Specialty Fiber Fusion Splicers Patented “Split V-groove” clamping system “Plasma Zone” fiber positioning Short cleave length capability Special arc calibration Dual splice loss estimation Enhanced sweep arc Internet firmware update & interface Production environment friendly design Zero degree fiber holder position Fiber profile learning function Dual PM alignment method FSM-100P Only Specialty Fiber Fusion Splicer FSM-100M Polarization Maintaining Fiber Fusion Splicer FSM-100P PM fiber splicing capability product line Fujikura s new splicers are engineered with a robust set of features that offer customers technology and reliability not available elsewhere. The need for Accurate, Reliable, and Consistent splicing is expanding to new applications beyond telecommunications. These entirely new fusion splicers from Fujikura have been developed to provide the ultimate in performance and flexibility for a variety of customers and markets. Additional information can be found at www.StateoftheARC.com website which is the central repository of information for all of Fujikura s state of the art fusion splicer products. Stay tuned to www.StateoftheARC.com for forthcoming additions to the family of specialty fusion splicers where incremental capabilities will be revealed. Specialty Fiber Fusion Splicer Polarization Maintaining Fiber Fusion Splicer FSM-100M FSM-100P Fujikura’s new specialty splicers FSM-100M and FSM-100P offer a host of innovative technology to address the rapidly expanding splicing needs for factory, manufacturing, laboratory and R&D applications. These models are introduced as “ ” splicers due to their unique capabilities to control the plasma zone of the fusion arc. These capabilities will revolutionize the way users will splice various types of specialty fibers; LDF, low contrast PM, holey structured, etc. Patented “Split V-groove” clamping system The FSM-100 series has the revolutionary design clamp system. - No need to change V-groove or clamp part - Programmable for any fiber or coating size - Reliably captures fiber for good alignment a 60 µm b Clamp Split v-groove A c Split v-groove B 500 µm Applicable fiber: Glass clamp: cladding dia. 60 to 500 µm Coating clamp: coating dia. 100 to 2000 µm “Plasma Zone” fiber positioning The FSM-100 series has two electrode positioning techniques in order to provide unprecedented versatility for each specialty fiber. Electrode Gap 1 mm 1 mm 3 mm Electrode gap: 1 mm Electrode gap: 3 mm 3 mm Electrode Electrode V Height Shift Electrode Electrode 0 µm 100 µm 300 µm Optimum plasma Zone 60 µm 125 µm 500 µm offset 1 mm 1 mm 3 mm Short cleave length capability Fiber Coating 3mm For minimizing the length of stripped fiber at splice point, FSM-100 series can splice a short cleave length fiber. Fiber Holder Split v-groove Electrode Holder Base Special arc calibration Dual splice loss estimation This calibration technology facilitates an easy transfer of high end splicing applications from R&D to production by ensuring consistent performance and takes full advantage of Plasma Zone capabilities. Combining the best features of both cold and warm splice imaging, FSM-100 series offer unprecedented accuracy for splice loss estimation. New Specialty fibers especially for LDF Melt-back arc calibration 125um Telecom fibers Conventional arc calibration 125um Telecom fibers Real time auto arc calibration Image of PAS Image of WSI Enhanced sweep arc Increased travel range for sweep arc provides improved MFD matching capability and the ability for reshaping non-circular fibers in preparation for splicing. a) b) c) d) e) Sweep length Max.5 mm Splice Point Internet firmware update & interface Production enviroment friendly design An industry first! Customers can now upgrade firmware as new capabilities become available from Fujikura. Upgrading is as simple as connecting a USB cable to your splicer. A low profile design that eliminates fiber catch points, the dimensions of both splicers are consistent with the most popular production splicing work-benches in use today. Internet FSM-100 USB 2.0 Firmware Firmware, command & data Video image & data PC GP-IB Power Meter, etc. Local Area Network Zero degree fiber holder position – For splicing LDF fibers with minimal core angle, the fiber holders are horizontally positioned relative to the v-grooves. Fiber profile learning function The splicer learns the fiber profile with the best focusing position in order to observe the core position accurately. After learning, the focusing time during a splice will be short. Dual PM alignment（FSM-100P Only） PANDA Fiber N : 30 Ave.: 44 dB 10 Frequency To properly align and splice the ever increasing and technically challenging variety of PM fibers, Fujikura developed IPA which is a new alignment technology. The FSM-100P includes both traditional PAS alignment as well as the new IPA technology, and it provides users with the most comprehensive capabilities on the market for splicing PM fiber. IPA also enables accurate PER estimation for all PM fiber types. 