Datasheet - Diodes Incorporated

UF5A400D1
Green
5A ULTRA-FAST RECTIFIER
Features
Mechanical Data
•
Ultra-Fast Die Construction
•
Soft, Fast Switching Capability
•
•
•
Low Leakage Current
•
Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
•
Halogen and Antimony Free. “Green” Device (Note 3)
•
•
NEW PRODUCT
•
Case: TO252
Case Material: Molded Plastic, “Green” Molding Compound.
UL Flammability Classification Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020
Terminals: Finish – Matte Tin Annealed Over Copper Leadframe
Solderable per MIL-STD-202, Method 208
Polarity: See Diagram
C
LEFT PIN
RIGHT PIN
A
Top View
A
BOTTOMSIDE
HEAT SINK
Note: Pins Left & Right must
be electrically connected
at the printed circuit board.
Top View
Pin-Out
Ordering Information (Note 4)
Part Number
UF5A400D1-13
Notes:
Case
TO252
Packaging
2500 pieces/reel
1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. For packaging details, go to our website at http://www.diodes.com/products/packages.html.
Marking Information
YYWW
UF5A400
UF5A400D1
Document number: DS32142 Rev. 4 - 2
UF5A400 = Product Type Marking Code
= Manufacturers’ Code Marking
YYWW = Date code marking
YY = Last two digits of year (ex: 14 for 2014)
WW = Week code (01 to 53)
1 of 5
www.diodes.com
April 2014
© Diodes Incorporated
UF5A400D1
Maximum Ratings (@TA = +25°C, unless otherwise specified.)
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
400
V
Average Rectified Output Current
IO
5
A
IFSM
100
A
Symbol
Value
Unit
Typical Thermal Resistance Junction to Case
RθJC
2.0
°C/W
Typical Thermal Resistance Junction to Ambient (Note 5)
RθJA
34
°C/W
TJ, TSTG
-65 to +175
°C
Non-Repetitive Peak Forward Surge Current
8.3ms Single Half Sine-Wave Superimposed on Rated Load
Thermal Characteristics
Characteristic
Operating and Storage Temperature Range
Electrical Characteristics (@TA = +25°C, unless otherwise specified.)
Characteristic
Symbol
Min
Typ
Max
Forward Voltage
VF
⎯
⎯
0.95
0.84
1.4
1.0
V
Reverse Leakage Current (Note 6)
IR
⎯
⎯
⎯
⎯
10
0.2
µA
mA
Unit
Test Condition
IF = 5A, TJ = +25°C
IF = 5A, TJ = +125°C
VR = 400V, TJ = +25°C
VR = 400V, TJ = +125°C
Reverse Recovery Time
trr
⎯
28
35
ns
IF = 0.5A, IR = 1.0A, Irr = 0.25A
Junction Capacitance
CJ
⎯
40
50
pf
VR = 10VDC, f = 1MHz
Notes:
5. Device mounted on Polymide PCB, with 16X recommended pad layout.
6. Short duration pulse test used to minimize self-heating effect.
IF , INSTANTANEOUS FORWARD CURRENT (A)
4.0
3.5
PD, POWER DISSIPATION (W)
NEW PRODUCT
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic
3.0
2.5
2.0
1.5
1.0
0.5
0
0
1
2
3
4
5
6
IF(AV), AVERAGE FORWARD CURRENT (A)
Figure 1 Forward Power Dissipation
UF5A400D1
Document number: DS32142 Rev. 4 - 2
10
1
TA = 150°C
TA = 125°C
0.1
TA = 85°C
0.01
TA = 25°C
0.001
TA = -55°C
0.0001
0.00001
0
2 of 5
www.diodes.com
0.2
0.4
0.6
0.8
1
1.2
VF, INSTANTANEOUS FORWARD VOLTAGE (V)
Figure 2 Typical Forward Characteristics
April 2014
© Diodes Incorporated
TA = 150°C
CT, TOTAL CAPACITANCE (pF)
f = 1MHz
100
TA = 125°C
10
T A = 85°C
1
TA = 25°C
0.1
0.01
0
IF(AV), AVERAGE FORWARD CURRENT (A)
6
RθJA = RθJC
5
Note 5
4
3
2
1
0
25
50
75
100 125
150
TL, LEAD TEMPERATURE (° C)
Figure 5 Forward Current Derating Curve
1
10
VR, DC REVERSE VOLTAGE (V)
100
Figure 4 Total Capacitance vs. Reverse Voltage
175
Based on Lead Temperature (TL)
0
100
10
0.1
50 100 150 200 250 300 350 400
VR, INSTANTANEOUS REVERSE VOLTAGE (V)
Figure 3 Typical Reverse Characteristics
TA, DERATED AMBIENT TEMPERATURE (°C)
IR, INSTANTANEOUS REVERSE CURRENT (µA)
1000
1000
175
150
125
100
75
50
25
0
0
80
160
240
320
VR, DC REVERSE VOLTAGE (V)
400
Figure 6 Operating Temperature Derating
9.0
PF(AV), AVERAGE FORWARD POWER
DISSIPATION (W)
NEW PRODUCT
UF5A400D1
8.0
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
0
2
4
6
8
IF(AV), AVERAGE FORWARD CURRENT (A)
Figure 7 Forward Power Dissipation
UF5A400D1
Document number: DS32142 Rev. 4 - 2
10
3 of 5
www.diodes.com
April 2014
© Diodes Incorporated
UF5A400D1
Package Outline Dimensions
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
E
TO252
Dim Min Max Typ
A 2.19 2.39 2.29
A1 0.00 0.13 0.08
A2 0.97 1.17 1.07
b
0.64 0.88 0.783
b2 0.76 1.14 0.95
b3 5.21 5.46 5.33
c2 0.45 0.58 0.531
D 6.00 6.20 6.10
D1 5.21
−
−
e
2.286
−
−
E 6.45 6.70 6.58
E1 4.32
−
−
H 9.40 10.41 9.91
L
1.40 1.78 1.59
L3 0.88 1.27 1.08
L4 0.64 1.02 0.83
a
0°
10°
−
All Dimensions in mm
A
b3
c2
NEW PRODUCT
L3
A2
D
E1
H
L4
A1
L
e
2X b2
3X b
a
Suggested Pad Layout
Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version.
X2
Dimensions
Z
X1
X2
Y1
Y2
C
E1
Y2
C
Z
Y1
X1
UF5A400D1
Document number: DS32142 Rev. 4 - 2
Value (in mm)
11.6
1.5
7.0
2.5
7.0
6.9
2.3
E1
4 of 5
www.diodes.com
April 2014
© Diodes Incorporated
UF5A400D1
IMPORTANT NOTICE
NEW PRODUCT
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2014, Diodes Incorporated
www.diodes.com
UF5A400D1
Document number: DS32142 Rev. 4 - 2
5 of 5
www.diodes.com
April 2014
© Diodes Incorporated