Filled Solid 5-Mil Copper Cable Spec. 2002

Filled Core Cables
Outside Voice & Data
Filled Solid 5-Mil Copper Cable
Spec. 2002
RUS (REA) PE-39 CU
Core Construction:
Conductors:
• Solid, annealed copper; sizes 19, 22 and
24 AWG
Insulation:
Nominal Cable Data
CATALOG
NUMBER
PAIRS
AWG
O.D.
INCHES
WEIGHT
LBS/MFT
STANDARD
LENGTH (FT)
7525009
7525017
7528508
7525025
7525033
7525058
7525066
7528565
7525074
7525082
7528573
7525090
7528581
7525108
7528599
7528607
7528615
7528623
7525116
7525124
7525132
7525140
7525157
7525165
7525173
7525181
7525199
7525207
7525215
7525223
7525231
7528631
7528649
7528656
6/19
12/19
18/19
25/19
50/19
6/22
12/22
18/22
25/22
50/22
75/22
100/22
150/22
200/22
300/22
400/22
600/22
900/22
6/24
12/24
18/24
25/24
50/24
75/24
100/24
150/24
200/24
300/24
400/24
600/24
900/24
1200/24
1500/24
1800/24
0.55
0.75
0.87
0.97
1.3
0.45
0.56
0.66
0.71
0.95
1.1
1.2
1.4
1.7
2.0
2.3
2.8
3.4
0.43
0.51
0.57
0.61
0.81
0.92
1.0
1.2
1.3
1.6
1.9
2.2
2.7
3.1
3.4
3.7
170
300
410
525
960
105
170
235
285
505
715
885
1260
1670
2440
3200
4790
6970
95
135
170
200
355
475
610
855
1070
1610
2070
3040
4440
5890
7230
8480
5000
5000
5000
5000
2500
5000
5000
5000
5000
5000
5000
2500
2500
2500
1250
1250
1250
800
5000
5000
5000
5000
5000
5000
5000
5000
2500
2500
2500
1250
1250
1000
800
700
• Solid, high density polyethylene, color
coded in accordance with telephone
industry standards
Twisted Pairs:
• Insulated conductors are twisted into
pairs with varying lay lengths to minimize
crosstalk
Core Assembly:
• 25 pairs and less: pairs are assembled
together in a single group
• More than 25 pairs: pairs are arranged in
groups, each group having a color coded
unit binder
Filling Compound:
• The entire core assembly is completely
filled with ETPR compound, filling the
interstices between the pairs and under
the core tape
Core Wrap:
• Non-hygroscopic dielectric tape applied
longitudinally with an overlap
Sheath:
Copper Shield:
• Corrugated, bare 0.005" copper tape
applied longitudinally with an overlap
• The sheath interfaces are flooded with
an adhesive water blocking compound
Jacket:
• Black, linear low density polyethylene
Application(s):
• Intended for duct and direct buried
installations where protection against
water and moisture entry is required
Compliance:
• Rural Utilities Service (RUS)
7 CFR 1755.390
(REA PE-39)
Packaging:
• Standard lengths are shipped on
non-returnable wood reels
• Non-standard packaging is available upon
request
Data subject to change without notice. Contact your Customer Service Representative for latest information.
13