System Sensor SP2C Series

System Sensor
SP2C Series
Description
Ceiling Mount Speakers/Strobe
Notification Appliances
The System Sensor SP2C Series speaker/strobes are
designed to meet the demands of fire protection and life
safety applications. Housed in rugged plastic, these speakers are made for ceiling mounting and are Listed for indoor
use.
The speakers are available for 25 or 70.7 nominal VRMS
applications and are designed for high dB output with uniform frequency response across the 400-4,000 Hz range.
They contain taps selectable from 0.25 to 2.0 watts and a
blocking capacitor for D.C. supervision. All models have
separate screw terminals for speakers and strobes.
The System Sensor Model SP2C speaker/strobes may be
mounted either surface or flush. The unit can be flush
mounted on a 4-inch square electrical box, 1 1/2-inches
deep, with a Model BBSCW accessory skirt for surface
mount.
SP2C
Features
• Listed under UL Standards 1480 and 1971.
• High intensity strobe option meets or exceeds ADA
The strobes operate on 24 VDC, contain xenon flash tubes
and are Listed for indoor use. Their design enables them to
meet the requirements of UL STD 1971 at low power consumption. They have a nominal flash rate of one flash per
second. Units are intended for non-sleeping areas/ADA
applications (15, 15-75, 30, 75, 95, or 115 cd). For sleeping areas, 177 cd units are available.
requirements.
• Standard 4-inch square mounting.
• Low profile ceiling mount.
• Optional synchronization module.
• High dBA output.
• Selectable taps.
• 25 or 70.7 Volt operation.
The strobes are visible from all sides of the clear lens. The
word FIRE is silk-screened in red on a white housing and
vice versa.
• Strobes equipped with Xenon flash tubes.
The strobes may be used in conjunction with the MDL synchronization module which can synchronize two (2) Style Y
(Class B) or one (1) Style Z (Class A) circuit. It can also
generate an ANSI S3.41 temporal pattern. The module
mounts in a 4 11/16” square electrical box, 2 1/8” deep.
An ISO 9000-2000 Company
SIGNALING
MEA
S4048
Approved
63-00-E 7300-1653:130
7320-1653:143
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472-1653 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118
Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use.
©2006 Honeywell International Inc. All rights reserved.
www.gamewell-fci.com
9020-0589 Rev. D page 1 of 2
Signal Coverage
Most codes require that the notification appliances be intelligible and audible in all occupied areas. This may mean
that additional loudspeaker appliances may be necessary
to compensate for sound absorbing construction techniques. Verify recommended minimum requirements with
applicable enforcement agencies.
Specifications
Speaker
Input voltage:
Frequency range:
Power:
Operating temperature:
Size:
25 or 70.7 volts (nominal)
400-4000 Hz
1/4, 1/2, 1 and 2 watts
32° to 120° F (0° to 49° C)
(Ceiling mount):
6.8” diameter x 2.4” H
(17 diameter x 6.1 H cm)
(Wall mount):
4 7/8" x 8 1/4" x 2 1/4"
(12.3 x 21 x 6.1 cm)
Ordering Information
Part Number Description
134-90205
134-90206
134-90207
134-90209
134-90210
134-50033
134-50032
SP2C2415
Speaker/strobe, white, 15 cd
SP2C241575 Speaker/strobe, white,
15/75 cd
SP2C2430
Speaker/strobe, white, 30 cd
SP2C2475
Speaker/strobe, white, 75 cd
SP2C2495
Speaker/strobe, white, 95 cd
SP2C24115 Speaker/strobe, white,
115 cd
SP2C24177 Speaker/strobe, white,
177 cd
Accessories
190-90019
MDL
190-90020
MDLW
139-90035
BBSCW
Synchronization Module,
24 VDC, red
Synchronization Module,
24 VDC, white
Back box skirt, white
Sound Levels
Transformer power tap:
2W
UL reverberant (dBA @ 10 ft.) 84
Anechoic (dBA @ 10 ft.)
87
1W
81
84
1/2W
78
81
1/4W
75
78
Strobe
Operating voltage range:
(with MDL module)
Flash rate:
16 to 33 volts DC*
17 to 33 volts DC*
1 flash / second
Operating current (24 VDC)
15 cd
15/75 cd
30 cd
75 cd
95 cd
115 cd
177 cd
MDL Sync. Module
FWR Max.
0.068 amp.
0.077 amp.
0.107 amp.
0.197 amp.
0.239 amp.
0.298 amp.
0.399 amp.
0.015 amp.
(avg.)
0.262 amp.
(in-rush)
0.037 amp.
(peak)
DC Max.
0.064 amp.
0.078 amp.
0.113 amp.
0.205 amp.
0.274 amp.
0.325 amp.
0.489 amp.
0.011 amp.
(avg.)
0.198 amp.
(in-rush)
0.035 amp.
(peak)
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472-1653 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118
www.gamewell-fci.com
9020-0589 Rev. D page 2 of 2