RoHS MLB10 Multilayer Ferrite Beads MLB10 Dimensions: Inches (mm) 0.079±0.008 (2.0±0.20) 0.049±0.008 (1.25±0.20) 0.035±0.008 (0.9±0.20) 0.020±0.012 (0.5±0.30) D 0.047 (1.2) 0.039 (1.0) Allied Part Number 0.045 (1.14) Features • • • • Surface mount EMI suppression components Nickel barrier termination for excellent resistance to solder heat Multi layer technology Flow and reflow soldering Electrical Impedance Range: 11Ω to 2700Ω Other Impedances Available. Tolerance: 25% over entire range Operating Range: -40ºC ~ +125ºC Storage Temp: -40ºC ~ +125ºC Rated Current: Based on temp rise not to exceed 30ºC Resistance to Solder Heat Pre-Heat 150ºC, 1 minute Solder Composition: Sn99.5%-Cu0.5% Solder Temp: 260±5ºC for 10sec ±1 sec. Minimum of 75% of Electrode covered with new solder. Impedance within 30% of initial value. Test Equipment (Z): HP4291A RF Impedance/Material Analyzer (RDC): Agilent 4338 Physical Packaging: 4000 per 7 inch reel. Impedance (Ω) @ 100 MHz +/- 25% DC Resistance (Ω) Max. Rated Current (mA) MLB10-110-RC 11 0.10 900 MLB10-170-RC 17 0.10 600 MLB10-260-RC 26 0.10 600 MLB10-300-RC 30 0.10 600 MLB10-400-RC 40 0.10 600 MLB10-600-RC 60 0.10 900 MLB10-121-RC 120 0.20 800 MLB10-151-RC 150 0.20 800 MLB10-221-RC 220 0.30 750 MLB10-301-RC 300 0.30 700 MLB10-471-RC 470 0.35 700 MLB10-601-RC 600 0.40 500 MLB10-102-RC 1000 0.45 400 MLB10-152-RC 1500 0.60 200 MLB10-202-RC 2000 0.70 200 MLB10-252-RC 2500 0.70 200 MLB10-272-RC 2700 0.70 200 Marking: None All specifications subject to change without notice. 949-356-1780 ALLIED COMPONENTS INTERNATIONAL REVISED 09/28/2015 www.alliedcomponents.com