No.: B-12M0041 Date of issue: Dec. 20, 2012 AC Adapter / Battery Charger / DC Inlet ADC-13 DATA SHEET The ADC-13 supplies required DC power exclusively for Fujikura Fusion Splicers. Three functions are available on it, as AC adapter, battery charger and external DC power inlet. The ADC-13 is supplied with Fusion Splicers, FSM-60S, FSM-60R, FSM-18S, and FSM-18R, as a standard item. ADC-13 SPECIFICATION Kind of power inlet AC power supply Battery charging External DC power supply Input Power cord Battery / Capacity Charging voltage Battery charge cord Input Power cord Power supply selection High voltage protection circuit Use for Usage Dimensions and Weight AC, External DC and battery charging 100V to 240V AC, 50Hz to 60Hz Fujikura's AC power cords: ACC-13 ～ 17 Fujikura's battery pack: BTR-08 / 4.0Ah 13.2V Fujikura's battery charge cord: DCC-14 10V to 15V DC Fujikura's DC power cords: DCC-12 (Cigarette lighter plug), DCC-13 (Alligator clamps) Automatic Available (High input indicator equipped) FSM-60S, FSM-60R, FSM-18S, FSM-18R Power supply: Sloted into the above splicers Battery charging: Connecting to the battery as shown the photo below 120W x 117D x 38H (mm), 0.34kg BTR-08 POWER CORDS AC/DC Model 【AC】 ACC-14 ACC-15 【DC】 DCC-12 ACC-17 DCC-13 Type of plug DCC-14 Model Japan USA ACC-16 Type of plug ADC-13 Battery charging Specifications and descriptions are subject to change without prior notice.