FM Series Rixson FireMark Electromagnetic Door Release Description The Rixson Firemark FM Series electromagnetic door releases are hold fire and smoke barrier doors that do not open until released by a remote smoke detector switch, fire alarm control or sprinkler system. In the event of a power failure, the doors are released to close automatically, but the doors may be opened or closed manually at any time. The door holders have a sprayed aluminum finish. All models feature a “multi-voltage” design, allowing them to operate on 12 VDC, 24 VAC/DC, or 120 VAC, thus simplifying both the installation and the inventory. Ordering Information 140-90000 140-90001 140-90002 140-90003 140-90004 140-90005 Description FM - 996 Features Power Requirements Voltage Current .040 amp. 12 VDC .020 amp. 24 VAC/DC .020 amp. 120 VAC Part Number FM - 998 • Fail-safe operation • Offers approximately 35 lbs. (15.9 kg) capacity of holding power • Positive release button initiate (Closing motion when the electromagnet is de-energized) Total Projection from the Wall FM-980 floor mount N/A FM-981 floor mount, N/A double doors FM-990 low profile 1 7/8 in. (4.9 cm) mount FM-996 surface 4.12 in. (10.05 cm) mount FF-997 recessed 2.6 in. (5.35 cm) mount FM-998 recessed, 2.6 in. (5.35 cm) concealed wiring An ISO 9000-2000 Com pany SIGNALING NYC BS&A Approved R4869 287-77-SA 3550-0047:001 GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use. www.gamewell-fci.com 9020-0045 Rev. E1 page 1 of 1 ©2009 by Honeywell International Inc. All rights reserved.