12 8 6 4 2 0 50 PANDA Ellipic-core BOWTIE 48 46 44 42 40 38 36 Polarization Crosstalk dB 34 32 30 SPECIFICATION SPECIFICATION Description Applicable type of fibers For Telecommunication Large Diameter Fiber PM fiber Clad diameter Coating diameter FSM-100M FSM-100P SMF(ITU-T G652), NZDSF(ITU-T G655), MMF(ITU-T G651), EDF, DCF and other specialty fibers. Conventional sillica LDF PMF φ 60 to 500 µm φ 100 to 2000 µm Fiber count Single Glass clamp: 8 to 10 mm (standard 9 mm) Coatimg clamp: 3 to 5 mm (standard 4 mm) 0.03 dB 0.05 dB 0.02 dB 0.06 dB 15 sec 25 sec 35 to 50 sec 90 to 300 sec -40 dB / 0.6 degree Cleave length Typically splice loss Splice time Typically Polarization crosstalk Return loss Tube heat time SMF NZDSF/LDF MMF PMF SMF/MMF NZDSF/LDF PMF PANDA PM AUTO PMF PANDA PM AUTO -32 dB / 1.4 degree FP-03 40 mm FP-03 60 mm FPS01 series (micro sleeve) Fiber clamp Sweep range Electrode life Electrode gap Electrode offset >> 60 dB 30 sec 35 sec 55 sec *Heat time change with depended on tyep of micro sleeve It chages according to cladding diameter and coating diameter automatically. ± 5 mm (the arc center is 0mm.) 2500 arc discharges. (at the SMF (ITU-T G.652) splicing with 1mm electrode gap) 1.0 to 3.0 mm (adjustable) -0.3 to +0.1 mm (adjustable) Splicer Main Body Carrying Case Fiber Holder for 250um Fiber Holder for 400um AC Adapter AC Power Cord for AC adapter Spare Electrodes USB Cable Dust Cleaning Stick Warnings and Cautions Splicing Report Instruction Manual PC control Display Dimensions Weight Power supply Operating condition Storage condition Terminals FSM-100M FSM-100P 1.96 to 2.45 N 58 to 300 (changeable) Available Total 300 modes Available Available Available Available 100 heating mode installed The last 2000 results to be stored in the internal memory. English / Japanese / Chinese 3 methods installed 2 methods installed Available Capable via internet. Capable Capable Capable Capable Sample software and command list is available. Dual 4.1" inches color LCD monitor. 311（ W ）× 232（D）× 160（H）mm excluding rubber foot 7.5 kg 7.9 kg external AC adapter: ADC-15 Input : AC100 to 240 V（50 to 60Hz）(max.100 W AC) 0 to 95%RH and 0 to 40 degC respecitively 0 to 95%RH and -40 to 80 degC respectively Power supply: DC19 V 4.5 A USB2.0（Mini-B type）for PC communication IEEE-488 24 pin for power monitor feedback alignment Two 6-pin Mini-DIN connector for external equipment ( HJS-02) Standard Package Standard Package Name Description Proof test Magnification Auto start function Number of splice mode Standard Mode Spliceing mode Manual mode Power meter mode Attenuation mode Number of tube heating mode Strage of splicing result Lahguage Arc power calibration Arc positon calibration Fiber learning function Software upgrade Display image data Splice conditions PC communication Splice results FSM-100M Qty. 1pc 1pc 1pair 1pc Model FSM-100M FSM-100P CC-27 FH-100-250 FH-100-400 ADC-15 FSM-100P Qty. 1pc 1pc 1pair 1pair 1pc ACC-** 1pc 1pc ELCT2-25 USB-01 DCS-01 W-100MP-E M-100MP-E 1pair 1pc 1pc 1pc 1pc 1pc 1pair 1pc 1pc 1pc 1pc 1pc ACC-** ADC-15 USB-01 FH-100-250 M-100MP-E FSM-100M/P FH-100-400 (FSM-100P only) OPTIONAL ITEMS Item Description FH-100-*** Fiber Holder Cleaver Angle Cleaver Jacket Stripper Hot Jacket Stripper Ultrasonic Cleaner Recoter & Proof tester Sleeve Micro sleeve FH-100-**** FH-40-LT900 CT-32 CT-38 CT-10 CT-30 CT-11 JS-02-900 JS-01 HJS-02 USC-02 FSR-02 FP-03 FP-04S FPS01-400-** FPS01-900-** Note *** : Coating diameter FH-100-060, FH-100-100, FH-100-125, FH-100-150, FH-100-180,FH-100-210,FH-100-250, FH-100-300, FH-100-350, FH-100-400, FH-100-500, FH-100-600, FH-100-700, FH-100-800, FH-100-900 Coating Dia. : 1000 to 2000 µm Coating Dia. : 900 µm for loose tube Cladding Dia. : 125 µm, Cleave length: 4 mm / 9 mm Cladding Dia. : 80 µm, Cleave length: 4 mm / 9 mm Cladding Dia. : 125 µm, Cleave length: 5 mm /10 mm Cladding Dia. : 125 µm, Cleave length: 5 mm /10 mm Cladding Dia. : 125 µm Coating Dia. : 900 µm (applicable for fiber holder 900 µm) Coating Dia. : 900 µm Coating Dia. : 250 to 400 µm 60 mm 40 mm 12,15,20,25,34,45 mm / coating dia. 400 µm 15,20,25,34,45 mm / coating dia. 900 µm Specifications and descriptions are subject to change without prior notice. Fujikura Ltd. 1-5-1, Kiba, Koto-ku, Tokyo 135-8512, Japan Phone : +81-3-5606-1164 Fax : +81-3-5606-1534 Fujikura Asia Ltd. 460, Alexandra Road, #22-02 PSA Bldg., Singapore 119963 Phone : +65-6-271-1312 Fax : +65-6-278-0965 http://www.fujikura.co.sg Fujikura Europe Ltd. C51 Barwell Buisiness Park, Leatherhead Road, Chessington, Surrey KT9 2NY, UK Phone : +44-20+8240-2000 Fax : +44-20-8240-2010 http://www.fujikura.co.uk AFL Telecommunications 260, Parkway East, Duncan, SC29334, USA Phone : +1-800-235-3423 Fax : +1-800-926-0007 Fujikura (Shanghai) Trading Co., Ltd. 16th Floor, HSBC Tower,1000 Lujiazui Ring Road, Pudong, Shanghai 200120, China. Phone : +86-21-6841-3636 Fax : +86-21-6841-2070 http://www.fujikura.com.cn 913-10-0690-139・95-00 http://www.fujikura.co.jp http://www.afltele.com Printed in Japan 1008-1008-2000-DNP