FUJITSU SEMICONDUCTOR FACT SHEET NP411-00001-2v0-E FRAM embedded RFID LSI MB97R803A/B, MB97R804A/B TM MB97R803A/B and MB97R804A/B are UHF band RFID LSI with FRAM embedded. This product is based on international standard ISO/IEC 18000-6 Type-C, EPC global Class 1 Generation 2(C1G2). Because of the fast writing and high read/write endurance feature of FRAM, the data carrier passive RFID with large memory is realized. In addition, outstanding radiation resistance of FRAM allows RFID to be Used for medical devices, which require Gamma-ray sterilization, without any data loss. ■ FEATURES Compliant with international standard ：ISO/IEC 18000-6 Type-C EPC global Class 1 Generation 2 (C1G2) ver.1.2.0 ：860MHz to 960MHz Compliant with all UHF bands Large FRAM memory density and fast writing performance Write lock / Read lock function by password Anti-collision feature Serial interface for embedded RF solution：SPI interface (MB97R804A/B) ■ MAIN SPECIFICATION MB97R803A RF Interface RF Frequency Communication (R/W to RFID) Communication (RFID to R/W) Read/write Sensitivity Operating temperature FRAM memory size Read/write endurance Data retention Serial interface Serial input frequency - MB97R804B Wafer 2.3 to 3.6V Package TSSOP-16P ■ PACKAGE EXAMPLE OF REFERENCE Plastic, TSSOP, 16-pins (FPT-16P-M08) May 2013 MB97R804A EPC global Class1 Gen2 UHF band 860MHz to 960MHz DSB-ASK, SSB-ASK, PR-ASK Modulation PIE：40kbps to 160kbps (0 data transmission) FM0, Miller Subcarrier (M=2,4,8) 40kbps to 640kbps -6dBm -20℃ to +85℃ 4K bytes (user memory：3,424 bytes) 1010 times 10 years（+55℃） 、30 years (<+40℃) SPI 2MHz (Max) Serial input voltage Shipping type MB97R803B 1/2 Copyright©2013 FUJITSU SEMICONDUCTOR LIMITED All rights reserved Wafer Package TSSOP-16P MB97R803A/B, MB97R804A/B ■ PIN ASSIGNMENT Pin No. Pin name 12 PWRP Antenna pin （TOP VIEW） Description 14 PWRM Antenna pin SPI 1 16 NC 9 BUSY RF interface status pin VDD 2 15 NC 1 SPI SPI mode switch pin NC 3 14 PWRM 11 XCS Chip select pin NC 4 13 NC 5 12 10 XWP Write protect pin VSS PWRP SO 6 11 XCS 8 SCK Serial clock pin SI 7 10 XWP 7 SI Serial data input pin SCK 8 9 BUSY 6 SO Serial data output pin 2 VDD Supply voltage pin 5 VSS Ground pin 3,4,13,15,16 NC No connection pins FPT-16P-M08 ■ BLOCKDIAGRAM Analog RF interface Antenna Digital control SPI interface FRAM Rectifier VDD Clock generator Power supply voltage control Modulator Demodulator Clock Anti-collision function I/O R/W Data output I/O Commands Clock Data input 2 Kbytes 4K bytes Data output Commands FRAM access VDD Data input FRAM access Converter R/W Data input Data input Data output Data output ■ EVALUATION BOARD We can provide the evaluation board equipped with FSL’s MCU, FM3 family. The board consists of MCU board and Antenna board. MCU board is equipped with MCU and some sensors. Antenna board is equipped with MB97R804B and antenna for RF communication. MCU board specification ・FM3 family MCU MB9BF506R ・3-axis accelerometer, illuminance sensor, temperature/humidity sensor ・LCD ・ICE interface Antenna board specification (manufactured by TOPPAN PRINTING) ・MB97R804B (TSSOP-16P Package) ・Antenna for UHF band NP411-00001-2v0-E May 2013 2/2 Copyright©2013 FUJITSU SEMICONDUCTOR LIMITED All rights reserved