Technical Data Glenair Series ITS MIL-DTL-5015 Type Reverse Bayonet Connectors 03 Summary of Connector Styles and Backshells 030 Receptacles Plugs 00 Selected Shell Styles 05 ITS 00 Front Panel Mount Square Flange Receptacle with Accessory Threads A ITS 02 Front Panel Mount Square Flange Receptacle. No Accessory Thread ITS 01 In Line Cylindrical Receptacle with Accessory Thread 02 00 00 00 00 00 00 00 00 02 00 01 02 02 02 ITS 03 Rear Panel Mount Square Flange Receptacle. No Accessory Thread PG/M 02 02 02 02 01 01 03 01 03 030 03 03 A/R Standard Backshell 02 02 02 Metric Thread Straight Adapter 01 01 01 01 00 01 00 N2N5 Long Backshell with Cable Clamp Type “C” 06 Standard Coupling Nut 01 Rear Panel Mount Square Flange Receptacle with Accessory Thread Panel Mounting Plug 00 00 01 01 ITS 030 26 03 02 03 03 02 03 N8 Long Backshell with Cable Clamp Type “A” 03 03 03 03 05030 030 030 030 01 030030 030 01 06 GG Rubber Covered Coupling Nut RS Lipped Backshell 030 030 030 ITS 05 Dummy Plug Stowage Receptacle 05030 05 05 ITS 07 Rear Panel Mount Jam nut Receptacle. No Accessory Thread 05 05 05 05 03 05 03 05 05 05 GR Backshell with Rotating Coupling Nut Shrink Boot Adapter 030 030 ITS 070 Rear Panel Mount Jam nut Receptacle with Accessory Thread 05 PHM 05 Environmental Cable Clamp PHM-EMI ITS PP EMI/RFI Environmental Cable Clamp Through Bulkhead Square Flange Receptacle. © 2010 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-2 Technical Data Glenair Series ITS MIL-DTL-5015 Type Reverse Bayonet Connectors Summary of Connector Styles and Backshells Backshells and Accessories Adapters and Cable Clamps L ØQ 08 PHM 90° Backshell with EMI/RFI Environmental Cable Clamp U N2 Long Backshell N5 A 08 ØB 90° Backshell Cable Clamp and Seal BR N1 BR Backshell Cable Clamp Single Wire 08F 90° Backshell with Cable Clamp and Bushing 08 PG/M 08 N5 G 90° Backshell with Cable Clamp and Seal Backshell for Heat Shrink Boot SP 08 SP 90° Backshell EMI/RFI Shield Termination F ZLF L S BAND-IT® EMI/RFI Banding Backshell Table II 3.5 L K M ØH © 2010 Glenair, Inc. ØQ 08 GR G L1 ØB U.S. CAGE Code 06324 ØC 90° Backshell with Rotating Coupling Boot Nut Shrink Adapter U Disegno eseguito con CAD. Non sono ammesse modifiche manuali. - RIPRODUZIONE VIETATA - La ditta tutela i propri diritti sui disegni a termine di legge. Locazione: Errore: Nessun riferimento EMI/RFI Shield Termination Straight Backshell Elbow Adapter with PG or Metric Thread ØE ØF Printed in U.S.A. ØD K GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] A-3 SIZE F G H R S T (max) (+0.2/0) (0/-0.1) (±0.1) ±0.1 (+0.1/0) 10SL 54 14.3 18.2 18.25 21.8 3.2 14S 54 14.5 24.5 23 28.8 3.2 16S 54 14.5 27.2 24.6 30.5 16 66 19.1 27.2 24.6 30.5 3.2 18 66 19.1 30.7 27 33.8 3.2 20 67 19.1 34 29.4 36.9 3.2 22 67 19.6 37.3 31.75 39.5 3.2 24 70 20.6 40.9 34.9 43.9 3.7 www.glenair.com 3.2 MATERIALE ATTENZIONE: Nei pezzi non devono presentarsi spigoli vivi e bave di lavorazione. SUPERF. cm² GRUPPO