VLMO31.. www.vishay.com Vishay Semiconductors Standard SMD LED PLCC-2 FEATURES • SMD LED with exceptional brightness • Luminous intensity categorized • Compatible with automatic placement equipment • EIA and ICE standard package • Compatible with IR reflow, vapor phase and wave solder processes according to CECC • Available in 8 mm tape • Low profile package 948553 • Non-diffused lens: Excellent for coupling to light pipes and backlighting • Low power consumption • Luminous intensity IVmax./IVmin. ≤ 1.6 DESCRIPTION ratio in one packaging unit • Preconditioning according to JEDEC® level 2a This device has been designed for applications requiring narrow brightness and color selection. • ESD-withstand voltage up to 2 kV according to JESD22-A114-B The package of this device is the PLCC-2. It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled up with clear epoxy. • AEC-Q101 qualified PRODUCT GROUP AND PACKAGE DATA APPLICATIONS • Product group: LED • Automotive: Backlighting in dashboards and switches • Package: SMD PLCC-2 • Product series: standard • Telecommunication: telephone and fax • Angle of half intensity: ± 60° • Indicator and backlight for audio and video equipment • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 Indicator and backlighting in • Indicator and backlight in office equipment • Flat backlight for LCDs, switches, and symbols • General use PARTS TABLE PART COLOR LUMINOUS INTENSITY (mcd) at IF (mA) MIN. TYP. MAX. WAVELENGTH (nm) FORWARD VOLTAGE (V) at IF (mA) MIN. TYP. MAX. at IF (mA) TECHNOLOGY MIN. TYP. MAX. VLMO31J1K2-GS08 Soft orange 4.5 - 11.2 10 598 - 611 10 - 2.2 2.8 20 VLMO31J1K2-GS18 Soft orange 4.5 - 11.2 10 598 - 611 10 - 2.2 2.8 20 GaAsP on GaP VLMO31J1K2-35-GS08 Soft orange 4.5 - 11.2 10 602 - 609 10 - 2.2 2.8 20 GaAsP on GaP VLMO31J1L2-GS08 Soft orange 4.5 - 18 10 598 - 611 10 - 2.2 2.8 20 GaAsP on GaP VLMO31J1L2-GS18 Soft orange 4.5 - 18 10 598 - 611 10 - 2.2 2.8 20 GaAsP on GaP VLMO31K1L2-GS08 Soft orange 7.1 - 18 10 598 - 611 10 - 2.2 2.8 20 GaAsP on GaP VLMO31K1L2-GS18 Soft orange 7.1 - 18 10 598 - 611 10 - 2.2 2.8 20 GaAsP on GaP Rev. 1.4, 30-Sep-13 GaAsP on GaP Document Number: 81333 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMO31.. www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C unless otherwise specified) VLMO31.. PARAMETER TEST CONDITION SYMBOL VALUE VR 6 V Tamb ≤ 60 °C IF 30 mA tp ≤ 10 μs IFSM 0.5 A PV 100 mW Reverse voltage (1) DC forward current Surge forward current Power dissipation Junction temperature UNIT Tj 100 °C Operating temperature range Tamb -40 to +100 °C Storage temperature range Tstg -40 to +100 °C t≤5s Tsd 260 °C Mounted on PC board (pad size > 16 mm2) RthJA 400 K/W Soldering temperature Thermal resistance junction/ambient Note (1) Driving LED in reverse direction is suitable for short term application OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C unless otherwise specified) VLMO31.., SOFT ORANGE PARAMETER TEST CONDITION Luminous intensity (1) IF = 10 mA Dominant wavelength IF = 10 mA Peak wavelength IF = 10 mA PART SYMBOL MIN. TYP. MAX. UNIT VLMO31J1K2 IV 4.5 - 11.2 mcd VLMO31J1K2-35 IV 4.5 - 11.2 mcd VLMO31J1L2 IV 4.5 - 18 mcd VLMO31K1L2 IV 7.1 - 18 mcd λd 598 - 611 nm λd 602 - 609 nm λp - 605 - nm deg VLMO31J1K2-35 Angle of half intensity IF = 10 mA ϕ - ± 60 - Forward voltage IF = 20 mA VF - 2.2 2.8 V Reverse voltage IR = 10 μA VR 6 - - V VR = 0 V, f = 1 MHz Cj - 15 - pF Junction capacitance Notes (1) In one packing unit I Vmax./IVmin. ≤ 1.6 LUMINOUS INTENSITY CLASSIFICATION GROUP STANDARD J K L M LIGHT INTENSITY (mcd) VISHAY OSRAM VLMO31J1K2 LOT670-J1K2 OPTIONAL MIN. MAX. 1 4.5 5.6 VLMO31J1L2 