DIOTEC ELECTRONICS CORP. Data Sheet No. GPPD-400-1B 18020 Hobart Blvd., Unit B Gardena, CA 90248 U.S.A Tel.: (310) 767-1052 Fax: (310) 767-7958 4 AMP HIGH RELIABILITY SOFT GLASS PASSIVATED SILICON DIODES MECHANICAL SPECIFICATION FEATURES SERIES GP400 - GP410 ACTUAL SIZE OF DO-27 PACKAGE PROPRIETARY JUNCTION PASSIVATION FOR SUPERIOR RELIABILITY AND PERFORMANCE DO - 27 VOID FREE VACUUM DIE SOLDERING FOR MAXIMUM MECHANICAL STRENGTH AND HEAT DISSIPATION (Solder Voids: Typical < 2%, Max. < 10% of Die Area) LL BD (Dia) EXTREMELY LOW LEAKAGE AT HIGH TEMPERATURES LOW FORWARD VOLTAGE DROP BL Color Band Denotes Cathode o 4A at TA = 75 C WITH NO THERMAL RUNAWAY MECHANICAL DATA LL Case: JEDEC DO-27 molded epoxy (U/L Flammability Rating 94V-0) Terminals: Plated axial leads LD (Dia) Soldering: Per MIL-STD 202 Method 208 guaranteed NT LIA P OM SC Polarity: Color band denotes cathode RoH Mounting Position: Any Minimum In mm BL Maximum In mm 9.28 0.365 BD 0.205 5.2 0.052 1.3 Sym 1.00 0.048 LL LD Weight: 0.02 Ounces (0.7 Grams) 25.4 1.2 MAXIMUM RATINGS & ELECTRICAL CHARACTERISTICS Ratings at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive loads, derate current by 20%. PARAMETER (TEST CONDITIONS) RATINGS SYMBOL UNITS GP400 GP401 GP402 GP404 GP406 GP408 GP410 Series Number Maximum DC Blocking Voltage VRM 50 Maximum RMS Voltage VRMS Maximum Peak Recurrent Reverse Voltage VRRM o Average Forward Rectified Current @ TA = 75 C, Lead length = 0.375 in. (9.5 mm) Peak Forward Surge Current (8.3 mSec single half sine wave superimposed on rated load) Maximum Forward Voltage at 4 Amps DC o Maximum Full Cycle Reverse Current @ TL = 75 C (Note 1) Maximum Average DC Reverse Current At Rated DC Blocking Voltage Typical Thermal Resistance, Junction to Ambient (Note 1) Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range NOTES: (1) Lead length = 0.375 in. (9.5 mm) (2) Measured at 1MHz & applied reverse voltage of 4 volts 200 35 70 50 100 1000 400 600 800 140 280 420 560 700 200 400 600 800 1000 VOLTS IO 4 IFSM 200 VFM 1 IRM(AV) 20 2 50 uA IRM RqJA 18 °C/W o @ TA = 25 C o @ TA = 100 C 100 AMPS VOLTS CJ 70 pF TJ, TSTG -65 to +175 °C 4.97fgppd400 H17 DIOTEC ELECTRONICS CORP. Data Sheet No. GPPD-400-2B 18020 Hobart Blvd., Unit B Gardena, CA 90248 U.S.A Tel.: (310) 767-1052 Fax: (310) 767-7958 4 AMP HIGH RELIABILITY SOFT GLASS PASSIVATED SILICON DIODES RATING & CHARACTERISTIC CURVES FOR SERIES GP400 - GP410 6 Peak Forward Surge Current (Amperes) Average Forward Current, Io (Amperes) RESISTIVE OR INDUCTIVE LOADS 5 4 3 2 NOTE 1 1 0 0 50 100 150 1000 Maximum Non-repetitive 100 TJ = 25 C o Maximum Repetitive 10 180 1 10 o 100 Number of Cycles at 60Hz Ambient Temperature, C FIGURE 1. FORWARD CURRENT DERATING CURVE FIGURE 2. FORWARD SURGE CURRENT 100 Instantaneous Reverse Current, I (Microamperes) Instantaneous Forward Current (Amperes) 10 10 1.0 0.1 NOTE 2 1.0 .1 0.1 .01 0 20 40 60 80 100 120 140 Percent of Rated Peak Reverse Voltage 0.01 0.4 0.8 0.6 1.0 1.2 1.4 1.6 1.8 FIGURE 4. TYPICAL REVERSE CHARACTERISTICS Instantaneous Forward Voltage (Volts) FIGURE 3. TYPICAL FORWARD CHARACTERISTICS Capacitance, pF 100 NOTES (1) Single Phase, Half Wave, 60 Hz; Lead Length = 0.375" (9.5mm) 10 0.1 (2) TJ = 25 C, Pulse Width = 300 mSec, 1.0% Duty Cycle o 0.1 1 10 100 Reverse Voltage, (Volts) FIGURE 5. TYPICAL JUNCTION CAPACITANCE H18 4.97bgpdp400