Technical Data Glenair Series ITS and ITS-RG MIL-DTL-5015 Type Reverse Bayonet Connectors Insert Arrangements for Thermocouple Contacts Arrang. Insert Number of Contacts #16 A #12 Standard Insert Alternate Alternate Position Position Rotation Contact Material 10SL-51 2 - 10SL-4 45 A=Fe - B=Con 10SL-52 2 - 10SL-4 45 A=Cu - B=Con 10SL-53 2 - 10SL-4 45 10SL-54 3 - 10SL-3 - A=Al - B=Ch A=Fe - B=Con - C=Cu 10SL-55 3 - 10SL-3 - A=Al - B=Ch - C=Cu 10SL-56 2 - 10SL-4 - A=Al - B=Ch 12S-51 2 - 12S-3 315 A=Ch - B=Al 12S-54 2 - 12S-3 315 A=Fe - B=Con A=Cu - B=Con 12S-55 2 - 12S-3 45 12S-56 2 - 12S-3 - A=Al - B=Ch 12S-57 2 - 12S-3 60 A=Ch - B=Al 12S-58 2 - 12S-3 120 A=Fe - B=Con 12S-59 2 - 12S-3 - A=Fe - B=Con 12S-62 2 - 12S-3 - A=Ch - B=Al 14S-51 2 - 14S-9 90 A=Al - B=Ch 14S-52 4 - 14S-2 45 A,B=Cu - C=Al - D=Ch 14S-53 2 - 14S-9 90 A=Fe - B=Con 14S-54 6 - 14S-6 45 A,C,E=Fe - B,D,F=Con 14S-55 4 - 14S-2 45 A,C=Fe - B,D=Con 14S-56 4 - 14S-2 45 A=Fe - B=Con - C,D=Cu 14S-57 4 - 14S-2 45 A,C=Al - B,D=Ch 14S-58 3 - 14S-4 45 A=Al - B=Ch - C=Cu 14S-59 2 - 14S-9 90 A=Cu - B=Con 14S-60 2 - 14S-9 - 14S-61 6 - 14S-6 45 14S-63 6 - 14S-6 - A,C=Al - B,D=Ch - E=Fe - F=Con 14S-64 4 - 14S-2 - A,C=Con - B,D=Cu 14S-65 6 - 14S-6 - A,C,E=Cu - B,D,F=Con 14S-67 6 - 14S-6 - A=Al - B=Ch - Bal=Cu 14S-68 4 - 14S-2 45 14S-69 3 - 14S-7 - A=Con - B=Ch - C=Cu 14S-70 4 - 14S-2 - A=Ch - D=Al - Bal=Cu 14S-71 4 - 14S-2 - n°2 =Ch - n°2=Con 14S-72 4 - 14S-2 - A,C=Fe - B,D=Con 14S-73 4 - 14S-2 - A,C=Ch - B,D=Al 14S-74 4 - 14S-2 - A=Al - B=Ch - Bal=Cu 14S-77 6 - 14S-6 - A,B,C=Al - D,E,F=Ch 14S-78 4 - 14S-2 - A,B=Al - C,D=Ch 14S-79 5 - 14S-5 - n°1=Al - n°1=Ch - Bal=Cu 14S-80 3 - 14S-7 - n°2=Fe - n°1=Con 16S-50 5 - 16S-8 - n°1=Con - n°1=Fe - n°3=Cu 16S-51 7 - 16S-1 - A,F=Al - B=Ch - Bal=Cu 16S-52 2 - 16S-4 - A=Ch - B=Al 16S-53 3 - 16S-5 - A,B,C=Fe 16S-54 7 - 16S-1 - A=Al - B=Ch - Bal=Cu A=Al - B=Ch A=Al - B=Ch - C=Fe - D=Con - E,F=Cu A=Ch - B=Con - C,D=Cu Materials description key: Al = Alumel, Ch = Chromrel, Con = Constantan, = Copper, Fe = Iron, = Phosphor Bronze, = Wire hole plug B Legenda Materiali : Al = Alumel , Ch = Chromel ,Cu Con = Costantana , CuPhBz = Rame , Fe = Ferro , PhDummy Degrees α ±2° © 2010 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-22 Technical Data Glenair Series ITS and ITS-RG MIL-DTL-5015 Type Reverse Bayonet Connectors Insert Arrangements for Thermocouple Contacts Number of Num ber of ber of lternate Num Alternate N° Contacts of contacts Standard Alternate Arrang. Standard Alternate Contacts Position Insert Std insert Position Contacts Insert Insert Insert Insert Position Position Rotation Rotation #16 #12 #16 #12 #16 #12 16S-55 20-222 20-22223 16S-56 20-50 20-50 717 20-51 20-51 38 16S-57 20-52 20-52 516S-58 20-56 20-56 716S-59 20-60 20-60 28 16-13 20-61 20-61 217 16-52 20-62 20-62 216-53 20-64 20-64 14 16-55 20-641 20-64114 16-56 20-65 20-65 14 16-57 20-67 20-67 -7 16-58 20-68 20-68 -8 16-60 20-69 20-69 14 18-15 20-70 20-70 417 18-41 20-71 20-71 417 18-42 20-74 20-74 417 18-43 20-75 20-75 318-44 20-76 20-76 17 18-45 5 20-77 18-46 20-78 18-47 20-80 18-49 20-81 18-50 20-82 18-51 20-83 18-52 20-84 18-53 20-85 18-54 20-86 18-56 22-36 18-57 22-57 18-59 22-60 18-60 22-62 18-61 22-68 18-62 22-69 18-63 22-71 18-65 22-72 18-66 22-73 18-67 22-74 18-68 22-75 18-69 22-77 18-70 22-78 18-71 22-79 18-72 22-81 18-73 22-82 18-74 22-83 18-75 22-85 20-77 49 20-78 420-801020-81 -8 20-82 614 20-83 14 20-84 63 20-85 14 20-86 14 10 22-36 6 22-57 19 6 22-60 19 22-62 6 22-68 14 6 22-69 14 22-71 19 6 22-72 4 10 22-73 4 6 22-74 5 22-75 10 22-77 14 22-78 19 64 22-79 22-81 2 22-82 19 19 22-83 10 22-85 4 33-#8 16S-4 20-22 3 #8 20-22 -- 16S-1 20-29 17 20-29 20-7 8-- 16S-5 20-7 20-4 --4 16S-8 4 20-4 --8 8--17 2-7 314 214 14 37 32 8 214 417 -17 -- 17 ---7 17 -9---4 --3 1 8 2 14 14 5 33#8 14 4 14-8 19195 -8 14144 1942 42 -8 -8 14519 443 2 4 194 1942 20-7 16S-1 8 20-7 16-13 - 20-7 20-7 20-29 16-11 20-29 20-15 16-9 7 20-15 20-27 16-10 20-27 20-27 16-13 20-27 20-27 20-27 16-10 20-16 2 20-16 16-10 20-7 20-7 16-13 20-27 20-27 18-15 20-29 20-29 18-4 20-29 20-29 18-4 20-29 20-29 18-4 20-15 7 20-15 18-22 20-29 20-29 18-20 20-A9 18-420-4 4 18-4 20-3 3 18-1 20-21 1 18-3 20-27 18-12 20-27 18-11 20-22 3 #8 18-12 20-27 18-15 20-27 18-1 22-36 8 18-12 