LOT670-J1L2 2 5.6 7.1 VLMO31K1L2 LOT670-K1L2 1 7.1 9.0 2 9.0 11.2 1 11.2 14.0 2 14.0 18.0 1 18.0 22.4 2 22.4 28.0 Note • Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above Type Numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. In order to ensure availability, single wavelength groups will not be orderable. Rev. 1.4, 30-Sep-13 CROSSING TABLE COLOR CLASSIFICATION SOFT ORANGE GROUP DOM. WAVELENGTH (nm) MIN. MAX. 1 598 601 2 600 603 3 602 605 4 604 607 5 606 609 6 608 611 Note • Wavelengths are tested at a current pulse duration of 25 ms. Document Number: 81333 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMO31.. www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 60 1.2 50 1.0 Irel - Relative Intensity IF - Forward Current (mA) soft orange 40 30 20 0.4 0 570 0 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) 95 10905 610 630 650 670 λ - Wavelength (nm) Fig. 4 - Relative Intensity vs. Wavelength 100 10 000 soft orange I F - Forward Current (mA) Tamb < 60 °C tp/T = 0.005 0.01 1000 0.02 0.05 0.2 0.5 DC 0.1 10 1 0.01 1 1 100 10 0 tp - Pulse Length (ms) 95 9985 10 0.1 0.1 Fig. 2 - Forward Current vs. Pulse Length 0° 10° 2 3 4 5 Fig. 5 - Forward Current vs. Forward Voltage 20° 40° 1.0 0.9 50° 0.8 60° 70° ϕ - Angular Displacement 30° 0.7 1 V F - Forward Voltage (V) 95 9990 I v rel - Relative Luminous Intensity 100 590 95 10324 Fig. 1 - Forward Current vs. Ambient Temperature IF - Forward Current (mA) 0.6 0.2 10 IV rel - Relative Luminous Intensity 0.8 10 soft orange 1 0.1 80° 0.01 0.6 0.4 0.2 95 10319 Fig. 3 - Relative Luminous Intensity vs. Angular Displacement Rev. 1.4, 30-Sep-13 1 0 95 9997 10 100 I F - Forward Current (mA) Fig. 6 - Relative Luminous Intensity vs. Forward Current Document Number: 81333 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMO31.. www.vishay.com Vishay Semiconductors 2.0 soft orange IV rel - Relative Luminous Intensity Ispec - Specific Luminous Intensity 2.4 2.0 1.6 1.2 0.8 0.4 1.2 0.8 0.4 0 0 95 10259 soft orange 1.6 10 20 50 100 200 500 I F (mA) 1 0.5 0.2 0.1 0.05 0.02 t p /T 0 20 Fig. 7 - Relative Luminous Intensity vs. Forward Current/Duty Cycle 40 60 80 100 Tamb - Ambient Temperature (°C) 95 9994 Fig. 8 - Relative Luminous Intensity vs. Ambient Temperature PACKAGE DIMENSIONS in millimeters 0.9 1.75±0.1 3.5±0.2 0.8 Technical drawings according to DIN specifications A C 2.2 2.8±0.15 Pin identification Dimensions in mm Drawing-No.: 6.541-5067.01-4 Issue: 6; 23.09.13 Ø2.4 3 +0.15 Mounting Pad Layout Area covered with solderresist 4 2.6 (2.8) 1.2 1.6 (1.9) 4 Dimensions: Reflow and vapor phase (wave soldering) Rev. 1.4, 30-Sep-13 Document Number: 81333 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMO31.. www.vishay.com Vishay Semiconductors METHOD OF TAPING/POLARITY AND TAPE AND REEL SMD LED (VLM.3 - SERIES) Vishay’s LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO) 564) for automatic component insertion. The blister tape is a plastic strip with impressed component cavities, covered by a top tape. REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS18 (= 8000 PCS.) PREFERRED 10.4 8.4 120° 4.5 3.5 13.00 12.75 2.5 1.5 Adhesive tape 62.5 60.0 Identification Label: Vishay type group tape code production code quantity Blister tape 14.4 max. 321 329 18857 Fig. 11 - Reel Dimensions - GS18 Component cavity 94 8670 SOLDERING PROFILE TAPING OF VLM.3... IR Reflow Soldering Profile for lead (Pb)-free soldering Preconditioning acc. to JEDEC level 2a 2.2 2.0 3.5 3.1 300 3.6 3.4 4.0 3.6 8.3 7.7 1.85 1.65 1.6 1.4 4.1 3.9 Temperature (°C) 5.75 5.25 240 °C 217 °C 200 max. 30 s 150 max. 100 s max. 120 s 100 0.25 4.1 3.9 max. 