Toggle Switches Miniature SPDT Toggle Switches TK11 Series KEYWAY Toggle Switches 12.70 12.70 3.96 8.89 10.41 Ø6.22 EPOXY SEAL A 3.17 A 12.7 6.86 0.76 8.89 Ø2.67 6.86 4.70 6.46 0.76 1.27 7.31 Ø2.92 4.70 KEYWAY THIS SIDE EPOXY SEAL 1/4-40 UNS-2A 1 3 2 5.08 2.69 3 4.70 2 5.08 1 TK11S_A1B1T1_ _ _ 2.03 Solder Lug Ø6.22 TK11S_A2B4T6_ _ _ Ø1.85 THT Right Angle EPOXY SEAL A 3.18 6.46 1.27 A 7.31 VS2 11.68 VS3 16.00 1 2 3 0.76 7.11 DIM. ‘A‘ 5.08 3.18 4.70 EPOXY SEAL 0.51 3.81 2 12.70 3.18 1 1.22 12.7 P.C. MOUNTING THT Vertical Right Angle TK11S_A2B4VS_ _ _ _ 1 2 3 0.76 15.75 4.70 4.70 8.13 Ø1.85 5.08 TK11S_A2B4T7_ _ _ DIM. ‘A‘ 6.46 3.81 1.22 Terminal Code 12.7 6.86 3 12.70 P.C. MOUNTING 15.75 Ø1.85 P.C. MOUNTING with V-Bracket Example Model Single Pole 3 Positions: 3-Way Wiring Diagram Schematics Position 1 KEYWAY 3 POS.3 POS.2 POS.1 Position 2 Position 3 Model No. 2 POS. 1 POS. 2 1 POS. 3 TK11S1~TK11S2 2-3 N/A 2-1 TK11S3~TK11S5 2-3 OPEN 2-1 2(COM) 2(COM) OPEN 1 1 3 3 How to order: TK11 1 S1 S2 S3 S4 S5 2 A1 A2 A3 A4 A5 A6 A61 A62 A7 A8 AA A11 AL1 AL2 3 B1 B2 B3 B4 B5 B6 B7 B8 B9 B11 B12 B13 B15 B16 A01 1 2 General Specifications: 3 4 POLES & SWITCH FUNCTION: SP ON-NONE-ON SP ON-NONE-MOM SP ON-OFF-ON SP MOM-OFF-MOM SP ON-OFF-MOM ACTUATOR (Details see page A04): Height = 10.41 mm Height = 5.08 mm Height = 13.97 mm Height = 16.26 mm Height = 21.34 mm Height = 12.30 mm, flatted, anti-rotation Height = 21.00 mm, flatted, anti-rotation Height = 13.49 mm, lever handle with cap Height = 12.37 mm,15/32 bushing Height = 17.56 mm,15/32 bushing Height = 26.30 mm, lever handel with cap, 15/32 bushing Height = 11.80 mm, plastic Height = 16.00 mm, locking lever Height = 16.26 mm, locking lever BUSHING (Details see page A04): Height = 8.89 mm, keyway (thd standard) Height = 8.89 mm, keyway (non-thd) Height = 7.10 mm, keyway (thd) Height = 7.10 mm, keyway (non-thd) Height = 7.52 mm, flat (torque) Height = 8.00 mm, keyway (torque) Height = 8.89 mm, flat (thd standard) Height = 8.89 mm, keyway (metric thd) Height = 7.52 mm, flat (splash proof) Height = 7.55 mm, keyway (thd standard) Height = 7.55 mm, keyway (non-thd) Height = 11.38 mm, keyway (15/32 bushing) Height = 7.55 mm, flat (thd standard) Height = 7.55 mm, flat (non-thd) [email protected] 5 B17 B18 B20 B25 B26 4 T1 T2 T3 T5-1 T5-2 T5-3 T5-4 T6 T6N T7 VS2 V2N VS3 VS4 VS5 5 AG AU UT GT UG UGT 6 7 Height = 3.50 mm, keyway Height = 11.38 mm, keyway (15/32 bushing) with teflon insert Height = 11.38 mm, keyway (15/32 bushing) Height = 8.00 mm, keyw., locking lever (thd) Height = 8.00 mm, keyw., locking lever (non-thd) TERMINALS(Details see page A04): Solder Lug PC Thru Hole Quick Connect Wire Wrap, Length = 18.70 mm Wire Wrap, Length = 24.20 mm Wire Wrap, Length = 10.55 mm Wire Wrap, Length = 26.97 mm PC Thru Hole, Right Angle PC Thru Hole, Right Angle, Snap-in PC Thru Hole, Vertical Right Angle V-Bracket, Height = 11.68 mm Snap-in V-Bracket, Height = 11.68 mm V-Bracket, Height = 16.00 mm V-Bracket, Height = 11.68 mm V-Bracket, Height = 16.00 mm CONTACT MATERIAL: Silver Gold Gold, Tin-Lead Silver, Tin-Lead Gold over Silver Gold over Silver, Tin-Lead MATERIALS » Movable Contact & Fixed Terminals: AG, GT, UG & UGT: Silver plated over copper alloy AU & UT: Gold over nickel plated over copper alloy MECHANICAL » Operating Temperature: -30°C to +85°C » Mechanical Life: 40,000 cycles CONTACT RATING » AG, GT, UG & UGT: 5A120VAC/28VDC 2A250VAC » AU & UT: 0.4VA max. 20V max. (AC/DC) ELECTRICAL 6 SEAL: Epoxy (Standard) No Epoxy » Contact Resistance: 10mΩ max. initial @ 2-4VDC 7 ROHS & LEAD FREE: RoHS Compliant (Standard) RoHS Compliant & Lead Free » Insulation Resistance: 1,000MΩ min. E N blank V 100mA for silver & gold plated contacts www.greatecs.com Toggle Switches TK12 Series KEYWAY 12.70 12.70 8.89 8.89 10.41 11.43 EPOXY SEAL 1.52 6 3 5 2 4 1 A 6.46 212.70 4 1 3 12.70 Ø1.85 4.70 5.08 2.70 3.81 P.C. MOUNTING Ø1.85 4.70 4.83 Terminals Code DIM. ‘A‘ VS4 11.68 VS5 16.00 0.76 0.76 11.43 DIM. ‘A‘ Ø1.85 4.70 19.05 4.70 4 12.70 3.81 THT Right Angle P.C. MOUNTING 6.35 4.83 5.08 6.46 1.27 1.22 3.81 P.C. MOUNTING 5.08 TK12D_A2B4T7_ _ _ 2 1.27 6 3 1 4 5 6 3.18 3.81 5 6 12.7 7.31 6 5 TK12D_A2B4T6_ _ _ EPOXY SEAL A 7.31 4.70 4 4 12.7 19.05 Ø6.22 4.83 0.76 1.27 2.03 Solder Lug 1.27 6.46 3.17 4.83 TK12D_A1B1T1_ _ _ 2.70 KEYWAY THIS SIDE 4.70 1/4-40 UNS-2A EPOXY SEAL A A 11.43 0.76 Ø2.92 Ø6.22 5 12.85 Ø2.67 Toggle Switches Miniature DPDT Toggle Switches THT Vertical Right Angle 6.35 7.11 9.14 TK12D_A2B4VS_ _ _ _ EPOXY 0.51 SEAL with V-Bracket Example Model Double Poles 3 Positions: 3-Way Wiring Diagram Schematics Position 1 KEYWAY IN POS. 1 (OUT) 6 POS. 2 3 6 5 2 (IN) 4 1 5 (OUT) 4 OUT 2 POS. 3 3 6 3 2 (IN) 5 2 (IN) 1 4 1 (OUT) OUT 3 How to order: TK12 1 2 A1 A2 A3 A4 A5 A6 A61 A62 A7 A8 AA A11 AL1 AL2 3 B1 B2 B3 B4 B5 B6 B7 B8 B9 B11 B12 B13 Position 3 OUT 1 POS.3 POS.2 POS.1 D1 D2 D3 D4 D5 D6 D7 D8 Position 2 Model No. 1 2 2-3,5-6 N/A 2-1,5-4 TK12D3~TK12D5 2-3,5-6 OPEN 2-1,5-4 TK12D6~TK12D8 