System Sensor, 5600 Series Description Mechanical Heat Detectors The System Sensor® 5600 Series mechanical heat detectors offer a low-cost solution for property protection against fire and protection in conditions where the non-life safety installations may not require smoke detectors. The 5600 Series offers both single and dual circuit models. Each model is available with low or high temperature ratings, and fixed temperature or rate-of-rise activation. The rate-of-rise element is restorable to accommodate field testing of the unit. The detectors mount readily on single gang or octagonal backboxes. They can also mount on a four inch (10.16 cm) square box with the support of a square to round plaster ring. The mounting bracket is reversible to allow for flush and surface mount installations. The 5600 units provide clear markings readily visible on the unit to ensure the proper application. Alphanumeric characters identify the type of detector and temperature rating, both in Fahrenheit and Celsius. Fixed temperature models are labeled “FX,” while the combination units are marked “FX/ROR”. The detector also features a positive indication of actuation of the fixed temperature portion. The collector disc drops from the unit making it readily identifiable. Electrical Specifications Operating Voltage Contact Ratings 6 -125 VAC 6-28 VDC 125 VDC 3A 1A 0.3A 5600 Series Features • Offers an attractive low silhouette design. • Has multiple configurations available. • Uses single and dual circuit models. • Has a fixed temperature and combination, or a fixed temperature/rate-of-rise activation. • Displays readily visible alphanumeric markings. • Includes a standard 3.5” (8.8 cm) or a 4” (10.16 cm) octagonal mounting. • Installed as a single gang or a standard 4” (10.16 cm) square mounting with the support of a plaster ring. SIGNALING FM MEA Approved FDNY: S2101 3016008 COA # 199-33-4 7270-1653:0167 ® System Sensor is a registered trademark of Honeywell International Inc. APPROVED GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use. www.gamewell-fci.com 9020-0590 Rev. D page 1 of 2 ©2013 by Honeywell International Inc. All rights reserved. Ordering Information System Sensor, 5600 Series Part Number Circuit Temperature Rating Rating Max. UL Spacing - 10 Foot Ceiling* 5601 Single FT + ROR 50 ft. x 50 ft. (15.24 m x 15.2 m) 135°F (57C) 5602 Single 194°F (90°C) FT + ROR 50 ft. x 50 ft. (15.24 m x 15.2 m) 5603 Single 135°F (57°C) FT only 25 ft. x 25 ft. (7.62 m x 7.62 m) 5604 Single 194°F (90°C) FT only 25 ft. x 25 ft. (7.62 m x 7.62 m) 5621 Dual 135°F (57°C) FT + ROR 50 ft. x 50 ft. (15.24 m x 15.2 m) 5622 Dual 194°F (90°C) FT + ROR 50 ft. x 50 ft. (15.24 m x 15.2 m) 5623 Dual FT only 25 ft. x 25 ft. (7.62 m x 7.62 m) 135F (57C) 5624 Dual FT only 25 ft. x 25 ft. (7.62 m x 7.62 m) 194F (90C) *Note: Refer to NFPA 72 for guidelines for spacing reductions when ceiling heights exceed 10 feet. GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 9020-0590 Rev. D page 2 of 2 www.gamewell-fci.com