260 °C 245 °C 255 255°C°C 250 max. ramp down 6 °C/s max. ramp up 3 °C/s 50 2.05 1.95 94 8668 0 0 50 100 Fig. 9 - Tape Dimensions in mm for PLCC-2 REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS08 (= 1500 PCS.) TTW Soldering (acc. to CECC00802) 5s 13.00 12.75 63.5 60.5 Identification Label: Vishay type group tape code production code quantity 235 °C to 260 °C first wave 200 lead temperature second full line: typical wave dotted line: process limits ca. 200 K/s 150 100 °C to 130 °C ca. 2 K/s 100 2 K/s ca. 5 K/s 50 180 178 forced cooling 14.4 max. Fig. 10 - Reel Dimensions - GS08 300 300 Temperature (°C) 2.5 1.5 250 Fig. 12 - Vishay Leadfree Reflow Soldering Profile (acc. to J-STD-020) 250 4.5 3.5 200 max. 2 cycles allowed 10.0 9.0 120° 150 Time (s) 19470-2 94 8665 0 0 948626-1 50 100 150 200 250 Time (s) Fig. 13 - Double Wave Soldering of Opto Devices (all Packages) Rev. 1.4, 30-Sep-13 Document Number: 81333 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMO31.. www.vishay.com Vishay Semiconductors BAR CODE PRODUCT LABEL RECOMMENDED METHOD OF STORAGE Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: 106 A H VISHAY 37 B C D E F G 20131 • Storage temperature 10 °C to 30 °C • Storage humidity ≤ 60 % RH max. After more than 672 h under these conditions moisture content will be too high for reflow soldering. In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: A) Type of component B) Manufacturing plant C) SEL - selection code (bin): e.g.: J1 = code for luminous intensity group 3 = code for color group D) Date code year/week 192 h at 40 °C + 5 °C / - 0 °C and < 5 % RH (dry air/nitrogen) or 96 h at 60 °C + 5 °C and < 5 % RH for all device containers or 24 h at 100 °C + 5 °C not suitable for reel or tubes. An EIA JEDEC standard JESD22-A112 level 2a label is included on all dry bags. E) Day code (e.g. 3: Wednesday) F) Batch no. G) Total quantity L E V E L CAUTION 2a H) Company code This bag contains MOISTURE –SENSITIVE DEVICES DRY PACKING 1. Shelf life in sealed bag 12 months at <40°C and < 90% relative humidity (RH) The reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transportation and storage. 2. After this bag is opened devices that will be subjected to infrared reflow, vapor-phase reflow, or equivalent processing (peak package body temp. 260°C) must be: a) Mounted within 672 hours at factory condition of < 30°C/60%RH or b) Stored at <10% RH. Aluminum bag 3. Devices require baking before mounting if: a) Humidity Indicator Card is >10% when read at 23°C + 5°C or b) 2a or 2b is not met. Label 4. If baking is required, devices may be baked for: 192 hours at 40°C + 5°C/-0°C and <5%RH (dry air/nitrogen) or o or 96 hours at 60±5 Cand <5%RH For all device containers 24 hours at 100±5°C Not suitable for reels or tubes Bag Seal Date: ______________________________ (If blank, see bar code label) Note: LEVEL defined by EIA JEDEC Standard JESD22-A113 19786 Reel Example of JESD22-A112 level 2a label 15973 FINAL PACKING The sealed reel is packed into a cardboard box. A secondary cardboard box is used for shipping purposes. ESD PRECAUTION Proper storage and handling procedures should be followed to prevent ESD damage to the devices especially when they are removed from the antistatic shielding bag. Electro-static sensitive devices warning labels are on the packaging. VISHAY SEMICONDUCTORS STANDARD BAR CODE LABELS The Vishay Semiconductors standard bar code labels are printed at final packing areas. The labels are on each packing unit and contain Vishay Semiconductors specific data. Rev. 1.4, 30-Sep-13 Document Number: 81333 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000