Mod Code 653 for Polarized Mating Hardware

SERIES 79 MICRO-CRIMP
Mod Code 653
for polarized hardware
For polarized mating hardware, add mod code -653 to the end of any Series 79 Micro-Crimp
connector part number.
The connector flange is modified to accept polarized hardware with a hex machined into the
flange to provide clocking.
The desired hardware (screwlock or jackpost) is specified in the regular part number.
Ordering Information
C-13
790-XXXX
Sample Part Number
M
P
653
-1
Basic Part Number
Micro-Crimp
Connector
Shell SizeContact Arrangement
See Series 79 Micro-Crimp catalog
Shell Finish
Finish option per
Series 79 Micro-Crimp catalog
Mating Hardware
T = Polarized extended captivated screwlock
P = Polarized female jackpost
Mod Code 653
Polarized Mating Hardware
Factory Installed Hardware
Keying Position
See Tables for Keying positions. Omit for customer installation
Mating Hardware
MALE POLARIZING
HARDWARE
CONNECTOR
SHELL
JACKPOST
JACKPOST
FEMALE
POLARIZING
HARDWARE
JACKSCREW
SHELL
FEMALE
POLARIZING
HARDWARE
SHELL
WASHER
HEX RETAINER
NUT
Figure 1:
Jackscrew Assembly
1
Figure 2:
Jackpost Assembly,
Cable Connector Style
© 2014 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
Figure 3:
Jackpost Assembly,
Panel Mount Style
SERIES 79 MICRO-CRIMP
Mod Code 653
for polarized hardware
Table 1: Jackscrew Assembly Keying Positions
POSITION "1"
POSITION "2"
POSITION "3"
POSITION "4"
POSITION "5"
POSITION "6"
POSITION "7"
POSITION "8"
POSITION "9"
POSITION "10"
POSITION "11"
POSITION "12"
POSITION "13"
POSITION "14"
POSITION "15"
POSITION "16"
POSITION "17"
POSITION "18"
POSITION "19"
POSITION "20"
POSITION "21"
POSITION "22"
POSITION "23"
POSITION "24"
POSITION "25"
POSITION "26"
POSITION "27"
POSITION "28"
POSITION "29"
POSITION "30"
POSITION "31"
POSITION "32"
POSITION "33"
POSITION "34"
POSITION "35"
POSITION "36"
Table 2: Jackpost Assembly Keying Positions
POSITION "1"
POSITION "2"
POSITION "3"
POSITION "4"
POSITION "5"
POSITION "6"
POSITION "7"
POSITION "8"
POSITION "9"
POSITION "10"
POSITION "11"
POSITION "12"
POSITION "13"
POSITION "14"
POSITION "15"
POSITION "16"
POSITION "17"
POSITION "18"
POSITION "19"
POSITION "20"
POSITION "21"
POSITION "22"
POSITION "23"
POSITION "24"
POSITION "25"
POSITION "26"
POSITION "27"
POSITION "28"
POSITION "29"
POSITION "30"
POSITION "31"
POSITION "32"
POSITION "33"
POSITION "34"
POSITION "35"
POSITION "36"
NOTES
For Series 79 Micro-Crimp panel mount Mod Code 653 connectors, the “G Basic” (outboard
mounting holes) and the “F Max” (overall connecter length) dimensions are lengthened.
Glenair recommends installing jackposts with a thread locker for all panel mount connectors.
Hex Retainer Installation Tools:
Shell Sizes A-J & K: 799-096-170
Shell Sizes H & L: 799-096-225
2
© 2014 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
SERIES 79 MICRO-CRIMP
Mod Code 653
for polarized hardware
A MAX
B BASIC
SHELL SIZES A,B,C,D,E,F,G,J & K
2.620 MAX
(66.55 MAX)
2.356 BASIC
(59.84 BASIC)
3.144 MAX
(79.86 MAX)
2.830 BASIC
(71.88 BASIC)
SHELL SIZE H
2.856 MAX
(72.54 MAX)
SHELL SIZE M
2.592 BASIC
(65.84 BASIC)
SHELL SIZE L
Shell Size
A
B
C
D
E
F
G
J
K
3
A Max
In.
1.271
1.421
1.571
1.671
1.821
1.971
1.921
2.321
2.721
mm
32.28
36.09
39.90
42.44
46.25
50.06
48.79
58.95
69.11
© 2014 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
B Basic
In.
mm
.985
25.02
1.135
28.83
1.285
32.64
1.385
35.18
1.535
38.99
1.685
42.80
1.275
32.39
2.035
51.69
2.435
61.85