Composite Backshells 319-134 Composite EMI/RFI Ultra Low-Profile Shield Sock with Shrink Boot Porch and Self Locking Rotatable Coupling Finish Symbol (Table III) CONNECTOR DESIGNATOR: A F H MIL-DTL-38999 Series I, II MIL-DTL-38999 Series III and IV SELF-LOCKING STANDARD PROFILE Anti-Decoupling Device Product Series 319 - EMI/RFI Shield Sock Assemblies 319 ROTATABLE COUPLING B Custom Braid Length Specify In Inches (Omit for Std. 12" Length) Angle and Profile S - Straight T - 45° Elbow W - 90° Elbow F S Connector Designator F and H 134 Basic Part Number Shrink Sleeve or Boot Groove .962 Max Cable Entry (Table V) XO 16 04 Connector Dash Number (Table II) O Drain Hole Option (Omit for None) 12.00 Min Standard Shield Length. See Part Number Development for Optional Length Shrink Boot For S and B Angle Only Braid Option (Omit for Standard) (Table IV) E (Omit for None) B R - S 14 Split Ring Band Option Split Ring (687-749) and Band (600-057-1) supplied with R option (Omit for none) C F Standard Shield IAW 107-030 Nickel/Copper See Table III for Optional Material Optional Ø .125 Drain Holes 3 Minimum, Equally Spaced G Optional Ø .125 Drain Holes 3 Minimum, Equally Spaced D .065 .025 .07 Raised Configuration Manufacturers Option H Shrink Sleeve or Boot Lip E K 600-057-1 Band F G J Accomodates 600-057-1 Micro Band © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-16 Rev. 12 FEBRUARY 2013 Composite Backshells 319-134 Composite EMI/RFI Ultra Low-Profile Shield Sock with Shrink Boot Porch and Self Locking Rotatable Coupling TABLE II: SHELL SIZE (Continued Below) Connector Designator F Dash No. Shell Size 08 08 10 10 12 12 15 15 16 16 18 20 Connector Designator H B Dia Max L Max Dash No. Shell Size A Thread ISO metric B Dia Max L Max 7/15-28 UNEF .59 (15.0) .274 (7.0) 09 09 (A) M12 x 1.0 - 6H .65 (16.5) .264 (6.7) 9/16-24 UNEF .72 (18.3) .412 (10.5) 11 11 (B) M15 x 1.0 - 6H .77 (19.6) .390 (9.9) 11/16-24 UNEF .84 (21.3) .526 (13.4) 13 13 (C) M18 x 1.0 - 6H .89 (22.6) .504 (12.8) 13/16-20 UNEF .97 (24.6) .651 (16.5) 15 15 (D) M22 x 1.0 - 6H 1.03 (26.2) .630 (16.0) 15/16-20 UNEF 1.09 (27.7) .776 (19.7) 17 17 (E) M25 x 1.0 - 6H 1.15 (29.2) .756 (19.2) 18 1 1/16-18 UNEF 1.22 (31.0) .872 (22.1) 19 19 (F) M28 x 1.0 - 6H 1.28 (32.5) .843 (21.4) 20 1 3/16-18 UNEF 1.34 (34.0) 1.007 (25.6) 21 21 (G) M31 x 1.0 - 6H 1.41 (35.8) .969 (24.6) 22 22 1 5/16-18 UNEF .47 (37.3) 1.132 (28.8) 23 23 (H) M34 x 1.0 - 6H 1.53 (38.9) 1.091 (27.7) 24 24 1 7/16-18 UNEF 1.59 (40.4) 1.257 (31.9) 25 25 (J) M37 x 1.0 - 6H 1.66 (42.2) 1.217 (30.9) Connector Designator F Dash Shell No. Size A Thread Class 2A A B TABLE II: SHELL SIZE (Continued From Above) Connector Designator H Dash Shell No. Size C Max D Flats Max E ± .06 (1.5) F ± .09 (2.3) G Max H ± .03 (0.8) J K Available Entry Code See Table V and Note 4 08 08 09 09 (A) .86 (21.8) .75 (19.1) .72 (18.3) .87 (22.1) .63 (16.0) 1.042 (26.5) .304 (7.7) .160 (4.1) 04 10 10 11 11 (B) .98 (24.9) .88 (22.2) .75 (19.1) .93 (23.6) .66 (16.8) 1.107 (28.1) .432 (11.0) .174 (4.4) 05 12 12 13 13 (C) 1.16 (29.4) 1.00 (25.4) .75 (19.1) 1.00 (25.4) .72 (18.3) 1.174 (29.8) .546 (13.9) .195 (5.0) 07 15 15 15 15 (D) 1.28 (32.5) 1.13 (28.6) .76 (19.3) 1.03 (26.2) .83 (21.1) 1.241 (31.5) .670 (17.0) .315 (8.0) 09 16 16 17 17 (E) 1.41 (35.7) 1.25 (31.8) .78 (19.8) 1.05 (26.7) .91 (23.1) 1.305 (33.1) .796 (20.2) .385 (9.8) 05, 11 18 18 19 19 (F) 1.52 (38.5) 1.38 (39.9) .79 (20.1) 1.06 (26.9) .93 (23.6) 1.371 (34.8) .902 (22.9) .445 (11.3) 07, 13 20 20 21 21 (G) 1.64 (41.7) 1.50 (38.1) .82 (20.8) 1.09 (27.7) 1.04 (26.4) 1.438 (36.5) 1.027 (26.1) .525 (13.3) 09, 15 22 22 23 23 (H) 1.77 (44.9) 1.63 (41.3) .86 (21.8) 1.13 (28.7) 1.12 (28.4) 1.505 (38.2) 1.152 (29.3) .595 (15.1) 11, 16 24 24 25 25 (J) 1.89 (48.0) 1.75 (44.5) .89 (22.6) 1.16 (29.5) 1.18 (30.0) 1.572 (39.9) 1.276 (32.4) .655 (16.6) 07, 13, 17 TABLE III: FINISH TABLE IV: BRAID TYPE Symbol Finish Description Symbol Braid Type XM 2000 Hour Corrosion Resistant Electroless Nickel A 100% AmberStrand® XMT 2000 Hour Corrosion Resistant Ni-PTFE, NickelFluorocarbon Polymer. 1000 Hour GreyTM B 75%/25% AmberStrand® Blend XW 2000 Hour Corrosion Resistant Cadmium Olive Drab Over Electroless Nickel L 100% ArmorLite Standard Nickel/Copper 34awg T Tin/Copper 34awg NOTES 1. Assembly identified with manufacturer's name and part number, space permitting. 2. Glenair Series 600 Backshell Assembly Tools are recommended for assembly and installation. 3. 700-001S**-0 shrink boot supplied with S option. For S and T configurations only. 4. Entry codes are applicable for S and T configurations only. 5. Material/Finish: Clamp Body - High grade engineering thermoplastic/Table III. Coupling Nut - High grade engineering thermoplastic/Unplated. Anti-Rotation De vice - Corrosion resistant material. Shield - See part number development. © 2009 Glenair, Inc. TM CAGE Code 06324 D TABLE V: CABLE ENTRY Dash Number D ± .03 04 .25 (6.4) 05 .31 (7.9) 07 .44 (11.2) 09 .56 (14.2) 11 .68 (17.3) 13 .81 (20.6) 15 .94 (23.9) 16 1.00 (25.4) 17 1.16 (29.5) Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-17 Rev. 12 FEBRUARY 2013 C E F G