XFHM Data sheet Pre-amplified／5V Excitation／Gauge ■Features On-chip amplification and temperature compensations Pre-calibration of offset voltage and span Horizonral pressure port ■Ordering Information ＸＦＨＭ－０２５ＫＰ Ｇ Ｒ Terminal leadsdirection Model Ｒ Rated Pressure KP：kPa MP：MPa ： Pressure type G：Gauge(Positive pressure) GV：Gauge Pressure(Negative pressure) GW：Gauge Pressure(Positive/Negative pressure) Weight (grams) RoHS compliance 0.6 Measurable pressure range(kPa) -100 to 100 0 to -100 0 to 25 0 to 50 0 to 100 0 to 200 0 to 1000 Part number XFHM-100KPGWR XFHM-100KPGVR XFHM-025KPGR XFHM-050KPGR XFHM-100KPGR XFHM-200KPGR XFHM-001MPGR ■Specifications 100KPGW Model Recommended operating conditions Pressure type Rated pressure Measurable pressure range Temperature range Pressure media Supply voltage(constant) +/-100 -100 to100 100KPGV -100 0 to -100 025KPG 050KPG 100KPG 200KPG Gauge pressure 50 100 200 0 to 50 0 to 100 0 to 200 0 to 85 Non-corrosive gases only (No liquid) 5+/-0.25 25 0 to 25 Absolute maximum rating Maximum load pressure Twice of rated pressure 8 -40 to 125 -40 to 125 30 to 80 (Non dew condition) Electrical characteristics (Excitation voltage Vcc=5.0V constant ,ambient temperature Ta=25deg.C) Power consumption 10mA max. Output impedance 10Ω max. Source current 0.2mA max. Sink current 2mA max. Response time 2 (for the reference) Output span voltage 4.5 Offset voltage *1 *2 *3 0.2+/-0.1125 (at 0 kPa ) Output voltage at full scale *1 *4 *5 4.7+/-0.1125 (at rated pressure) Accuracy *1 +/-2.5 Maximum excitation voltage Operating temperature Storage temperature Operating humidity *1 Excluding input voltage error. *2 0.2+/-0.1125V(at -100kPa ) *4 4.7+/-0.1125V(at +100kPa) 0-85deg.C *3 0.2+/-0.1125V(at 0kPa) *5 4.7+/-0.1125V(at -100kPa) 1 001MPG 1000 0 to 1000 1.5 times of rating pressure Unit kPa kPa deg.C VDC VDC deg.C deg.C %RH mA Ω mA mA msec. V V V %FS/0-85deg.C XFHM Data sheet Pre-amplified／5V Excitation／Gauge ■Outline dimensions■ ■Connection diagram■ View from Lavel Marking 2 XFHM Data sheet Pre-amplified／5V Excitation／Gauge ■Transfer Function■ Vout = Vs×( P×α+β) ± (Pressure Error×Temperature Error Multiplier×α×Vs) Vs=Vcc=5.0V P=Input pressure(kPa) Model XFHM-100KPGWR XFHM-100KPGVR XFHM-025KPGR XFHM-050KPGR XFHM-100KPGR XFHM-200KPGR XFHM-001MPGR Measurable pressure range(kPa) -100 to 100 0 to -100 0 to 25 0 to 50 0 to 100 0 to 200 0 to 1000 Temperature Error Multiplier 3 α β Pressure Error (kPa) 0.0045 -0.009 0.036 0.018 0.009 0.0045 0.0009 0.49 0.04 0.04 0.04 0.04 0.04 0.04 5 2.5 0.625 1.25 2.5 5 25 XFHM Data sheet Pre-amplified／5V Excitation／Gauge ■Output characteristics■ XFHM-100KPGWR XFHM-100KPGVR XFHM-025KPGR XFHM-050KPGR XFHM-100KPGR XFHM-200KPGR ↑Output voltage（mV） Output voltage at full scale 4.7V Output span voltage Offset voltage 0.2V Rated pressure 0kPa Atomospheric pressure XFHM-100KPGWR →Pressure（kPa） ↑Output voltage（mV） Output voltage at full scale 4.7V Output span voltage Offset voltage 0.2V -100kPa 0kPa Atomospheric pressure Note ; +100kPa →Pressure（kPa） Please read instruction “Notes” before using the sensor. Fujikura reserves the right to change specifications without notice. Please keep the sensors sealed using static shielding bags on storage.The pins of the sensor are plated by Ag. If the sensors expose to an atmosphere, the pins will be black by sulfuration. Please set Zero-calibration function up your products. The offset voltage may be shifted some mechanical stress such as mounting, installation and etc. over longtime using. If you have any questions regarding technical issues or specifications, please contact us. Fujikura Ltd. Sensor Department 5-1 Kiba 1-chome, Koto-ku, Tokyo 135-8512, Japan Phone +81-(0)3-5606-1072 E-mail : [email protected] 4