Butt Contact Pushbutton Switches Series 30 and 46 Snap-in Panel Mount FEATURES •Sleek Black Matte Bezel •Convenient Snap-In Front Mount •Choice of 6 Button Colors •SPST, SPDT or DPDT Circuitry •Alternate Action, Positive Feel and Overtravel Versions •Printed Button Option Dimensions in inches (and millimeters) DIM.ASEECHART –.015(0,38) .485(12,32)SQ. .063(1,60) Pushbutton Switches .800 (20,32) SQ. Hex nut for 30-017-A IS 9/16" (14,29) across flats and .094 (2,38) thick. .527(13,39) DIM.B SEECHART –.040(1,02) .600(15,24) LABEL* For bottom views and terminal markings, see Series 30 and 46 switches without bezels. .180(4,57) TYP. .738(18,75) *PARTNUMBER ANDE.I.A.DATE CODELABEL 1.016(25,81)REF. Tolerances are ± .010 (0,25) unless otherwise specified. CIRCUITRY n.C. Switches have momentary action unless otherwise indicated in the chart below. C1 n.C. n.O. n.C. C. n.O. n.C. n.O. SPdt - BBM n.C. C. n.O. n.C. C2 C. n.O. SPdt MBB n.O. dPdt BBM C. dPdt MBB Additional Dimensions and Part Numbers Dim. A:Dim. B: Circuitry and TotalActuating Button Height Behind Panel FeaturesTravel Force (± .015) Length (± .040) Butt Contact Switches - Series 30 SPST-N.O. .205 (5,21) 1.119 (28,42) .062 ± .010 (1,57 ± 0,25) 10 ± 4 oz. SPST-N.O., Overtravel .205 (5,21) 1.204 (30,58) .125 ± .020 (3,18 ± 0,51) 8 ± 4 oz. SPST-N.O., Overtravel & Positive Feel Adjustable** Adjustable** .156 ± .015 (3,96 ± 0,38) 18 ± 4 oz. SPST-N.O., Economical .205 (5,21) 1.119 (28,42) .062 ± .010 (1,57 ± 0,25) 10 ± 4 oz. SPST-N.C. .205 (5,21) 1.132 (28,75) .065 ± .015 (1,65 ± 0,38) 8 ± 4 oz. 30-001-A-* 30-015-A-* 30-017-A-* 30-601-A-* 30-002-A-* Wiping Contact Switches - Series 46 SPDT, BBM SPDT, MBB SPDT, BBM, Alternate Action DPDT, BBM DPDT, MBB DPDT, BBM, Alternate Action 46-102-A-* 46-111-A-* 46-502-A-* 46-200-A-* 46-201-A-* 46-402-A-* .205 (5,21) .205 (5,21) .293 (7,44) .205 (5,21) .205 (5,21) .293 (7,44) *Partial part number, complete part number by adding a dash for button color: white -01; red -03; green -04; blue -05; yellow -06 or black -07, see Ordering Information. Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 1.417 (35,99) 1.417 (35,99) 1.448 (36,78) 1.448 (36,78) 1.448 (36,78) 1.448 (36,78) .180 (4,57) min. .180 (4,57) min. .180 (4,57) min. .180 (4,57) min. .180 (4,57) min. .180 (4,57) min. 1.1 ± .25 lbs. 1.1 ± .25 lbs. 1.5 ± .25 lbs. 2.2 ± .5 lbs. 2.2 ± .5 lbs. 1.8 ± .5 lbs. Partial Part No.* **Adjustable from Dim. A .170 (4,32) minimum, Dim. B 1.285 (32,64) maximum to Dim. A .290 (7,37) maximum, Dim. B 1.165 (29,59) minimum with hex nut below bezel. 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com Butt Contact Pushbutton Switches SERIES 30 and 46 Decorator Line FEATURES •Attractive Front Panel Bezels (6 choices) •Space-Saving: Only 5/8" Diameter (SPST & SPDT) and 3/4" Diameter (DPDT) Round Bezels •SPST with Option of Positive Feel •SPDT, DPDT with Momentary Contact or Alternate Action •Sturdy Metal Sleeve or Bushing and Nut Provide Secure Mounting •UL Recognized Version DIMENSIONS in inches (and millimeters) SPDT–Break