BSI Certificate 7798

BSI Certificate 7798
www.vishay.com
Vishay Semiconductors
Optocoupler
Test Certificate
Electronic Components
Certificate No
This is to certify that
Submitted by
7798
Optocoupler types as listed in the schedule to this certificate
Vishay Semiconductor GmbH.
Theresienstrasse 2
D-74072 Heilbronn
Germany
Have been tested by BSI in accordance with CP0322 and Test Leaflet 5 to
BS EN 60950-1:2006 + A12:2011 Sub-clauses 2.9.1, 2.9.2, 2.10.1, Annex
G.1.1, Annex G.6, 2.10.4, 2.10.4.3, 2.10.5.2, 2.10.9, 2.10.10, 2.10.11,
2.10.12, 4.7.3.4 (Clauses A.2.1 – A.2.7) and 5.2.2
Details of the scope of the testing are given in BSI report TR/13/439 and
any addenda thereto.
Signed
Issue date
16 March 2013
Expiry date
15 March 2015
Attention is drawn to the conditions under which this certificate is issued, namely:
1.
The Conditions of Contract for Testing (CP0322) and the specific conditions
(Test Leaflet No TL5 or TL22 as stated above) apply in all respects.
2.
This certificate may not be published except in full including any schedule unless
permission for the publication of an approved extract has been obtained in writing from
the Managing Director of Testing Services
3.
This certificate is valid until the expiry date shown above. It shall then be considered
cancelled and withdrawn and shall not be used in any way whatsoever.
4.
If BSI is satisfied that the manufacturer is marketing what is purporting to be the same
model of component but which has been altered or modified or is in any material aspect
different from the item tested or is satisfied in respect of evidence discovered by or
submitted to it that components purported to be identical to that originally certified are
no longer meeting any part of the requirements of the original examination and tests
then the certificate will be immediately withdrawn and shall not be used in any way
whatsoever.
Prepared by: BSI Appliances, Holywell Park, Ashby Road, Loughborough LE11 3AQ.
Revision: 28-Aug-13
Document Number: 83694
1
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BSI Certificate 7798
www.vishay.com
Schedule to Test Certificate No
Schedule Issue date
Test certificate expiry date
Vishay Semiconductors
7798
16 March 2013
15 March 2015
Optocoupler types SFH6*^X-#.... using ‘over-under’ construction (bi-plane)
Using leadframe types 1001-9130-4AC or 0019212-1AC
SFH1617A-1
SFH6156-1
SFH615A-3
SFH615AGR
SFH6186-1
SFH618A-2
SFH1617A-2
SFH6156-2
SFH615A-4
SFH615AY
SFH6186-2
SFH618A-3
SFH1617A-3
SFH6156-3
SFH615AA
SFH617A-1
SFH6186-3
SFH618A-4
SFH1617A-4
SFH6156-4
SFH615ABL
SFH617A-2
SFH6186-4
SFH618A-5
SFH612A
SFH615A-1
SFH615ABM
SFH617A-3
SFH6186-5
SFH619A
SFH614A
SFH615A-2
SFH615AGB
SFH617A-4
SFH618A-1
SFH655A
SFH6106-5
SFH610A-1
SFH628A-2
SFH628A-3
Using leadframe types 1001-9130-4BC or 0019212-1BC
SFH6106-1
SFH610A-2
SFH6106-2
SFH610A-3
SFH6106-3
SFH610A-4
SFH6106-4
SFH610A-5
Using leadframe types 1001-9130-4EC or 0019212-1EC
SFH6206-1
SFH620AGB
SFH628A-4
SFH6206-2
SFH6286-2
SFH6206-3
SFH6286-3
SFH6286-4
1.
2.
3.
4.
5.
6.
7.
8.
Insulation system:
Mains supply voltage:
Working voltage:
Peak working voltage:
Overvoltage category:
Pollution degree:
Flammability Sub-clause 4.7.3.4 (Clause A.2.7):
Maximum operating temperature:
Functional or Basic or Supplementary
d 600 V r.m.s.
d 600 V r.m.s.
640 V
II
2
Pass
100 qC
110 qC (SFH1617-# series only)
1.
2.
Insulation system:
Mains supply voltage:
3.
Working voltage:
4.
5.
6.
7.
8.
Peak working voltage:
Overvoltage category:
Pollution degree:
Flammability Sub-clause 4.7.3.4 (Clause A.2.7):
Maximum operating temperature:
Reinforced
d 300 V r.m.s. (for standard lead form)
d 400 V r.m.s. (for options 6, 7, 8 and 9)
d 300 V r.m.s. (for standard lead form)
d 400 V r.m.s. (for options 6, 7, 8 and 9)
640 V
II
2
Pass
100 qC
110 qC (SFH1617-# series only)
This schedule must be read in conjunction with the test certificate identified
above and may not be published except in full including the certificate.
Prepared by: BSI Appliances, Holywell Park, Ashby Road, Loughborough LE11 3AQ
Revision: 28-Aug-13
Document Number: 83694
2
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000