CVPD-970 Model 9×14 mm SMD, 3.3V, LVPECL Frequency Range: 622.080 MHz to 670 MHz Frequency Stability: Temperature Range: (Option X) Storage: ±25ppm 0°C to 70°C -40°C to 85°C -45°C to 90°C Input Voltage: Control Voltage: Input Current: 3.3V ±0.3V 1.65V ±1.65V 80mA Max Output: Symmetry: Rise/Fall Time: Pullability APR: Linearity: Load: Terminated to Vdd-2V Logic "1" Level: Logic "0" Level: Disable Time: Start-up Time: Differential LVPECL 49/51% Typical, 45/55% Max 0.4ns Max @ 20% to 80% Vcc ±50ppm Min ±10% Max into 50 ohms Vcc-0.96V Min, Vcc-0.81V Max Vcc-1.85V Min, Vcc-1.65V Max 100ns Max 2ms Typical, 10ms Max Modulation BW: Sub-harmonics: >10kHz @ -3dB -40dBc Period Jitter: Phase Jitter: <5ps RMS (1-sigma) Max <1ps RMS (1-sigma) Max, <1ps RMS (1-sigma) Max, (20,000 periods) 12kHz~20MHz 50kHz~80MHz Phase Noise Typical: 100Hz 1kHz 10kHz 100kHz -80 dBc/Hz -108 dBc/Hz -132 dBc/Hz -140 dBc/Hz Aging: <3ppm 1st year, <2ppm every year thereafter Applications: 10 Gigabit Ethernet OC48: Forward Error Correction Broadband Networks SONET/SDH/DWD ATM Network/switch Telecom Designed using FR5 PCB & HFF crystal technology to provide a Low Noise, Low Jitter Voltage Controlled Clock Oscillator solution at a competitive price. TD-030607 Rev. F Specifications subject to change without notice. Page 1 of 2 CRYSTEK CORPORATION 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com CVPD-970 Model 9×14 mm SMD, 3.3V, LVPECL 0.560 (14.2) Crystek Part Number Guide CVPD - 970 - X - 622.080 #1 #1 #2 #3 #4 #2 #3 0.360 (9.14) #4 CRYSTEK P/N Frequency Date Code Crystek 9×14 SMD PECL VCXO Model 970 = High Frequency 3.3V Temp. Range: Blank = 0/70°C, X = -40/85°C Frequency in MHz: 3 or 6 decimal places 0.100 (2.54) 0.560 (14.2) Example: CVPD-970X-622.080 = 3.3V, -40/85°C, 622.080 MHz 0.040 (1.01) 1 0.210 (5.3) 2 6 5 Standard Frequencies MHz 622.080 625.000 644.531300 RECOMMENDED REFLOW SOLDERING PROFILE TEMPERATURE Ramp-Up 3°C/Sec Max. Critical Temperature Zone Ramp-Down 6°C/Sec. 217°C 200°C 150°C Preheat 180 Secs. Max. 8 Minutes Max. 0.070 (1.77) 4 0.200 (5.08) 666.514300 669.128100 669.326500 260°C 3 90 Secs. Max. 260°C for 10 Secs. Max. PIN Function 1 2 3 4 5 6 Vcont E/D GND OUT COUT Vdd SUGGESTED PAD LAYOUT via to ground 0.01µF 0.050 (1.27) 0.280 (7.11) 0.090 (2.28) Enable/Disable Function Pin 2 Output pin Open "0" level Vcc-1.620V Max "1" level Vcc-1.025V Min Active Active Disabled 0.200 (5.08) Disabled State: Pin 4 will assume a fixed level of logic "0" Pin 5 will assume a fixed level of logic "1" NOTE: Reflow Profile with 240°C peak also acceptable. Mechanical: Shock: Solderability: Vibration: Solvent Resistance: Resistance to Soldering Heat: MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2003 MIL-STD-883, Method 2007, Condition A MIL-STD-202, Method 215 MIL-STD-202, Method 210, Condition I or J Environmental: Thermal Shock: Moisture Resistance: MIL-STD-883, Method 1011, Condition A MIL-STD-883, Method 1004 Packaging: Tape/Reel: 100ea, 250ea, 500ea 24mm Tape Specifications subject to change without notice. CRYSTEK CORPORATION TD-030607 Rev. F Page 2 of 2 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com