superGRIPTM Clearance Guidelines Required Board Keep Out Region for superGRIPTM Heat Sink Attachment Hardware ATS-SUPERGRIP_CLEARANCE_GUIDELINES-R1 PATENT PENDING OR PATENT 6308771 7 8 5 6 Advanced Thermal Solutions, Inc PROPRIETARY DIRECTION OF AIR FLOW 2X 10.00 D YA C A A B A 1.00 3 4 NOTES: 1. ALL DIMENSIONS ARE IN MM. 2. ADDITIONAL CONSTRAINS MAY APPLY IF / WHEN HEAT SINK ARE USED WITH LENGTH / WIDTH DIMENSION THAT EXCEED NOM YA PLEASE THE XA SIZE & YA DIMENSIONXA SHOWN IN THE TABLE. CONTACT ATS DESIGN ENGINEER FOR THESE APPLICATIONS. (mm) (mm) (mm) XA 1.00 15 x 15 18.5 18 17 x 17 20.6 20.1 19 x 19 22.7 21 x 21 24.9 23 x 23 27.1 25 x 25 29.3 27 x 27 31.5 29 x 29 33.6 30 x 30 34.7 31 x 31 35.8 32.5 x 32.5 37.4 33 x 33 37.9 35 x 35 40 37.5 x 37.5 42.7 40 x 40 45.4 42.5 x 42.5 48 45 x 45 50.7 REV. R0 R1 22.2 REQUIRED BOARD KEEP superCLIPHE 24.4 ATTACHMENT H 26.6 NOM FRAME CLIP SPRING CLIP FC120SS28.8 FC150SS 31 FC170SS FC190SS33.1 FC210SS 34.2 FC230SS FC250SS35.3 FC270SS FC290SS36.9 FC300SS FC310SS37.4 FC325SS39.5 FC330SS FC350SS42.2 FC375SS FC400SS44.9 FC425SS47.5 FC450SS 50.2 SC120SS SC150SS SC170SS SC190SS SC210SS SC230SS SC250SS SC270SS SC290SS SC300SS SC310SS SC325SS SC330SS SC350SS SC375SS SC400SS SC425SS SC450SS SIZE 12.0 15.0 17.0 19.0 21.0 23.0 25.0 27.0 29.0 30.0 31.0 32.5 33.0 35.0 37.5 40.0 42.5 45.0 Th Ad rep to SECTION A-A DWN: DESIGNER: Advanced Thermal Solutions, Inc CDM CDM 89 Access Road #27 Norwood MA, 02062 DESCRIPTION: APPROVED /RELEASED FOR ATS MANUFACTURE: ED 04/16/2009 PWB CLEARANCE GUIDELINES FOR superGRIP NOTES: 6 sinks are 7 apply if / when heat 8 1. Additional constraints may used with length or width dimensions that exceed the XA and YA dimensions shown in the table. Please contact ATS for assistance with such applications. 2. Data provided for reference only and may vary by application. 3. ATS reserves the right to update or change its products without notice to improve the design or performance. 4. Contact ATS to learn about custom options available. SCALE: DATE: DWG. NO. TOLERANCE: SEE TABLE 5 ATS-SUPERGRIP_CLEAR 04/16/2009 NTS 4 FINISH: MATERIAL: NA NA 3 For more information, to find a distributor or to place an order, call 781.769.2800, email [email protected], or visit www.qats.com R3_1113