OPTOWAY TRSL-5380W

Optoway
TRSL-5380W-CXX0G
1
***********************************************************************************************************************************************************************
TRSL-5380W-CXX0G
3.3V / CWDM / 622 Mbps SFF LC 2X10 SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l
l
l
l
The TRSL-5380W-CXX0G series single mode transceivers
is low power, high performance CWDM modules for
bi-directional serial optical data communications such as
long-reach SONET OC-12 LR / SDH STM-4 and Fast
Ethernet. There are eighteen center wavelengths available
from 1270 nm to 1610 nm, each step 20 nm. A guaranteed
minimum optical link budget of 29 dB is offered. The
transmitter section uses a multiple quantum well CWDM
DFB laser and is a class 1 laser compliant according to
International Safety Standard IEC-60825. The receiver
section uses an integrated InGaAs detector preamplifier
(IDP) mounted in an optical header and a limiting
post-amplifier IC. A PECL logic interface simplifies
interface to external circuitry.
Duplex LC Single Mode Transceiver
SONET OC-12 LR / SDH STM-1 Compliant
Small Form Factor, RJ-45 size, 2X10 pin Package
18-Wavelength CWDM DFB LD Transmitter from
1270 nm to 1610 nm, with step 20 nm
l 29 dB Link Budget at Least
l Analog Monitor Function
-- Transmitter Laser Bias Current
-- Transmitter Laser Optical Power Monitor
-- Receiver Photo Detector Current
l LVPECL Signal Input / Output
l LVTTL Transmitter Disable Input
l LVTTL Signal Detection Output
l Single +3.3 V Power Supply
l 0 to 70oC Operation
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC 60825
Compliant
APPLICATIONS
l ATM 622 Mbps Links
l SONET/SDH Equipment Interconnect
l Fiber Channel 533 Mb/s Links
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate
(Mb/s)
SONET
/SDH
TRSL-5380W-CXX0G
622
LR
Power
Budget
(dB)
> 29
Wavelength Package
(nm)
CWDM*
2X10 LC
Temp.
(oC)
0 to 70
TX Power RX Sens.
RoHS
(dBm)
(dBm) Complaint
5 to 0
-29
Yes
o
CWDM Wavelength (0 to 70 C)
Central
Min.
Typ.
Max.
Central
Wavelength
(nm)
(nm)
(nm)
Wavelength
-C270
1264.5
1270
1277.5
-C450
-C290
1284.5
1290
1297.5
-C470
-C310
1304.5
1310
1317.5
-C490
-C330
1324.5
1330
1337.5
-C510
-C350
1344.5
1350
1357.5
-C530
-C370
1364.5
1370
1377.5
-C550
-C390
1384.5
1390
1397.5
-C570
-C410
1404.5
1410
1417.5
-C590
-C430
1424.5
1430
1437.5
-C610
CWDM*: 18 Wavelengths from 1270 nm to 1610 nm, each step 20 nm.
Min.
(nm)
1444.5
1464.5
1484.5
1504.5
1524.5
1544.5
1564.5
1584.5
1604.5
Typ.
(nm)
1450
1470
1490
1510
1530
1550
1570
1590
1610
Max.
(nm)
1457.5
1477.5
1497.5
1517.5
1537.5
1557.5
1577.5
1597.5
1617.5
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
12/1/2005 V3.0
Optoway
TRSL-5380W-CXX0
2
***********************************************************************************************************************************************************************
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Power Supply Voltage
Input Voltage
Output Current
Symbol
Tstg
Topr
--Vcc
--Iout
Min
-40
0
0
GND
Max
85
70
260
4.5
Vcc
Units
o
C
o
C
o
C
V
V
0
30
mA
Min
3.13
0
50
Typ
3.3
Max
3.47
70
Notes
With air flow 1m/sec
10 seconds on leads only
Recommended Operating Conditions
Parameter
Power Supply Voltage
Operating Temperature
Data Rate
Power Supply Current
Symbol
Vcc
Topr
622
200
Icc
Units / Notes
V
o
C / air flow 1m/sec
Mb/s
mA
300
Transmitter Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3.47V)
Parameter
Optical
Optical Transmit Power
Output Center Wavelength
Output Spectrum Width
Side Mode Suppression Ratio
Extinction Ratio
Output Eye
Optical Rise Time
Optical Fall Time
Relative Intensity Noise
Total Jitter
Electrical
Data Input Current – Low
Data Input Current – High
Differential Input Voltage
Data Input Voltage – Low
Data Input Voltage -- High
Disable Input Voltage -- Low
Disable Input Voltage -- High
Shut Off Time for TxDis
Symbol
Min
Typ
Max
Units
Po
0
--5
dBm
λ-5.5
λ+7.5
nm
λ
λ
----1
nm
∆λ
SMSR
30
dB
ER
10
----dB
Compliant with Bellcore GR-253-CORE and ITU recommendation G.957
tr
1.2
ns
tf
1.2
ns
RIN
-120
dB/Hz
TJ
0.55
ns
IIL
IIH
VIH - V IL
VIL - V CC
VIH - V CC
VTDIS,L
VTDIS,H
tDIS
-350
350
300
-2.0
-1.1
0
Vcc – 1.3
-1.58
-0.74
0.5
Vcc
1
µA
µA
mV
V
V
V
V
ms
Notes
1
2
-20 dB Width
10% to 90% Values
10% to 90% Values
3
4
4
TX Output Enabled
TX Ouput Disabled
Notes: 1. Output power is power coupled into a 9/125 µm single mode fiber.
