Surface Mount Crystal XT46C

XT46C
Vishay Dale
Surface Mount Crystal
FEATURES
• Ultra-miniature size: 6.0 x 3.5 x 1.0 (mm)
• Seam sealing
• Ceramic package
• Emboss taping
• Reflow soldering
• Compliant to RoHS directive 2002/95/EC
This part is an ultra miniature package with size of
6.0 mm x 3.5 mm x 1.0 mm. With its ceramic base and metal
cover it provides the durability and reliability necessary for
strenuous process like infrared and vapor phase reflow.
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
Frequency range
SYMBOL
CONDITION
FO
UNIT
MIN.
TYP.
MAX.
MHz
10.000
-
30.000
-
Frequency tolerance
ΔF/FO
at 25 °C
ppm
-
± 30
Temperature stability
TC
ref. to 25 °C
ppm
-
± 30
-
°C
- 10
-
+ 60
+ 85
Operating temperature range
TOPR
Storage temperature range
TSTG
°C
- 40
-
Shunt capacitance
C0
pF
-
-
7
Load capacitance
CL
customer specified
pF
10
-
series
Insulation resistance
IR
100 VDC
MΩ
500
-
-
Drive level
DL
μW
-
10
100
Aging
Fa
ppm
-5
-
+5
at 25 °C, per year
EQUIVALENT SERIES RESISTANCE (ESR) AND MODE OF VIBRATION (MODE)
FREQUENCY RANGE (MHz)
MAX. ESR (Ω)
MODE
FREQUENCY RANGE (MHz)
MAX. ESR (Ω)
MODE
10.000 to 11.999
60
fundamental
19.000 to 19.999
40
fundamental
12.000 to 12.099
50
fundamental
20.000 to 29.999
35
fundamental
13.000 to 18.999
45
fundamental
30.000
30
fundamental
DIMENSIONS in inches [millimeters]
0.236 ± 0.008
[6.0 ± 0.2]
MARKING
AREA
0.138 ± 0.008
[3.5 ± 0.2]
0.055
[1.4]
0.039 ± 0.4
[1.0 ± 0.1]
0.118 ± 0.004
[3.0 ± 0.10]
0.035 [0.9]
0.055 [1.4]
0.089 [1.5]
0.043 [1.1]
0.035 [0.9]
0.055 [1.4]
0.077 0.094 0.077
[1.95] [2.4] [1.95]
0.055
[1.4]
Recommended Solder Pattern
Note
Pin #2 and pin #4 are connected through cover, in case
connected to GND. Frequency might be drifted.
0.236 ± 0.008
[6.0 ± 0.2]
Document Number: 35021
Revision: 09-Mar-10
For technical questions, contact: [email protected]
www.vishay.com
1
XT46C
Surface Mount Crystal
Vishay Dale
ORDERING INFORMATION
XT46C
-20
25M
e4
MODEL
LOAD
blank = series
-20 = 20 pF standard
-32 = 32 pF
FREQUENCY/MHz
JEDEC LEAD (Pb)-FREE
STANDARD
GLOBAL PART NUMBER
X
T
4
6
2
MODEL
0
A
LOAD
2
PACKAGE
CODE
5
M
FREQUENCY
GLOBAL PART NUMBERING
X
T
9
S
MODEL NUMBER
XT9S = XT49S
XT9M = XT49M
XTU1 = XTUM1
2
0
A
LOAD
CAPACITANCE
PACKAGE
CODE
18 = 18 pF
20 = 20 pF
NL = series
to be specified by
customer
Tape and reel
G = RF5 (XT9S)
H = RF7 (XT9M)
Bulk
A = B04
(all models)
N
A
4
0
M
OPTIONS
FREQUENCY
NA = no additional
options
RR = extended
temperature
of - 40 °C to + 85 °C
Contact factory for
all other options
4M = 4 MHz
40M = 40 MHz
100M = 100 MHz
12M288 = 12.288 MHz
M is used as
decimal place
holder in frequency
Example: XT49S-20 40M
X
T
3
6
2
0
MODEL NUMBER
LOAD CAPACITANCE
XT46 = XT46C
XT36 = XT36C
18 = 18 pF
20 = 20 pF
NL = series
to be specified by
customer
A
PACKAGE
CODE
Tape and reel
H = RF7
Bulk
A = B04
(all models)
1
2
M
FREQUENCY
4M = 4 MHz
40M = 40 MHz
100M = 100 MHz
12M288 = 12.288 MHz
M is used as
decimal place
holder in frequency
Example: XT36C-20 12M
www.vishay.com
2
For technical questions, contact: [email protected]
Document Number: 35021
Revision: 09-Mar-10
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000