PART NAME PART No. NEMA 4X PLASTIC BOX w/EXTERNAL MTG. BRKT. 4.470 113.5 3.858 98 A .276 BOSS WITH 7 .098 HOLE X .197 DEEP 8X [2.49] [5.0] 5.868 3.937 149 100 .748 19 TYP. C 1.929 49 .354 9 TYP. A 3.328 84.5 .354 BOSS WITH 9 .177 HOLE X .197 DEEP 4X [4.50] [5.0] C 2.816 71.5 2.379 60.4 M4 THREADED BRASS INSERT FOR COVER MOUNTING 4X 4.766 121 PN-1336-CMB 1.240 31.5 .197 TYP. 5 .236 6 .177 4.5 TYP. 4.757 120.8 PN-1336-DGMB 3.150 80 5.317 135 .181 4.6 TYP. 15° TYP. SECTION A-A .335 TYP. 8.5 MOUNTING HOLES ACCEPT M4 OR #8 PAN HEAD SCREWS (NOT SUPPLIED) BODY .591 15 TYP. 1.181 30 4.724 120 2.127 54 2.362 60 .276 7 4.724 120 .177 4.5 .315 8 .177 4.5 4.173 106 .276 7 .728 18.5 .217 5.5 B 4.173 106 SECTION C-C SHOWN WITH COVER MATERIAL & FINISH: (-MB SUFFIX PART NO.) POLYCARBONATE UL94-HB, UV STABILIZED, SERVICE TEMPERATURE RANGE: -40 C TO +120 C, LIGHT GRAY BODY & COVER. (-CMB SUFFIX PART NO.) SAME AS -MB EXCEPT CLEAR COVER. (-DGMB SUFFIX PART NO.) ABS UL94-HB, SERVICE TEMPERATURE RANGE: -40 C TO +80 C, DARK GRAY BODY & COVER. NOTES: 1.) FOUR (4) M4 STAINLESS STEEL SCREWS SUPPLIED FOR ASSEMBLY OF COVER TO BODY. 2.) BOXES DESIGNED TO MEET FOLLOWING STANDARDS: NEMA 1, 2, 4, 4X, 12, 13 AND IEC529-IP66 REQUIREMENTS. 3.) ALL HOLE DIAMETERS HAVE .005[.12] TOLERANCE. ALL OTHER DIMENSIONS HAVE .015[.38] TOLERANCE. 4.) ALL OUTSIDE DRAFT ANGLE: 1 ALL INSIDE DRAFT ANGLE: 1/2 5.) DIMENSIONS ARE INCH[MM] REVISION DATE .276 7 .197 TYP. 5 .118 3 .410 10.4 2.383 60.5 1.276 32.4 4.470 113.5 PN-1336-MB .118 3 .079 2 B SILICONE SPONGE GASKET COVER SECTION B-B 2-10-14