22-14 18-12 22-14 18-11 22-23 8 18-12 22-19 18-12 22-19 18-15 22-14 18-12 22-5 2 18-1 22-5 2 18-12 22-23 8 18-11 22-23 8 18-1 22-19 18-11 22-14 18-12 22-10 18-10 22-34 3 18-10 22-14 18-10 22-14 18-1 22-5 2 20-A9 20-4 20-3 20-21 20-27 20-27 20-22 20-27 20-27 22-36 22-14 22-14 22-23 22-19 22-19 22-14 22-5 22-5 22-23 22-23 22-19 22-14 22-10 22-34 22-14 22-14 22-5 315 45 45 45 90 80 70 45 90 ------- --- -45 45 45 45 45 45 300 45 45 --45 ---- M aterials for Contacts Contact Material Contact Material n°1=Con - n°1=Cu - D=Con Bal=Cu- Bal=Cu - B=Fe B=Fe - -D=Con A,D=Fe-n°7=Al -n°7=Ch B,E=Con - Bal=Cu - n°3=Cu - n°7=Al - n°7=Ch - n°3=Cu - B,D,F,H=Al n°1=Ch A,C,E,G=Ch - n°1=Al - n°1=Cu - A,C,E,G=Ch - B,D,F,H=Al - B=Con C=Ch --D=Al n°2=Fe - n°2=Con - n°1=Cu 315A=Fe A=Fe --B=Con C=Ch - D=Al A,B,G,H=Fe C,D,E,F=Con n°3=Al n°3=Ch n°1=Cu 45 A,B,G,H=Fe - C,D,E,F=Con E=Al A=Fe -- B=Con 45D=Ch D=Ch- Bal=Cu - E=Al - Bal=Cu - Bal=Con A=Al - B=Ch 45A,B,M=Cu A,B,M=Cu - Bal=Con A - B,D,F=Ch - G=Cu - G=Cu A=Al - C=Ch - B,D=Cu 80A,C,E=Al A,C,E=Al - B,D,F=Ch C=Ch A=Al -- B=Ch C=Cu - H=Al H=Al---Bal=Cu C=Ch - Bal=Cu - H,I,J,K,L,M,N=Ch A=Con -A,B,C,D,E,F,G=Al B=Cu - A,B,C,D,E,F,G=Al - H,I,J,K,L,M,N=Ch - A,B,C,D,E,F,G=Fe A,B,C,D,E,F,G=Fe - H,I,J,K,L,M,N=Con A=Al - B=Cu - C=Ch- H,I,J,K,L,M,N=Con - I=Ch - Bal=Cu - H=Al - I=Ch - Bal=Cu A=Con -H=Al B,C=Cu - C,D,E,F=Cu - A,B,G,H=Con A,B,G,H=Con - C,D,E,F=Cu A=Al - B=Ch - A,B,C,D,E,F,G=Cu - H,I,J,K,L,M,N=Con A,C=Fe A,B,C,D,E,F,G=Cu - B,D=Con - H,I,J,K,L,M,N=Con - B,D,F,H,K,M,P,S=Con - A,C,E,G,J,L,N,R,T=Fe - B,D,F,H,K,M,P,S=Con A,C=Fe A,C,E,G,J,L,N,R,T=Fe - B,D=Con - R=Ch -- Bal=Cu - S=Al R=Ch - Bal=Cu A,C=Al -S=Al B,D=Ch - T=Cu - T=Cu - A,C,E,G,J,L,N,R=Fe - B,D,F,H,K,M,P,S=Con A,C=Ch A,C,E,G,J,L,N,R=Fe - B,D=Con - B,D,F,H,K,M,P,S=Con - Bal=Ch - G=Al - Bal=Ch n°1=Al -G=Al n°1=Ch - n°1=Cu - n°8=Al--n°8=Al n°1=Cu- n°1=Cu - n°8=Ch n°8=Ch A=Fe - B=Con - Bal=Cu -n°3=Al n°3=Ch- n°3=Ch - n°3=PhBz - n°3=Al - n°3=PhBz n°1=Ch - n°1=Al - n°2=Cu - B=Con--B=Con Bal=Cu- Bal=Cu - A=Fe A,C=Ch A=Fe - B,D=Al - C=Ch --B=Cu - A=Al C=Ch - B=Cu n°3=Fe A=Al - n°3=Con - Bal=Cu - n°4=Ch- n°4=Ch - I=Cu - I=Cu - n°4=Al n°1=Al -n°4=Al n°1=Ch - n°10=Cu - n°4=Al - n°10=Cu A,B=Fe n°4=Al - E,D=Con - C,F=Cu / (A=Fe - B,E=Con - D=Cu - C,F=Dummy) - C,D=Al- -C,D=Al Bal=Cu- Bal=Cu - A,B=Ch A,B=Ch A=Fe - B=Con - C=Ch - D=Al - E=Cu / (A=Fe - B=Con - C=Ch - D=Al - E=Dummy) - D=Ch -- Bal=Cu - B=Al D=Ch- C,F=Cu - Bal=Cu/ (A,D=Fe - B,E=Con - C,F=Dummy) A,D=Fe B=Al - B,E=Con - n°1=Al - n°1=Cu - n°12=Ch A,C=Al -n°12=Ch B,D=Ch - n°1=Al - n°1=Cu n°12=Ch - n°2=Al -n°2=Al - n°12=Ch A,C,E,G,I=Fe - B,D,F,H,J=Con - A,C,E,G=Fe - B,D,F,H=Con B,D,F,H=Con - A,C,E,G=Fe A,C,E=Al - B,D,F=Ch - B,D,F,H,K,M,P,S=Con - T,U,V=Cu 45A,C,E,G,J,L,N,R=Fe A,C,E,G,J,L,N,R=Fe - B,D,F,H,K,M,P,S=Con - T,U,V=Cu A,C=Fe - B,E,F=Con - D=Cu 45U=Al - N=Ch U=Al -- Bal=Cu N=Ch - Bal=Cu A,D=Al - B,C=Ch - E=Cu - C,D,E,H=Ch 300A,B,F,G=Al A,B,F,G=Al - C,D,E,H=Ch A,C=Fe - B,D=Con - E=Ch - F=Al - B,D,F,H,K,P,N=Con 45A,C,E,G,J,L,M=Fe A,C,E,G,J,L,M=Fe - B,D,F,H,K,P,N=Con A,B,C=Fe - D,E,F=Con - B,D,F,H,K,P,N=Con 45A,C,E,G,J,L,M=Cu A,C,E,G,J,L,M=Cu - B,D,F,H,K,P,N=Con A,C=Con - B,D=Cu - V=Al - U=Ch V=Al -- Bal=Cu U=Ch - Bal=Cu A=Fe - B=Con - Bal=Cu - B=Al - E=Ch B=Al--Bal=Cu E=Ch - Bal=Cu A,C,E,G,I=Cu - B,D,F,H,J=Con - E=Al - B=Ch E=Al--Bal=Cu B=Ch - Bal=Cu A,C,E=Cu - B,D,F=Con - B,D,F,H=Con - A,C,E,G=Fe A,C,E,G=Fe - B,D,F,H=Con A,D=Al - B,C=Ch - E=Cu - C=Ch --E=Fe - A=Al - B,D,G,H=Cu A=Al - B,D,G,H=Cu C=Ch--F=Con E=Fe - F=Con A=Al - B=Ch - Bal=Cu - A,E,L=Fe - C,G,N=Con - B,D,F,H,J,K,M,P=Cu B,D,F,H,J,K,M,P=Cu - A,E,L=Fe - C,G,N=Con A=Fe - B=Con - C=Ch - D=Al - E=Cu - Bal=Cu - A,C,E,G,H,K,M,P,R,T=Con A,C,E,G,H,K,M,P,R,T=Con - Bal=Cu n°2=Al - n°2=Ch - n°2=Cu - B,D=Cu - A,C=ConA,C=Con - B,D=Cu n°2=Fe n°2=Con Bal=Cu- Bal=Cu - E=Fe - D=Con E=Fe - -D=Con n°2=Fe - n°2=Con - B,M,D,F,H,K=Con - N,U,P,R,S,T=Cu - V=Dummy - A,L,C,E,G,J=Fe A,L,C,E,G,J=Fe - B,M,D,F,H,K=Con - N,U,P,R,S,T=Cu - V=Dummy n°2=Con - n°2=Cu A,L,C,E,G,J=Al - B,M,D,F,H,K=Ch - N,U,P,R,S,T=Cu - V=Dummy A,L,C,E,G,J=Al - B,M,D,F,H,K=Ch - N,U,P,R,S,T=Cu - V=Dummy n°2=Al - n°2=Ch n°2=Ch -- Bal=Cu Bal=Cu - n°2=Al -n°2=Al - n°2=Ch - Bal=Cu Materials description key: = Alumel, = Con Chromrel, Con = Constantan, Cu===Copper, Copper, =Iron, Iron, PhBz Phosphor Bronze, Dummy hole plug Materials description Al==Al Alumel, ChCh Chromel, Con Constantan, Cu Copper, Fe= Iron, PhBz Phosphor Bronze, Dummy =wire wire hole plug Materials description key: Al key: =key: Alumel, Ch = Chromel, = Constantan, Cu = Copper, Fe = Iron, PhBz =PhBz Phosphor Bronze, Dummy = wire=hole plug Materials description Al Alumel, Ch ==Chromel, Con ==Constantan, Cu Fe ===Phosphor Bronze, Dummy =Wire hole plug Degrees α ±2° © 2010 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] A-23 www.glenair.com Technical Data Glenair Series ITS and ITS-RG MIL-DTL-5015 Type Reverse Bayonet Connectors Insert Arrangements for Thermocouple Contacts Arrang. Insert Num ber of Contacts #16 A #12 Standard Insert 3 #8 20-22 Alternate Alternate Position Position Rotation Contact Material 20-222 3 - B=Fe - D=Con - Bal=Cu 20-50 17 - 20-29 - n°7=Al - n°7=Ch - n°3=Cu 20-51 8 - 20-7 - A,C,E,G=Ch - B,D,F,H=Al 20-52 - 4 20-4 315 A=Fe - B=Con - C=Ch - D=Al 20-56 - 8 20-7 45 A,B,G,H=Fe - C,D,E,F=Con 20-60 8 - 20-7 45 D=Ch - E=Al - Bal=Cu 20-61 17 - 20-29 45 A,B,M=Cu - Bal=Con 20-62 - 7 20-15 80 A,C,E=Al - B,D,F=Ch - G=Cu 20-64 14 - 20-27 - H=Al - C=Ch - Bal=Cu 20-641 14 - 20-27 - A,B,C,D,E,F,G=Al - H,I,J,K,L,M,N=Ch 20-65 14 - 20-27 - A,B,C,D,E,F,G=Fe - H,I,J,K,L,M,N=Con 20-67 7 2 20-16 - H=Al - I=Ch - Bal=Cu 20-68 8 - 20-7 - A,B,G,H=Con - C,D,E,F=Cu 20-69 14 - 20-27 - A,B,C,D,E,F,G=Cu - H,I,J,K,L,M,N=Con 20-70 17 - 20-29 - A,C,E,G,J,L,N,R,T=Fe - B,D,F,H,K,M,P,S=Con 20-71 17 - 20-29 - S=Al - R=Ch - Bal=Cu 20-74 17 - 20-29 - A,C,E,G,J,L,N,R=Fe - B,D,F,H,K,M,P,S=Con - T=Cu 20-75 - 7 20-15 - G=Al - Bal=Ch 20-76 17 - 20-29 - n°8=Ch - n°8=Al - n°1=Cu 20-77 9 - 20-A9 - n°3=Al - n°3=Ch - n°3=PhBz 20-78 - 4 20-4 - A=Fe - B=Con - Bal=Cu 20-80 - 3 20-3 - A=Al - C=Ch - B=Cu 20-81 8 1 20-21 - n°4=Al - n°4=Ch - I=Cu 20-82 14 - 20-27 - n°4=Al - n°10=Cu 20-83 14 - 20-27 - A,B=Ch - C,D=Al - Bal=Cu 20-84 3 3 #8 20-22 - B=Al - D=Ch - Bal=Cu 20-85 14 - 20-27 - n°12=Ch - n°1=Al - n°1=Cu 20-86 14 - 20-27 - n°2=Al - n°12=Ch 22-36 - 8 22-36 - B,D,F,H=Con - A,C,E,G=Fe 22-57 19 - 22-14 45 