HWS410 February 2004 V1 QFN12L (3 x 3 mm) Features • Low Insertion Loss : 0.8dB @2.50GHz • • • • • 1.0dB @5.85GHz Isolation: 29.5dB @2.50GHz 20.5dB @5.85GHz Low DC Power Consumption Miniature QFN12L (3x3 mm) Plastic Lead (Pb) Free Package PHEMT process Lead Free Version of HWS383 Description The HWS410 is a GaAs PHEMT MMIC DPDT switch operating at DC-6GHz in a low cost miniature QFN12L (3 x 3 mm) plastic lead (Pb) free package. The HWS410 features low insertion loss and high isolation with very low DC power consumption. This switch can be used in IEEE 802.11a/b/g WLAN systems for combination of transmit/receive and antenna diversity functions. Electrical Specifications at 25°C with 0, +3V Control Voltages Parameter Test Conditions Insertion Loss 0.10-6.00GHz 2.40-2.50GHz 5.15-5.85GHz Isolation 0.10-6.00GHz 2.40-2.50GHz 5.15-5.85GHz Return Loss Input Power for One dB Compression Input Third Order Intermodulation Intercept Point Control Current Note: All measurements made in a 50 Hexawave Inc. Min. Typ. Max. Unit 1.0 0.8 1.0 1.0 1.3 dB dB dB 20.0 29.5 20.5 dB dB dB 0.10-6.00GHz 2.40-2.50GHz 5.15-5.85GHz 15 20 18 dB dB dB 2.00-6.00GHz @0/+3.0V 33 dBm 20dBm Per [email protected] 22dBm Per [email protected] 52 52 dBm dBm 27.0 18.0 5 200 uA system with 0/+3.0V control voltages, unless otherwise specified. 2 Prosperity Road II, Science-Based Industrial Park, Hsinchu, Taiwan. TEL 886-3-578-5100 FAX 886-3-577-0512 http://www.hw.com.tw All specifications are subject to change without notice. HWS410 February 2004 Absolute Maximum Ratings Typical Performance Data with 8pF Capacitors @ +25°C Parameter Insertion Loss vs Frequency Absolute Maximum RF Input Power +34dBm @ +3V -0.4 Control Voltage +6V -0.6 Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C -0.8 -1.2 B ) ') Pin Out (Top View) -1.0 B Insertion Loss(dB) V1 -1.4 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Frequency(GHz) 5.5 6.0 12 1 9 -10 2 8 -15 3 7 5 -25 / 6 B 4 -20 / -30 -35 ) +, -40 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Frequency(GHz) 5.5 & ') #& & # ! " # #$% #& # % #& # # *( - -% # # #& '" ( % & *. # ( 6.0 Logic Table for Switch On-Path Return Loss vs Frequency State -10 -15 Return Loss(dB) 10 B Isolation(dB) Isolation vs Frequency 11 -20 VC1 VC2 ANT1 ANT2 1 0 1 TX RX 2 1 0 RX TX ‘1’ = +3V to +5V ‘0’ = 0V to +0.2V -25 -30 -35 2.0 Hexawave Inc. 2.5 3.0 3.5 4.0 4.5 5.0 Frequency(GHz) 5.5 6.0 2 Prosperity Road II, Science-Based Industrial Park, Hsinchu, Taiwan. TEL 886-3-578-5100 FAX 886-3-577-0512 http://www.hw.com.tw All specifications are subject to change without notice.