Optoway TRSL-5120G 1 ********************************************************************************************************************************************************************** TRSL-5120G / TRSL-5120AG / TRSL-5120CG / TRSL-5120ACG 3.3V / 1310 nm / 622 Mbps RoHS Compliant SFF LC SINGLE-MODE TRANSCEIVER ********************************************************************************************************************************************************************* FEATURES DESCRIPTION l l l l l l l l l l l l l l The TRSL-5120G series single mode transceivers is small form factor, low power, high performance module for bi-directional serial optical data communications such as SONET OC-12 IR-1 / SDH STM-4 (S-4.1) and Fiber Channel. This module is designed for single mode fiber and operates at a nominal wavelength of 1310 nm. The transmitter section uses a multiple quantum well laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. A PECL logic interface simplifies interface to external circuitry. Duplex LC Single Mode Transceiver SONET OC-12 IR-1 / SDH STM-4 (S-4.1) Compliant Small Form Factor, RJ-45 size, 2X5 pin Package 1310 nm LD Transmitter LVPECL Signal Input / Output LVTTL Transmitter Disable Input LVPECL Signal Detect Output: TRSL-5120G LVTTL Signal Detect Output: TRSL-5120CG Single +3.3 V Power Supply RoHS Compliant 0 to 70oC Operating: TRSL-5120G -40 to 85oC Operating: TRSL-5120AG Wave Solderable and Aqueous Washable Class 1 Laser International Safety Standard IEC-60825 Compliant APPLICATIONS l ATM 622 Mbps Links l SONET/SDH Equipment Interconnect l Fiber Channel 533 Mb/s Links LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. ORDER INFORMATION P/No. TRSL-5120G TRSL-5120AG Bit Rate (Mb/s) 622 622 SONET /SDH IR-1/S-4.1 IR-1/S-4.1 Distance (km) 20 20 Wavelength Package (nm) 1310 2X5 LC 1310 2X5 LC Temp. TX Power RX Sens. RoHS (oC) (dBm) (dBm) Compliant 0 to 70 -8 to -14 -28 Yes -40 to 85 -8 to -14 -28 Yes Absolute Maximum Ratings Parameter Storage Temperature Operating Temperature Symbol Tstg Topr Soldering Temperature Power Supply Voltage Input Voltage --Vcc --- Output Current Iout Min -40 0 -40 Units o C o C 0 GND Max 85 70 85 260 4.5 Vcc 0 30 mA Min 3.13 0 -40 50 Typ 3.3 Max 3.47 70 85 o C V V Notes TRSL-5120G TRSL-5120AG 10 seconds on leads only Recommended Operating Conditions Parameter Power Supply Voltage Operating Temperature Symbol Vcc Topr Data Rate Power Supply Current Icc 622 180 240 Units / Notes V o C / TRSL-5120G o C / TRSL-5120AG Mb/s mA *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 12/1/2005 V2.0 Optoway TRSL-5120G 2 *********************************************************************************************************************************************************************** Transmitter Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3.47V) Parameter Optical Optical Transmit Power Output Center Wavelength Output Spectrum Width Extinction Ratio Output Eye Optical Rise Time Optical Fall Time Relative Intensity Noise Total Jitter Electrical Data Input Current – Low Data Input Current – High Differential Input Voltage Data Input Voltage – Low Data Input Voltage -- High Disable Input Voltage -- Low Disable Input Voltage -- High Shut Off Time for TxDis Symbol Min Typ Max Units Po -14 ---8 dBm 1274 1310 1356 nm λ ----2.5 nm ∆λ ER 8.2 ----dB Compliant with Bellcore GR-253-CORE and ITU recommendation G.957 tr 1.2 ns tf 1.2 ns RIN -120 dB/Hz TJ 0.55 ns IIL IIH VIH - VIL V IL - VCC V IH - VCC VTDIS,L VTDIS,H tDIS -350 350 300 -2.0 -1.1 0 Vcc – 1.3 -1.58 -0.74 0.5 Vcc 1 µA µA mV V V V V ms Notes 1 RMS (σ) 10% to 90% Values 10% to 90% Values 2 3 3 TX Output Enabled TX Ouput Disabled Notes: 1. Output power is power coupled into a 9/125 µm single mode fiber. 