No.: B-12M0040 Date of issue: Dec. 20, 2012 AC Adapter / Battery Charger / DC Inlet ADC-11 DATA SHEET The ADC-11 supplies required DC power exclusively for Fujikura’s Fusion Splicers. Three functions are available on it, as AC adapter, battery charger and external DC power inlet. The ADC-11 is supplied with Fusion Splicers, FSM-50 series or FSM-17 series, as a standard item. ADC-11 SPECIFICATION Kind of power inlet AC power supply AC, External DC and battery charging Input 100V to 240V AC, 50Hz to 60Hz Power cord Fujikura's AC power cords; ACC-01~07 External DC power supply Input Battery charging Battery / Capacity 10V to 15V DC Fujikura's DC power cords; DCC-12 (Cigarette lighter plug), DCC-13 (Alligator clamps) Fujikura's battery pack; BTR-06(S) / 4.5Ah, BTR-06(L) / 9.0Ah Charging voltage 13.2V Power cord Battery charge cord Power supply selection Fujikura's battery charge cord; DCC-10 Dimensions Automatic Available (High input indicator equipped) Worked at 350V AC (or Peak 490V) or 16V DC FSM-50S, FSM-50R, FSM-17S, FSM-17S-FH, FSM-17R Power supply: Sloted into the above splicers Battery charging: Connecting to the battery as shown the photo below 150W x 130D x 39H (mm) Weight 0.5kg High voltage protection circuit Use for Usage POWER CORDS Model ACC-01 ACC-02 ACC-03 ACC-04 ACC-05 BTR-06(S) Type of plug ADC-11 Japan Model Type of plug ACC-06 USA ACC-07 DCC-12 DCC-13 DCC-10 Battery charging Specifications and descriptions are subject to change without prior notice.