Before Make DPDT–Break Before Make 46-05-05-502-* 46-05-07-502-* 46-05-08-502-* (UL)** 46-05-09-502-* D E F DIMA ±.020 (0,51) (SEECHART) LABEL* G CL CL .100±.005 (2,54±0,13) 1/2-32UN-2A THREAD INSULATING BARRIER G .187–.015 (4,75–0,38) *PARTNUMBER ANDE.I.A.DATE CODELABEL Terminals are marked on switch. Partial Part No. Momentary 30-05-01-502-* Pos. Feel 30-05-04-502-* Dim. A Feature .710 (18,03) .910 (23,11) Partial Part No. 5/8-32UN-2A THREAD INSULATING BARRIER G .187–.015 (4,75–0,38) *PARTNUMBER ANDE.I.A.DATE CODELABEL .555–.005 (14,10–0,13) ACROSSFLATS C NC C .430–.005 (10,92–0,13) ACROSSFLATS LABEL* NO NC NO .430±.005 (10,92±0,13) ACROSSFLATS *PARTNUMBER ANDE.I.A.DATE CODELABEL Feature .186 (4,72) REF. 1/2-32UN-2A THREAD LABEL* B=.375–.010 (9,35–0,25) DIA. C=.750–.005 (19,05–0,13) DIA. D=.255–.032 (6,48–0,81) F=SEECHART –.015(0,38) E=.093–.010 (2,36–0,25) G=.150–.010 (3,81–0,25) C B=.375–.010 (9,53–0,25) D DIA. C=.625–.005 E (15,88–0,13) DIA. F D=.255–.032 (6,48–0,81) E=.093–.010 DIMA (2,36–0,25) –.015 F=.355–.015 (0,38) (9,02–0,38) (SEECHART) G=.150–.010 (3,81–0,25) NO C B NC B=.375±.010 (9,53±0,25) DIA. D C=.625±.005 (15,88±0,13) E DIA. F D=.255±.032 (6,48±0,81) E=.093±.010 DIMA (2,36±0,25) –.015 F=.355±.015 (0,38) (9,02±0,38) (SEECHART) G=.220±.025 (5,59±0,64) C B B C Terminals are marked on switch. Dim. A Partial Part No. Feature Momentary 46-05-05-502-* .992 (25,20) Alt. Action 46-05-07-502-* 1.278 (32,46) Momentary Alt. Action 46-05-08-502-* 46-05-09-502-* Dim. A Dim. F 1.001 (25,43) .314 (7,98) 1.130 (28,70) .355 (9,02) CIRCUITRY n.C. C1 n.C. n.O. C. n.C. n.O. SPSt n.O. C2 SPdt - BBM n.O. dPdt BBM Recommended panel cutout and MOUNTING HArdware SPSt and SPdt VerSiOn .440(11,17)MIN. ACROSSFLATS dPdt VerSiOn .565(14,35)MIN. ACROSSFLATS .516(13,10) MIN.DIA. Note: All switches fit panels up to .250 (6,35) thick, except 4605-08-502 which fits panels up to .187 (4,75) thick. Front and back panel access required for installation. .641(16,28) MIN.DIA. Mounting Hardware For 46-05-08-502 & 46-05-09-502: One internal tooth lockwasher One knurled ring nut .765 ± .010 (19,43 ± 0,25) Dia. .094 ± .010 (2,39 ± 0,25) Thk. For SPST & SPDT switches One internal tooth lockwasher One knurled ring nut .640 ± .010 (16,26 ± 0,25) Dia. .094 ± .010 (2,39 ± 0,25) Thk. *Partial part number; complete part number by adding a dash for button color: white -01; red -03; green -04; blue -05; yellow -06 or black -07, see Ordering Information. ** Contact Grayhill for part number. Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com Pushbutton Switches SPST–Normally Open 30-05-01-502-* 30-05-04-502-* Butt Contact Pushbutton Switches SERIES 30 and 46 Decorator Line FEATURES •Attractive Front Panel Bezels (6 choices) •Space-Saving: Only 11/16" Square •SPST with Option of Positive Feel •SPDT, DPDT with Momentary Contact or Alternate Action •Sturdy Metal Sleeve or Bushing and Nut Provide Secure Mounting DIMENSIONS in inches (and millimeters) SPDT–Break Before Make DPDT–Break Before Make 30-01-01-500-* 