OPTOWAY TRSL

Optoway
TRSL-3150G
1
***********************************************************************************************************************************************************************
TRSL-3150G / TRSL-3150AG
3.3V / 1310 nm / 155 Mbps RoHS Compliant SFF LC SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l
l
l
l
l
l
l
l
l
l
l
l
l
l
The TRSL-3150G series single mode transceivers is small
form factor, low power, high performance module for
bi-directional serial optical data communications such as
SONET OC-3 LR-1 / SDH STM-1 (L-1.1) and Fast
Ethernet. This module is designed for single mode fiber and
operates at a nominal wavelength of 1310 nm. The
transmitter section uses a multiple quantum well laser
and is a class 1 laser compliant according to International
Safety Standard IEC-60825. The receiver section uses an
integrated InGaAs detector preamplifier (IDP) mounted in
an optical header and a limiting post-amplifier IC. A PECL
logic interface simplifies interface to external circuitry.
Duplex LC Single Mode Transceiver
SONET OC-3 LR-1 / SDH STM-1 (L-1.1) Compliant
Small Form Factor 2X5 pin Package
1310 nm LD Transmitter
Distance up to 50 km
LVPECL Signal Input / Output
LVTTL Transmitter Disable Input
LVPECL Signal Detect Output
Single +3.3 V Power Supply
RoHS Compliant
0 to 70oC Operating: TRSL-3150G
-40 to 85oC Operating: TRSL-3150AG
Wave Solderable and Aqueous Washable
Class 1 Laser International Safety Standard IEC-60825
Compliant
APPLICATIONS
l ATM 155 Mbps Links
l SONET/SDH Equipment Interconnect
l Fast Ethernet 100 Mb/s Links
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug
ORDER INFORMATION
P/No.
TRSL-3150G
TRSL-3150AG
Bit Rate
(Mb/s)
125 / 155
125 / 155
SDH
/SONET
LR-1/L-1.1
LR-1/L-1.1
Distance Wavelength Package
(km)
(nm)
50
1310
2X5 LC
50
1310
2X5 LC
Temp. TX Power RX Sens.
RoHS
(oC)
(dBm)
(dBm)
Compliant
0 to 70
0 to -5
-34
Yes
-40 to 85
0 to -5
-34
Yes
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Symbol
Tstg
Topr
Soldering Temperature
Power Supply Voltage
Input Voltage
--Vcc
---
Output Current
Iout
Min
-40
0
-40
Units
o
C
o
C
0
GND
Max
85
70
85
260
4.5
Vcc
0
30
mA
Min
3.13
0
-40
Typ
3.3
Max
3.47
70
85
170
240
o
C
V
V
Notes
TRSL-3150G
TRSL-3150AG
10 seconds on leads only
Recommended Operating Conditions
Parameter
Power Supply Voltage
Operating Temperature
Symbol
Vcc
Topr
Data Rate
Power Supply Current
Icc
125 / 155
180
Units / Notes
V
o
C / TRSL-3150G
o
C / TRSL-3150AG
Mb/s
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
12/1/2005 V2.0
Optoway
TRSL-3150G
2
***********************************************************************************************************************************************************************
Transmitter Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3. 47V)
Parameter
Optical
Optical Transmit Power
Output Center Wavelength
Output Spectrum Width
Extinction Ratio
Output Eye
Optical Rise Time
Optical Fall Time
Relative Intensity Noise
Total Jitter
Electrical
Data Input Current – Low
Data Input Current – High
Differential Input Voltage
Data Input Voltage – Low
Data Input Voltage -- High
Disable Input Voltage -- Low
Disable Input Voltage -- High
Shut Off Time for TxDis
Symbol
Min
Typ
Max
Units
Po
-5
--0
dBm
1270
1310
1350
nm
λ
----3
nm
∆λ
ER
10
----dB
Compliant with Bellcore GR-253-CORE and ITU recommendation G.957
tr
2
ns
tf
2
ns
RIN
-116
dB/Hz
TJ
1
ns
IIL
IIH
VIH - VIL
V IL - VCC
V IH - VCC
VTDIS,L
VTDIS,H
tDIS
-350
350
300
-2.0
-1.1
0
Vcc – 1.3
-1.58
-0.74
0.5
Vcc
1
µA
µA
mV
V
V
V
V
ms
Notes
1
RMS (σ)
10% to 90% Values
10% to 90% Values
2
3
3
TX Output Enabled
TX Ouput Disabled
Notes: 1. Output power is power coupled into a 9/125 µm single mode fiber.
