10458D 10 GHz High Power PIN Photodiode Receiver DATASHEET | NOVEMBER 2013 MICROWAVE The 10458 PIN microwave photodiode receiver incorporates a high-speed planar PIN photodiode with low-noise bias and monitor electronics. The unit installs in EMCORE’s System 10000 3 RU equipment rack providing a highly reliable, high power photodiode receiver. The receiver is well matched over the operating frequency band, thereby simplifying high-speed integration. Performance Highlights Applications Antenna Remoting Military Communications Phased Array Antennas Electronic Warfare (EW) Systems Delay Lines for Radar Calibration Parameter Min Typ Max Units Storage Temperature Operating Temperature -40 - +85 °C -10 25 +50 °C Responsivity 0.7 - - A/W Receiver Gain (1 GHz) -9.1 - - dB (A/W) Dark Current (25°C) - - 5 nA Max Current - - 10 mA Optical Input - - 11 dBm RF Return Loss 8 12 - dB 1280 - 1580 nm Optical Return Loss - - -40 dB Module DC Current (Pin 1) - - 200 mA Optical Wavelength Range Features Highly Reliable Planar Photodiode Technology High Power Capability Bandwidth Up to 10 GHz Good RF Matching, 12 dB Typical RF Characteristics Parameter Symbol Condition Min Bandwidth Impedence S21 Flatness Typ Max f3dB 10458D Z Resistively Matched SMA Connector - 50 MHz - 10 GHz Units 0.05 - 10 GHz - 50 - Ohm - 2 4 dB p-p Specified characteristics apply for the recommended operating conditions at beginning of life, 25°C unless noted otherwise. Typical S21 Data © 2013 EMCORE Corporation | REV 2013.11 +1 626-293-3400 [email protected] www.emcore.com Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice. 10458D 10 GHz High Power PIN Photodiode Receiver DATASHEET | NOVEMBER 2013 MICROWAVE Pinout Pin Number Description 1 +15 VDC 2 No Connection 3 No Connection 4 Ground 5 Ground 1 6 Photodiode Current Monitor 1 V / 1mA 71,2 Received Optical Power Alarm 8 1 No Connection 91 No Connection 1 1. Pins 5-9 can be monitored at the rear of the System 10000 chassis 2. Open collector alarm, external 1K pull-up required. Capable of sinking 20 mA Outline Information Ordering Information Model Number Description 10458D-SA Receiver 10 GHz, SMA, AC Coupled, SC/APC 10458D-FA Receiver 10 GHz, SMA, AC Coupled, FC/APC 10990A System 10000 Equipment Chassis, 3 RU 10901G-NA System 10000 Power Supply, US Power Cord 10901G-UK System 10000 Power Supply, UK Power Cord 10901G-EU System 10000 Power Supply, EU Power Cord © 2013 EMCORE Corporation | REV 2013.11 +1 626-293-3400 [email protected] www.emcore.com Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice.