Series 72 Guardian 712-852 Metal EMI/RFI Environmental Bulkhead Feed-Thru Fitting for Series 72 Annular Convoluted Tubing Metal Guardian System bulkhead feed-thru fitting How To Order Product Series 712 Basic No. S 852 nf Bulkhead Size (Table I) 16 Finish (Table II) Angle: S = Straight M = 45° N = 90° “D” Hole Mounting Flat (Omit for None) B = Band K = Precoiled (Omit if Not Required) 12 B Entry Size (Table III) t D Shrink Boot Option (See Table III, Omit if Not Required) 1.00 Max .135 typ .36 max typ o-ring Typ d flats typ Flat for “D” Hole mounting (see p/n development) e d-cut .060 Typ Conduit o-ring 2x typ Conduit Retaining Clip C Dia Typ Conduit I.D. .125 max panel thickness typ band option (k option shownsee notes) .380 Typ Symbol S Straight F Max Typ tubing shown for ref. only Accommodates 600-052-1 Band typ Shrink Sleeve or Boot Groove typ A Thread typ Material and Finish Adapters, elbows: See Table II O-rings: Silicone/NA Retaining Clip: High Grade Engineering Thermoplastic/NA Tools, Accessories and Assembly notes B dia recommended panel cutout ©2011 Glenair, Inc. Tubing shown for Reference only. Glenair 600 Series backshell assembly tools are recommended for assembly and installation. Glenair Assembly procedure AP74-010 is recommended for adapter to conduit termination. Conduit retaining clip and O-ring to be supplied unassembled. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 20 Series 72 Guardian 712-852 Metal EMI/RFI Environmental Bulkhead Feed-Thru Fitting for Series 72 Annular Convoluted Tubing G Table I H Symbol M Full-Radius Profile 45° Bulkhead Size A Thread Class 2A B +.015 -.000 C Dia D Flats E +.010 -.000 Max Entry Size 06 08 09 10 12 14 16 20 24 28 32 40 3/8-32 UNEF 7/16-28 UNEF 1/2-20 UNF 1/2-20 UNF 9/16-24 UNEF 5/8-24 UNEF 11/16-24 UNEF 13/16-20 UNEF 15/16-20 UNEF 1 1/16-18 UNEF 1 3/16-18 UNEF 1 7/16-18 UNEF 0.380 (9.7) 0.443 (11.3) 0.505 (12.8) 0.505 (12.8) 0.568 (14.4) 0.63 (16.0) 0.693 (17.6) 0.818 (20.8) 0.943(24.0) 1.068 (27.1) 1.193 (30.3) 1.443 (36.7) 0.188 (4.8) 0.250 (6.4) 0.281 (7.1) 0.312 (7.9) 0.375 (9.5) 0.438 (11.1) 0.500 (12.7) 0.625 (15.9) 0.750 (19.1) 0.875 (22.2) 1.000(25.4) 1.250 (31.8) 0.625 (15.9) 0.688 (17.5) 0.750 (19.1) 0.750 (19.1) 0.812 (20.6) 0.875 (22.2) 0.937 (23.8) 1.062 (27.0) 1.250 (31.8) 1.375 (34.9) 1.562 (39.7) 1.875 (47.6) 0.323 (8.2) 0.385 (9.8) 0.448 (11.4) 0.448 (11.4) 0.510 (13.0) 0.573 (14.6) 0.635 (16.1) 0.760 (19.3) 0.885 (22.5) 1.010 (25.7) 1.135 (28.8) 1.385 (35.2) 09 12 12 12 16 16 20 20 24 32 32 40 Table II J Sym M MT NF ZN Symbol N Full-Radius Profile 90° K ZNU Z1 Material Finish Description Electroless Nickel Nickel-PTFE Cad/Olive Drab over Electroless Nickel Aluminum Zinc Nickel/Olive Drab over Electroless Nickel Zinc Nickel/Black over Electroless Nickel Stainless Passivate Steel Table III F Max Entry Size 06 09 12 16 20 24 28 32 40 0.53 0.63 0.73 0.86 0.98 1.15 1.27 1.40 1.62 ©2011 Glenair, Inc. (13.5) (16.0) (18.5) (21.8) (24.9) (29.2) (32.3) (35.6) (41.1) Conduit I.D. Min Max 0.16 (4.1) 0.24 (6.1) 0.33 (8.4) 0.45 (11.4) 0.57 (14.5) 0.69 (17.5) 0.81 (20.6) 0.93 (23.6) 1.18 (30.0) 0.19 0.28 0.37 0.50 0.62 0.75 0.87 1.00 1.25 (4.8) (7.1) (9.4) (12.7) (15.7) (19.1) (22.1) (25.4) (31.8) G Max 0.50 0.53 0.53 0.55 0.61 0.63 0.68 0.71 0.76 (12.7) (13.5) (13.5) (14.0) (15.5) (16.0) (17.3) (18.0) (19.3) H Max 1.02 (25.9) 1.04 (26.4) 1.04 (26.4) 1.07 (27.2) 1.12 (28.4) 1.15 (29.2) 1.20 (30.5) 1.22 (31.0) 1.28 (32.5) CAGE Code 06324 J Max 0.68 (17.3) 0.75 (19.1) 0.75 (19.1) 0.81 (20.6) 0.93 (23.6) 1.00 (25.4) 1.12 (28.4) 1.18 (30.0) 1.31 (33.3) K Max 1.20 (30.5) 1.26 (32.0) 1.26 (32.0) 1.33 (33.8) 1.45 (36.8) 1.51 (38.4) 1.64 (41.7) 1.70 (43.2) 1.83 (46.5) Shrink Boot Ref 770-001S103 770-001S103 770-001S104 770-001S104 770-001S105 770-001S106 770-001S107 770-001S107 770-001S107 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 21