2. Measured with a 223-1 PRBS with 72 ones and 72 zeros. 3. These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs. Receiver Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V) Parameter Optical Sensitivity Maximum Input Power Signal Detect -- Asserted Signal Detect -- Deasserted Signal detect -- Hysteresis Wavelength of Operation Electrical Data Output Voltage – Low Data Output Voltage – High Signal Detect Output Voltage -- Low Signal Detect Output Voltage -- High Signal Detect Output Voltage -- Low Signal Detect Output Voltage -- High Symbol Min Typ Max Units Notes --Pin Pa Pd ---5 ---40 1.0 1100 --- -28 ---28 --- dBm dBm dBm dBm dB nm 1 V OL - VCC V OH - VCC V OL - VCC V OH - VCC VOL VOH -2.0 -1.1 -2.0 -1.1 2.0 --------- 1600 -1.58 -0.74 -1.58 -0.74 0.5 V V V V V V Transition: low to high Transition: high to low 2 2 TRSL-5120G TRSL-5120CG Notes: 1. Minimum sensitivity and saturation levels at BER=1E-10 for a 223-1 PRBS with 72 ones and 72 zeros. 2. These outputs are compatible with 10K, 10KH and 100K ECL and PECL outputs. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 12/1/2005 V2.0 Optoway TRSL-5120G 3 *********************************************************************************************************************************************************************** CONNECTION DIAGRAM PIN 1 2 3 4 5 6 7 8 Symbol VEEr VCC r SD RD− RD+ VCC t VEEt TDis 9 10 MS TD+ TDMS Notes Directly connect this pin to the receiver ground plane +3.3V dc power for the receiver section Active high on this indicates a received optical signal. Receiver Dataout Bar. See recommended circuit schematic Receiver Dataout. See recommended circuit schematic +3.3V dc power for the transmitter section Directly connect this plan to the transmitter ground plane Transmitter Disable. Connect this pin to +3.3V TTL logic “1” to disable module To enable module connect to TTL logic low “0” Transmitter Data In. See recommended circuit schematic Transmitter Data In Bar. See recommended circuit schematic Mounting Studs. Connect to Chassis Ground RECOMMENDED CIRCUIT SCHEMATIC Vcc3.3V MICROSTRIP1 TD- Z=50R MICROSTRIP2 LVPECL TD+ Z=5OR 150ohm 150ohm TDTD+ TDis Veet Vcct 10 9 8 7 6 TDis(LVTTL) Vcc3.3V 1uH 10nF 10nF 10uF 10uF 1uH PHY DEVICE Veer Vccr SD RDRD+ Vcc3.3V Vcc3.3V 130R 1 2 3 4 5 SFF2X5 10nF Vcc3.3V 10uF RD+ MICROSTRIP3 Z=50R MICROSTRIP4 82R LVPECL 130R RD- Z=5OR SD 1K TO LVPECL STAGE 82R Note: 1. 1000ΩSD Output pull-down resistor required for TRSL-5120G / TRSL-5120AG (LVPECL SD Output) 2. No pull-down resistor required for TRSL-5120CG / TRSL-5120ACG (LVTTL SD Output) 3. Veer and Veet are not internally connected to each other. 4. 50 Ω line pattern and component placements on TD+/TD- and RD+/RD- lines shall be symmetrical for better impedance matching. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 12/1/2005 V2.0 Optoway TRSL-5120G 4 *********************************************************************************************************************************************************************** PACKAGE DIAGRAM Units in mm 1) Standard Case TRSL-5120G / TRSL-5120AG / TRSL-5120CG / TRSL-5120ACG 2) Extended Case TRSL-5120EG / TRSL-5120AEG / TRSL-5120CEG / TRSL-5120ACEG Note: Specifications subject to change without notice. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 12/1/2005 V2.0