A,C,E,G,J,L,N,R=Fe - B,D,F,H,K,M,P,S=Con - T,U,V=Cu 22-60 19 - 22-14 45 U=Al - N=Ch - Bal=Cu 22-62 - 8 22-23 300 A,B,F,G=Al - C,D,E,H=Ch 22-68 14 - 22-19 45 A,C,E,G,J,L,M=Fe - B,D,F,H,K,P,N=Con 22-69 14 - 22-19 45 22-71 19 - 22-14 - V=Al - U=Ch - Bal=Cu 22-72 4 2 22-5 - B=Al - E=Ch - Bal=Cu 22-73 4 2 22-5 - E=Al - B=Ch - Bal=Cu 22-74 - 8 22-23 - A,C,E,G=Fe - B,D,F,H=Con 22-75 - 8 22-23 - A=Al - B,D,G,H=Cu - C=Ch - E=Fe - F=Con 22-77 14 - 22-19 - B,D,F,H,J,K,M,P=Cu - A,E,L=Fe - C,G,N=Con 22-78 19 - 22-14 - A,C,E,G,H,K,M,P,R,T=Con - Bal=Cu 22-79 4 - 22-10 - A,C=Con - B,D=Cu 22-81 2 3 22-34 - E=Fe - D=Con - Bal=Cu 22-82 19 - 22-14 - A,L,C,E,G,J=Fe - B,M,D,F,H,K=Con - N,U,P,R,S,T=Cu - V=Dummy 22-83 19 - 22-14 - A,L,C,E,G,J=Al - B,M,D,F,H,K=Ch - N,U,P,R,S,T=Cu - V=Dummy 22-85 4 2 22-5 - n°2=Al - n°2=Ch - Bal=Cu A,C,E,G,J,L,M=Cu - B,D,F,H,K,P,N=Con Materials description = Alumel, = Chromrel, Con = Constantan,Cu Cu==Copper, Copper, Fe Fe = Dummy = Wire hole plug Materials description key:key: Al =AlAlumel, ChCh = Chromel, Con = Constantan, = Iron, Iron, PhBz PhBz==Phosphor PhosphorBronze, Bronze, Dummy = wire hole plug Degrees α ±2° © 2010 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-24 Technical Data Glenair Series ITS and ITS-RG MIL-DTL-5015 Type Reverse Bayonet Connectors Insert Arrangements for Thermocouple Contacts Arrang. Ins e r t Num be r of Contacts #16 #12 Standar d Ins e rt Alternate Alte rnate Position Pos ition Rotation Contact M ate r ial 24-412 12 - 24-19 - 24-56 9 2 24-20 45 n°6=Cu - n°6=Con E=Al - F=Ch - Bal=Cu 24-57 24 - 24-28 45 A,C,J,V,Y,W ,K,E,H,U,S,M=Ch - Bal=Al 24-62 24 - 24-28 - A,C,E,G=Fe - B,D,F,H=Con - R,T=Ch - S,U=Al - Bal=Cu 24-621 24 - 24-28 - A,C,E,G,J,L,K,N,S,U,W ,Y=Fe - B,D,F,H,Q,R,M,P,T,V,X,Z=Con 24-622 24 - 24-28 - A,C,E,G,J,L,K,N,S,U,W ,Y=Ch - B,D,F,H,Q,R,M,P,T,V,X,Z=Al 24-63 24 - 24-28 - A,C,E,G,J,L,K,N,S,U,W ,Y=Cu - B,D,F,H,Q,R,M,P,T,V,X,Z=Con 24-64 16 - 24-5 - A,B,C,D,E,F,G,H=Fe - J,K,L,M,N,P,R,S=Con 24-68 24 - 24-28 - D=Con - Bal=Cu 24-69 12 - 24-19 - n°5=Con - n°7=Cu 24-70 24 - 24-28 - n°8=Ch - n°8=Al - n°8=PhBz 24-71 16 - 24-5 - A,B,C,D,E,F,G,H=Al - J,K,L,M,N,P,R,S=Ch 28-201 4 10 28-20 - 28-53 18 4 28-11 45 J,L=Al - K,M=Ch 28-58 4 10 28-20 45 A,C,E,G,K,M=Al - B,D,F,H,L,N=Ch - J,P=Cu 28-61 37 - 28-21 45 A,C,Z,m,r,n,a,K,F,H,X,k,h,T,M,N,d=Fe - Bal=Con 28-63 4 10 28-20 315 A,C,E,G,J=Al - B,D,F,H,P=Ch - Bal=Cu 28-64 35 - 28-15 - A,d=Al - B,j=Ch - C,D,E,F,G,N,P,R,S,H,J,K,L,M,W ,X,Y,Z=Con - Bal=Cu 28-65 26 - 28-12 - A,C,E,G,J,L,N,R,T,V=Fe - X,Z=Al - B,D,F,H,K,M,P,S,U,W =Con - Y,a=Ch - b,d=Cu 28-66 20 - 28-16 - n°10=Con - n°10=Cu 28-67 20 - 28-16 - 28-68 35 - 28-15 45 T=Al - U=Ch - Bal=Cu 28-69 18 4 28-11 - G=Al - R=Ch - Bal=Cu 28-70 18 4 28-11 - A=Al - B=Ch - Bal=Cu 28-77 20 - 28-16 - n°6=Fe - n°6=Con - Bal=Cu 28-78 35 - 28-15 - A,B=Ch - C,D=Al - Bal=Cu 28-80 20 - 28-16 - n°10=Fe - n°10=Con 28-81 35 - 28-15 - n°10=Al - n°10=Ch - Bal=Cu 28-811 35 - 28-15 - n°17=Ch - n°17=Al - n°1=Dummy 28-82 35 - 28-15 - n°12=Fe - n°12=Con - Bal=Cu 32-50 34 6 32-8 - M=Ch - N=Al - Bal=Cu 32-51 24 6 32-8 90 M=Ch - N=Al - Bal=Cu 32-55 24 6 32-8 125 32A-401 40 - 32A-40 - n°13=Al - n°13=Ch - n°14=Cu 36-101 48 - 36-10 - n°24=Al - n°24=Ch 36-102 48 - 36-10 - 36-53 40 7 36-7 45 36-56 48 - 36-10 - A,C,E,G,L,J,H,P,R,T,V,X,Z,b,d,f,h,k,q,m,n,u,w,y=Con - Bal=Cu 36-57 46 1 36-8 - W =Al - f=Ch - Bal=Cu 36-58 35 - 36-15 - H=Al - G=Ch - Bal=Cu 36-61 35 - 36-15 - A,C,E,J,K,L,M,N,P,R,T,V,f,X,Y,h,j,c=Con - Bal=Cu 36-62 48 - 36-10 - A,C,E=Al - B,D,F=Ch - Bal=Cu 36-63 48 - 36-10 - n°16=Al - n°16=Ch - n°16=Cu 36-64 48 - 36-10 - n°24=Fe - n°24=Con 40-58 85 - 40-56 - A,C,E,H,K,M,P,S,U,W ,Y,a,c,f,h,j,m,p,r,t,v,x,z,AB,AD,AF,AJ,AL,AN,AP,AS,AU,AW ,A Y,BA,BC,BE,BH,BK,BM,BP,BS,BU=Fe - Bal=Con 40-59 85 - 40-56 - B=Ch - C=Con - Bal=Cu A A,C,E,G,J,P=Con - Bal=Cu U=Con - Bal=Cu M,N=Ch - O,P=Al - Bal=Cu n°24=Ch - n°24=Con U,V,W =Al - X,Y,Z=Ch - Bal=Cu Materials description = Alumel, = Chromrel, Con = Constantan,Cu Cu==Copper, Copper, Fe = Iron, Dummy = Wire hole plug Materials description key:key: Al =AlAlumel, ChCh = Chromel, Con = Constantan, Iron, PhBz PhBz==Phosphor PhosphorBronze, Bronze, Dummy = wire hole plug Degrees α ±2° © 2010 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] A-25 www.glenair.com