Micro-D MIL-DTL-83513 Type 240-078 Rear Panel Mount Micro-D Filter Connectors Condensed Board Right Angle Type Glenair Filtered Right Angle Micro-D's provide EMI solutions in a miniaturized M83513 Micro-D connector. These connectors feature ceramic capacitor planar arrays and ferrite inductors. Choose Pi or C Filter Arrays in eight filter classes and six layouts. Glenair filtered Micro-D connectors comply with applicable MIL-DTL-83513 requirements and are 100% intermateable with standard connectors. .100” x .100” Board Spacing- These connectors are similar to “CBR” style Micro-D’s and share the same board footprint, allowing retrofit to existing boards. ylbmessA elcatpeceR S52 D How To Order Micro-D Filtered Right Angle PCB Sample Part Number 240-078 Series -2 -25 S C F -R1 240-078 Aluminum Shell 1 - Cadmium 2 - Nickel 5 - Gold 6 - Chem Film 33 - Nickel/PTFE 9, 15, 21, 25, 31, 37 (See Table II) P - Pin S - Socket C - C Filter P - Pi Filter A, B, C,D, E, F, G, J (See Table I) Rear Panel Mount Hardware Option (See Note 1) R1 - 0.032" (0.8) Panel R2 - 0.047" (1.2) Panel R3 - 0.062" (1.6) Panel R4 - 0.093" (2.4) Panel R5 - 0.125" (3.2) Panel R6 - 0.080" (2.0) Panel T - Threaded insert in board mount hole N - No threaded insert .080 .110 .125 .140 .150 .172 .190 .250 G - Ground spring installed N - No ground spring (N applies to all receptacle assemblies) C - Conductive N - Non-Conductive (Nitrile) Shell Finish Contact Layout Contact Type Filter Type Filter Class Hardware Option Insert Lead Length Plug EMI Ground Spring O-Ring T -.110 N N (See Note 2) Table I: Micro-D Filter Classes and Performance Filter Class A B C Filter Pi Filter 19000-28000 38000-56000 16000-22500 32000-45000 © 2013 Glenair, Inc. C D Capacitance (pF) 9000-16500 4000-6000 18000-33000 8000-12000 E F G J 1650-2500 3300-5000 400-650 800-1300 200-300 400-600 35–60 70–120 Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Rev. Jun. 2 2014 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-28 E-Mail: [email protected] Micro-D MIL-DTL-83513 Type 240-078 Rear Panel Mount Micro-D Filter Connectors Condensed Board Right Angle Type Table II: Dimensional Table Dimensional Table J B 1.205 Max Pi Filter .865 Max C Filter .094 G H C Max F A Pin 1 B D 25 AWG (Ø.018) Solder Dipped Leads SKT 1 E Max K D Shell Size 9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S A ±.005 in. mm 0.960 24.38 0.960 24.38 1.110 28.19 1.110 28.19 1.260 32.00 1.260 32.00 1.360 34.54 1.360 34.54 1.510 38.35 1.510 38.35 1.660 42.16 1.660 42.16 Notes B ±.003 in. mm 0.565 14.35 0.565 14.35 0.715 18.16 0.715 18.16 0.865 21.97 0.865 21.97 0.965 24.51 0.965 24.51 1.115 28.32 1.115 28.32 1.265 32.13 1.265 32.13 C Max in. mm 0.334 8.48 0.400 10.16 0.484 12.29 0.550 13.97 0.634 16.10 0.700 17.78 0.734 18.64 0.800 20.32 0.884 22.45 0.950 24.13 1.034 26.26 1.100 27.94 D ±.005 in. mm 0.480 12.19 0.480 12.19 0.480 12.19 0.480 12.19 0.480 12.19 0.480 12.19 0.480 12.19 0.480 12.19 0.480 12.19 0.480 12.19 0.480 12.19 0.480 12.19 E Max in. mm 0.184 4.67 0.250 6.35 0.184 4.67 0.250 6.35 0.184 4.67 0.250 6.35 0.184 4.67 0.250 6.35 0.184 4.67 0.250 6.35 0.184 4.67 0.250 6.35 1. Mounting holes fitted with 2x .086-56 threaded insert, .15 min thread. (T3585-02CPF129). 2. Ground spring not available on cadmium plated assemblies. 3. Interface dimensions per MIL-DTL-83513. 4. Electrical performance: I.R.: 5000 Megohms min at 100 VDC D.W.V.: 200 VDC 5. Assembly to be identified with Glenair’s name, part number, date code, and pin 1 identification. 6. See 240-034 for PCB layout © 2013 Glenair, Inc. F±.003 in. mm 0.183 4.65 0.195 4.95 0.183 4.65 0.195 4.95 0.183 4.65 0.195 4.95 0.183 4.65 0.195 4.95 0.183 4.65 0.195 4.95 0.183 4.65 0.195 4.95 G±.010 in. mm 0.421 10.69 0.421 10.69 0.321 8.15 0.321 8.15 0.321 8.15 0.321 8.15 0.321 8.15 0.321 8.15 0.321 8.15 0.321 8.15 0.321 8.15 0.321 8.15 H±..010 in. mm 0.441 11.20 0.441 11.20 0.441 11.20 0.441 11.20 0.441 11.20 0.441 11.20 0.441 11.20 0.441 11.20 0.441 11.20 0.441 11.20 0.441 11.20 0.441 11.20 J Max in. mm 0.787 19.99 0.787 19.99 0.937 23.80 0.937 23.80 1.087 27.61 1.087 27.61 1.187 30.15 1.187 30.15 1.337 33.96 1.337 33.96 1.487 37.77 1.487 37.77 K Max in. mm 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 0.310 7.87 Materials / Finishes: • • • • • Shell - Aluminum Alloy/See Chart Insulator - LCP/NA Contacts - Copper Alloy/Gold Plated Ground Spring - Stainless Steel/Gold Plated Socket Interfacial Seal: Flourosilicone Dimensions in inches (millimeters) and are subject to change without notice. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-29 E-Mail: [email protected]