1 H W T E Case Size Parts per Reel Reel Dimensions(REF) Tape Dimensions(REF) A B C D E W P P0 P1 H T 2CA74 1000 330 100 13 22.5 16.5 16 12 4 2 4.7 0.4 2CA125 500 330 100 13 30 24.5 24 16 4 2 6.2 0.45 2CA129 350 330 100 13 30 24.5 24 16 4 2 10.2 0.45 Accetek Electronics (Shenzhen) Co., Ltd. 72 www.accetek.com Catalog-Common Mode Filter-2015A 2CB Series Common Mode Choke for High-Speed Line Accetek A FEATURES Small dimensions Prevention of common mode noise at high frequency Operating Temperature range from -40°C to +125°C (Including Self-heating) Excellent solderability B PART NUMBER SYSTEM 2CB 2012 ❶ ❷ - 900 F ❸ ❹ ❶ Series 2CB Series Code ❸ Z Code e.g. Calculation 2012 (2.0×1.2×1.2) 3216 (3.2×1.6×1.8) RoHS Compliant ❹ 0 900 90×10 Ω = 90Ω 121 12×101Ω= 120Ω C Dimension Code (L*W*H) (mm) ❷ DRAWINGS AND DIMENSIONS Drawings 4 B A 3 Schematic L C E 1 I D 2 1 4 2 3 H J Land Pattern Case Size Dimensions (mm) A B C Dref. Eref. Href. Iref. Jref. Lref. 2CB2012 2.0±0.2 1.2±0.2 1.2±0.2 0.5 0.45 0.4 0.4 0.9 2.6 2CB3216 3.2±0.2 1.6±0.2 1.8±0.2 0.7 0.6 0.4 0.6 1.1 3.7 Accetek Electronics (Shenzhen) Co., Ltd. www.accetek.com Tips-2015A 73 2CB Series Common Mode Choke for High-Speed Line Accetek D SPECIFICATIONS Z DCR1 Ir2 UDC UT Part Number (Ω) Tolerance Max.(Ω) (mA) V V(AC) 2CB2012-670F 67 ± 25 % 0.25 400 50 125 Others 2CB2012-900F 90 ± 25 % 0.30 370 50 125 USB2.0 Typ. Applications 2CB2012-121F 120 ± 25 % 0.30 370 50 125 IEEE1394/Firewire 400 Mbps 2CB2012-181F 180 ± 25 % 0.35 330 50 125 IEEE1394/Firewire 400 Mbps 2CB2012-261F 260 ± 25 % 0.40 300 50 125 Others 2CB2012-371F 370 ± 25 % 0.45 280 50 125 IEEE1394/Firewire 400 Mbps 2CB3216-900F 2CB3216-161F 90 160 ± 25 % ± 25 % 0.30 0.40 370 340 50 50 125 125 USB2.0 IEEE1394/Firewire 400 Mbps 2CB3216-261F 260 ± 25 % 0.50 310 50 125 Others 2CB3216-601F 600 ± 25 % 0.80 260 50 125 Others 2CB3216-102F 1000 ± 25 % 1.00 230 50 125 Others 2CB3216-222F 2200 ± 25 % 1.20 200 50 125 Others 1. DCR measured @ 25°C. 2. Ir: DC current for an approximate 40°C rise from 20°C ambient temperature. 3. Specifications subject to change without notice please check our website for latest information. E TYPICAL IMPEDANCE CURVES 2CB2012-670F 2CB2012-900F 1000 100 10 1000 Impedance Z [Ohm] Impedance Z [Ohm] Impedance Z [Ohm] 1000 100 10 1 10 100 1000 Z(comm) 10 100 1000 1 Z(diff) Z(comm) Z(diff) Z(comm) 100 10 1 10 100 10 1 1 10 Frequency f [MHz] Z(comm) 100 1 1000 100 1 1000 Z(diff) Z(comm) Z(comm) Z(diff) 2CB3216-161F 1000 1000 Impedance Z [Ohm] 1000 Impedance Z [Ohm] 10000 100 10 10 10 100 1000 Z(comm) Z(diff) Accetek Electronics (Shenzhen) Co., Ltd. 100 1 1 10 100 1000 Frequency f [MHz] Frequency f [MHz] Z(diff) 10 1 1 1000 2CB3216-261F 10000 100 100 Frequency f [MHz] 10000 1 10 Frequency f [MHz] 2CB3216-900F Z(diff) 1000 Impedance Z [Ohm] Impedance Z [Ohm] 10 1000 2CB2012-371F 1000 100 100 Frequency f [MHz] 2CB2012-261F 1000 1 10 Frequency f [MHz] 2CB2012-181F Impedance Z [Ohm] 10 1 1 Frequency f [MHz] Impedance Z [Ohm] 100 1 1 74 2CB2012-121F Z(comm) 1 10 100 1000 Frequency f [MHz] Z(diff) www.accetek.com Z(comm) Z(diff) Catalog-Common Mode Filter-2015A 2CB Series Common Mode Choke for High-Speed Line Accetek 2CB3216-102F 1000 1000 1000 100 Impedance Z [Ohm] 10000 10 100 10 1 10 100 1000 1 10 Frequency f [MHz] Z(comm) 100 10 1 1 F 2CB3216-222F 10000 Impedance Z [Ohm] Impedance Z [Ohm] 2CB3216-601F 10000 100 1 1000 1 Frequency f [MHz] Z(diff) Z(comm) 10 100 1000 Frequency f [MHz] Z(diff) Z(comm) Z(diff) TAPE AND REEL SPECIFICATIONS D P0 P B A C P1 W T E Case Size Parts per Reel Reel Dimensions(REF) Tape Dimensions(REF) A B C D E W P P0 P1 