30-01-04-500-* 46-01-05-500-* 46-01-07-500-* 46-01-08-500-* 46-01-09-500-* .281–.032 (7,14–0,81) .255–.032 (6,48–0,81) .255–.032 (6,48–0,81) .093–.005 (2,36–0,13) .590–.003 (14.99–0,08) SQUARE WILLFIT PANEL .020(0,51) MIN.TO .125(3,18) MAX. DIM.A –.015(0,38) SEECHART .220–.025 (5,59–0,64) LABEL* *PARTNUMBER ANDE.I.A.DATE CODELABEL .093–.010 (2,36–0,25) .093–.005 (2,36–0,13) .590–.003 (14.99–0,08) SQUARE WILLFIT PANEL .020(0,51) MIN.TO .125(3,18) MAX. 1/2-32UN-2A THREAD LABEL* DIM.A –.015(0,38) SEECHART 1/2-32UN-2A THREAD .150–.010 (3,81–0,25) .100–.005 (2,54–0,13) *PARTNUMBER ANDE.I.A.DATE CODELABEL .187–.015 (4,75–,0,38) NO INSULATING BARRIER C NC .605(15,37) SQUAREMAX. 1.194 –.031 (30,33 –0,79) .187–.015 (4,75–0,38) INSULATINGBARRIER WILLFITPANEL .010(0,25)MIN. TO.218(5,54)MAX. .150 –.010 (3,81 –0,25) E.I.A.DATE CODELABEL MOUNTINGSLEEVE Terminals are marked on switch. Terminals are marked on switch. Partial Part No. Dim. A Feature Momentary 30-01-01-500-* .880 (22,35) Pos. Feel 30-01-04-500-* 1.037 (26,34) Partial Part No. Dim. A C Feature NO NC Momentary 46-01-05-500-* 1.174 (29,82) Alt. Action 46-01-07-500-* 1.264 (32,11) NC C Pushbutton Switches SPST–Normally Open NO Partial Part No. Feature Momentary 46-01-08-500-* Alt. Action 46-01-09-500-* CIRCUITRY n.C. C1 n.C. n.O. C. n.C. n.O. SPSt n.O. C2 SPdt - BBM n.O. dPdt BBM FRONT VIEWS AND MOUNTING .485±.010 (12,32±0,25) .687 (17,45) MAX. RECOMMENDEDPANELCUTOUT FORSQUAREBEZELSWITCHES .610±.004 (15,49±0,02)Sq. SINGLE .031(0,79) MAX.RADIUS .610±.004 (15,49±0,02) WideSlot STACKED Note:Allswitchesfitpanelsupto.250(6,35)thick. Frontandbackpanelaccessrequiredforinstallation. Mounting Hardware For 46-01-08-500 & 46-01-09-500 (See drawing above–mounting hardware shipped loose.) For SPST & SPDT switches One internal tooth lockwasher One knurled ring nut .640 ± .010 (16,26 ± 0,25) DIA. .094 ± .010 (2,39 ± 0,25) Thk. *Partial part number; complete part number by adding a dash for button color: white -01; red -03; green -04; blue -05; yellow -06 or black -07, see Ordering Information. Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com Butt Contact Pushbutton Switches RATINGS Specifications Material and Finishes Electrical Ratings Contacts Series 30 Butt type Series 46 Wiping type Rating at 115 Vac Res. Rating at 220 Vac Res. 1 Amp 0.25 Amp 0.5 Amp 0.125 Amp Circuitry SPST–N.O. (Standard); SPST–N.O. (w/Overtravel), SPST–N.O. (w/Positive Feel) SPDT, DPDT Break Before Make Life Expectancy SPST–N.O. (Standard): 1,000,000 operations SPST–N.O. (w/Positive Feel): 200,000 operations; SPST–N.O. (w/Overtravel): 500,000 operations 250,000 operations 25 milliohms or less on a new switch Contact Resistance Voltage Breakdown Insulation Resistance Operating Temperature All button caps can be printed in epoxy ink. Any type style or design can be used to produce the legend. If News Gothic Condensed style is used, limits can be approximated from the chart below; actual limits depend on specific legend. There is a per-button impression charge. A nominal set up