ISO 9001 CERTIFIED E-Series HMIC Double Balanced Mixer 700 - 1400 MHz EMD40-900L Features * SOIC-8 package * IC process * Low profile * LO Drive +3dBm to +7dBm Description M/A-COM’s EMD40-900L is a passive double balanced mixer in a low cost, surface mount SOIC-8 package. Fabricated using a mature silicon process (HMIC), it is ideally suited for high volume cellular and wireless applications. Typical applications include frequency up/down conversion, modulation and demodulation in GSM, AMPS, DAMPS and JDC frequencies. Schematic Pin Configuration Pin Function Pin Function 1 GND 5 LO 2 GND 6 GND 3 GND 7 GND 4 IF 8 RF NOTE: LO and RF ports may be interchanged with a slight degradation in electrical performance. Ordering Information Part Number EMD40-900L EMD40-900LTR Packaging Tube Tape and Reel Specifications @ 25°C Frequency Range 700 - 1400 MHz Conversion Loss Maximum Mean (x) Sigma (σ) 700 - 800 MHz 9.5 dB 6.40 dB .24 800 - 1000 MHz 8.0 dB 6.09 dB .08 1000 – 1250 MHz 10.5 dB 9.02 dB .21 1250 - 1400 MHz 12.0 dB 11.02 dB .21 L - R Isolation Minimum Typical 700 - 1000 MHz 26.0 dB 34.2 dB 1000 - 1400 MHz 24.0 dB 30.3 dB L - I Isolation Minimum Typical 700 - 1000 MHz 24.0 dB 28.5 dB 1000 - 1400 MHz 21.0 dB 26.5 dB LO VSWR Maximum Typical 700 - 1000 MHz 2.30 1.90 1000 - 1400 MHz 5.00 2.82 RF VSWR Maximum Typical 700 - 1000 MHz 2.60 1.43 1000 - 1400 MHz 4.40 3.35 IF VSWR Maximum Typical DC - 400 MHz 1.80 1.20 Input IP3 Minimum Typical 700 - 1000 MHz 9.0 dBm 13.0 dBm 1000 - 1400 MHz 10.5 dBm 15.2 dBm DC - 500MHz IF 1.0 dB Bandwidth +1.0 dBm Input 1dB Compression Test conditions: LO drive = +7dBm, IF frequency = 60MHz. Mean and sigma, calculated at 750MHz, 850MHz and 1200MHz, represent typical variation within a wafer. S1231E Specifications Subject to Change Without Notice AMP M/A-COM Eurotec * Loughmahon Technology Park * Blackrock * Cork * Ireland * Tel: 353-21-808300 * Fax: 353-21-359935 ISO 9001 CERTIFIED Typical Performance Over Extended Bandwidth Conversion Loss Isolation 5.00 40.00 6.00 35.00 30.00 7.00 +7dBm Isolation (dB) 8.00 9.00 +5dBm 10.00 25.00 LO to IF 20.00 RF to IF 15.00 10.00 +3dBm 11.00 5.00 VSWR 5 1550 1450 1350 1250 25.00 256 235 214 193 171 106 85 0 64 0 1150 IP3 and 1dB Compression IF Frequency (MHz) 43 0 1050 Frequency (MHz) Frequency (MHz) 22.50 4.5 20.00 4 Power (dBm) 17.50 3.5 RF 3 2.5 LO 2 IP3 12.50 10.00 7.50 IF 1.5 15.00 1 dB Compression 1250 1150 1050 950 850 1500 1400 1300 1200 1100 1000 900 800 700 0.00 600 2.50 0 500 0.5 750 5.00 1 650 Isolation (dB) 950 850 550 1550 1450 1350 1250 1150 1050 950 850 750 650 550 750 0.00 12.00 650 Conversion Loss (dB) LO to RF Frequency (MHz) RF anf LO Frequency (MHz) Note: Conversion loss measured with fixed IF frequency of 60MHz. All measurements made with input power of +7dBm. Spurious Table (In dBc below IF, assuming down conversion) RF (n) 0 1 2 3 4 X 24 63 57 75 0 nfLO + mfRF 2 16 8 0 19 29 38 51 46 72 58 61 76 76 75 1 2 3 27 X 36 24 51 63 61 57 72 79 4 0 LO (m) nfLO - mfRF 2 16 8 0 43 14 34 46 37 56 75 55 72 74 73 1 2 3 Absolute Maximum Ratings 27 26 51 73 70 4 Parameter RF Input Power LO Drive Power Operating/Storage Temp. Absolute Maximum +17dBm +17dBm -40°C to +85°C RF = 970 MHz, -10dBm LO = 900 MHz, +7dBm S 1231 E Specifications Subject to Change Without Notice AMP M/A-COM Eurotec * Loughmahon Technology Park * Blackrock * Cork * Ireland * Tel: 353-21-808300 * Fax: 353-21-359935