H T 2CB2012 2000 178 58 13 13 9.0 8 4 4 2 1.3 0.25 2CB3216 2000 178 58 13 13 9.0 8 4 4 2 2.1 0.25 Accetek Electronics (Shenzhen) Co., Ltd. H www.accetek.com Tips-2015A 75 2CC Series Common Mode Choke for Ultra-Speed Line Accetek A FEATURES Small dimensions Prevention of common mode noise at ultra-high frequency Operating Temperature range from -40°C to +125°C (Including Self-heating) Excellent solderability B PART NUMBER SYSTEM 2CC 2012 ❶ ❷ - 900 F ❸ ❹ ❶ Series 2CC Series Code ❸ Z Code e.g. Calculation 2012 (2.0×1.2×1.2) RoHS Compliant ❹ 0 900 90×10 Ω = 90Ω 121 12×101Ω= 120Ω C Dimension Code (L*W*H) (mm) ❷ DRAWINGS AND DIMENSIONS Drawings 4 B A 3 Schematic L C E 1 I D 2 1 4 2 3 H J Land Pattern Case Size 2CC2012 Dimensions (mm) A B C Dref. Eref. Href. Iref. Jref. Lref. 2.0±0.2 1.2±0.2 1.2±0.2 0.5 0.45 0.4 0.4 0.9 2.6 Accetek Electronics (Shenzhen) Co., Ltd. 76 www.accetek.com Catalog-Common Mode Filter-2015A 2CC Series Common Mode Choke for Ultra-Speed Line Accetek D SPECIFICATIONS Z DCR1 Ir2 UDC UT Part Number (Ω) Tolerance Max.(Ω) (mA) V V(AC) Typ. Applications 2CC2012-670F 67 ± 25 % 0.24 320 50 125 USB3.0 2CC2012-900F 90 ± 25 % 0.30 280 50 125 HDMI 2CC2012-121F 120 ± 25 % 0.30 280 50 125 LVDS/USB2.0 1. DCR measured @ 25°C. 2. Ir: DC current for an approximate 40°C rise from 20°C ambient temperature. 3. Specifications subject to change without notice please check our website for latest information. E TYPICAL IMPEDANCE CURVES 2CC2012-670F 2CC2012-900F 1000 100 10 1 1000 Impedance Z [Ohm] Impedance Z [Ohm] Impedance Z [Ohm] 1000 100 10 1 1 10 100 1000 Z(comm) 100 10 1 1 10 Frequency f [MHz] F 2CC2012-121F 100 1000 1 Frequency f [MHz] Z(diff) Z(comm) 10 100 1000 Frequency f [MHz] Z(diff) Z(comm) Z(diff) TAPE AND REEL SPECIFICATIONS D P0 P B A C P1 W T E Case Size 2CC2012 Parts per Reel 2000 Reel Dimensions(REF) Tape Dimensions(REF) A B C D E W P P0 P1 H T 178 58 13 13 9.0 8 4 4 2 1.3 0.25 Accetek Electronics (Shenzhen) Co., Ltd. H www.accetek.com Tips-2015A 77 Accetek Recommended Soldering Profile RECOMMENDED SOLDERING PROFILE (For SMD Type) Profile Feature Recommended Conditions Average ramp-up rate 3°C/second max. (Tsmax to Tp) Preheat Temperature Min (Tsmin) 100°C Temperature Max (Tsmax) 150°C Time (Tsmin to Tsmax)(ts) 60-180 seconds Time maintained above: Temperature (TL) 217°C Time (tL) 60-150 seconds Peak Temperature (Tp) See Table2 Time within 5°C of actual Peak 20-40 seconds Temperature (tp)2 Ramp-down Rate 6°C/second max. Time 25°C to Peak Temperature 8 minutes max Table 1 Package Volume mm3 Volume mm3 Volume mm3 Thickness <350 350 - 2000 >2000 < 1.6mm 1.6mm - 2.5mm >2.5mm ° ° 260 C 260 C ° 260 C 250 C 260 C ° 245 C ° 245°C 250 C ° ° 245 C 1. The above profiles are based on IPC/JEDEC J-STD-020C. 2. Exceeding these conditions may cause lowered product reliability. ° Table 2 RECOMMENDED SOLDERING PROFILE (For Through Hole Type) Accetek Electronics (Shenzhen) Co., Ltd. 78 www.accetek.com Catalog-Soldering Profile-2015A Accetek Tips TIPS 1 Use Power Inductor Selector to find out the right inductor in need: Web link: http://accetek.com/power-inductor-selector TIPS 2 Use Free Samples Webform to apply free samples in need: Web Link: http://accetek.com/webform/fast-free-samples Accetek Electronics (Shenzhen) Co., Ltd. www.accetek.com Tips-2015A 79 Accetek Accetek Electronics (Shenzhen) Co., Ltd. 80 MEMO www.accetek.com MEMO-2015A Accetek Electronics (Shenzhen) Co., Ltd. 4/F, BLDG6, Huilongpu Technology Park, Tongle , Longgang District, Shenzhen, China Tel: +86 755 89455252 Fax: +86 755 28188070 Website: www.accetek.com Email: [email protected] 81