2-3,5-6 2-3,5-4 2-1,5-4 General Specifications: 3 4 5 POLES & SWITCH FUNCTION: DP ON-NONE-ON DP ON-NONE-MOM DP ON-OFF-ON DP MOM-OFF-MOM DP ON-OFF-MOM DP ON-ON-ON DP MOM-ON-MOM DP ON-ON-MOM B15 B16 B17 B18 ACTUATOR (Details see page A04): Height = 10.41 mm Height = 5.08 mm Height = 13.97 mm Height = 16.26 mm Height = 21.34 mm Height = 12.30 mm, flatted, anti-rotation Height = 21.00 mm, flatted, anti-rotation Height = 13.49 mm, lever handle with cap Height = 12.37 mm,15/32 bushing Height = 17.56 mm,15/32 bushing Height = 26.30 mm, with cap, 15/32 bushing Height = 11.80 mm, plastic Height = 16.00 mm, locking lever Height = 16.26 mm, locking lever T1 T2 T3 T5-1 T5-2 T5-3 T5-4 T6 T6N T7 VS2 V2N VS3 VS4 VS5 BUSHING (Details page A04): Height = 8.89 mm, keyway (thd standard) Height = 8.89 mm, keyway (non-thd) Height = 7.10 mm, keyway (thd) Height = 7.10 mm, keyway (non-thd) Height = 7.52 mm, flat (torque) Height = 8.00 mm, keyway (torque) Height = 8.89 mm, flat (thd standard) Height = 8.89 mm, keyway (metric thd) Height = 7.52 mm, flat (splash proof) Height = 7.55 mm, keyway (thd standard) Height = 7.55 mm, keyway (non-thd) Height = 11.38 mm, keyway (15/32 bushing) 5 [email protected] TK12D1~TK12D2 B20 B25 B26 4 AG AU UT GT UG UGT 6 E N 7 blank V 6 7 Height = 7.55 mm, flat (thd standard) Height = 7.55 mm, flat (non-thd) Height = 3.50 mm, keyway Height = 11.38 mm, keyway (15/32 bushing) with teflon insert Height = 11.38 mm, keyway (15/32 bushing) Height = 8.00 mm, keyw., locking lever (thd) Height = 8.00 mm, keyw., locking lever (non-thd) TERMINALS(Details see page A04): Solder Lug PC Thru Hole Quick Connect Wire Wrap, Length = 18.70 mm Wire Wrap, Length = 24.20 mm Wire Wrap, Length = 10.55 mm Wire Wrap, Length = 26.97 mm PC Thru Hole, Right Angle PC Thru Hole, Right Angle, Snap-in PC Thru Hole, Vertical Right Angle V-Bracket, Height = 11.68 mm Snap-in V-Bracket, Height = 11.68 mm V-Bracket, Height = 16.00 mm V-Bracket, Height = 11.68 mm V-Bracket, Height = 16.00 mm CONTACT MATERIAL: Silver Gold Gold, Tin-Lead Silver, Tin-Lead Gold over Silver Gold over Silver, Tin-Lead SEAL: Epoxy (Standard) No Epoxy ROHS & LEAD FREE: RoHS Compliant (Standard) RoHS Compliant & Lead Free MATERIALS » Movable Contact & Fixed Terminals: AG, GT, UG & UGT: Silver plated over copper alloy AU & UT: Gold over nickel plated over copper alloy MECHANICAL » Operating Temperature: -30°C to +85°C » Mechanical Life: 40,000 cycles CONTACT RATING » AG, GT, UG & UGT: 5A120VAC/28VDC 2A250VAC » AU & UT: 0.4VA max. 20V max. (AC/DC) ELECTRICAL » Contact Resistance: 10mΩ max. initial @ 2-4VDC 100mA for silver & gold plated contacts » Insulation Resistance: 1,000MΩ min. www.greatecs.com A02 Toggle Switches Miniature 3PDT & 4PDT Toggle Switches TK13 Series KEYWAY Toggle Switches 14.48 8.90 10.41 12.70 1.52 10.54 14.48 8.90 0.76 1.52 10.54 10.41 16.51 0.76 Ø2.92 Ø2.92 1/4-40 UNS-2A KEYWAY THIS SIDE KEYWAY THIS SIDE KEYWAY 4.70 EPOXY SEAL 1/4-40 UNS-2A 1.27 4.83 4.70 EPOXY SEAL 12.70 4.83 TK13T_A1B1T1_ _ _ 3PDT, Solder Lug TK13F_A1B1T1_ _ _ 4PDT, Solder Lug EPOXY SEAL A Ø6.22 4.83 2.03 21.59 2.03 21.59 P.C. MOUNTING 5.08 4.83 3.18 14.35 3.81 A 6.46 1.27 4.83 12.70 14.35 7.31 Ø1.85 Ø6.22 1.22 EPOXY SEAL 0.76 3.81 12.70 A 5.08 16.51 P.C. MOUNTING 1.22 5.08 4.83 14.35 TK13T_A2B4T7_ _ _ 3PDT, THT Right Angle A 6.46 14.35 7.31 1.22 Ø1.85 3.81 12.70 3.18 3.81 5.08 TK13F_A2B4T7_ _ _ 0.76 4PDT, THT Right Angle Example Model 4 Poles 3 Positions: 3-Way Wiring Diagram Schematics Position 1 KEYWAY POS.3 POS.2 POS.1 TK1331~TK1332 (OUT) 12 (OUT) 9 6 3 11 8 5 2 (IN) (IN) 7 4 1 10 12 9 6 11 8 (IN) 7 5 10 (OUT) 3 12 2 (IN) 4 1 (OUT) 11 10 (OUT) POS. 2 9 6 3 8 5 2 (IN) (IN) 7 4 1 (OUT) POS. 3 TK13 1 T1 T3 T5 F2 F4 F6 F8 2 A1 A2 A3 A4 A5 A6 A61 A62 A7 A8 AA A11 AL1 AL2 3 B1 B2 B3 B4 B5 B6 B7 B8 B9 A03 Position 3 TK1343~TK1345 2-1,5-4,8-7 N/A 2-3,5-6, 8-9,11-12 TK1346~TK1348 OPEN 2-1,5-4,8-7,11-10 2-3,5-4,8-9,11-10 General Specifications: 3 4 POLES & SWITCH FUNCTION: 3P ON-NONE-ON T2 3P ON-NONE-MOM 3P ON-OFF-ON T4 3P MOM-OFF-MOM 3P ON-OFF-MOM F1 4P ON-NONE-ON 4P ON-NONE-MOM F3 4P ON-OFF-ON 4P MOM-OFF-MOM F5 4P ON-OFF-MOM 4P ON-ON-ON F7 4P MOM-ON-MOM 4P ON-ON-MOM ACTUATOR (Details see page A04): Height = 10.41 mm Height = 5.08 mm Height = 13.97 mm Height = 16.26 mm Height = 21.34 mm Height = 12.30 mm, flatted, anti-rotation Height = 21.00 mm, flatted, anti-rotation Height = 13.49 mm, lever handle with cap Height = 12.37 mm,15/32 bushing Height = 17.56 mm,15/32 bushing Height = 26.30 mm, lever handel with cap, 15/32 bushing Height = 11.80 mm, plastic Height = 16.00 mm, locking lever Height = 16.26 mm, locking lever BUSHING (Details see page A04): Height = 8.89 mm, keyway (thd standard) Height = 8.89 mm, keyway (non-thd) Height = 7.10 mm, keyway (thd) Height = 7.10 mm, keyway (non-thd) Height = 7.52 mm, flat (torque) Height = 8.00 mm, keyway (torque) Height = 8.89 mm, flat (thd standard) Height = 8.89 mm, keyway (metric thd) Height = 7.52 mm, flat (splash proof) [email