2. Measured with a 223-1 PRBS with 72 ones and 72 zeros.
3. These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs.
Receiver Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V)
Parameter
Optical
Sensitivity
Maximum Input Power
Signal Detect -- Asserted
Signal Detect -- Deasserted
Signal detect -- Hysteresis
Wavelength of Operation
Electrical
Data Output Voltage – Low
Data Output Voltage – High
Signal Detect Output Voltage -- Low
Signal Detect Output Voltage -- High
Symbol
Min
Typ
Max
Units
Notes
--Pin
Pa
Pd
---5
---47
1.0
1100
---
-34
---34
---
1
1600
dBm
dBm
dBm
dBm
dB
nm
-1.58
-0.74
-1.58
-0.74
V
V
V
V
V OL - VCC
V OH - VCC
V OL - VCC
V OH - VCC
-2.0
-1.1
-2.0
-1.1
---------
Transition: low to high
Transition: high to low
2
2
Notes: 1. Minimum sensitivity and saturation levels at BER=1E-10 for a 223-1 PRBS with 72 ones and 72 zeros.
2. These outputs are compatible with 10K, 10KH and 100K ECL and PECL outputs.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
12/1/2005 V2.0
Optoway
TRSL-3150G
3
***********************************************************************************************************************************************************************
CONNECTION DIAGRAM
PIN
1
2
3
4
5
6
7
8
Symbol
VEEr
VCC r
SD
RD−
RD+
VCC t
VEEt
TDis
9
10
MS
TD+
TDMS
Notes
Directly connect this pin to the receiver ground plane
+3.3V dc power for the receiver section
Active high on this indicates a received optical signal.
Receiver Dataout Bar. See recommended circuit schematic
Receiver Dataout. See recommended circuit schematic
+3.3V dc power for the transmitter section
Directly connect this plan to the transmitter ground plane
Transmitter Disable. Connect this pin to +3.3V TTL logic “1” to disable module
To enable module connect to TTL logic low “0”
Transmitter Data In. See recommended circuit schematic
Transmitter Data In Bar. See recommended circuit schematic
Mounting Studs. Connect to Chassis Ground
RECOMMENDED CIRCUIT SCHEMATIC
Vcc3.3V
MICROSTRIP1
TD-
Z=50R
MICROSTRIP2
LVPECL
TD+
Z=5OR
150ohm
150ohm
TDTD+
TDis
Veet
Vcct
10
9
8
7
6
TDis(LVTTL)
Vcc3.3V
1uH
10nF
10nF 10uF
10uF
1uH
PHY DEVICE
Veer
Vccr
SD
RDRD+
Vcc3.3V Vcc3.3V
SFF2X5
1
2
3
4
5
130R
10nF
Vcc3.3V
10uF
RD+
MICROSTRIP3
Z=50R
MICROSTRIP4
82R
LVPECL
130R
RD-
Z=5OR
SD
1K
TO LVPECL STAGE
82R
Note: 1. 1000ΩSD Output pull-down resistor required for TRSL-3150G / TRSL-3150AG (LVPECL SD Output)
3. Veer and Veet are not internally connected to each other.
4. 50 Ω line pattern and component placements on TD+/TD- and RD+/RD- lines shall be symmetrical for
better impedance matching.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
12/1/2005 V2.0
Optoway
TRSL-3150G
4
***********************************************************************************************************************************************************************
PACKAGE DIAGRAM
Units in mm
1) Standard Case
TRSL-3150G / TRSL-3150AG
2) Extended Case
TRSL-3150EG / TRSL-3150AEG
Note: Specifications subject to change without notice.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
12/1/2005 V2.0