Series 72 Guardian 713-356 Composite Self-Locking EMI/RFI Environmental Connector Adapter for Series 72 Annular Convoluted Tubing Composite Guardian System connector adapter How To Order Angle: S, T, W Product Series 713 Self-Locking h s 356 xm 19 Connector Designator A = MIL-DTL-83723, Ser. 1 & 3 MIL-DTL-5015, MS3400 MIL-C-26482, Ser. 2 F = MIL-DTL-38999, Ser. I & II H = MIL-DTL-38999, Ser. III & IV c flats typ Finish (Table III) Basic No. anti-decoupling device - typ o-ring - typ as required a thread - typ Dash No. (Table I) 1.4 (35.6 ) max .44 (11.2) typ b typ Entry Code (Table II) 16 K = Supplied with precoiled band, 600-052-1 (Omit for none) d k Drain Hole Option (Omit for None) Shrink Boot option See Table II (Omit for none) conduit o-ring 2X typ conduit retaining clip typ conduit i.d. Symbol S Straight T j tubing shown for ref. only Accommodates 600-052-1 Band - typ Shrink Sleeve or Boot Groove - typ band option (k option shownsee notes) Material and Finish Elbow, adapter: High grade engineering thermoplastic/See Table III Coupling nut, conduit retaining clip: High grade engineering thermoplastic/no plating Anti-decoupling device: Corrosion resistant material/NA O-rings: Silicone/NA Tools and Assembly notes Conduit retaining clip and conduit O-ring to be supplied unassembled For effective grounding, connector with conductive Finish should be used Glenair assembly procedure AP74-010 is recommended for adapter to conduit termination Glenair 600 Series backshell assembly tools are recommended for assembly and installation ©2011 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 22 Series 72 Guardian 713-356 Composite Self-Locking EMI/RFI Environmental Connector Adapter for Series 72 Annular Convoluted Tubing Table I Connector Designator A Dash Shell A Thread No. Size Ref Class 2B 08 10 12 14 16 18 20 22 24 08 10 12 14 16 18 20 22 24 Connector Designator F Dash Shell A Thread No. Size Ref Class 2B 1/2-20 UNF 5/8-24 UNEF 3/4-20 UNEF 7/8-20 UNEF 1-20 UNEF 1 1/16-18 UNEF 1 3/16-18 UNEF 1 5/16-18 UNEF 1 7/16-18 UNEF 08 10 12 14 16 18 20 22 24 09 11 13 15 17 19 21 23 25 Connector Designator H Dash Shell A Thread Iso B Dia Max No. Size Ref Metric 7/16-28 UNEF 9/16-24 UNEF 11/16-24 UNEF 13/16-20 UNEF 15/16-20 UNEF 1 1/16-18 UNEF 1 3/16-18 UNEF 1 5/16-18 UNEF 1 7/16-18 UNEF 09 11 13 15 17 19 21 23 25 A B C D E F G H J M12 X 1.0-6H M15 X 1.0-6H M18 X 1.0-6H M22 X 1.0-6H M25 X 1.0-6H M28 X 1.0-6H M31 X 1.0-6H M34 X 1.0-6H M37 X 1.0-6H .83 (21.1) .96 (24.4) 1.09 (27.7) 1.22 (31.0) 1.35 (34.3) 1.48 (37.6) 1.62 (41.1) 1.75 (44.5) 1.89 (48.0) Table I (cont.) Conn Desig A,F H 08 10 12 14 16 18 20 22 24 09 11 13 15 17 19 21 23 25 D ±.06 (1.5) .69 .75 .81 .88 .94 .97 1.06 1.13 1.19 (17.5) (19.1) (20.6) (22.4) (23.9) (24.6) (26.9) (28.7) (30.2) E ±.09 (2.3) .88 (22.4) 1.00 (25.4) 1.13 (28.7) 1.31 (33.3) 1.38 (35.1) 1.44 (36.6) 1.63 (41.4) 1.75 (44.5) 1.88 (47.8) Max Min .750 (19.1) .875(22.2) 1.000(25.4) 1.125 (28.6) 1.250(31.8) 1.375(34.9) 1.500(38.1) 1.625(41.3) 1.750(44.5) .736 (18.7) .860(21.8) .980(24.9) 1.100(27.9) 1.224 (31.1) 1.348(34.2) 1.469(37.3) 1.581(40.2) 1.690(42.9) Table II F ±.09 (2.3) 1.19 1.25 1.31 1.38 1.44 1.47 1.56 1.63 1.69 C Flats G ±.06 (1.5) (30.2) (31.8) (33.3) (35.1) (36.6) (37.3) (39.6) (41.4) (42.9) .72 .75 .75 .76 .78 .79 .82 .86 .89 H ±.09 (2.3) (18.3) (19.1) (19.1) (19.3) (19.8) (20.1) (20.8) (21.8) (22.6) 1.00 1.06 1.13 1.16 1.18 1.19 1.22 1.26 1.29 (25.4) (26.9) (28.7) (29.5) (30.0) (30.2) (31.0) (32.0) (32.8) Entry Code J Max 06 09 12 16 20 24 28 32 .53 (13.5) .63 (16.0) .73 (18.5) .86 (21.8) .98 (24.9) 1.15 (29.2) 1.27 (32.3) 1.40 (35.6) Conduit I.D. Min Max .16 .24 .33 .45 .57 .69 .81 .93 (4.1) (6.1) (8.4) (11.4) (14.5) (17.5) (20.6) (23.6) .19 .28 .37 .50 .62 .75 .87 1.00 Shrink Boot (4.8) (7.1) (9.4) (12.7) (15.8) (19.1) (22.2) (25.4) 770-001S103 770-001S103 770-001S104 770-001S104 770-001S105 770-001S106 770-001S107 770-001S107 Table III Symbol xm xw XB e d Finish Description Electroless Nickel Cad/Olive Drab over Electroless Nickel Black color/Unplated g Symbol W 90° h f Drain Holes Optional - typ tubing shown for ref. only ©2011 Glenair, Inc. Symbol T 45° CAGE Code 06324 tubing shown for ref. only Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 23