protected] OPEN TK1341~TK1342 How to order: 2 N/A 2-3,5-6,8-9 TK1333~TK1335 POS. 1 1 Position 2 Model No. 5 B11 B12 B13 B15 B16 B17 B18 B20 B25 B26 4 T1 T2 T3 T5-1 T5-2 T5-3 T5-4 T6 T6N T7 VS2 V2N VS3 VS4 VS5 5 AG AU UT GT UG UGT 6 7 MATERIALS » Movable Contact & Fixed Terminals: AG, GT, UG & UGT: Silver plated over copper alloy AU & UT: Gold over nickel plated over copper alloy Height = 7.55 mm, keyway (thd standard) Height = 7.55 mm, keyway (non-thd) Height = 11.38 mm, keyway (15/32 bushing) Height = 7.55 mm, flat (thd standard) Height = 7.55 mm, flat (non-thd) Height = 3.50 mm, keyway Height = 11.38 mm, keyway (15/32 bushing) with teflon insert Height = 11.38 mm, keyway (15/32 bushing) Height = 8.00 mm, keyw., locking lever (thd) Height = 8.00 mm, keyw., locking lever (non-thd) MECHANICAL » Operating Temperature: -30°C to +85°C » Mechanical Life: 40,000 cycles CONTACT RATING » AG, GT, UG & UGT: 5A120VAC/28VDC 2A250VAC » AU & UT: 0.4VA max. 20V max. (AC/DC) TERMINALS(Details see page A04): Solder Lug PC Thru Hole Quick Connect Wire Wrap, Length = 18.70 mm Wire Wrap, Length = 24.20 mm Wire Wrap, Length = 10.55 mm Wire Wrap, Length = 26.97 mm PC Thru Hole, Right Angle PC Thru Hole, Right Angle, Snap-in PC Thru Hole, Vertical Right Angle V-Bracket, Height = 11.68 mm Snap-in V-Bracket, Height = 11.68 mm V-Bracket, Height = 16.00 mm V-Bracket, Height = 11.68 mm V-Bracket, Height = 16.00 mm CONTACT MATERIAL: Silver Gold Gold, Tin-Lead Silver, Tin-Lead Gold over Silver Gold over Silver, Tin-Lead ELECTRICAL » Contact Resistance: 10mΩ max. initial @ 2-4VDC 100mA for silver & gold plated contacts » Insulation Resistance: 1,000MΩ min. 6 SEAL: Epoxy (Standard) No Epoxy 7 ROHS & LEAD FREE: RoHS Compliant (Standard) RoHS Compliant & Lead Free E N blank V www.greatecs.com Toggle Switches Additional Informations for TK11, 12 & 13 Series A1: No Cap (Standard) A1A: Black Plastic A1B: White Plastic A1C: Red Plastic A1D: Orange Plastic A1E: Yellow Plastic A1F: Green Plastic A1G: Blue Plastic A1K: Brown Plastic A1H: Gray Plastic TOGGLE CAP Ø2.92 9.73 10.41 A2: No Cap (Standard) A2A: Black Plastic A2B: White Plastic A2C: Red Plastic A2D: Orange Plastic A2E: Yellow Plastic A2F: Green Plastic A2G: Blue Plastic A2K: Brown Plastic A2H: Gray Plastic TOGGLE CAP 7.92 Ø2.67 5.08 A1(Standard) Ø3.30 13.97 A2 4.98 6.48 21.0 13.49 12.30 12.12 Ø3.28 12.37 11.38 A61 A62 10.50 BLACK PLASTIC 11.38 TOGGLE CAP 26.30 10.00 11.80 10.00 11.38 0.51 A8 A9 Actuators A7 & A8: Use with B13 bushing; Use