charge per legend applies to orders of 1 to 99 pieces. (Non-standard legends are subject to a one time tooling charge. Contact Grayhill for more specifics.) Square Button Character and Line Limitation Grayhill Type Identification No. Character Height (Typ.) Sample Style and Sizes 4GH088 .083 (2,1) ABCDEFGHIJ 6 Char. 2 Lines TAB LOCATE 3 Char. 1 Line OFF 1GH125 .138 (3,5) ABCDEFGHIJ 5 Char. 1 Lines INDEX 3 Char. 1 Line TAB 3GH187 .207 (5,3) ABCDEF 3 Char. 1 Line OFF 2 Char. 1 Line 15 2GH250 .276 (7,0) ABCD 2 Char. 1 Line 15 N/A N/A Part Number* 46-05-07-502, 46-05-09-502, 46-01-07-500, 46-01-09-500 Alternate action (Push-Push) switches provide a maintained actuated position until the button is pushed again to release. Up Position C. & N.C. SHORTED N.O. OPEN 1000 megohms minimum -40°C to +85°C Legends ALTERNATE ACTION (PUSH-PUSH) OPERATING SEQUENCE 13/64(5,16) Approx. 1000 Vac between mutually insulated parts Round Button Character and Line Limitation 3/32(2,38) Approx. Push to Actuate Lock Down Position C. & N.O. SHORTED N.C. OPEN Standard Options Epoxy-sealed terminals and wire leads ORDERING INFORMATION & OPERATING FEATURES Square Bezel Butt Contact Wiping Contact Total Bottoming Travel Force .080 ± .015 30-01-01-500-* 30-05-01-502-* SPST–N.O. Momentary —— (2,03 ± 0,38) Positive Feel & .156 ± .015 30-01-04-500-* 30-05-04-502-* SPST–N.O. Overtravel —— (3,96 ± 0,38) 46-01-05-500-* 46-01-07-500-* 46-01-08-500-* 46-01-09-500-* Round Bezel Circuitry 46-05-05-502-* SPDT 46-05-07-502-* SPDT 46-05-08-502-* DPDT 46-05-09-502-* DPDT Feature Actuating Overtravel Force 10 ± 4 oz. —— 18 ± 4 oz. Momentary .180 min. (4,57) 1.1 ± .25 Lbs. —— .210 ± .015 Alternate Action 1.5 ± .25 Lbs. —— (5,33 ± 0,38) Momentary .180 min. (4,57) 1.6 ± .5 Lbs. —— .210 ± .015 Alternate Action 1.8 ± .5 Lbs. —— (5,33 ± 0,38) .046 Min. —— —— —— —— *Partial part number; complete the part number by adding a dash for button color: white –01; red –03; green –04; blue –05; yellow –06 or black –07. Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com Pushbutton Switches Lockwasher (Round Bezel): Steel, zinc trivalent chromate-plated Behind Panel Plate (Square Bezel): Steel, zinc trivalent chromate-plated Mounting Sleeve and Screws (46-01-08500, 46-01-09-500 only): Steel, zinc trivalent chromate-plated. Base: Phenolic per MIL-M-14, Type CFG Square Bezel: ABS (SPST, SPDT), thermoset plastic (DPDT) Mounting Nut, Bushing, and Round Bezel: Brass, tin zinc Button Cap: ABS (UL version is PPS) Shorting Bar: Series 30–Fine silver contact area Series 46–Phosphor bronze, silver-plated Terminals: Series 30–Fine silver contact area with silver-plated terminal ends Series 46–Silver contact surface with tin/silver clad terminal ends Spring: Tinned music wire Plunger: Polyphenylene sulfide (PPS) for 3001-01-500-X and 46-01-05-500-X. Nickel-plated brass for 46-01-07-500-X, 46-05-07-502-X, 4601-09-500-X and 46-05-09-502-X. Zinc trivalent chromate-plated brass for 46-01-08-500-X. Polycarbonate for all others. Operating Temperature: -40°C to +85°C