TEMT6000X01 www.vishay.com Vishay Semiconductors Ambient Light Sensor FEATURES • • • • • • • • • • 18527 Package type: surface mount Package form: 1206 Dimensions (L x W x H in mm): 4 x 2 x 1.05 AEC-Q101 qualified High photo sensitivity Adapted to human eye responsivity Angle of half sensitivity: = ± 60° Floor life: 168 h, MSL 3, acc. J-STD-020 Lead (Pb)-free reflow soldering Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC Note ** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902 DESCRIPTION TEMT6000X01 ambient light sensor is a silicon NPN epitaxial planar phototransistor in a miniature transparent 1206 package for surface mounting. It is sensitive to visible light much like the human eye and has peak sensitivity at 570 nm. APPLICATIONS Ambient light sensor for control of display backlight dimming in LCD displays and keypad backlighting of mobile devices and in industrial on/off-lighting operation. • • • • • • Automotive sensors Mobile phones Notebook computers PDA’s Cameras Dashboards PRODUCT SUMMARY COMPONENT IPCE (μA) (deg) 0.5 (nm) TEMT6000X01 50 ± 60 440 to 800 Note • Test condition see table “Basic Characteristics” ORDERING INFORMATION ORDERING CODE PACKAGING REMARKS PACKAGE FORM TEMT6000X01 Tape and reel MOQ: 3000 pcs, 3000 pcs/reel 1206 Note • MOQ: minimum order quantity ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) SYMBOL VALUE UNIT Collector emitter voltage VCEO 6 V Emitter collector voltage VECO 1.5 V Collector current IC 20 mA Power dissipation PV 100 mW PARAMETER Rev. 1.9, 23-Aug-11 TEST CONDITION Document Number: 81579 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TEMT6000X01 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) TEST CONDITION SYMBOL VALUE UNIT Tj 100 °C Operating temperature range Tamb - 40 to + 100 °C Storage temperature range Tstg - 40 to + 100 °C Acc. reflow solder profile fig. 8 Tsd 260 °C Soldered on PCB with pad dimensions: 4 mm x 4 mm RthJA 450 K/W PARAMETER Junction temperature Soldering temperature Thermal resistance junction/ambient PV - Power Dissipation (mW) 125 100 75 RthJA = 450 K/W 50 25 0 0 94 8308 20 40 60 100 80 Tamb - Ambient Temperature (°C) Fig. 1 - Power Dissipation Limit vs. Ambient Temperature BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) TYP. MAX. UNIT ICEO 3 50 nA VCE = 0 V, f = 1 MHz, E = 0 CCEO 16 EV = 20 lx, CIE illuminant A, VCE = 5 V IPCE EV = 100 lx, CIE illuminant A, VCE = 5 V IPCE 50 CIE illuminant A TKIPCE 1.18 %/K LED, white TKIPCE 0.9 %/K Angle of half sensitivity ± 60 deg Wavelength of peak sensitivity p 570 nm Range of spectral bandwidth 0.5 440 to 800 nm VCEsat 0.1 V PARAMETER Collector emitter breakdown voltage Collector dark current Collector emitter capacitance Collector light current Temperature coefficient of IPCE Collector emitter saturation voltage Rev. 1.9, 23-Aug-11 TEST CONDITION SYMBOL MIN. IC = 0.1 mA VCEO 6 VCE = 5 V, E = 0 EV = 20 lx, CIE illuminant A, IPCE = 1.2 μA 3.5 V 10 pF 16 μA μA Document Number: 81579 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TEMT6000X01 www.vishay.com Vishay Semiconductors VCE = 5 V 10 -7 10 -8 10 -9 10 -10 10 -11 10 -12 10 -13 - 40 19758 - 20 0 20 40 60 80 Tamb - Ambient Temperature (°C) 100 15 10 5 0 0.1 1.0 10.0 VCE - Collector Emitter Voltage (V) 1.0 S(λ)rel - Relative Spectral Sensitivity IPCE rel - Relative Photo Current 20 Fig. 4 - Collector Emitter Capacitance vs. Collector Emitter Voltage 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 19759 f = 1 MHz 19762 Fig. 1 - Collector Dark Current vs. Ambient Temperature 0 25 VCE = 5 V, white LED - 40 - 20 0 20 40 60 80 Tamb - Ambient Temperature (°C) 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 100 20019 Fig. 2 - Relative Photo Current vs. Ambient Temperature 0.0 300 400 500 600 700 800 900 1000 1100 λ - Wavelength (nm) Fig. 5 - Relative Spectral Sensitivity vs. Wavelength 0° 10° 20° 30° Srel - Relative Sensitivity IPCE - Photo Current (µA) 1000 100 10 40° 1.0 0.9 50° 0.8 60° 70° 0.7 ϕ - Angular Displacement ICEO - Collector Dark Current (A) 10 -6 CCE0 - Collector Emitter Capacitance (pF) BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 80° 1 10 19760 100 E v - Illuminance (Ix) Fig. 3 - Photo Current vs. Illuminance Rev. 1.9, 23-Aug-11 0.6 1000 0.4 0.2 0 94 8318 Fig. 6 - Relative Radiant Sensitivity vs. Angular Displacement Document Number: 81579 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TEMT6000X01 www.vishay.com Vishay Semiconductors REFLOW SOLDER PROFILE DRYPACK 300 255 °C 240 °C 217 °C 250 Temperature (°C) max. 260 °C 245 °C Devices are packed in moisture barrier bags (MBB) to prevent the products from moisture absorption during transportation and storage. Each bag contains a desiccant. FLOOR LIFE 200 max. 30 s 150 max. 100 s max. 120 s 100 max. ramp up 3 °C/s max. ramp down 6 °C/s 50 Time between soldering and removing from MBB must not exceed the time indicated in J-STD-020: Moisture sensitivity: level 3 Floor life: 168 h Conditions: Tamb < 30 °C, RH < 60 % DRYING 0 0 19841 50 100 150 200 250 300 Time (s) Fig. 7 - Lead (Pb)-free Reflow Solder Profile acc. J-STD-020D In case of moisture absorption devices should be baked before soldering. Conditions see J-STD-020 or label. Devices taped on reel dry using recommended conditions: 192 h at 40 °C (+ 5 °C), RH < 5 % or 96 h at 60 °C (+ 5 °C), RH < 5 %. PACKAGE DIMENSIONS in millimeters 18464 Rev. 1.9, 23-Aug-11 Document Number: 81579 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TEMT6000X01 www.vishay.com Vishay Semiconductors BLISTER TAPE DIMENSIONS in millimeters 20876 REEL DIMENSIONS in millimeters Volume: 3000 pcs/reel 20874 Rev. 1.9, 23-Aug-11 Document Number: 81579 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000