2. ITU-T G.694.2 CWDM wavelength from 1270 nm to 1610 nm, each step 20 nm.
3. Measured with a 223-1 PRBS with 72 ones and 72 zeros.
4. These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
12/1/2005 V3.0
Optoway
TRSL-5380W-CXX0
3
***********************************************************************************************************************************************************************
Receiver Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V)
Parameter
Optical
Sensitivity
Maximum Input Power
Signal Detect -- Asserted
Signal Detect -- Deasserted
Signal detect -- Hysteresis
Wavelength of Operation
Electrical
Data Output Voltage – Low
Data Output Voltage – High
Signal Detect Output Voltage -- Low
Signal Detect Output Voltage -- High
Symbol
Min
Typ
Max
Units
Notes
--Pin
Pa
Pd
---5
---43
1.0
1100
---
-29
---29
---
dBm
dBm
dBm
dBm
dB
nm
1
VOL - V CC
VOH - V CC
VOL
VOH
---------
1620
-2.0
-1.1
-1.58
-0.74
0.8
V
V
V
V
2.0
Transition: low to high
Transition: high to low
2
2
Notes: 1. Minimum sensitivity and saturation levels at BER=1E-10 for a 223-1 PRBS with 72 ones and 72 zeros.
2. These outputs are compatible with 10K, 10KH and 100K ECL and PECL outputs.
ANALOG DIAGNOSTICS FUNCTIONS
Parameter
Transmitter
Laser Bias Current Monitor
Monitor Photodiode Current Monitor
Receiver
Received Photocurrent
Photodiode Responsivity
Applied Voltage at VpdR pin
Symbol
Min
Bmon+, BmonPmon+,Pmon-
0
0
Rpd
R
Vpd
0
0.5
2.4
Typ
0.9
Max
Units
Notes
Vcc
Vcc
V
V
1
2
1
1.0
Vcc
mA
A/W
V
3
3
Notes: 1. PIN 17 and 18 provide an analog voltage output proportional to the laser bias current, based on the following
formula: Ibias = V (Bmon+ - Bmon-) / 10 Ω. See below the equivalent circuit.
2. PIN 19 and 20 provide an analog voltage output proportional to the monitor photodiode current, based on the
following formula: Imon = V (Pmon+ - Pon-) / 200Ω. See below the equivalent circuit.
3. PIN 1 is used to monitor the received photocurrent. It must be connected to a positive voltage within the specified
above. The received power is given by the photocurrent multiplied by the photodiode responsivity.
VCC
VCC
LD
Monitor PD
Vpdr
BM+
3K
I bias
3K
Pmon+
RX PD
I pd
200ohm
10ohm
3K
bias
circuit
I mon
BM-
3K
control
circuit
Pmon-
T
Analog Monitoring Function Connections
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
12/1/2005 V3.0
Optoway
TRSL-5380W-CXX0
4
***********************************************************************************************************************************************************************
CONNECTION DIAGRAM
PIN Symbol
Notes
PIN Symbol
1
VpdR Receiver power monitor. This pin must be 11
2
3
connected to a positive power supply (Vcc),
preferably via a small resistor. Supplier
photocurrent and maybe used to monitor receiver
power.
Receiver ground.
12
Receiver ground.
13
VeeR
VeeR
Notes
VccT +3.3V dc transmitter power supply
VeeT Transmitter ground.
T Dis Transmitter Disable. Connect this pin to logic “1”
4
5
6
7
8
NC
NC
VeeR
VccR
SD
No connected
No connected
Receiver ground.
+3.3V dc receiver power supply
Signal detect. Logic 1 indicate a normal operation.
14
15
16
17
18
TD +
TD −
VeeT
Bmon−
Bmon+
9
10
RD−
RD+
Receiver Dataout Bar
Receiver Dataout
19
20
PmonPmon+
MS
MS
to disable module. To enable module connect to
logic low “0”
Transmitter Data In
Transmitter Data In Bar
Transmitter ground.
Laser Bias Monitoring – Negative End
Laser Bias Monitoring – Positive End
(Bmon+ - Bmon-) = 10 Ω X laser bias current
Laser Power Monitoring -- Negative end
Laser Power Monitoring -- Positive end
(Pmon+ - Pmon-) = 200 Ω X monitor photdiode
current
Mounting Studs. Connect to Chassis Ground
RECOMMENDED CIRCUIT SCHEMATIC
Vcc3.3V
MICROSTRIP1
Tdis(LVTTL)
TD-
Z=50R
MICROSTRIP2
Bmon-
LVPECL
TD+
Z=5OR
Bmon+
150ohm
PmonPmon+
150ohm
VCC3.3V
20
19
18
17
16
15
14
13
12
11
1uH
Pmon+
PmonBmon+
BmonVeeTX
TDTD+
Tdis
VeeTX
VccTX
100nF
100nF
Vcc3.3V Vcc3.3V
130R
1
2
3
4
5
6
7
8
9
10
RX
PHY DEVICE
10uF
1uH
VpdR
VeeRX
VeeRX
NC
NC
VeeRX
VccRX
SD
RDRD+
TX
100nF
Vcc3.3V
10uF
RD+
200R
82R
MICROSTRIP3
VCCRX(3.3V)
RD-
Z=5OR
3K
Vpdr
LVPECL
130R
Z=50R
MICROSTRIP4
10nF
82R
1K
SD
TO LVPECL STAGE
Note: 1. TX input is terminated inside the module.
2. Veer and Veet are not internally connected to each other.
3. 50 Ω line pattern and component placements on TD+/TD- and RD+/RD- lines shall be symmetrical for better impedance
matching.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
12/1/2005 V3.0
Optoway
TRSL-5380W-CXX0
5
***********************************************************************************************************************************************************************
PACKAGE DIAGRAM
Units in mm
1) Standard Case
TRSL-5380W-CXX0G
2) Extended Case
TRSL-5380WE-CXX0G
Note: Specifications subject to change without notice.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
12/1/2005 V3.0