with B18 & B20, the lever is antirotation. A11: No Cap (Standard) A11A: Black Plastic A11B: White Plastic A11C: Red Plastic A11D: Orange Plastic A11E: Yellow Plastic A11F: Green Plastic A11G: Blue Plastic A11K: Brown Plastic A11H: Gray Plastic 3.60 AA A11 Actuator AA: Use with B18 bushing only. Actuators A11: Shown with standard B1 bushing; +1.78mm for B3 bushing; -0.51mm for B6 bushing; Standard for T1 & T2 terminal; -0.40mm for T6, T7 & VS2. 16.38 21.34 Chrome Finish A7 Actuators A6, A61 & A62: Flatted with Antirotation; Use with bushings B11, B12, B15 & B16 only. Gloss Finish Plastic 17.56 0.51 A6 A5 Ø6.09 Ø6.09 1.91 15/32-32 UNS-2A 2.54 Ø5.08 A4 -0.51mm for B6 bushing. 15/32-32 UNS-2A 2.54 21.34 16.26 A3 Actuators A1~A5: Shown with standard B1 bushing; +1.78mm for B3 bushing; Ø5.08 Ø3.30 Ø3.30 Toggle Switches ACTUATOR OPTIONS Actuator A9: B1/B2 bushing standard; with black & red color only. 5.44 5.44 2 positions lock 16.00 14.40 unlocked locked 16.26 14.73 unlocked locked 1/4-40 UNS-2A 1/4-40 UNS-2A 3 positions lock 8.00 8.00 1.40 1.40 AL1 AL2 BUSHING OPTIONS Ø7.98 Ø7.98 1.02 1.02 0.71 1/4-40 UNS-2A 7.10 B3(THD STD) B4(Non-THD) 1/4-40 UNS-2A 7.52 0.51 B1(THD STD) B2(Non-THD) 5.72 0.71 1/4-40 UNS-2A 1/4-40 UNS-2A 8.89 1.02 5.72 0.71 1.02 8.00 0.51 B5(High Torque) 1.02 0.71 1/4-40 UNS-2A 1/4-40 UNS-2A 8.89 Ø7.98 Ø7.98 1.02 M6P 0.75 THD 8.90 1.44 5.72 0.71 1/4-40 UNS-2A 7.55 1/4-40 UNS-2A 1.44 7.55 1.02 B6(High Torque) B7(THD STD) B8(Metric THD) B11(THD) B12(Non-THD) B4 is standard for terminals T6, T7, VS. B15(THD) B16(Non-THD) B11, B12, B15 & B16: Use with actuator A6 only TEFLON 0.50 Ø11.81 SEALS 1/4-40 UNS-2A 0.80 Ø6.35 1.02 5.72 1.35 Ø10.05 7.52 1/4-40 UNS-2A Ø10.20 0.83 0.51 O-ring A O-ring B supplied with B9 bushing 1.65 0.79 12/32-32 UNS-2A 11.38 3.50 1.44 B9(Splash Proof) 1.65 B13 0.79 12/32-32 UNS-2A 12/32-32 UNS-2A 11.38 11.38 0.51 0.51 B17 1.65 0.79 B18 0.51 B20 B13: Use with actuators A7 & A8 only; Bear strength from top of actuator up to 10kg aside up to 15kg. B18: Use with actuators A7, A8 & A10 only; With plastic (teflon) insert; Bear strength from top of actuator up to 20kg aside up to 15kg. B20: Use with actuators A7, A8 & A10 only; Bear strength from top of actuator up to 20kg aside up to 15kg. TERMINAL OPTIONS 1.91 1.98 3.96 6.35 1.19 EPOXY SEAL 4.80 6.35 Length 4.80 1.27 1.57 2.03 1.27 T1 Solder Lug T2 THT [email protected] T3 Quick Connect T5 Wire Wrap T6N Right Angle, Snap-in, THT V2N Snap-in, V-Bracket www.greatecs.com A04